What's new in Sudo 1.7.10p7? * A time stamp file with the date set to the epoch by "sudo -k" is now completely ignored regardless of what the local clock is set to. Previously, if the local clock was set to a value between the epoch and the time stamp timeout value, a time stamp reset by "sudo -k" would be considered current. * Fixed the sudo exit status when "sudo -l command" is run. This is a regression introduced in version 1.7.10. What's new in Sudo 1.7.10p6? * Fixed the restoration of SIGINT, SIGQUIT and SIGTSTP. This is a regression introduced in version 1.7.10p4. * The tty-specific time stamp file now includes the session ID of the sudo process that created it. If a process with the same tty but a different session ID runs sudo, the user will now be prompted for a password (assuming authentication is required for the command). What's new in Sudo 1.7.10p5? * On systems where the controlling tty can be determined via /proc or sysctl(), sudo will no longer fall back to using ttyname() if the process has no controlling tty. This prevents sudo from using a non-controlling tty for logging and time stamp purposes. * Fixed a potential crash in visudo's alias cycle detection. What's new in Sudo 1.7.10p4? * Avoid building PIE binaries on FreeBSD/ia64 as they don't run properly. * Fixed a crash in visudo strict mode when an unknown Defaults setting is encountered. * Do not inform the user that the command was not permitted by the policy if they do not successfully authenticate. This is a regression introduced in sudo 1.7.10. * Fix running commands that need the terminal in the background when I/O logging is enabled. E.g. "sudo vi &". When the command is foregrounded, it will now resume properly. What's new in Sudo 1.7.10p3? * Fixed post-processing of the man pages on systems with legacy versions of sed. * Fixed "sudoreplay -l" on Linux systems with file systems that set DT_UNKNOWN in the d_type field of struct dirent. What's new in Sudo 1.7.10p2? * Fixed suspending a command after it has already been resumed once when I/O logging (or use_pty) is not enabled. This was a regression introduced in version 1.7.10. What's new in Sudo 1.7.10p1? * Fixed the setting of LOGNAME, USER and USERNAME variables in the command's environment when env_reset is enabled (the default). This was a regression introduced in version 1.7.10. * Sudo now honors SUCCESS=return in /etc/nsswitch.conf. What's new in Sudo 1.7.10? * Sudo is now built with the -fstack-protector flag if the the compiler supports it. Also, the -zrelro linker flag is used if supported. The --disable-hardening configure option can be used to build sudo without stack smashing protection. * Sudo is now built as a Position Independent Executable (PIE) if supported by the compiler and linker. * If the user is a member of the "exempt" group in sudoers, they will no longer be prompted for a password even if the -k flag is specified with the command. This makes "sudo -k command" consistent with the behavior one would get if the user ran "sudo -k" immediately before running the command. * The sudoers file may now be a symbolic link. Previously, sudo would refuse to read sudoers unless it was a regular file. * The user/group/mode checks on sudoers files have been relaxed. As long as the file is owned by the sudoers uid, not world-writable and not writable by a group other than the sudoers gid, the file is considered OK. Note that visudo will still set the mode to the value specified at configure time. * /etc/environment is no longer read directly on Linux systems when PAM is used. Sudo now merges the PAM environment into the user's environment which is typically set by the pam_env module. * The initial evironment created when env_reset is in effect now includes the contents of /etc/environment on AIX systems and the "setenv" and "path" entries from /etc/login.conf on BSD systems. * On systems with an SVR4-style /proc file system, the /proc/pid/psinfo file is now uses to determine the controlling terminal, if possible. This allows tty-based tickets to work properly even when, e.g. standard input, output and error are redirected to /dev/null. * The output of "sudoreplay -l" is now sorted by file name (or sequence number). Previously, entries were displayed in the order in which they were found on the file system. * The sudoreplay command can now properly replay sessions where no tty was present. * Sudo now behaves properly when I/O logging is enabled and the controlling terminal is revoked (e.g. the running sshd is killed). Previously, sudo may have exited without calling the I/O plugin's close function which can lead to an incomplete I/O log. * Sudo can now detect when a user has logged out and back in again on Solaris 11, just like it can on Solaris 10. * The built-in zlib included with Sudo has been upgraded to version 1.2.6. * Setting the SSL parameter to start_tls in ldap.conf now works properly when using Mozilla-based SDKs that support the ldap_start_tls_s() function. * The TLS_CHECKPEER