This is m4.info, produced by makeinfo version 4.8 from
/home/eblake/m4-patch/doc/m4.texinfo.
This manual is for GNU M4 (version 1.4.6, 24 August 2006), a package
containing an implementation of the m4 macro language.
Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 2004, 2005, 2006
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License."
INFO-DIR-SECTION GNU programming tools
START-INFO-DIR-ENTRY
* M4: (m4). A powerful macro processor.
END-INFO-DIR-ENTRY
File: m4.info, Node: Top, Next: Preliminaries, Up: (dir)
GNU M4
******
This manual is for GNU M4 (version 1.4.6, 24 August 2006), a package
containing an implementation of the m4 macro language.
Copyright (C) 1989, 1990, 1991, 1992, 1993, 1994, 2004, 2005, 2006
Free Software Foundation, Inc.
Permission is granted to copy, distribute and/or modify this
document under the terms of the GNU Free Documentation License,
Version 1.2 or any later version published by the Free Software
Foundation; with no Invariant Sections, no Front-Cover Texts, and
no Back-Cover Texts. A copy of the license is included in the
section entitled "GNU Free Documentation License."
GNU `m4' is an implementation of the traditional UNIX macro
processor. It is mostly SVR4 compatible, although it has some
extensions (for example, handling more than 9 positional parameters to
macros). `m4' also has builtin functions for including files, running
shell commands, doing arithmetic, etc. Autoconf needs GNU `m4' for
generating `configure' scripts, but not for running them.
GNU `m4' was originally written by Rene' Seindal, with subsequent
changes by Franc,ois Pinard and other volunteers on the Internet. All
names and email addresses can be found in the files `AUTHORS' and
`THANKS' from the GNU M4 distribution.
This is release 1.4.6. It is now considered stable: future
releases in the 1.4.x series are only meant to fix bugs, increase speed,
or improve documentation. However...
An experimental feature, which would improve `m4' usefulness, allows
for changing the syntax for what is a "word" in `m4'. You should use:
./configure --enable-changeword
if you want this feature compiled in. The current implementation
slows down `m4' considerably and is hardly acceptable. In the future,
`m4' 2.0 will come with a different set of new features that provide
similar capabilities, but without the inefficiencies, so changeword
will go away and _you should not count on it_.
* Menu:
* Preliminaries:: Introduction and preliminaries
* Syntax:: Lexical and syntactic conventions
* Macros:: How to invoke macros
* Definitions:: How to define new macros
* Conditionals:: Conditionals, loops, and recursion
* Debugging:: How to debug macros and input
* Input Control:: Input control
* File Inclusion:: File inclusion
* Diversions:: Diverting and undiverting output
* Text handling:: Macros for text handling
* Arithmetic:: Macros for doing arithmetic
* Shell commands:: Macros for running shell commands
* Miscellaneous:: Miscellaneous builtin macros
* Frozen files:: Fast loading of frozen state
* Compatibility:: Compatibility with other versions of m4
* Answers:: Correct version of some examples
* Copying This Manual:: How to make copies of this manual
* Indices:: Indices of concepts and macros
--- The Detailed Node Listing ---
Introduction and preliminaries
* Intro:: Introduction to `m4'
* History:: Historical references
* Invoking m4:: Invoking `m4'
* Bugs:: Problems and bugs
* Manual:: Using this manual
Lexical and syntactic conventions
* Names:: Macro names
* Quoted strings:: Quoting input to m4
* Comments:: Comments in m4 input
* Other tokens:: Other kinds of input tokens
* Input processing:: How m4 copies input to output
How to invoke macros
* Invocation:: Macro invocation
* Inhibiting Invocation:: Preventing macro invocation
* Macro Arguments:: Macro arguments
* Quoting Arguments:: On Quoting Arguments to macros
* Macro expansion:: Expanding macros
How to define new macros
* Define:: Defining a new macro
* Arguments:: Arguments to macros
* Pseudo Arguments:: Pseudo arguments to macros
* Undefine:: Deleting a macro
* Defn:: Renaming macros
* Pushdef:: Temporarily redefining macros
* Indir:: Indirect call of macros
* Builtin:: Indirect call of builtins
Conditionals, loops, and recursion
* Ifdef:: Testing if a macro is defined
* Ifelse:: If-else construct, or multibranch
* Loops:: Loops and recursion in m4
How to debug macros and input
