<!doctype html public "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/loose.dtd"> <html> <head> <meta http-equiv="Content-Type" content="text/html; charset=us-ascii"> <title> Postfix manual - access(5) </title> </head> <body> <pre> ACCESS(5) ACCESS(5) <b>NAME</b> access - format of Postfix access table <b>SYNOPSIS</b> <b>postmap /etc/postfix/access</b> <b>postmap -q "</b><i>string</i><b>" /etc/postfix/access</b> <b>postmap -q - /etc/postfix/access</b> <<i>inputfile</i> <b>DESCRIPTION</b> The optional <b>access</b> table directs the Postfix SMTP server to selectively reject or accept mail. Access can be allowed or denied for specific host names, domain names, networks, host network addresses or mail addresses. For an example, see the EXAMPLE section at the end of this manual page. Normally, the <b>access</b> table is specified as a text file that serves as input to the <a href="postmap.1.html"><b>postmap</b>(1)</a> command. The result, an indexed file in <b>dbm</b> or <b>db</b> format, is used for fast searching by the mail system. Execute the command <b>postmap /etc/postfix/access</b> in order to rebuild the indexed file after changing the access table. When the table is provided via other means such as NIS, LDAP or SQL, the same lookups are done as for ordinary indexed files. Alternatively, the table can be provided as a regular- expression map where patterns are given as regular expres- sions, or lookups can be directed to TCP-based server. In that case, the lookups are done in a slightly different way as described below under "REGULAR EXPRESSION TABLES" and "TCP-BASED TABLES". <b>TABLE FORMAT</b> The input format for the <a href="postmap.1.html"><b>postmap</b>(1)</a> command is as follows: <i>pattern action</i> When <i>pattern</i> matches a mail address, domain or host address, perform the corresponding <i>action</i>. blank lines and comments Empty lines and whitespace-only lines are ignored, as are lines whose first non-whitespace character is a `#'. multi-line text A logical line starts with non-whitespace text. A line that starts with whitespace continues a logi- cal line. <b>EMAIL ADDRESS PATTERNS</b> With lookups from indexed files such as DB or DBM, or from networked tables such as NIS, LDAP or SQL, patterns are tried in the order as listed below: <i>user</i>@<i>domain</i> Matches the specified mail address. <i>domain.tld</i> Matches <i>domain.tld</i> as the domain part of an email address. The pattern <i>domain.tld</i> also matches subdomains, but only when the string <b>smtpd_access_maps</b> is listed in the Postfix <b><a href="postconf.5.html#parent_domain_matches_subdomains">parent_domain_matches_subdomains</a></b> con- figuration setting (note that this is the default for some versions of Postfix). Otherwise, specify <i>.domain.tld</i> (note the initial dot) in order to match subdomains. <i>user</i>@ Matches all mail addresses with the specified user part. Note: lookup of the null sender address is not possible with some types of lookup table. By default, Postfix uses <> as the lookup key for such addresses. The value is specified with the <b><a href="postconf.5.html#smtpd_null_access_lookup_key">smtpd_null_access_lookup_key</a></b> parameter in the Postfix <b>main.cf</b> file. <b>EMAIL ADDRESS EXTENSION</b> When a mail address localpart contains the optional recip- ient delimiter (e.g., <i>user+foo</i>@<i>domain</i>), the lookup order becomes: <i>user+foo</i>@<i>domain</i>, <i>user</i>@<i>domain</i>, <i>domain</i>, <i>user+foo</i>@, and <i>user</i>@. <b>HOST NAME/ADDRESS PATTERNS</b> With lookups from indexed files such as DB or DBM, or from networked tables such as NIS, LDAP or SQL, the following lookup patterns are examined in the order as listed: <i>domain.tld</i> Matches <i>domain.tld</i>. The pattern <i>domain.tld</i> also matches subdomains, but only when the string <b>smtpd_access_maps</b> is listed in the Postfix <b><a href="postconf.5.html#parent_domain_matches_subdomains">parent_domain_matches_subdomains</a></b> con- figuration setting. Otherwise, specify <i>.domain.tld</i> (note the initial dot) in order to match subdo- mains. <i>net.work.addr.ess</i> <i>net.work.addr</i> <i>net.work</i> <i>net</i> Matches any host address in the specified network. A network address is a sequence of one or more octets separated by ".". NOTE: use the <b>cidr</b> lookup table type to specify network/netmask patterns. See <a href="cidr_table.5.html">cidr_table(5)</a> for details. <b>ACCEPT ACTIONS</b> <b>OK</b> Accept the address etc. that matches the pattern. <i>all-numerical</i> An all-numerical result is treated as OK. This for- mat is generated by address-based relay authoriza- tion schemes. <b>REJECT ACTIONS</b> <b>4</b><i>NN text</i> <b>5</b><i>NN text</i> Reject the address etc. that matches the pattern, and respond with the numerical three-digit code and text. <b>4</b><i>NN</i> means "try again later", while <b>5</b><i>NN</i> means "do not try again". <b>REJECT</b> <i>optional text...</i> Reject the address etc. that matches the pattern. Reply with <i>$reject</i><b>_</b><i>code optional text...</i> when the optional text is specified, otherwise reply with a generic error response message. <b>DEFER_IF_REJECT</b> <i>optional text...</i> Defer the request if some later restriction would result in a REJECT action. Reply with "<b>450</b> <i>optional</i> <i>text...</i> when the optional text is specified, other- wise reply with a generic error response message. This feature is available in Postfix 2.1 and later. <b>DEFER_IF_PERMIT</b> <i>optional text...</i> Defer the request if some later restriction would result in a an explicit or implicit PERMIT action. Reply with "<b>450</b> <i>optional text...</i> when the optional text is specified, otherwise reply with a generic error response message. This feature is available in Postfix 2.1 and later. <b>OTHER ACTIONS</b> <i>restriction...