Makefile.in   [plain text]


# Makefile.in generated automatically by automake 1.4 from Makefile.am

# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Top-level Makefile.am for SASL
# Rob Earhart
#
################################################################
# Copyright (c) 2000 Carnegie Mellon University.  All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer. 
#
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in
#    the documentation and/or other materials provided with the
#    distribution.
#
# 3. The name "Carnegie Mellon University" must not be used to
#    endorse or promote products derived from this software without
#    prior written permission. For permission or any other legal
#    details, please contact  
#      Office of Technology Transfer
#      Carnegie Mellon University
#      5000 Forbes Avenue
#      Pittsburgh, PA  15213-3890
#      (412) 268-4387, fax: (412) 268-7395
#      tech-transfer@andrew.cmu.edu
#
# 4. Redistributions of any form whatsoever must retain the following
#    acknowledgment:
#    "This product includes software developed by Computing Services
#     at Carnegie Mellon University (http://www.cmu.edu/computing/)."
#
# CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES WITH REGARD TO
# THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
# AND FITNESS, IN NO EVENT SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE
# FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
# WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN
# AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
# OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
#
################################################################


SHELL = @SHELL@

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
prefix = @prefix@
exec_prefix = @exec_prefix@

bindir = @bindir@
sbindir = @sbindir@
libexecdir = @libexecdir@
datadir = @datadir@
sysconfdir = @sysconfdir@
sharedstatedir = @sharedstatedir@
localstatedir = @localstatedir@
libdir = @libdir@
infodir = @infodir@
mandir = @mandir@
includedir = @includedir@
oldincludedir = /usr/include

DESTDIR =

pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@

top_builddir = .

ACLOCAL = @ACLOCAL@
AUTOCONF = @AUTOCONF@
AUTOMAKE = @AUTOMAKE@
AUTOHEADER = @AUTOHEADER@

INSTALL = @INSTALL@
INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
INSTALL_DATA = @INSTALL_DATA@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
transform = @program_transform_name@

NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
host_alias = @host_alias@
host_triplet = @host@
AFS_CLIENT_LIBS = @AFS_CLIENT_LIBS@
AFS_CLIENT_LIBS_STATIC = @AFS_CLIENT_LIBS_STATIC@
AFS_INC_FLAGS = @AFS_INC_FLAGS@
AFS_KTC_LIBS = @AFS_KTC_LIBS@
AFS_KTC_LIBS_STATIC = @AFS_KTC_LIBS_STATIC@
AFS_LIBAUDIT = @AFS_LIBAUDIT@
AFS_LIBDES = @AFS_LIBDES@
AFS_LIBDESA = @AFS_LIBDESA@
AFS_LIB_FLAGS = @AFS_LIB_FLAGS@
AFS_RX_LIBS = @AFS_RX_LIBS@
AFS_TOP_DIR = @AFS_TOP_DIR@
AS = @AS@
AWK = @AWK@
CC = @CC@
CPP = @CPP@
DB_INC_FLAGS = @DB_INC_FLAGS@
DB_LIB_FLAGS = @DB_LIB_FLAGS@
DIRS = @DIRS@
DLLTOOL = @DLLTOOL@
DMALLOC_LIBS = @DMALLOC_LIBS@
DYNSASLFLAGS = @DYNSASLFLAGS@
GETADDRINFOOBJS = @GETADDRINFOOBJS@
GETNAMEINFOOBJS = @GETNAMEINFOOBJS@
GETSUBOPT = @GETSUBOPT@
GSSAPIBASE_LIBS = @GSSAPIBASE_LIBS@
GSSAPI_LIBS = @GSSAPI_LIBS@
IPCTYPE = @IPCTYPE@
JAVAC = @JAVAC@
JAVADOC = @JAVADOC@
JAVAH = @JAVAH@
JAVAROOT = @JAVAROOT@
JAVA_INCLUDES = @JAVA_INCLUDES@
KRB_INC_FLAGS = @KRB_INC_FLAGS@
KRB_LIB_FLAGS = @KRB_LIB_FLAGS@
LIBOBJS = @LIBOBJS@
LIBSSL_INC_DIR = @LIBSSL_INC_DIR@
LIBSSL_INC_FLAGS = @LIBSSL_INC_FLAGS@
LIBSSL_LIB_DIR = @LIBSSL_LIB_DIR@
LIBSSL_LIB_FLAGS = @LIBSSL_LIB_FLAGS@
LIBTOOL = @LIBTOOL@
LIB_CRYPT = @LIB_CRYPT@
LIB_DES = @LIB_DES@
LIB_DYN_SASL = @LIB_DYN_SASL@
LIB_MYSQL = @LIB_MYSQL@
LIB_PAM = @LIB_PAM@
LIB_SASL = @LIB_SASL@
LIB_SOCKET = @LIB_SOCKET@
LN_S = @LN_S@
LTGETADDRINFOOBJS = @LTGETADDRINFOOBJS@
LTGETNAMEINFOOBJS = @LTGETNAMEINFOOBJS@
LTLIBOBJS = @LTLIBOBJS@
LTSNPRINTFOBJS = @LTSNPRINTFOBJS@
MAKEINFO = @MAKEINFO@
NM = @NM@
NTLM_LIBS = @NTLM_LIBS@
OBJDUMP = @OBJDUMP@
OTP_LIBS = @OTP_LIBS@
PACKAGE = @PACKAGE@
PLAIN_LIBS = @PLAIN_LIBS@
PURECOV = @PURECOV@
PURIFY = @PURIFY@
PWCHECKMETH = @PWCHECKMETH@
RANLIB = @RANLIB@
RPATH = @RPATH@
SASLFLAGS = @SASLFLAGS@
SASL_DB_BACKEND = @SASL_DB_BACKEND@
SASL_DB_BACKEND_STATIC = @SASL_DB_BACKEND_STATIC@
SASL_DB_INC = @SASL_DB_INC@
SASL_DB_LIB = @SASL_DB_LIB@
SASL_DB_MANS = @SASL_DB_MANS@
SASL_DB_UTILS = @SASL_DB_UTILS@
SASL_DL_LIB = @SASL_DL_LIB@
SASL_KRB_LIB = @SASL_KRB_LIB@
SASL_MECHS = @SASL_MECHS@
SASL_STATIC_LIBS = @SASL_STATIC_LIBS@
SASL_STATIC_OBJS = @SASL_STATIC_OBJS@
SASL_UTIL_HEADERS_EXTRA = @SASL_UTIL_HEADERS_EXTRA@
SASL_UTIL_LIBS_EXTRA = @SASL_UTIL_LIBS_EXTRA@
SFIO_INC_FLAGS = @SFIO_INC_FLAGS@
SFIO_LIB_FLAGS = @SFIO_LIB_FLAGS@
SMTPTEST_PROGRAM = @SMTPTEST_PROGRAM@
SNPRINTFOBJS = @SNPRINTFOBJS@
SRP_LIBS = @SRP_LIBS@
VERSION = @VERSION@
plugindir = @plugindir@
@SASLAUTHD_TRUE@SAD = saslauthd
@SASLAUTHD_FALSE@SAD = 
@PWCHECK_TRUE@PWC = pwcheck
@PWCHECK_FALSE@PWC = 
@SAMPLE_TRUE@SAM = sample
@SAMPLE_FALSE@SAM = 
@JAVA_TRUE@JAV = java
@JAVA_FALSE@JAV = 
@MACOSX_TRUE@INSTALLOSX = install-exec-local-osx
@MACOSX_FALSE@INSTALLOSX = 

SUBDIRS = include sasldb plugins lib utils doc man $(PWC) $(SAM) $(JAV) $(SAD)
EXTRA_DIST = config cmulocal win32 mac dlcompat-20010505

framedir = /Library/Frameworks/SASL2.framework
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES = 
DIST_COMMON =  README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \
Makefile.am Makefile.in NEWS acconfig.h acinclude.m4 aclocal.m4 \
config.h.in configure configure.in


DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)

TAR = gtar
GZIP_ENV = --best
DIST_SUBDIRS =  include sasldb plugins lib utils doc man pwcheck sample \
java saslauthd
all: all-redirect
.SUFFIXES:
$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) 
	cd $(top_srcdir) && $(AUTOMAKE) --gnu --include-deps Makefile

Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status

$(ACLOCAL_M4):  configure.in  acinclude.m4
	cd $(srcdir) && $(ACLOCAL)

config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck
$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
	cd $(srcdir) && $(AUTOCONF)

config.h: stamp-h
	@if test ! -f $@; then \
		rm -f stamp-h; \
		$(MAKE) stamp-h; \
	else :; fi
stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status
	cd $(top_builddir) \
	  && CONFIG_FILES= CONFIG_HEADERS=config.h \
	     $(SHELL) ./config.status
	@echo timestamp > stamp-h 2> /dev/null
$(srcdir)/config.h.in: $(srcdir)/stamp-h.in
	@if test ! -f $@; then \
		rm -f $(srcdir)/stamp-h.in; \
		$(MAKE) $(srcdir)/stamp-h.in; \
	else :; fi
$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h
	cd $(top_srcdir) && $(AUTOHEADER)
	@echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null

mostlyclean-hdr:

clean-hdr:

distclean-hdr:
	-rm -f config.h

maintainer-clean-hdr:

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.

@SET_MAKE@

all-recursive install-data-recursive install-exec-recursive \
installdirs-recursive install-recursive uninstall-recursive  \
check-recursive installcheck-recursive info-recursive dvi-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@set fnord $(MAKEFLAGS); amf=$$2; \
	dot_seen=no; \
	rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
	  rev="$$subdir $$rev"; \
	  test "$$subdir" = "." && dot_seen=yes; \
	done; \
	test "$$dot_seen" = "no" && rev=". $$rev"; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	   || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done

tags: TAGS

ID: $(HEADERS) $(SOURCES) $(LISP)
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	here=`pwd` && cd $(srcdir) \
	  && mkid -f$$here/ID $$unique $(LISP)

TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
   if test "$$subdir" = .; then :; else \
	    test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
   fi; \
	done; \
	list='$(SOURCES) $(HEADERS)'; \
	unique=`for i in $$list; do echo $$i; done | \
	  awk '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \
	  || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP) -o $$here/TAGS)

mostlyclean-tags:

clean-tags:

distclean-tags:
	-rm -f TAGS ID

maintainer-clean-tags:

distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	-rm -rf $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
	mkdir $(distdir)/=build
	mkdir $(distdir)/=inst
	dc_install_base=`cd $(distdir)/=inst && pwd`; \
	cd $(distdir)/=build \
	  && ../configure --srcdir=.. --prefix=$$dc_install_base \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) dist
	-rm -rf $(distdir)
	@banner="$(distdir).tar.gz is ready for distribution"; \
	dashes=`echo "$$banner" | sed s/./=/g`; \
	echo "$$dashes"; \
	echo "$$banner"; \
	echo "$$dashes"
dist: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
dist-all: distdir
	-chmod -R a+r $(distdir)
	GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
	-rm -rf $(distdir)
distdir: $(DISTFILES)
	-rm -rf $(distdir)
	mkdir $(distdir)
	-chmod 777 $(distdir)
	@for file in $(DISTFILES); do \
	  d=$(srcdir); \
	  if test -d $$d/$$file; then \
	    cp -pr $$d/$$file $(distdir)/$$file; \
	  else \
	    test -f $(distdir)/$$file \
	    || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
	    || cp -p $$d/$$file $(distdir)/$$file || :; \
	  fi; \
	done
	for subdir in $(DIST_SUBDIRS); do \
	  if test "$$subdir" = .; then :; else \
	    test -d $(distdir)/$$subdir \
	    || mkdir $(distdir)/$$subdir \
	    || exit 1; \
	    chmod 777 $(distdir)/$$subdir; \
	    (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
	      || exit 1; \
	  fi; \
	done
	$(MAKE) $(AM_MAKEFLAGS) top_distdir="$(top_distdir)" distdir="$(distdir)" dist-hook
info-am:
info: info-recursive
dvi-am:
dvi: dvi-recursive
check-am: all-am
check: check-recursive
installcheck-am:
installcheck: installcheck-recursive
all-recursive-am: config.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

