<!doctype html public "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <title>Postfix SASL Howto</title> <meta http-equiv="Content-Type" content="text/html; charset=us-ascii"> </head> <body> <h1><img src="postfix-logo.jpg" width="203" height="98" ALT="">Postfix SASL Howto</h1> <hr> <h2>WARNING</h2> <p> People who go to the trouble of installing Postfix may have the expectation that Postfix is more secure than some other mailers. The Cyrus SASL library is a lot of code. With this, Postfix becomes as secure as other mail systems that use the Cyrus SASL library. Dovecot provides an alternative that may be worth considering. </p> <h2><a name="intro">How Postfix uses SASL authentication information</a></h2> <p> Postfix SASL support (<a href="http://tools.ietf.org/html/rfc4954">RFC 4954</a>, formerly RFC 2554) can be used to authenticate remote SMTP clients to the Postfix SMTP server, and to authenticate the Postfix SMTP client to a remote SMTP server. </p> <p> When receiving mail, the Postfix SMTP server logs the client-provided username, authentication method, and sender address to the maillog file, and optionally grants mail access via the <a href="postconf.5.html#permit_sasl_authenticated">permit_sasl_authenticated</a> UCE restriction. </p> <p> When sending mail, the Postfix SMTP client can look up the remote SMTP server hostname or destination domain (the address right-hand part) in a SASL password table, and if a username/password is found, it will use that username and password to authenticate to the remote SMTP server. And as of version 2.3, Postfix can be configured to search its SASL password table by the sender email address. </p> <p>This document covers the following topics: </p> <ul> <li><a href="#versions">What SASL implementations are supported</a> <li><a href="#build_dovecot">Building Postfix with Dovecot SASL support</a></li> <li><a href="#build_sasl">Building the Cyrus SASL library</a> <li><a href="#build_postfix">Building Postfix with Cyrus SASL support</a></li> <li><a href="#server_sasl">Enabling SASL authentication in the Postfix SMTP server</a></li> <li><a href="#server_dovecot">Dovecot SASL configuration for the Postfix SMTP server</a></li> <li><a href="#server_cyrus">Cyrus SASL configuration for the Postfix SMTP server</a></li> <li><a href="#server_test">Testing SASL authentication in the Postfix SMTP server</a></li> <li><a href="#debugging">Trouble shooting the SASL internals</a> <li><a href="#client_sasl">Enabling SASL authentication in the Postfix SMTP client</a></li> <li><a href="#client_sasl_sender">Supporting multiple ISP accounts in the Postfix SMTP client</a></li> <li><a href="#credits">Credits</a> </ul> <h2><a name="versions">What SASL implementations are supported</a></h2> <p> This document describes Postfix with the following SASL implementations: </p> <ul> <li> <p> Cyrus SASL version 1 (client and server). </p> <li> <p> Cyrus SASL version 2 (client and server). </p> <li> <p> Dovecot protocol version 1 (server only, Postfix version 2.3 and later) </p> </ul> <p> Postfix version 2.3 introduces a plug-in mechanism that provides support for multiple SASL implementations. To find out what implementations are built into Postfix, use the following commands: </p> <blockquote> <pre> % postconf -a (SASL support in the SMTP server) % postconf -A (SASL support in the SMTP+LMTP client) </pre> </blockquote> <p> Needless to say, these commands are not available in earlier Postfix versions. </p> <h2><a name="build_dovecot">Building Postfix with Dovecot SASL support</a></h2> <p> These instructions assume that you build Postfix from source code as described in the <a href="INSTALL.html">INSTALL</a> document. Some modification may be required if you build Postfix from a vendor-specific source package. </p> <p> Support for the Dovecot version 1 SASL protocol is available in Postfix 2.3 and later. At the time of writing, only server-side SASL support is available, so you can't use it to authenticate to your network provider's server. Dovecot uses its own daemon process for authentication. This keeps the Postfix build process simple, because there is no need to link extra libraries into Postfix. </p> <p> To generate the necessary Makefiles, execute the following in the Postfix top-level directory: </p> <blockquote> <pre> % make makefiles CCARGS='-DUSE_SASL_AUTH -DDEF_SERVER_SASL_TYPE=\"dovecot\"' </pre> </blockquote> <p> After this, proceed with "<tt>make</tt>" as described in the <a href="INSTALL.html">INSTALL</a> document. </p> <p> Notes: </p> <ul> <li> <p> The "-DDEF_SERVER_SASL_TYPE" stuff is not necessary; it just makes Postfix configuration a little more convenient because you don't have to specify the SASL plug-in type in the Postfix <a href="postconf.5.html">main.cf</a> file. </p> <li> <p> If you also want support for LDAP or TLS, you will have to merge their CCARGS and AUXLIBS into the above command line. </p> </ul> <h2><a name="build_sasl">Building the Cyrus SASL library</a></h2> <p> Postfix appears to work with cyrus-sasl-1.5.x or cyrus-sasl-2.1.x, which are available from: </p> <blockquote> <pre> <a href="ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/">ftp://ftp.andrew.cmu.edu/pub/cyrus-mail/</a> </pre> </blockquote> <p> IMPORTANT: if you install the Cyrus SASL libraries as per the default, you will have to symlink /usr/lib/sasl -> /usr/local/lib/sasl for version 1.5.x or /usr/lib/sasl2 -> /usr/local/lib/sasl2 for version 2.1.x. </p> <p> Reportedly, Microsoft Outlook (Express) requires the non-standard LOGIN authentication method. To enable this authentication method, specify ``./configure --enable-login''. </p> <h2><a name="build_postfix">Building Postfix with Cyrus SASL support</a></h2> <p> These instructions assume that you build Postfix from source code as described in the <a href="INSTALL.html">INSTALL</a> document. Some modification may be required if you build Postfix from a vendor-specific source package. </p> <p> The following assumes that the Cyrus SASL include files are in /usr/local/include, and that the Cyrus SASL libraries are in /usr/local/lib. </p> <p> On some systems this generates the necessary Makefile definitions: </p> <dl> <dt> (for Cyrus SASL version 1.5.x): <dd> <pre> % make tidy # if you have left-over files from a previous build % make makefiles CCARGS="-DUSE_SASL_AUTH -DUSE_CYRUS_SASL \ -I/usr/local/include" AUXLIBS="-L/usr/local/lib -lsasl" </pre> <dt> (for Cyrus SASL version 2.1.x): <dd> <pre> % make tidy # if you have left-over files from a previous build % make makefiles CCARGS="-DUSE_SASL_AUTH -DUSE_CYRUS_SASL \ -I/usr/local/include/sasl" AUXLIBS="-L/usr/local/lib -lsasl2" </pre> </dl> <p> On Solaris 2.x you need to specify run-time link information, otherwise ld.so will not find the SASL shared library: </p> <dl> <dt> (for Cyrus SASL version 1.5.x): <dd> <pre> % make tidy # if you have left-over files from a previous build % make makefiles CCARGS="-DUSE_SASL_AUTH -DUSE_CYRUS_SASL \ -I/usr/local/include" AUXLIBS="-L/usr/local/lib \ -R/usr/local/lib -lsasl" </pre> <dt> (for Cyrus SASL version 2.1.x): <dd> <pre> % make tidy # if you have left-over files from a previous build % make makefiles CCARGS="-DUSE_SASL_AUTH -DUSE_CYRUS_SASL \ -I/usr/local/include/sasl" AUXLIBS="-L/usr/local/lib \ -R/usr/local/lib -lsasl2" </pre> </dl> <h2><a name="server_sasl">Enabling SASL authentication in the Postfix SMTP server</a></h2> <p> In order to enable SASL support in the Postfix SMTP server: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtpd_sasl_auth_enable">smtpd_sasl_auth_enable</a> = yes </pre> </blockquote> <p> In order to allow mail relaying by authenticated remote SMTP clients: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtpd_recipient_restrictions">smtpd_recipient_restrictions</a> = <a href="postconf.5.html#permit_mynetworks">permit_mynetworks</a> <a href="postconf.5.html#permit_sasl_authenticated">permit_sasl_authenticated</a> <a href="postconf.5.html#reject_unauth_destination">reject_unauth_destination</a> </pre> </blockquote> <p> To report SASL login names in Received: message headers (Postfix version 2.3 and later): </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtpd_sasl_authenticated_header">smtpd_sasl_authenticated_header</a> = yes </pre> </blockquote> <p> Note: the SASL login names will be shared with the entire world. </p> <p> Older Microsoft SMTP client software implements a non-standard version of the AUTH protocol syntax, and expects that the SMTP server replies to EHLO with "250 AUTH=mechanism-list" instead of "250 AUTH mechanism-list". To accommodate such clients (in addition to conformant clients) use the following: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#broken_sasl_auth_clients">broken_sasl_auth_clients</a> = yes </pre> </blockquote> <h2><a name="server_dovecot">Dovecot SASL configuration for the Postfix SMTP server</a></h2> <p> Dovecot SASL support is available in Postfix 2.3 and later. On the Postfix side you need to specify the location of the Dovecot authentication daemon socket. We use a pathname relative to the Postfix queue directory, so that it will work whether or not the Postfix SMTP server runs chrooted: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtpd_sasl_type">smtpd_sasl_type</a> = dovecot <a href="postconf.5.html#smtpd_sasl_path">smtpd_sasl_path</a> = private/auth </pre> </blockquote> <p> On the Dovecot side you also need to specify the Dovecot authentication daemon socket. In this case we specify an absolute pathname. In the example we assume that the Postfix queue is under /var/spool/postfix/. </p> <blockquote> <pre> /some/where/dovecot.conf: auth default { mechanisms = plain login passdb pam { } userdb passwd { } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } } } </pre> </blockquote> <p> See the Dovecot documentation for how to configure and operate the Dovecot authentication server. </p> <h2><a name="server_cyrus">Cyrus SASL configuration for the Postfix SMTP server</a></h2> <p> You need to configure how the Cyrus SASL library should authenticate a remote SMTP client's username and password. These settings must be stored in a separate configuration file. </p> <p> The name of the configuration file (default: smtpd.conf) will be constructed from a value that the Postfix SMTP server sends to the Cyrus SASL library, which adds the suffix .conf. The value is configured using one of the following variables: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: # Postfix 2.3 and later <a href="postconf.5.html#smtpd_sasl_path">smtpd_sasl_path</a> = smtpd # Postfix < 2.3 smtpd_sasl_application_name = smtpd </pre> </blockquote> <p> Cyrus SASL searches for the configuration file in /usr/local/lib/sasl/ (Cyrus SASL version 1.5.5) or /usr/local/lib/sasl2/ (Cyrus SASL version 2.1.x). </p> <p> Note: some Postfix distributions are modified and look for the smtpd.conf file in /etc/postfix/sasl. </p> <p> Note: some Cyrus SASL distributions look for the smtpd.conf file in /etc/sasl2. </p> <ul> <li> <p> To authenticate against the UNIX password database, use: </p> <dl> <dt> (Cyrus SASL version 1.5.x) <dd> <pre> /usr/local/lib/sasl/smtpd.conf: pwcheck_method: pwcheck </pre> <p> IMPORTANT: pwcheck establishes a UNIX domain socket in /var/pwcheck and waits for authentication requests. The Postfix SMTP server must have read+execute permission to this directory or authentication attempts will fail. </p> <p> The pwcheck daemon is contained in the cyrus-sasl source tarball. </p> <dt> (Cyrus SASL version 1.5.26) <dd> <pre> /usr/local/lib/sasl/smtpd.conf: pwcheck_method: saslauthd </pre> <dt> (Cyrus SASL version 2.1.x) <dd> <pre> /usr/local/lib/sasl2/smtpd.conf: pwcheck_method: saslauthd mech_list: PLAIN LOGIN </pre> </dl> <p> The saslauthd daemon is also contained in the cyrus-sasl source tarball. It is more flexible than the pwcheck daemon, in that it can authenticate against PAM and various other sources. To use PAM, start saslauthd with "-a pam". </p> <p> IMPORTANT: saslauthd usually establishes a UNIX domain socket in /var/run/saslauthd and waits for authentication requests. The Postfix SMTP server must have read+execute permission to this directory or authentication attempts will fail. </p> <p> Note: The directory where saslauthd puts the socket is configurable. See the command-line option "-m /path/to/socket" in the saslauthd --help listing. </p> <li> <p> To authenticate against Cyrus SASL's own password database: </p> <dl> <dt> (Cyrus SASL version 1.5.x) <dd> <pre> /usr/local/lib/sasl/smtpd.conf: pwcheck_method: sasldb </pre> <dt> (Cyrus SASL version 2.1.x) <dd> <pre> /usr/local/lib/sasl2/smtpd.conf: pwcheck_method: auxprop auxprop_plugin: sasldb mech_list: PLAIN LOGIN CRAM-MD5 DIGEST-MD5 </pre> </dl> <p> This will use the Cyrus SASL password file (default: /etc/sasldb in version 1.5.x, or /etc/sasldb2 in version 2.1.x), which is maintained with the saslpasswd or saslpasswd2 command (part of the Cyrus SASL software). On some poorly-supported systems the saslpasswd command needs to be run multiple times before it stops complaining. The Postfix SMTP server needs read access to the sasldb file - you may have to play games with group