</i> Apply the named UCE restriction(s) (<b>permit</b>, <b>reject</b>, <b><a href="postconf.5.html#reject_unauth_destination">reject_unauth_destination</a></b>, and so on). <b>DISCARD</b> <i>optional text...</i> Claim successful delivery and silently discard the message. Log the optional text if specified, oth- erwise log a generic message. Note: this action currently affects all recipients of the message. This feature is available in Postfix 2.0 and later. <b>DUNNO</b> Pretend that the lookup key was not found. This prevents Postfix from trying substrings of the lookup key (such as a subdomain name, or a network address subnetwork). This feature is available in Postfix 2.0 and later. <b>FILTER</b> <i>transport:destination</i> After the message is queued, send the entire mes- sage through the specified external content filter. The <i>transport:destination</i> syntax is described in the <a href="transport.5.html">transport(5)</a> manual page. More information about external content filters is in the Postfix <a href="FILTER_README.html">FILTER_README</a> file. Note: this action overrides the <b>main.cf <a href="postconf.5.html#content_filter">con</a>-</b> <b><a href="postconf.5.html#content_filter">tent_filter</a></b> setting, and currently affects all recipients of the message. This feature is available in Postfix 2.0 and later. <b>HOLD</b> <i>optional text...</i> Place the message on the <b>hold</b> queue, where it will sit until someone either deletes it or releases it for delivery. Log the optional text if specified, otherwise log a generic message. Mail that is placed on hold can be examined with the <a href="postcat.1.html"><b>postcat</b>(1)</a> command, and can be destroyed or released with the <a href="postsuper.1.html"><b>postsuper</b>(1)</a> command. Note: this action currently affects all recipients of the message. This feature is available in Postfix 2.0 and later. <b>PREPEND</b> <i>headername: headervalue</i> Prepend the specified message header to the mes- sage. When this action is used multiple times, the first prepended header appears before the second etc. prepended header. Note: this action does not support multi-line mes- sage headers. This feature is available in Postfix 2.1 and later. <b>REDIRECT</b> <i>user@domain</i> After the message is queued, send the message to the specified address instead of the intended recipient(s). Note: this action overrides the FILTER action, and currently affects all recipients of the message. This feature is available in Postfix 2.1 and later. <b>WARN</b> <i>optional text...</i> Log a warning with the optional text, together with client information and if available, with helo, sender, recipient and protocol information. This feature is available in Postfix 2.1 and later. <b>REGULAR EXPRESSION TABLES</b> This section describes how the table lookups change when the table is given in the form of regular expressions. For a description of regular expression lookup table syntax, see <a href="regexp_table.5.html"><b>regexp_table</b>(5)</a> or <a href="pcre_table.5.html"><b>pcre_table</b>(5)</a>. Each pattern is a regular expression that is applied to the entire string being looked up. Depending on the appli- cation, that string is an entire client hostname, an entire client IP address, or an entire mail address. Thus, no parent domain or parent network search is done, <i>user@domain</i> mail addresses are not broken up into their <i>user@</i> and <i>domain</i> constituent parts, nor is <i>user+foo</i> broken up into <i>user</i> and <i>foo</i>. Patterns are applied in the order as specified in the table, until a pattern is found that matches the search string. Actions are the same as with indexed file lookups, with the additional feature that parenthesized substrings from the pattern can be interpolated as <b>$1</b>, <b>$2</b> and so on. <b>TCP-BASED TABLES</b> This section describes how the table lookups change when lookups are directed to a TCP-based server. For a descrip- tion of the TCP client/server lookup protocol, see <b>tcp_table</b>(5). This feature is not available in Postfix version 2.1. Each lookup operation uses the entire query string once. Depending on the application, that string is an entire client hostname, an entire client IP address, or an entire mail address. Thus, no parent domain or parent network search is done, <i>user@domain</i> mail addresses are not broken up into their <i>user@</i> and <i>domain</i> constituent parts, nor is <i>user+foo</i> broken up into <i>user</i> and <i>foo</i>. Actions are the same as with indexed file lookups. <b>EXAMPLE</b> The following example uses an indexed file, so that the order of table entries does not matter. The example per- mits access by the client at address 1.2.3.4 but rejects all other clients in 1.2.3.0/24. Instead of "<b>hash</b>" lookup tables, some systems use "<b>dbm</b>". Use the command "<b>postconf</b> <b>-m</b>" to find out what lookup tables Postfix supports on your system. /etc/postfix/main.cf: <a href="postconf.5.html#smtpd_client_restrictions">smtpd_client_restrictions</a> = <a href="postconf.5.html#check_client_access">check_client_access</a> hash:/etc/postfix/access /etc/postfix/access: 1.2.3 REJECT 1.2.3.4 OK Execute the command "<b>postmap /etc/postfix/access</b>" after editing the file. <b>BUGS</b> The table format does not understand quoting conventions. <b>SEE ALSO</b> <a href="postmap.1.html">postmap(1)</a>, Postfix lookup table manager <a href="smtpd.8.html">smtpd(8)</a>, SMTP server <a href="postconf.5.html">postconf(5)</a>, configuration parameters <a href="transport.5.html">transport(5)</a>, transport:nexthop syntax <b>README FILES</b> <a href="SMTPD_ACCESS_README.html">SMTPD_ACCESS_README</a>, built-in SMTP server access control <a href="DATABASE_README.html">DATABASE_README</a>, Postfix lookup table overview <b>LICENSE</b> The Secure Mailer license must be distributed with this software. <b>AUTHOR(S)</b> Wietse Venema IBM T.J. Watson Research P.O. Box 704 Yorktown Heights, NY 10598, USA ACCESS(5) </pre> </body> </html>