install-exec-am: install-exec-local
install-exec: install-exec-recursive

install-data-am:
install-data: install-data-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
install: install-recursive
uninstall-am:
uninstall: uninstall-recursive
all-am: Makefile config.h
all-redirect: all-recursive-am
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
installdirs: installdirs-recursive
installdirs-am:


mostlyclean-generic:

clean-generic:

distclean-generic:
	-rm -f Makefile $(CONFIG_CLEAN_FILES)
	-rm -f config.cache config.log stamp-h stamp-h[0-9]*

maintainer-clean-generic:
mostlyclean-am:  mostlyclean-hdr mostlyclean-tags mostlyclean-generic

mostlyclean: mostlyclean-recursive

clean-am:  clean-hdr clean-tags clean-generic mostlyclean-am

clean: clean-recursive

distclean-am:  distclean-hdr distclean-tags distclean-generic clean-am
	-rm -f libtool

distclean: distclean-recursive
	-rm -f config.status

maintainer-clean-am:  maintainer-clean-hdr maintainer-clean-tags \
		maintainer-clean-generic distclean-am
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."

maintainer-clean: maintainer-clean-recursive
	-rm -f config.status

.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \
install-data-recursive uninstall-data-recursive install-exec-recursive \
uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
all-recursive check-recursive installcheck-recursive info-recursive \
dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
distclean-tags clean-tags maintainer-clean-tags distdir info-am info \
dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \
install-exec-local install-exec-am install-exec install-data-am \
install-data install-am install uninstall-am uninstall all-redirect \
all-am all installdirs-am installdirs mostlyclean-generic \
distclean-generic clean-generic maintainer-clean-generic clean \
mostlyclean distclean maintainer-clean


dist-hook:
	@find $(distdir) -name CVS -print | xargs -t rm -rf
install-exec-local: $(INSTALLOSX)
	@if test "$(plugindir)" != "$(prefix)/lib/sasl2"; then \
	  echo "********************************************************"; \
	  echo "* WARNING:"; \
	  echo "* Plugins are being installed into $(prefix)/lib/sasl2,"; \
	  echo "* but the library will look for them in $(plugindir)."; \
	  echo "* You need to make sure that the plugins will eventually"; \
	  echo "* be in $(plugindir) -- the easiest way is to make a"; \
	  echo "* symbolic link from $(plugindir) to $(prefix)/lib/sasl2,"; \
	  echo "* but this may not be appropriate for your site, so this"; \
	  echo "* installation procedure won't do it for you."; \
	  echo "*"; \
          echo "* If you don't want to do this for some reason, you can"; \
          echo "* set the location where the library will look for plugins"; \
	  echo "* by setting the environment variable SASL_PATH to the path"; \
	  echo "* the library should use."; \
	  echo "********************************************************"; \
	fi
install-exec-local-osx:
	$(mkinstalldirs) $(framedir)/Versions/A/Headers
	$(mkinstalldirs) $(framedir)/Versions/A/Resources
	cd $(framedir)/Versions ; ln -fs A Current
	cd $(framedir) ; ln -fs Versions/A/Headers .
	cd $(framedir) ; ln -fs Versions/A/Resources .
	$(INSTALL_DATA) $(srcdir)/config/Info.plist $(framedir)/Versions/A/Resources

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: