gnutar.1   [plain text]

.\" Copyright (c) 1991, 1992, 1993 Free Software Foundation	-*- nroff -*-
.\" See /usr/src/gnu/COPYING for conditions of redistribution
.\"	Written by John F. Woods <>
.\"	Updated by Robert Eckardt <>
.\" $FreeBSD: src/gnu/usr.bin/tar/tar.1,v 1.40 2001/07/10 10:42:19 ru Exp $
.Dd December 23, 2000
.Dt TAR 1
.Nm gnutar
.Nd "tape archiver; manipulate ""tar"" archive files"
.Op Oo Fl Oc Ns Ar bundled-options Ar Args
.Op Ar gnu-style-flags
.Op Ar filenames | Fl C Ar directory-name
.Ar ...
.Nm Tar
is short for 
.Dq tape archiver ,
so named for historical reasons; the
program creates, adds files to, or extracts files from an archive file
format, called a
.Ar tarfile .
.Ar tarfile
is often a magnetic tape, but can be a floppy diskette or any
regular disk file.
The first argument word of the
command line is usually a command word of bundled function and modifier
letters, optionally preceded by a dash;
it must contain exactly one function letter from the set
.Cm A ,
.Cm c ,
.Cm d ,
.Cm r ,
.Cm t ,
.Cm u ,
.Cm x ,
.Em append ,
.Em create ,
.Em difference ,
.Em replace ,
.Em table of contents ,
.Em update ,
.Em extract
(further described below).
The command word can also contain other function modifiers described below,
some of which will take arguments from the command line in the order they
are specified in the command word (review the
Functions and function modifiers can also be specified
with the GNU argument convention (preceded by two dashes, one function or
modifier per word.
Command-line arguments that specify files to
add to, extract from, or list from an archive may be given as shell
pattern matching strings.
Exactly one of the following functions must be specified.
.Bl -tag -width "--concatenate" -compact
.It Fl A
.It Fl -catenate
.It Fl "-concatenate"
Append the contents of named file, which must itself be a
to the end of the archive (erasing the old end-of-archive block).
This has the effect of adding the files contained in the named file to
the first archive, rather than adding the second archive as an element
of the first.
.Em Note :
This option requires a rewritable
.Ar tarfile ,
and therefore does not work on quarter-inch cartridge tapes.
.It Fl c
.It Fl -create
Create a new archive (or truncates an old one) and writes the named files
to it.
.It Fl d
.It Fl -diff
.It Fl -compare
Find differences between files in the archive and corresponding files in
the file system.
.It Fl -delete
Delete named files from the archive.
(Does not work on quarter-inch tapes).
.It Fl r
.It Fl -append
Append files to the end of an archive.
(Does not work on quarter-inch tapes).
.It Fl t
.It Fl -list
List the contents of an archive; if
.Ar filename
arguments are given, only those
files are listed, otherwise the entire table of contents is listed.
.It Fl u
.It Fl -update
Append the named files if the on-disk version has a modification date
more recent than their copy in the archive (if any).
Does not work on quarter-inch tapes.
.It Fl x
.It Fl -extract
.It Fl -get
Extract files from an archive.
The owner, modification time, and file permissions are restored, if possible.
If no
.Ar file
arguments are given, extract all the files in the archive.
If a
.Ar filename
argument matches the name of a directory on the tape, that directory and
its contents are extracted (as well as all directories under that directory).
If the archive contains multiple entries corresponding to the same file
(see the
.Fl -append
command above), the last one extracted will overwrite all earlier versions.
The other options to
may be combined arbitrarily; single-letter options may be bundled in with
the command word.
Verbose options which take arguments will be
followed by the argument; single-letter options will consume
successive command line arguments (see the
will properly handle option arguments passed either with or without a leading `=` (i.e. either --option=arg or --option arg).
.Bl -tag -width "--preserve-permissions" -compact
.It Fl -help
Prints a message listing and briefly describing all the command
options to
.Nm .
.It Fl -atime-preserve
Restore the access times on files which are written to tape (note that
this will change the inode-change time!).
.It Fl b
.It Fl -block-size Ar number
.It Fl -blocking-factor Ar number
.It Fl -record-size Ar size
Sets the block size for reading or writing to
.Ar number
* 512-byte blocks.
Or sets block size for reading or writing to
.Ar size
bytes which must be a multiple of 512.
.It Fl B
.It Fl -read-full-records
Re-assemble short reads into full records (for reading
.Bx 4.2
.It Fl -backup Ar control
Backup files before removal.  Optionally, the user can specify a 
.Ar control
argument to control how
performs the backups.
Supported values are listed bellow in the
.It Fl -suffix Ar suffix
Backup files before removal.
Override the normal backup suffix (default: '~'), using 
.Ar suffix
.It Fl C Ar directory
.It Fl -directory Ar directory
Change to
.Ar directory
before processing the remaining arguments.
.It Fl -checkpoint
Print number of buffer reads/writes while reading/writing the archive.
.It Fl f Xo
.Oo Ar hostname : Oc Ns Ar file
.It Fl -file Xo
.Oo Ar hostname : Oc Ns Ar file
Read or write the specified
.Ar file
(default is
.Pa /dev/sa0 ) .
If a
.Ar hostname
is specified,
will use
.Xr rmt 8
to read or write the specified
.Ar file
on a remote machine.
.Dq Ar -
may be used as a filename, for reading
or writing to/from stdin/stdout.
.It Fl -force-local
Archive file is local even if it has a colon.
.It Fl F Ar file
.It Fl -info-script Ar file
.It Fl -new-volume-script Ar file
Run a script at the end of each archive volume (implies
.Fl M ) .
.It Fl G
.It Fl -incremental
Create/list/extract old GNU-format incremental backup.
.It Fl g Ar file
.It Fl -listed-incremental Ar file
Create/list/extract new GNU-format incremental backup.
.It Fl -group Ar name
.Ar group
as group for added files.
.It Fl h
.It Fl -dereference
Don't write symlinks as symlinks; write the data of the files they name.
.It Fl i
.It Fl -ignore-zeros
Ignore blocks of zeroes in archive (usually means End-Of-File).
.It Fl -ignore-failed-read
Don't exit with non-zero status on unreadable files.
.It Fl j
.It Fl -bzip2
Filter the archive through
.Xr bzip2 1 .
.It Fl k
.It Fl -keep-old-files
Keep files which already exist on disk; don't overwrite them from the archive.
.It Fl K Ar file
.It Fl -starting-file Ar file
Begin at
.Ar file
in the archive.
.It Fl l
.It Fl -one-file-system
Stay in local file system when creating an archive (do not cross mount
.It Fl L Ar number
.It Fl -tape-length Ar number
Change tapes after writing 
.Ar number
* 1024 bytes.
.It Fl -mode Ar changes
.Ar changes
to file mode of added files.
.It Fl m
.It Fl -modification-time
Don't extract file modified time.
.It Fl M
.It Fl -multi-volume
Create/list/extract multi-volume archive.
.It Fl -no-recursion
Don't recurse into subdirectories when creating.
.It Fl -volno-file Ar file
File name with volume number to start with.
.It Fl N Ar date
.It Fl -after-date Ar date
.It Fl -newer Ar date
Only store files with creation time newer than
.Ar date .
.It Fl -newer-mtime Ar date
Only store files with modification time newer than
.Ar date .
.It Fl -no-same-owner
Do not preserve ownership when extracting files.  Extract them all as owned by the current user.
.It Fl -no-same-permissions
Do not extract permission information.  Extract them using the default permissions for the current user.
.It Fl -numeric-owner
Use numbers instead of names for owner/group names.
.It Fl o
.It Fl -old-archive
.It Fl -portability
Write a V7 format archive, rather than POSIX format.
.It Fl O
.It Fl -to-stdout
Extract files to standard output.
.It Fl -owner Ar name
.Ar name
as owner for added files.
.It Fl -overwrite
Overwrite existing files when extracting.
.It Fl -overwrite-dir
Overwrite directory metadata when extracting.
.It Fl p
.It Fl -same-permissions
.It Fl -preserve-permissions
Extract all permission information.
.It Fl -preserve
Has the effect of
.Fl p s .
.It Fl P
.It Fl -absolute-names
Don't strip leading
.Ql /
from file names.
.It Fl -posix
to create a POSIX compliant `tar' archive.
.It Fl R
.It Fl -block-number
Show record number within archive with each message.
.It Fl -remove-files
Remove files after adding them to the archive.
.It Fl -rsh-command Ar command
.Ar command
instead of rsh for remote archives/files.
.It Fl s
.It Fl -same-order
.It Fl -preserve-order
List of names to extract is sorted to match archive.
.It Fl -same-owner
Try to preserve ownership when extracting files.
.It Fl -show-omitted-dirs
Show directories which were omitted while processing the archive.
.It Fl S
.It Fl -sparse
.Dq sparse
files efficiently.
.It Fl T Ar file
.It Fl -files-from Ar file
Get names of files to extract or create from
.Ar file ,
one per line.
.It Fl -null
Modifies behavior of
.Fl T
to expect null-terminated names; disables
.Fl C .
.It Fl -totals
Prints total bytes written with
.Fl -create .
.It Fl U
.It Fl -unlink-first
Unlink files before creating them.
.It Fl -recursive-unlink
Empty hierarchies prior to extracting directory.
.It Fl v
.It Fl -verbose
Lists files written to archive with
.Fl -create
or extracted with
.Fl -extract ;
lists file protection information along with file names with
.Fl -list .
.It Fl V Ar volume-name
.It Fl -label Ar volume-name
Create archive with the given
.Ar volume-name .
When used with list or extract, 
.Ar volume-name
is used as a globing pattern.
.It Fl -version
program version number.
.It Fl w
.It Fl -interactive
.It Fl -confirmation
Ask for confirmation for every action.
.It Fl W
.It Fl -verify
Attempt to verify the archive after writing it.
.It Fl -exclude Ar pattern
Exclude files matching the
.Ar pattern
(don't extract them, don't add them, don't list them).
.It Fl X Ar file
.It Fl -exclude-from Ar file
Exclude files listed in
.Ar file .
.It Fl -anchored
Exclude patterns match file name start (default).
.It Fl -no-anchored
Exclude patterns match after any /.
.It Fl -ignore-case
Exclude patterns ignore case.
.It Fl -no-ignore-case
Exclude patterns are case sensitive (default).
.It Fl -wildcards
Exclude patterns use wildcards (default).
.It Fl -no-wildcards
Exclude patterns are plain strings.
.It Fl -wildcards-match-slash
Exclude pattern wildcards match '/' (default).
.It Fl -no-wildcards-match-slash
Exclude pattern wildcards do not match '/'.
.It Fl Z
.It Fl -compress
.It Fl -uncompress
Filter the archive through
.Xr compress 1 .
.It Fl z
.It Fl -gzip
.It Fl -ungzip
.It Fl -gunzip
Filter the archive through
.Xr gzip 1 .
.It Fl -use-compress-program Ar program
Filter the archive through
.Ar program
(which must accept
.Fl d
to mean
.Dq decompress ) .
.It Fl Xo
.Op Cm 0 Ns - Ns Cm 7 Ns
.Op Cm lmh
Specify tape drive and density.
program examines the following environment variables.
.Bl -tag -width "POSIXLY_CORRECT"
will process flag arguments that appear in the file list.
If set in the environment, this causes
to consider the first
non-flag argument to terminate flag processing, as per the POSIX specification.
In interactive mode, a permissible response to the prompt is to
request to spawn a subshell, which will be
.Pa /bin/sh
unless the
variable is set.
Sets the backup suffix used by 
.Nm .
Default is '~'.
.Nm Ns 's
default tape drive (which is still overridden by the
.Fl f
The environment variable
can hold a set of default options for
.Nm .
These options are interpreted first and can be overwritten by explicit command
line parameters.
The TAR_RSH environment variable allows you to override the default
shell used as the transport for
.Nm .
Sets the backup method used by 
.Nm .