* Dumpdef:: Displaying macro definitions
* Trace:: Tracing macro calls
* Debug Levels:: Controlling debugging output
* Debug Output:: Saving debugging output
Input control
* Dnl:: Deleting whitespace in input
* Changequote:: Changing the quote characters
* Changecom:: Changing the comment delimiters
* Changeword:: Changing the lexical structure of words
* M4wrap:: Saving input until end of input
File inclusion
* Include:: Including named files
* Search Path:: Searching for include files
Diverting and undiverting output
* Divert:: Diverting output
* Undivert:: Undiverting output
* Divnum:: Diversion numbers
* Cleardiv:: Discarding diverted text
Macros for text handling
* Len:: Calculating length of strings
* Index macro:: Searching for substrings
* Regexp:: Searching for regular expressions
* Substr:: Extracting substrings
* Translit:: Translating characters
* Patsubst:: Substituting text by regular expression
* Format:: Formatting strings (printf-like)
Macros for doing arithmetic
* Incr:: Decrement and increment operators
* Eval:: Evaluating integer expressions
Running shell commands
* Platform macros:: Determining the platform
* Syscmd:: Executing simple commands
* Esyscmd:: Reading the output of commands
* Sysval:: Exit status
* Maketemp:: Making names for temporary files
Miscellaneous builtin macros
* Errprint:: Printing error messages
* Location:: Printing current location
* M4exit:: Exiting from m4
Fast loading of frozen state
* Using frozen files:: Using frozen files
* Frozen file format:: Frozen file format
Compatibility with other versions of `m4'
* Extensions:: Extensions in GNU M4
* Incompatibilities:: Facilities in System V m4 not in GNU M4
* Other Incompatibilities:: Other incompatibilities
Copying This Manual
* GNU Free Documentation License:: License for copying this manual
Indices
* Concept index:: Index for many concepts
* Macro index:: Index for all m4 macros
File: m4.info, Node: Preliminaries, Next: Syntax, Prev: Top, Up: Top
1 Introduction and preliminaries
********************************
This first chapter explains what GNU `m4' is, where `m4' comes from,
how to read and use this documentation, how to call the `m4' program,
and how to report bugs about it. It concludes by giving tips for
reading the remainder of the manual.
The following chapters then detail all the features of the `m4'
language.
* Menu:
* Intro:: Introduction to `m4'
* History:: Historical references
* Invoking m4:: Invoking `m4'
* Bugs:: Problems and bugs
* Manual:: Using this manual
File: m4.info, Node: Intro, Next: History, Up: Preliminaries
1.1 Introduction to `m4'
========================
`m4' is a macro processor, in the sense that it copies its input to the
output, expanding macros as it goes. Macros are either builtin or
user-defined, and can take any number of arguments. Besides just doing
macro expansion, `m4' has builtin functions for including named files,
running shell commands, doing integer arithmetic, manipulating text in
various ways, performing recursion, etc.... `m4' can be used either as
a front-end to a compiler, or as a macro processor in its own right.
The `m4' macro processor is widely available on all UNIXes, and has
been standardized by POSIX. Usually, only a small percentage of users
are aware of its existence. However, those who find it often become
committed users. The popularity of GNU Autoconf, which requires GNU
`m4' for _generating_ `configure' scripts, is an incentive for many to
install it, while these people will not themselves program in `m4'.
GNU `m4' is mostly compatible with the System V, Release 3 version,
except for some minor differences. *Note Compatibility::, for more
details.
Some people find `m4' to be fairly addictive. They first use `m4'
for simple problems, then take bigger and bigger challenges, learning
how to write complex sets of `m4' macros along the way. Once really
addicted, users pursue writing of sophisticated `m4' applications even
to solve simple problems, devoting more time debugging their `m4'
scripts than doing real work. Beware that `m4' may be dangerous for
the health of compulsive programmers.
File: m4.info, Node: History, Next: Invoking m4, Prev: Intro, Up: Preliminaries
1.2 Historical references
=========================
`GPM' was an important ancestor of `m4'. See C. Stratchey: "A General
Purpose Macro generator", Computer Journal 8,3 (1965), pp. 225 ff.
