&author.jht; &author.mimir; &person.jelmer;drawing StephenLangasek
vorlon@netexpress.net
April 3, 2003
Interdomain Trust Relationships Interdomain Trusts Samba-3 supports NT4 style domain trust relationships. This is feature that many sites will want to use if they migrate to Samba-3 from and NT4 style domain and do NOT want to adopt Active Directory or an LDAP based authentication back end. This section explains some background information regarding trust relationships and how to create them. It is now possible for Samba-3 to trust NT4 (and vice versa), as well as to create Samba3-to-Samba3 trusts. Features and Benefits Samba-3 can participate in Samba-to-Samba as well as in Samba-to-MS Windows NT4 style trust relationships. This imparts to Samba similar scalability as is possible with MS Windows NT4. Given that Samba-3 has the capability to function with a scalable backend authentication database such as LDAP, and given it's ability to run in Primary as well as Backup Domain control modes, the administrator would be well advised to consider alternatives to the use of Interdomain trusts simply because by the very nature of how this works it is fragile. That was, after all, a key reason for the development and adoption of Microsoft Active Directory. Trust Relationship Background MS Windows NT3.x/4.0 type security domains employ a non-hierarchical security structure. The limitations of this architecture as it affects the scalability of MS Windows networking in large organisations is well known. Additionally, the flat namespace that results from this design significantly impacts the delegation of administrative responsibilities in large and diverse organisations. Microsoft developed Active Directory Service (ADS), based on Kerberos and LDAP, as a means of circumventing the limitations of the older technologies. Not every organisation is ready or willing to embrace ADS. For small companies the older NT4 style domain security paradigm is quite adequate, there thus remains an entrenched user base for whom there is no direct desire to go through a disruptive change to adopt ADS. Microsoft introduced with MS Windows NT the ability to allow differing security domains to affect a mechanism so that users from one domain may be given access rights and privileges in another domain. The language that describes this capability is couched in terms of Trusts. Specifically, one domain will trust the users from another domain. The domain from which users are available to another security domain is said to be a trusted domain. The domain in which those users have assigned rights and privileges is the trusting domain. With NT3.x/4.0 all trust relationships are always in one direction only, thus if users in both domains are to have privileges and rights in each others' domain, then it is necessary to establish two (2) relationships, one in each direction. In an NT4 style MS security domain, all trusts are non-transitive. This means that if there are three (3) domains (let's call them RED, WHITE, and BLUE) where RED and WHITE have a trust relationship, and WHITE and BLUE have a trust relationship, then it holds that there is no implied trust between the RED and BLUE domains. ie: Relationships are explicit and not transitive. New to MS Windows 2000 ADS security contexts is the fact that trust relationships are two-way by default. Also, all inter-ADS domain trusts are transitive. In the case of the RED, WHITE and BLUE domains above, with Windows 2000 and ADS the RED and BLUE domains CAN trust each other. This is an inherent feature of ADS domains. Samba-3 implements MS Windows NT4 style Interdomain trusts and interoperates with MS Windows 200x ADS security domains in similar manner to MS Windows NT4 style domains. Native MS Windows NT4 Trusts Configuration There are two steps to creating an interdomain trust relationship. To effect a two-way trust relationship it is necessary for each domain administrator to create a trust account for the other domain to use in verifying security credentials. Interdomain Trustscreating Creating an NT4 Domain Trust For MS Windows NT4, all domain trust relationships are configured using the Domain User Manager. This is done from the Domain User Manager Policies entry on the menu bar. From the Policy menu, select Trust Relationships. Next to the lower box labelled Permitted to Trust this Domain are two buttons, Add and Remove. The Add button will open a panel in which to enter the name of the remote domain that will be able to assign access rights to users in your domain. You will also need to enter a password for this trust relationship, which the trusting domain will use when authenticating users from the trusted domain. The password needs to be typed twice (for standard confirmation). Completing an NT4 Domain Trust Interdomain Trustscompleting A trust relationship will work only when the other (trusting) domain makes the appropriate connections with the trusted domain. To consummate the trust relationship the administrator will launch the Domain User Manager, from the menu select Policies, then select Trust Relationships, then click on the Add button that is next to the box that is labelled Trusted Domains. A panel will open in which must be entered the name of the remote domain as well as the password assigned to that trust. Inter-Domain Trust Facilities Interdomain TrustsFacilities A two-way trust relationship is created when two one-way trusts are created, one in each direction. Where a one-way trust has been established between two MS Windows NT4 domains (let's call them DomA and DomB) the following facilities are created: trusts1Trusts overview DomA (completes the trust connection) Trusts DomB DomA is the Trusting domain DomB is the Trusted domain (originates the trust account) Users in DomB can access resources in DomA Users in DomA can NOT access resources in DomB Global groups from DomB CAN be used in DomA Global groups from DomA can NOT be used in DomB DomB DOES appear in the logon dialog box on client workstations in DomA DomA does NOT appear in the logon dialog box on client workstations in DomB Users / Groups in a trusting domain can NOT be granted