Possible values:
.Bl -tag -width "--backup"
.It t, numbered
make numbered backups
.It nil, existing
numbered if numbered backups exist, simple otherwise
.It never, simple
always make simple backups
Default behaviour is 'existing'.
.Bl -tag -width "/dev/sa0"
.It Pa /dev/sa0
The default tape drive.
To create an archive on tape drive
.Pa /dev/sa0
with a block size of 20 blocks, containing files named
.Pa bert
.Pa ernie ,
you can enter
.Dl "tar cfb /dev/sa0 20 bert ernie"
.Dl "tar --create --file /dev/sa0 --block-size 20 bert ernie"
Note that the
.Fl f
.Fl b
flags both require arguments, which they take from the command line in
the order they were listed in the command word.
.Pa /dev/sa0
is the default device, and 20 is the default block
size, the above example could have simply been
.Dl "tar c bert ernie"
To extract all the C sources and headers from an archive named
.Pa backup.tar ,
.Dl "tar xf backup.tar '*.[ch]'"
Note that the pattern must be quoted to prevent the shell from
attempting to expand it according the files in the current working
directory (the shell does not have access to the list of files in
the archive, of course).
To move file hierarchies, use a command line like this:
.Bd -literal
tar -cf - -C srcdir . | tar xpf - -C destdir
To create a compressed archive on diskette, using
.Xr gzip 1 ,
use a command-line like
.Dl "tar --block-compress -z -c -v -f /dev/fd1a -b 36 tar/"
Note that you cannot mix bundled flags and
.Fl -style
flags; you can use
single-letter flags in the manner above, rather than having to type
.Dl "tar --block-compress --gzip --verbose --file /dev/fd1a --block-size 20 tar/"
The above-created diskette can be listed with
.Dl "tar tvfbz /dev/fd1a 36"
To join two
archives into a single archive, use
.Dl "tar Af archive1.tar archive2.tar"
which will add the files contained in
.Pa archive2.tar
onto the end of
.Pa archive1.tar
(note that this can't be done by simply typing
.Dl "cat archive2.tar >> archive1.tar"
because of the end-of-file block at the end of a
To archive all files from the directory
.Pa srcdir ,
which were modified
after Feb. 9th 1997, 13:00 h, use
.Dl "tar -c -f backup.tar --newer-mtime 'Feb 9 13:15 1997' srcdir/"
Other possible time specifications are
.Sq "02/09/97 13:15" ,
.Sq "1997-02-09 13:15" ,
.Sq "13:15 9 Feb 1997" ,
.Sq "9 Feb 1997 13:15" , 
.Sq "Feb. 9, 1997 1:15pm" ,
.Sq "09-Feb" ,
.Sq "3 weeks ago"
.Sq "May first Sunday" .
To specify the correct time zone use either e.g.\&
.Sq "13:15 CEST"
.Sq "13:15+200" .
.Xr bzip2 1 ,
.Xr compress 1 ,
.Xr gzip 1 ,
.Xr pax 1 ,
.Xr rmt 8 ,
info tar
format has a rich history, dating back to Sixth Edition
.Ux .
The current implementation of
is the GNU implementation, which
originated as the public-domain
written by
.An John Gilmore .
.An -nosplit
A cast of thousands, including [as listed in the
.Pa ChangeLog
file in the source]
.An John Gilmore
(author of original public domain version),
.An Jay Fenlason
(first GNU author),
.An Joy Kendall ,
.An Jim Kingdon ,
.An David J. MacKenzie ,
.An Michael I Bushnell ,
.An Noah Friedman ,
and innumerable others who have contributed fixes and additions.
Man page obtained by the
group from the
.Nx 1.0
.Fl C
feature does not work like historical
programs, and is probably untrustworthy.
.Fl A 
command should work to join an arbitrary number of
together, but it does not; attempting to do so leaves the
end-of-archive blocks in place for the second and subsequent archives.
file format is a semi fixed width field format, and the field
for device numbers were designed for 16 bit (8 major, 8 minor)
and can not absorb our 32 bit (8 major, 16+8 minor) numbers.