`GPM' is also succinctly described into David Gries classic "Compiler
Construction for Digital Computers".
The classic B. Kernighan and P.J. Plauger: "Software Tools",
Addison-Wesley, Inc. (1976) describes and implements a Unix
macro-processor language, which inspired Dennis Ritchie to write `m3',
a macro processor for the AP-3 minicomputer.
Kernighan and Ritchie then joined forces to develop the original
`m4', as described in "The M4 Macro Processor", Bell Laboratories
(1977). It had only 21 builtin macros.
While `GPM' was more _pure_, `m4' is meant to deal with the true
intricacies of real life: macros can be recognized without being
pre-announced, skipping whitespace or end-of-lines is easier, more
constructs are builtin instead of derived, etc.
Originally, the Kernighan and Plauger macro-processor, and then
`m3', formed the engine for the Rational FORTRAN preprocessor, that is,
the `Ratfor' equivalent of `cpp'. Later, `m4' was used as a frontend
for `Ratfor', `C' and `Cobol'.
Rene' Seindal released his implementation of `m4', GNU `m4', in
1990, with the aim of removing the artificial limitations in many of
the traditional `m4' implementations, such as maximum line length,
macro size, or number of macros.
The late Professor A. Dain Samples described and implemented a
further evolution in the form of `M5': "User's Guide to the M5 Macro
Language: 2nd edition", Electronic Announcement on comp.compilers
newsgroup (1992).
Franc,ois Pinard took over maintenance of GNU `m4' in 1992, until
1994 when he released GNU `m4' 1.4, which was the stable release for 10
years. It was at this time that GNU Autoconf decided to require GNU
`m4' as its underlying engine, since all other implementations of `m4'
had too many limitations.
More recently, in 2004, Paul Eggert released 1.4.1 and 1.4.2 which
addressed some long standing bugs in the venerable 1.4 release. Then
in 2005 Gary V. Vaughan collected together the many patches to GNU `m4'
1.4 that were floating around the net and released 1.4.3 and 1.4.4.
And in 2006, Eric Blake joined the team and prepared patches for the
release of 1.4.5 and 1.4.6.
Meanwhile, development has continued on new features for `m4', such
as dynamic module loading and additional builtins. When complete, GNU
`m4' 2.0 will start a new series of releases.
File: m4.info, Node: Invoking m4, Next: Bugs, Prev: History, Up: Preliminaries
1.3 Invoking `m4'
=================
The format of the `m4' command is:
`m4' [OPTION...] [FILE...]
All options begin with `-', or if long option names are used, with a
`--'. A long option name need not be written completely, any
unambiguous prefix is sufficient. Options may be intermixed with files,
use `--' as a marker to denote the end of options. `m4' understands
the following options, grouped by functionality.
Several options control the overall operation of `m4':
`--help'
Print a help summary on standard output, then immediately exit
`m4' without reading any input files.
`--version'
Print the version number of the program on standard output, then
immediately exit `m4' without reading any input files.
`-E'
`--fatal-warnings'
Stop execution and exit `m4' once the first warning has been
issued, considering all of them to be fatal.
`-e'
`--interactive'
Makes this invocation of `m4' interactive. This means that all
output will be unbuffered, and interrupts will be ignored.
`-P'
`--prefix-builtins'
Internally modify _all_ builtin macro names so they all start with
the prefix `m4_'. For example, using this option, one should write
`m4_define' instead of `define', and `m4___file__' instead of
`__file__'. This option has no effect if `-R' is also specified.
`-Q'
`--quiet'
`--silent'
Suppress warnings, such as missing or superfluous arguments in
macro calls, or treating the empty string as zero.
`-W REGEXP'
`--word-regexp=REGEXP'
Use REGEXP as an alternative syntax for macro names. This
experimental option will not be present on all GNU `m4'
implementations (*note Changeword::).
Several options allow `m4' to behave more like a preprocessor.
Macro definitions and deletions can be made on the command line, the
search path can be altered, and the output file can track where the
input came from. These features occur with the following options:
`-D NAME[=VALUE]'
`--define=NAME[=VALUE]'
This enters NAME into the symbol table, before any input files are
read. If `=VALUE' is missing, the value is taken to be the empty
string. The VALUE can be any string, and the macro can be defined
to take arguments, just as if it was defined from within the
input. This option may be given more than once; order is
significant, and redefining the same NAME loses the previous value.