access permissions. With the OTP authentication mechanism, the Postfix SMTP server also needs WRITE access to /etc/sasldb2 or /etc/sasldb (or the back end SQL database, if used). </p> <p> IMPORTANT: To get sasldb running, make sure that you set the SASL domain (realm) to a fully qualified domain name. </p> <p> EXAMPLE: </p> <dl> <dt> (Cyrus SASL version 1.5.x) <dd> <pre> % saslpasswd -c -u `postconf -h <a href="postconf.5.html#myhostname">myhostname</a>` exampleuser </pre> <dt> (Cyrus SASL version 2.1.x) <dd> <pre> % saslpasswd2 -c -u `postconf -h <a href="postconf.5.html#myhostname">myhostname</a>` exampleuser </pre> </dl> <p> You can find out SASL's idea about the realms of the users in sasldb with <i>sasldblistusers</i> (Cyrus SASL version 1.5.x) or <i>sasldblistusers2</i> (Cyrus SASL version 2.1.x). </p> <p> On the Postfix side, you can have only one realm per <a href="smtpd.8.html">smtpd(8)</a> instance, and only the users belonging to that realm would be able to authenticate. The Postfix variable <a href="postconf.5.html#smtpd_sasl_local_domain">smtpd_sasl_local_domain</a> controls the realm used by <a href="smtpd.8.html">smtpd(8)</a>: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtpd_sasl_local_domain">smtpd_sasl_local_domain</a> = $<a href="postconf.5.html#myhostname">myhostname</a> </pre> </blockquote> </ul> <p> IMPORTANT: The Cyrus SASL password verification services pwcheck and saslauthd can only support the plaintext mechanisms PLAIN or LOGIN. However, the Cyrus SASL library doesn't know this, and will happily advertise other authentication mechanisms that the SASL library implements, such as DIGEST-MD5. As a result, if a remote SMTP client chooses any mechanism other than PLAIN or LOGIN while pwcheck or saslauthd are used, authentication will fail. Thus you may need to limit the list of mechanisms advertised by the Postfix SMTP server. </p> <ul> <li> <p> With older Cyrus SASL versions you remove the corresponding library files from the SASL plug-in directory (and again whenever the system is updated). </p> <li> <p> With Cyrus SASL version 2.1.x or later the mech_list variable can specify a list of authentication mechanisms that Cyrus SASL may offer: </p> <blockquote> <pre> /usr/local/lib/sasl2/smtpd.conf: mech_list: plain login </pre> </blockquote> </ul> <p> For the same reasons you might want to limit the list of plugins used for authentication. </p> <ul> <li> <p> With Cyrus SASL version 1.5.x your only choice is to delete the corresponding library files from the SASL plug-in directory. </p> <li> <p> With SASL version 2.1.x: </p> <blockquote> <pre> /usr/local/lib/sasl2/smtpd.conf: pwcheck_method: auxprop auxprop_plugin: sql </pre> </blockquote> </ul> <p> To run software chrooted with SASL support is an interesting exercise. It probably is not worth the trouble. </p> <h2><a name="server_test">Testing SASL authentication in the Postfix SMTP server</a></h2> <p> To test the server side, connect (for example, with telnet) to the Postfix SMTP server port and you should be able to have a conversation as shown below. Information sent by the client (that is, you) is shown in bold font. </p> <blockquote> <pre> $ <b>telnet server.example.com 25</b> . . . 220 server.example.com ESMTP Postfix <b>EHLO client.example.com</b> 250-server.example.com 250-PIPELINING 250-SIZE 10240000 250-ETRN 250-AUTH DIGEST-MD5 PLAIN CRAM-MD5 250 8BITMIME <b>AUTH PLAIN AHRlc3QAdGVzdHBhc3M=</b> 235 Authentication successful </pre> </blockquote> <p> Instead of AHRlc3QAdGVzdHBhc3M=, specify the base64 encoded form of \0username\0password (the \0 is a null byte). The example above is for a user named `test' with password `testpass'. </p> <p> In order to generate base64 encoded authentication information you can use one of the following commands: </p> <blockquote> <pre> % printf '\0username\0password' | mmencode </pre> </blockquote> <blockquote> <pre> % perl -MMIME::Base64 -e \ 'print encode_base64("\0username\0password");' </pre> </blockquote> <p> The mmencode command is part of the metamail software. MIME::Base64 is available from <a href="http://www.cpan.org/">http://www.cpan.org/</a>. </p> <p> Caution: when posting logs of the SASL negotiations to public lists, please keep in mind that username/password information is trivial to recover from the base64-encoded form. </p> <h2><a name="debugging">Trouble shooting the SASL internals</a></h2> <p> In the Cyrus SASL sources you'll find a subdirectory named "sample". Run make there, then create a symbolic link from sample.conf to smtpd.conf in your Cyrus SASL library directory /usr/local/lib/sasl2. "su" to the user <i>postfix</i> (or whatever your <i><a href="postconf.5.html#mail_owner">mail_owner</a></i> directive is set to): </p> <blockquote> <pre> % su postfix </pre> </blockquote> <p> then run the resulting sample Cyrus SASL server and client in separate terminals. The sample applications send log messages to the syslog facility auth. Check the log to fix the problem or run strace / ktrace / truss on the server to see what makes it unhappy. Repeat the previous step until you can successfully authenticate with the sample Cyrus SASL client. Only then get back to Postfix. </p> <h2><a name="client_sasl">Enabling SASL authentication in the Postfix SMTP client</a></h2> <p> Turn on client-side SASL authentication, and specify a table with per-host or per-destination username and password information. The Postfix SMTP client first searches the table for an entry with the remote SMTP server hostname; if no entry is found, then the Postfix SMTP client searches the table for an entry with the next-hop destination. Usually, that is the right-hand part of an email address, but it can also be the information that is specified with the <a href="postconf.5.html#relayhost">relayhost</a> parameter or with a <a href="transport.5.html">transport(5)</a> table. </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtp_sasl_auth_enable">smtp_sasl_auth_enable</a> = yes <a href="postconf.5.html#smtp_sasl_password_maps">smtp_sasl_password_maps</a> = hash:/etc/postfix/sasl_passwd <a href="postconf.5.html#smtp_sasl_type">smtp_sasl_type</a> = cyrus <a href="postconf.5.html#relayhost">relayhost</a> = [mail.myisp.net] # Alternative form: # <a href="postconf.5.html#relayhost">relayhost</a> = [mail.myisp.net]:submission /etc/postfix/sasl_passwd: [mail.myisp.net] username:password [mail.myisp.net]:submission username:password </pre> </blockquote> <p> Notes: </p> <ul> <li> <p> The "submission" destination port tells Postfix to send mail via TCP network port 587, which is normally reserved for email clients. The default is to send mail to the "smtp" destination port (TCP port 25), which is used for receiving mail across the internet. If you use an explicit destination port in <a href="postconf.5.html">main.cf</a>, then you must use the same form also in the <a href="postconf.5.html#smtp_sasl_password_maps">smtp_sasl_password_maps</a> file. </p> <li> <p> Postfix does not deliver mail via TCP port 465 (the obsolete "wrappermode" protocol). See <a href="TLS_README.html">TLS_README</a> for a solution that uses the "stunnel" command. </p> <li> <p> The "[" and "]" prevent Postfix from looking up the MX (mail exchanger) records for the enclosed name. If you use this form in <a href="postconf.5.html">main.cf</a>, then you must use the same form also in the <a href="postconf.5.html#smtp_sasl_password_maps">smtp_sasl_password_maps</a> file. </p> <li> <p> The Postfix SMTP client opens the SASL client password file before entering the optional chroot jail, so you can keep the file in /etc/postfix and set permissions read / write only for root to keep the username:password combinations away from other system users. </p> <li> <p> Specify <b>dbm</b> instead of <b>hash</b> if your system uses <b>dbm</b> files instead of <b>db</b> files. To find out what lookup tables Postfix supports, use the command "<b>postconf -m</b>". </p> <li> <p> Execute the command "<b>postmap /etc/postfix/sasl_passwd</b>" whenever you change the sasl_passwd table. </p> </ul> <p> Workarounds: </p> <ul> <li> <p> Some remote SMTP servers support PLAIN or LOGIN authentication only. By default, the Postfix SMTP client does not use authentication methods that send plaintext passwords, and defers delivery with the following error message: "Authentication failed: cannot SASL authenticate to server". To enable plaintext authentication specify, for example: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtp_sasl_security_options">smtp_sasl_security_options</a> = noanonymous </pre> </blockquote> <li> <p> Some remote SMTP servers announce authentication mechanisms that don't actually work. It is possible via the <a href="postconf.5.html#smtp_sasl_mechanism_filter">smtp_sasl_mechanism_filter</a> parameter to restrict the list of server mechanisms that the Postfix SMTP client will take into consideration: </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtp_sasl_mechanism_filter">smtp_sasl_mechanism_filter</a> = !gssapi, !external, static:all </pre> </blockquote> <p> In the above example, the Postfix SMTP client will decline to use mechanisms that require special infrastructure such as Kerberos or TLS. </p> <li> <p> The Postfix SMTP client is backwards compatible with SMTP servers that use the non-standard "AUTH=method..." syntax in response to the EHLO command; there is no Postfix client configuration needed to work around it. </p> </ul> <h2><a name="client_sasl_sender">Supporting multiple ISP accounts in the Postfix SMTP client</a></h2> <p> Postfix version 2.3 supports multiple ISP accounts. This can be useful when one person uses the same machine for work and for personal use, or when people with different ISP accounts share the same Postfix server. To make this possible, Postfix 2.3 supports per-sender SASL passwords and per-sender relay hosts. In the example below, Postfix will search the SASL password file by sender before it searches that same file by destination. Likewise, Postfix will search the per-sender <a href="postconf.5.html#relayhost">relayhost</a> file, and use the default <a href="postconf.5.html#relayhost">relayhost</a> only as a final resort. </p> <blockquote> <pre> /etc/postfix/<a href="postconf.5.html">main.cf</a>: <a href="postconf.5.html#smtp_sender_dependent_authentication">smtp_sender_dependent_authentication</a> = yes <a href="postconf.5.html#sender_dependent_relayhost_maps">sender_dependent_relayhost_maps</a> = hash:/etc/postfix/sender_relay <a href="postconf.5.html#smtp_sasl_auth_enable">smtp_sasl_auth_enable</a> = yes <a href="postconf.5.html#smtp_sasl_password_maps">smtp_sasl_password_maps</a> = hash:/etc/postfix/sasl_passwd <a href="postconf.5.html#relayhost">relayhost</a> = [mail.myisp.net] # Alternative form: # <a href="postconf.5.html#relayhost">relayhost</a> = [mail.myisp.net]:submission /etc/postfix/sasl_passwd: # Per-sender authentication; see also /etc/postfix/sender_relay. user1@example.com username2:password2 user2@example.net username2:password2 # Login information for the default <a href="postconf.5.html#relayhost">relayhost</a>. [mail.myisp.net] username:password [mail.myisp.net]:submission username:password /etc/postfix/sender_relay: # Per-sender provider; see also /etc/postfix/sasl_passwd. user1@example.com [mail.example.com]:submission user2@example.net [mail.example.net] </pre> </blockquote> <p> Notes: </p> <ul> <li> <p> If you are creative, then you can try to combine the two tables into one single MySQL database, and configure different Postfix queries to extract the appropriate information. </p> <li> <p> Specify <b>dbm</b> instead of <b>hash</b> if your system uses <b>dbm</b> files instead of <b>db</b> files. To find out what lookup tables Postfix supports, use the command "<b>postconf -m</b>". </p> <li> <p> Execute the command "<b>postmap /etc/postfix/sasl_passwd</b>" whenever you change the sasl_passwd table. </p> <li> <p> Execute the command "<b>postmap /etc/postfix/sender_relay</b>" whenever you change the sender_relay table. </p> </ul> <h2><a name="credits">Credits</a></h2> <ul> <li> Postfix SASL support was originally implemented by Till Franke of SuSE Rhein/Main AG. <li> Wietse trimmed down the code to only the bare necessities. <li> Support for Cyrus SASL version 2 was contributed by Jason Hoos. <li> Liviu Daia added smtpd_sasl_application_name, split <a href="postconf.5.html#reject_sender_login_mismatch">reject_sender_login_mismatch</a> into <a href="postconf.5.html#reject_authenticated_sender_login_mismatch">reject_authenticated_sender_login_mismatch</a> and <a href="postconf.5.html#reject_unauthenticated_sender_login_mismatch">reject_unauthenticated_sender_login_mismatch</a>, and revised the docs. <li> Wietse made another iteration through the code to add plug-in support for multiple SASL implementations, and changed smtpd_sasl_application_name into <a href="postconf.5.html#smtpd_sasl_path">smtpd_sasl_path</a>. <li> The Dovecot SMTP server-only plug-in was originally implemented by Timo Sirainen of Procontrol, Finland. <li> Patrick Ben Koetter revised this document for Postfix 2.4 and made much needed updates. </ul> </body> </html>