parameter in ldap.conf now works when the Mozilla NSS crypto backend is used with OpenLDAP. * Improved support for the Tivoli Directory Server LDAP client libraries. This includes support for using LDAP over SSL (ldaps) as well as support for the BIND_TIMELIMIT, TLS_KEY and TLS_CIPHERS ldap.conf options. A new ldap.conf option, TLS_KEYPW can be used to specify a password to decrypt the key database. * Fixed a crash introduced in version 1.7.7 when "sudo -s" is specified with a command. * If a user fails to authenticate and the command would be rejected by sudoers, it is now logged with "command not allowed" instead of "N incorrect password attempts". Likewise, the "mail_no_perms" sudoers option now takes precedence over "mail_badpass". * The sudo manuals are now formatted using the mdoc macros. Versions using the legacy man macros are provided for systems that lack mdoc. * Fixed a problem with the reboot and shutdown commands on some systems (such as HP-UX and BSD). On these systems, reboot sends all processes (except itself) SIGTERM. When sudo received SIGTERM, it would relay it to the reboot process, thus killing reboot before it had a chance to actually reboot the system. * Visudo will now warn about unknown Defaults entries that are per-host, per-user, per-runas or per-command. * When constructing a time filter for use with LDAP sudoNotBefore and sudoNotAfter attributes, the current time now includes tenths of a second. This fixes a problem with timed entries on Active Directory. * Fixed a race condition that could cause sudo to receive SIGTTOU (and stop) when resuming a shell that was run via sudo when I/O logging (and use_pty) is not enabled. * Sending SIGTSTP directly to the sudo process will now suspend the running command when I/O logging (and use_pty) is not enabled. What's new in Sudo 1.7.9p1? * Fixed a bug when matching against an IP address with an associated netmask in the sudoers file. In certain circumstances, this could allow users to run commands on hosts they are not authorized for. What's new in Sudo 1.7.9? * Fixed a false positive in visudo strict mode when aliases are in use. * The line on which a syntax error is reported in the sudoers file is now more accurate. Previously it was often off by a line. * The #include and #includedir directives in sudoers now support relative paths. If the path is not fully qualified it is expected to be located in the same directory of the sudoers file that is including it. * visudo will now fix the mode on the sudoers file even if no changes are made unless the -f option is specified. * The "use_loginclass" sudoers option works properly again. * For LDAP-based sudoers, values in the search expression are now escaped as per RFC 4515. * Fixed a race condition when I/O logging is not enabled that could result in tty-generated signals (e.g. control-C) being received by the command twice. * If none of the standard input, output or error are connected to a tty device, sudo will now check its parent's standard input, output or error for the tty name on systems with /proc and BSD systems that support the KERN_PROC_PID sysctl. This allows tty-based tickets to work properly even when, e.g. standard input, output and error are redirected to /dev/null. * Fixed a bug where a pattern like "/usr/*" included /usr/bin/ in the results, which would be incorrectly be interpreted as if the sudoers file had specified a directory. * "visudo -c" will now list any include files that were checked in addition to the main sudoers file when everything parses OK. * Users that only have read-only access to the sudoers file may now run "visudo -c". Previously, write permissions were required even though no writing is down in check-only mode. What's new in Sudo 1.7.8p2? * Fixed a crash in the monitor process on Solaris when NOPASSWD was specified or when authentication was disabled. What's new in Sudo 1.7.8p1? * Fixed matching of a Runas_Alias in the group section of a Runas_Spec. What's new in Sudo 1.7.8? * Sudo will now use PAM by default on AIX 6 and higher. * Added --enable-werror configure option for gcc's -Werror flag. * Visudo no longer assumes all editors support the +linenumber command line argument. It now uses a whitelist of editors known to support the option. * Fixed matching of network addresses when a netmask is specified but the address is not the first one in the CIDR block. * The configure script now check whether or not errno.h declares the errno variable. Previously, sudo would always declare errno itself for older systems that don't declare it in errno.h. * The NOPASSWD tag is now honored for denied commands too, which matches historic sudo behavior (prior to sudo 1.7.0). * Sudo now honors the "DEREF" setting in ldap.conf which controls how alias dereferencing is done during an LDAP search. * Using the -n option may in conjunction with the -v or -l option no longer results in a usage error. * The LOGNAME, USER and USERNAME environment variables are preserved correctly again in sudoedit mode. What's new in Sudo 1.7.7 * I/O logging is now supported for commands run in background mode (using sudo's -b flag). * Group ownership of the sudoers file is now only enforced when the file mode on sudoers allows group readability or writability. * Visudo now checks the contents of an alias and warns about cycles when the alias is expanded. * If the user specifes a group via sudo's -g option that matches the target user's group in the password database, it is now allowed even if no groups are present in the Runas_Spec. * "sudo -i command" now works correctly with the bash version 2.0 and higher. Previously, the .bash_profile would not be sourced prior to running the command unless bash was built with NON_INTERACTIVE_LOGIN_SHELLS defined. * Multi-factor authentication is now supported on AIX. * Added support for non-RFC 4517 compliant LDAP servers that require that seconds be present in a timestamp, such as Tivoli Directory Server. * If the group vector is to be preserved, the PATH search for the command is now done with the user's original group vector. * For LDAP-based sudoers, the "runas_default" sudoOption now works properly in a sudoRole that contains a sudoCommand. * Spaces in command line arguments for "sudo -s" and "sudo -i" are now escaped with a backslash when checking the sudoers file. What's new in Sudo 1.7.6p2 * Two-character CIDR-style IPv4 netmasks are now matched correctly in the sudoers file. * A build error with MIT Kerberos V has been resolved. What's new in Sudo 1.7.6p1 * A non-existent includedir is now treated the same as an empty directory and not reported as an error. * Removed extraneous parens in LDAP filter when sudoers_search_filter is enabled that can cause an LDAP search error. What's new in Sudo 1.7.6? * A new LDAP setting, sudoers_search_filter, has been added to ldap.conf. This setting can be used to restrict the set of records returned by the LDAP query. Based on changes from Matthew Thomas. * White space is now permitted within a User_List when used in conjunction with a per-user Defaults definition. * A group ID (%#gid) may now be specified in a User_List or Runas_List. Likewise, for non-Unix groups the syntax is %:#gid. * Support for double-quoted words in the sudoers file has been fixed. The change in 1.7.5 for escaping the double quote character caused the double quoting to only be available at the beginning of an entry. * The fix for resuming a suspended shell in 1.7.5 caused problems with resuming non-shells on Linux. Sudo will now save the process group ID of the program it is running on suspend and restore it when resuming, which fixes both problems. * A bug that could result in corrupted output in "sudo -l" has been fixed. What's new in Sudo 1.7.5? * When using visudo in check mode, a file named "-" may be used to check sudoers data on the standard input. * Sudo now only fetches shadow password entries when using the password database directly for authentication. * Password and group entries are now cached using the same key that was used to look them up. This fixes a problem when looking up entries by name if the name in the retrieved entry does not match the name used to look it up. This may happen on some systems that do case insensitive lookups or that truncate long names. * GCC will no longer display warnings on glibc systems that use the warn_unused_result attribute for write(2) and other system calls. * If a PAM account management module denies access, sudo now prints a more useful error message and stops trying to validate the user. * Fixed a potential hang on idle systems when the sudo-run process exits immediately. * Sudo now includes a copy of zlib that will be used on systems that do not have zlib installed. * The --with-umask-override configure flag has been added to enable the "umask_override" sudoers Defaults option at build time. * Sudo now unblocks all signals on startup to avoid problems caused by the parent process changing the default signal mask. * LDAP Sudoers entries may now specify a time period for which the entry is valid. This requires an updated sudoers schema that includes the sudoNotBefore and sudoNotAfter attributes. Support for timed entries must be explicitly enabled in the ldap.conf file. Based on changes from Andreas Mueller. * LDAP Sudoers entries may now specify a sudoOrder attribute that determines the order in which matching entries are applied. The last matching entry is used, just like file-based sudoers. This requires an updated sudoers schema that includes the sudoOrder attribute. Based on changes from Andreas Mueller. * When run as sudoedit, or when given the -e flag, sudo now treats command line arguments as pathnames. This means that slashes in the sudoers file entry must explicitly match slashes in the command line arguments. As a result, and entry such as: user ALL = sudoedit /etc/* will allow editing of /etc/motd but not /etc/security/default. * NETWORK_TIMEOUT is now an alias for BIND_TIMELIMIT in ldap.conf for compatibility with OpenLDAP configuration files. * The LDAP API TIMEOUT parameter is now honored in ldap.conf. * The I/O log directory may now be specified in the sudoers file. * Sudo will no longer refuse to run if the sudoers file is writable by root. * Sudo now performs command line escaping for "sudo -s" and "sudo -i" after validating the command so the sudoers entries do not need to include the backslashes. * Logging and email sending are now done in the locale specified by the "sudoers_locale" setting ("C" by default). Email send by sudo now includes MIME headers when "sudoers_locale" is not "C". * The configure script has a new option, --disable-env-reset, to allow one to change the default for the sudoers Default setting "env_reset" at compile time. * When logging "sudo -l command", sudo will now prepend "list " to the command in the log line to distinguish between an actual command invocation in the logs. * Double-quoted group and user names may now include escaped double quotes as part of the name. Previously this was a parse error. * Sudo once again restores the state of the signal handlers it modifies before executing the command. This allows sudo to be used with the nohup command. * Resuming a suspended shell now works properly when I/O logging is not enabled (the I/O logging case was already correct). What's new in Sudo 1.7.4p6? * A bug has been fixed in the I/O logging support that could cause visual artifacts in full-screen programs such as text editors. What's new in Sudo 1.7.4p5? * A bug has been fixed that would allow a command to be run without the user entering a password when sudo's -g flag is used without the -u flag. * If user has no supplementary groups, sudo will now fall back on checking the group file explicitly, which restores historic sudo behavior. * A crash has been fixed when sudo's -g flag is used without the -u flag and the sudoers file contains an entry with no runas user or group listed. * A crash has been fixed when the Solaris project support is enabled and sudo's -g flag is used without the -u flag. * Sudo no longer exits with an error when support for auditing is compiled in but auditing is not enabled. * Fixed a bug introduced in sudo 1.7.3 where the ticket file was not being honored when the "targetpw" sudoers Defaults option was enabled. * The LOG_INPUT and LOG_OUTPUT tags in sudoers are now parsed correctly. * A crash has been fixed in "sudo -l" when sudo is built with auditing support and the user is not allowed to run any commands on the host. What's new in Sudo 1.7.4p4? * A potential security issue has been fixed with respect to the handling of sudo's -g command line option when -u is also specified. The flaw may allow an attacker to run commands as a user that is not authorized by the sudoers file. * A bug has been fixed where "sudo -l" output was incomplete if multiple sudoers sources were defined in nsswitch.conf and there was an error querying one of the sources. * The log_input, log_output, and use_pty sudoers options now work correctly on AIX. Previously, sudo would hang if they were enabled. * The "make install" target now works correctly when sudo is built in a directory other than the source directory. * The "runas_default" sudoers setting now works properly in a per-command Defaults line. * Suspending and resuming the bash shell when PAM is in use now works correctly. The SIGCONT signal was not propagated to the child process. What's new in Sudo 1.7.4p3? * A bug has been fixed where duplicate HOME environment variables could be present when the env_reset setting was disabled and the always_set_home setting was enabled in sudoers. * The value of sysconfdir is now substituted into the path to the sudoers.d directory in the installed sudoers file. * Compilation problems on IRIX and other platforms have been fixed. * If multiple PAM "auth" actions are specified and the user enters ^C at the password prompt, sudo will no longer prompt for a password for any subsequent "auth" actions. Previously it was necessary to enter ^C for each "auth" action. What's new in Sudo 1.7.4p2? * A bug where sudo could spin in a busy loop waiting for the child process has been fixed. What's new in Sudo 1.7.4p1? * A bug introduced in sudo 1.7.3 that prevented the -k and -K options from functioning when the tty_tickets sudoers option is enabled has been fixed. * Sudo no longer prints a warning when the -k or -K options are specified and the ticket file does not exist. * It is now easier to cross-compile sudo. What's new in Sudo 1.7.4? * Sudoedit will now preserve the file extension in the name of the temporary file being edited. The extension is used by some editors (such as emacs) to choose the editing mode. * Time stamp files have moved from /var/run/sudo to either /var/db/sudo, /var/lib/sudo or /var/adm/sudo. The directories are checked for existence in that order. This prevents users from receiving the sudo lecture every time the system reboots. Time stamp files older than the boot time are ignored on systems where it is possible to determine this. * The tty_tickets sudoers option is now enabled by default. * Ancillary documentation (README files, LICENSE, etc) is now installed in a sudo documentation directory. * Sudo now recognizes "tls_cacert" as an alias for "tls_cacertfile" in ldap.conf. * Defaults settings that are tied to a user, host or command may now include the negation operator. For example: Defaults:!millert lecture will match any user but millert. * The default PATH environment variable, used when no PATH variable exists, now includes /usr/sbin and /sbin. * Sudo now uses polypkg (http://rc.quest.com/topics/polypkg/) for cross-platform packing. * On Linux, sudo will now restore the nproc resource limit before executing a command, unless the limit appears to have been modified by pam_limits. This avoids a problem with bash scripts that open more than 32 descriptors on SuSE Linux, where sysconf(_SC_CHILD_MAX) will return -1 when RLIMIT_NPROC is set to RLIMIT_UNLIMITED (-1). * The HOME and MAIL environment variables are now reset based on the target user's password database entry when the env_reset sudoers option is enabled (which is the case in the default configuration). Users wishing to preserve the original values should use a sudoers entry like: Defaults env_keep += HOME to preserve the old value of HOME and Defaults env_keep += MAIL to preserve the old value of MAIL. * Fixed a problem in the restoration of the AIX authdb registry setting. * Sudo will now fork(2) and wait until the command has completed before calling pam_close_session(). * The default syslog facility is now "authpriv" if the operating system supports it, else "auth". What's new in Sudo 1.7.3? * Support for logging I/O for the command being run. For more information, see the documentation for the "log_input" and "log_output" Defaults options in the sudoers manual. Also see the sudoreplay manual for how to replay I/O log sessions. * The use_pty sudoers option can be used to force a command to be run in a pseudo-pty, even when I/O logging is not enabled. * On some systems, sudo can now detect when a user has logged out and back in again when tty-based time stamps are in use. Supported systems include Solaris systems with the devices file system, Mac OS X, and Linux systems with the devpts filesystem (pseudo-ttys only). * On AIX systems, the registry setting in /etc/security/user is now taken into account when looking up users and groups. Sudo now applies the correct the user and group ids when running a command as a user whose account details come from a different source (e.g. LDAP or DCE vs. local files). * Support for multiple 'sudoers_base' and 'uri' entries in ldap.conf. When multiple entries are listed, sudo will try each one in the order in which they are specified. * Sudo's SELinux support should now function correctly when running commands as a non-root user and when one of stdin, stdout or stderr is not a terminal. * Sudo will now use the Linux audit system with configure with the --with-linux-audit flag. * Sudo now uses mbr_check_membership() on systems that support it to determine group membership. Currently, only Darwin (Mac OS X) supports this. * When the tty_tickets sudoers option is enabled but there is no terminal device, sudo will no longer use or create a tty-based ticket file. Previously, sudo would use a tty name of "unknown". As a consequence, if a user has no terminal device, sudo will now always prompt for a password. * The passwd_timeout and timestamp_timeout options may now be specified as floating point numbers for more granular timeout values. * Negating the fqdn option in sudoers now works correctly when sudo is configured with the --with-fqdn option. In previous versions of sudo the fqdn was set before sudoers was parsed. What's new in Sudo 1.7.2? * A new #includedir directive is available in sudoers. This can be used to implement an /etc/sudo.d directory. Files in an includedir are not edited by visudo unless they contain a syntax error. * The -g option did not work properly when only setting the group (and not the user). Also, in -l mode the wrong user was displayed for sudoers entries where only the group was allowed to be set. * Fixed a problem with the alias checking in visudo which could prevent visudo from exiting. * Sudo will now correctly parse the shell-style /etc/environment file format used by pam_env on Linux. * When doing password and group database lookups, sudo will only cache an entry by name or by id, depending on how the entry was looked up. Previously, sudo would cache by both name and id from a single lookup, but this breaks sites that have multiple password or group database names that map to the same uid or gid. * User and group names in sudoers may now be enclosed in double quotes to avoid having to escape special characters. * BSM audit fixes when changing to a non-root uid. * Experimental non-Unix group support. Currently only works with Quest Authorization Services