`-I DIRECTORY'
`--include=DIRECTORY'
Make `m4' search DIRECTORY for included files that are not found
in the current working directory. *Note Search Path::, for more
details. This option may be given more than once.
`-s'
`--synclines'
Generate synchronization lines, for use by the C preprocessor or
other similar tools. This is useful, for example, when `m4' is
used as a front end to a compiler. Source file name and line
number information is conveyed by directives of the form `#line
LINENUM "FILE"', which are inserted as needed into the middle of
the output. Such directives mean that the following line
originated or was expanded from the contents of input file FILE at
line LINENUM. The `"FILE"' part is often omitted when the file
name did not change from the previous directive.
Synchronization directives are always given on complete lines by
themselves. When a synchronization discrepancy occurs in the
middle of an output line, the associated synchronization directive
is delayed until the beginning of the next generated line.
`-U NAME'
`--undefine=NAME'
This deletes any predefined meaning NAME might have. Obviously,
only predefined macros can be deleted in this way. This option
may be given more than once; undefining a NAME that does not have a
definition is silently ignored.
There are some limits within `m4' that can be tuned. For
compatibility, `m4' also accepts some options that control limits in
other implementations, but which are automatically unbounded (limited
only by your hardware constraints) in GNU `m4'.
`-G'
`--traditional'
Suppress all the extensions made in this implementation, compared
to the System V version. *Note Compatibility::, for a list of
these.
`-H NUM'
`--hashsize=NUM'
Make the internal hash table for symbol lookup be NUM entries big.
For better performance, the number should be prime, but this is not
checked. The default is 509 entries. It should not be necessary
to increase this value, unless you define an excessive number of
macros.
`-L NUM'
`--nesting-limit=NUM'
Artificially limit the nesting of macro calls to NUM levels,
stopping program execution if this limit is ever exceeded. When
not specified, nesting is limited to 1024 levels.
The precise effect of this option might be more correctly
associated with textual nesting than dynamic recursion. It has
been useful when some complex `m4' input was generated by
mechanical means. Most users would never need this option. If
shown to be obtrusive, this option (which is still experimental)
might well disappear.
This option does _not_ have the ability to break endless
rescanning loops, since these do not necessarily consume much
memory or stack space. Through clever usage of rescanning loops,
one can request complex, time-consuming computations from `m4'
with useful results. Putting limitations in this area would break
`m4' power. There are many pathological cases:
`define(`a', `a')a' is only the simplest example (but *note
Compatibility::). Expecting GNU `m4' to detect these would be a
little like expecting a compiler system to detect and diagnose
endless loops: it is a quite _hard_ problem in general, if not
undecidable!
`-B NUM'
`-S NUM'
`-T NUM'
These options are present for compatibility with System V `m4', but
do nothing in this implementation.
`-N NUM'
`--diversions=NUM'
These options are present only for compatibility with previous
versions of GNU `m4', and were controlling the number of possible
diversions which could be used at the same time. They do nothing,
because there is no fixed limit anymore.
GNU `m4' comes with a feature of freezing internal state (*note
Frozen files::). This can be used to speed up `m4' execution when
reusing a common initialization script.
`-F FILE'
`--freeze-state=FILE'
Once execution is finished, write out the frozen state on the
specified FILE. It is conventional, but not required, for FILE to
end in `.m4f'.
`-R FILE'
`--reload-state=FILE'
Before execution starts, recover the internal state from the
specified frozen FILE. The options `-D', `-U', and `-t' take
effect after state is reloaded, but before the input files are
read.
Finally, there are several options for aiding in debugging `m4'
scripts.
`-d[FLAGS]'
`--debug[=FLAGS]'
Set the debug-level according to the flags FLAGS. The debug-level
controls the format and amount of information presented by the
debugging functions. *Note Debug Levels::, for more details on
the format and meaning of FLAGS. If omitted, FLAGS defaults to
`aeq'.
`-l NUM'
`--arglength=NUM'
Restrict the size of the output generated by macro tracing to NUM
characters per trace line. If unspecified or zero, output is
unlimited. *Note Debug Levels::, for more details.