rights, permissions or access to a trusted domain. The trusting domain CAN access and use accounts (Users / Global Groups) in the trusted domain. Administrators of the trusted domain CAN be granted admininstrative rights in the trusting domain. Users in a trusted domain CAN be given rights and privileges in the trusting domain. Trusted domain Global Groups CAN be given rights and permissions in the trusting domain. Global Groups from the trusted domain CAN be made members in Local Groups on MS Windows domain member machines. Configuring Samba NT-style Domain Trusts This description is meant to be a fairly short introduction about how to set up a Samba server so that it could participate in interdomain trust relationships. Trust relationship support in Samba is in its early stage, so lot of things don't work yet. Each of the procedures described below assumes the peer domain in the trust relationship is controlled by a Windows NT4 server. However, the remote end could just as well be another Samba-3 domain. It can be clearly seen, after reading this document, that combining Samba-specific parts of what's written below leads to trust between domains in a purely Samba environment. Samba as the Trusted Domain In order to set the Samba PDC to be the trusted party of the relationship you first need to create a special account for the domain that will be the trusting party. To do that, you can use the 'smbpasswd' utility. Creating the trusted domain account is very similar to creating a trusted machine account. Suppose, your domain is called SAMBA, and the remote domain is called RUMBA. The first step will be to issue this command from your favourite shell: &rootprompt; smbpasswd -a -i rumba New SMB password: XXXXXXXX Retype SMB password: XXXXXXXX Added user rumba$ where means to add a new account into the passdb database and means: ''create this account with the InterDomain trust flag'' The account name will be 'rumba$' (the name of the remote domain) After issuing this command you'll be asked to enter the password for the account. You can use any password you want, but be aware that Windows NT will not change this password until 7 days following account creation. After the command returns successfully, you can look at the entry for the new account (in the standard way as appropriate for your configuration) and see that account's name is really RUMBA$ and it has the 'I' flag set in the flags field. Now you're ready to confirm the trust by establishing it from Windows NT Server. User Manager Open User Manager for Domains and from the Policies menu, select Trust Relationships.... Right beside the Trusted domains list box press the Add... button. You will be prompted for the trusted domain name and the relationship password. Type in SAMBA, as this is the name of the remote domain, and the password used at the time of account creation. Press OK and, if everything went without incident, you will see Trusted domain relationship successfully established message. Samba as the Trusting Domain This time activities are somewhat reversed. Again, we'll assume that your domain controlled by the Samba PDC is called SAMBA and NT-controlled domain is called RUMBA. The very first step is to add an account for the SAMBA domain on RUMBA's PDC. User Manager Launch the Domain User Manager, then from the menu select Policies, Trust Relationships. Now, next to the Trusted Domains box press the Add button, and type in the name of the trusted domain (SAMBA) and the password to use in securing the relationship. The password can be arbitrarily chosen. It is easy to change the password from the Samba server whenever you want. After confirming the password your account is ready for use. Now it's Samba's turn. Using your favourite shell while being logged in as root, issue this command: &rootprompt;net rpc trustdom establish rumba You will be prompted for the password you just typed on your Windows NT4 Server box. Do not worry if you see an error message that mentions a return code of NT_STATUS_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT. It means the password you gave is correct and the NT4 Server says the account is ready for interdomain connection and not for ordinary connection. After that, be patient; it can take a while (especially in large networks), but eventually you should see the Success message. Congratulations! Your trust relationship has just been established. Note that you have to run this command as root because you must have write access to the secrets.tdb file. NT4-style Domain Trusts with Windows 2000 Although Domain User Manager is not present in Windows 2000, it is also possible to establish an NT4-style trust relationship with a Windows 2000 domain controller running in mixed mode as the trusting server. It should also be possible for Samba to trust a Windows 2000 server, however, more testing is still needed in this area. After creating the interdomain trust account on the Samba server as described above, open Active Directory Domains and Trusts on the AD controller of the domain whose resources you wish Samba users to have access to. Remember that since NT4-style trusts are not transitive, if you want your users to have access to multiple mixed-mode domains in your AD forest, you will need to repeat this process for each of those domains. With Active Directory Domains and Trusts open, right-click on the name of the Active Directory domain that will trust our Samba domain and choose Properties, then click on the Trusts tab. In the upper part of the panel, you will see a list box labelled Domains trusted by this domain:, and an Add... button next to it. Press this button, and just as with NT4, you will be prompted for the trusted domain name and the relationship password. Press OK, and after a moment, Active Directory will respond with The trusted domain has been added and the trust has been verified. Your Samba users can now be granted acess to resources in the AD domain. Common Errors Interdomain trust relationships should NOT be attempted on networks that are unstable or that suffer regular outages. Network stability and integrity are key concerns with distributed trusted domains.