and allows Active Directory groups fixes for Minix-3. * For Netscape/Mozilla-derived LDAP SDKs the certificate and key paths may be specified as a directory or a file. However, version 5.0 of the SDK only appears to support using a directory (despite documentation to the contrary). If SSL client initialization fails and the certificate or key paths look like they could be default file name, strip off the last path element and try again. * A setenv() compatibility fix for Linux systems, where a NULL value is treated the same as an empty string and the variable name is checked against the NULL pointer. What's new in Sudo 1.7.1? * A new Defaults option "pwfeedback" will cause sudo to provide visual feedback when the user is entering a password. * A new Defaults option "fast_glob" will cause sudo to use the fnmatch() function for file name globbing instead of glob(). When this option is enabled, sudo will not check the file system when expanding wildcards. This is faster but a side effect is that relative paths with wildcard will no longer work. * New BSM audit support for systems that support it such as FreeBSD and Mac OS X. * The file name specified with the #include directive may now include a %h escape which is expanded to the short form of hostname. * The -k flag may now be specified along with a command, causing the user's timestamp file to be ignored. * New support for Tivoli-based LDAP START_TLS, present in AIX. * New support for /etc/netsvc.conf on AIX. * The unused alias checks in visudo now handle the case of an alias referring to another alias. What's new in Sudo 1.7.0? * Rewritten parser that converts sudoers into a set of data structures. This eliminates a number of ordering issues and makes it possible to apply sudoers Defaults entries before searching for the command. It also adds support for per-command Defaults specifications. * Sudoers now supports a #include facility to allow the inclusion of other sudoers-format files. * Sudo's -l (list) flag has been enhanced: o applicable Defaults options are now listed o a command argument can be specified for testing whether a user may run a specific command. o a new -U flag can be used in conjunction with "sudo -l" to allow root (or a user with "sudo ALL") list another user's privileges. * A new -g flag has been added to allow the user to specify a primary group to run the command as. The sudoers syntax has been extended to include a group section in the Runas specification. * A uid may now be used anywhere a username is valid. * The "secure_path" run-time Defaults option has been restored. * Password and group data is now cached for fast lookups. * The file descriptor at which sudo starts closing all open files is now configurable via sudoers and, optionally, the command line. * Visudo will now warn about aliases that are defined but not used. * The -i and -s command line flags now take an optional command to be run via the shell. Previously, the argument was passed to the shell as a script to run. * Improved LDAP support. SASL authentication may now be used in conjunction when connecting to an LDAP server. The krb5_ccname parameter in ldap.conf may be used to enable Kerberos. * Support for /etc/nsswitch.conf. LDAP users may now use nsswitch.conf to specify the sudoers order. E.g.: sudoers: ldap files to check LDAP, then /etc/sudoers. The default is "files", even when LDAP support is compiled in. This differs from sudo 1.6 where LDAP was always consulted first. * Support for /etc/environment on AIX and Linux. If sudo is run with the -i flag, the contents of /etc/environment are used to populate the new environment that is passed to the command being run. * If no terminal is available or if the new -A flag is specified, sudo will use a helper program to read the password if one is configured. Typically, this is a graphical password prompter such as ssh-askpass. * A new Defaults option, "mailfrom" that sets the value of the "From:" field in the warning/error mail. If unspecified, the login name of the invoking user is used. * A new Defaults option, "env_file" that refers to a file containing environment variables to be set in the command being run. * A new flag, -n, may be used to indicate that sudo should not prompt the user for a password and, instead, exit with an error if authentication is required. * If sudo needs to prompt for a password and it is unable to disable echo (and no askpass program is defined), it will refuse to run unless the "visiblepw" Defaults option has been specified. * Prior to version 1.7.0, hitting enter/return at the Password: prompt would exit sudo. In sudo 1.7.0 and beyond, this is treated as an empty password. To exit sudo, the user must press ^C or ^D at the prompt. * visudo will now check the sudoers file owner and mode in -c (check) mode when the -s (strict) flag is specified. * A new Defaults option "umask_override" will cause sudo to set the umask specified in sudoers even if it is more permissive than the invoking user's umask.