`-o FILE'
`--error-output=FILE'
Redirect `dumpdef' output, debug messages, and trace output to the
named FILE. Warnings, error messages, and `errprint' output are
still printed to standard error. If unspecified, debug output goes
to standard error; if empty, debug output is discarded. *Note
Debug Output::, for more details.
`-t NAME'
`--trace=NAME'
This enables tracing for the macro NAME, at any point where it is
defined. NAME need not be defined when this option is given.
This option may be given more than once. *Note Trace::, for more
details.
The remaining arguments on the command line are taken to be input
file names. If no names are present, the standard input is read. A
file name of `-' is taken to mean the standard input. It is
conventional, but not required, for input files to end in `.m4'.
The input files are read in the sequence given. The standard input
can only be read once, so the file name `-' should only appear once on
the command line. It is an error if an input file ends in the middle of
argument collection, a comment, or a quoted string.
If none of the input files invoked `m4exit' (*note M4exit::), the
exit status of `m4' will be 0 for success, 1 for general failure (such
as problems with reading an input file), and 63 for version mismatch
(*note Using frozen files::).
If you need to read a file whose name starts with a `-', you can
specify it as `./-file', or use `--' to mark the end of options.
File: m4.info, Node: Bugs, Next: Manual, Prev: Invoking m4, Up: Preliminaries
1.4 Problems and bugs
=====================
If you have problems with GNU M4 or think you've found a bug, please
report it. Before reporting a bug, make sure you've actually found a
real bug. Carefully reread the documentation and see if it really says
you can do what you're trying to do. If it's not clear whether you
should be able to do something or not, report that too; it's a bug in
the documentation!
Before reporting a bug or trying to fix it yourself, try to isolate
it to the smallest possible input file that reproduces the problem.
Then send us the input file and the exact results `m4' gave you. Also
say what you expected to occur; this will help us decide whether the
problem was really in the documentation.
Once you've got a precise problem, send e-mail to (Internet)
<bug-m4@gnu.org>. Please include the version number of `m4' you are
using. You can get this information with the command `m4 --version'.
Also provide details about the platform you are executing on.
Non-bug suggestions are always welcome as well. If you have
questions about things that are unclear in the documentation or are
just obscure features, please report them too.
File: m4.info, Node: Manual, Prev: Bugs, Up: Preliminaries
1.5 Using this manual
=====================
This manual contains a number of examples of `m4' input and output, and
a simple notation is used to distinguish input, output and error
messages from `m4'. Examples are set out from the normal text, and
shown in a fixed width font, like this
This is an example of an example!
To distinguish input from output, all output from `m4' is prefixed
by the string `=>', and all error messages by the string `error-->'.
Thus
Example of input line
=>Output line from m4
error-->and an error message
The sequence `^D' in an example indicates the end of the input file.
The majority of these examples are self-contained, and you can run them
with similar results by invoking `m4 -d'. In fact, the testsuite that
is bundled in the GNU M4 package consists of the examples in this
document!
As each of the predefined macros in `m4' is described, a prototype
call of the macro will be shown, giving descriptive names to the
arguments, e.g.,
-- Composite: example (STRING, [COUNT = `1'], [ARGUMENT]...)
This is a sample prototype. There is not really a macro named
`example', but this documents that if there were, it would be a
Composite macro, rather than a Builtin. It requires at least one
argument, STRING. Remember that in `m4', there must not be a
space between the macro name and the opening parenthesis, unless
it was intended to call the macro without any arguments. The
brackets around COUNT and ARGUMENT show that these arguments are
optional. If COUNT is omitted, the macro behaves as if count were
`1', whereas if ARGUMENT is omitted, the macro behaves as if it
were the empty string. A blank argument is not the same as an
omitted argument. For example, `example(`a')', `example(`a',`1')',
and `example(`a',`1',)' would behave identically with COUNT set to
`1'; while `example(`a',)' and `example(`a',`')' would explicitly
pass the empty string for COUNT. The ellipses (`...') show that
the macro processes additional arguments after ARGUMENT, rather
than ignoring them.
All macro arguments in `m4' are strings, but some are given special
interpretation, e.g., as numbers, file names, regular expressions, etc.
The documentation for each macro will state how the parameters are
interpreted, and what happens if the argument cannot be parsed
according to the desired interpretation. Unless specified otherwise, a
parameter specified to be a number is parsed as a decimal, even if the
argument has leading zeros; and parsing the empty string as a number
results in 0 rather than an error, although a warning will be issued.
This document consistently writes and uses "builtin", without a
hyphen, as if it were an English word. This is how the `builtin'
primitive is spelled within `m4'.
File: m4.info, Node: Syntax, Next: Macros, Prev: Preliminaries, Up: Top
2 Lexical and syntactic conventions
***********************************
As `m4' reads its input, it separates it into "tokens". A token is
either a name, a quoted string, or any single character, that is not a
part of either a name or a string. Input to `m4' can also contain
comments. GNU `m4' does not yet understand locales; all operations are
byte-oriented rather than character-oriented. However, `m4' is
eight-bit clean, so you can use non-ASCII characters in quoted strings
(*note Changequote::), comments (*note Changecom::), and macro names
(*note Indir::), with the exception of the NUL character (the zero byte
`'\0'').
* Menu:
* Names:: Macro names
* Quoted strings:: Quoting input to m4
* Comments:: Comments in m4 input
* Other tokens:: Other kinds of input tokens
* Input processing:: How m4 copies input to output
File: m4.info, Node: Names, Next: Quoted strings, Up: Syntax
2.1 Names
=========
A name is any sequence of letters, digits, and the character `_'
(underscore), where the first character is not a digit. `m4' will use
the longest such sequence found in the input. If a name has a macro
definition, it will be subject to macro expansion (*note Macros::).
Names are case-sensitive.
Examples of legal names are: `foo', `_tmp', and `name01'.
File: m4.info, Node: Quoted strings, Next: Comments, Prev: Names, Up: Syntax
2.2 Quoted strings
==================
A quoted string is a sequence of characters surrounded by quote
strings, defaulting to ``' and `'', where the nested begin and end
quotes within the string are balanced. The value of a string token is
the text, with one level of quotes stripped off. Thus
`'
=>
is the empty string, and double-quoting turns into single-quoting.
``quoted''
=>`quoted'
The quote characters can be changed at any time, using the builtin
macro `changequote'. *Note Changequote::, for more information.
File: m4.info, Node: Comments, Next: Other tokens, Prev: Quoted strings, Up: Syntax
2.3 Comments
============
Comments in `m4' are normally delimited by the characters `#' and
newline. All characters between the comment delimiters are ignored,
but the entire comment (including the delimiters) is passed through to
the output--comments are _not_ discarded by `m4'.
Comments cannot be nested, so the first newline after a `#' ends the
comment. The commenting effect of the begin-comment string can be
inhibited by quoting it.
`quoted text' # `commented text'
=>quoted text # `commented text'
`quoting inhibits' `#' `comments'
=>quoting inhibits # comments
The comment delimiters can be changed to any string at any time,
using the builtin macro `changecom'. *Note Changecom::, for more
information.
File: m4.info, Node: Other tokens, Next: Input processing, Prev: Comments, Up: Syntax
2.4 Other tokens
================
Any character, that is neither a part of a name, nor of a quoted string,
nor a comment, is a token by itself. When not in the context of macro
expansion, all of these tokens are just copied to output. However,
during macro expansion, whitespace characters (space, tab, newline,
formfeed, carriage return, vertical tab), parentheses (`(' and `)'),
comma (`,'), and dollar (`$') have additional roles, explained later.
File: m4.info, Node: Input processing, Prev: Other tokens, Up: Syntax
2.5 Input Processing
====================
As `m4' reads the input token by token, it will copy each token
directly to the output immediately.
The exception is when it finds a word with a macro definition. In
that case `m4' will calculate the macro's expansion, possibly reading
more input to get the arguments. It then inserts the expansion in front
of the remaining input. In other words, the resulting text from a macro
call will be read and parsed into tokens again.
`m4' expands a macro as soon as possible. If it finds a macro call
when collecting the arguments to another, it will expand the second
call first. For a running example, examine how `m4' handles this input:
format(`Result is %d', eval(`2**15'))
First, `m4' sees that the token `format' is a macro name, so it
collects the tokens `(', ``Result is %d'', `,', and ` ', before
encountering another potential macro. Sure enough, `eval' is a macro
name, so the nested argument collection picks up `(', ``2**15'', and
`)', invoking the eval macro with the lone argument of `2**15'. The
expansion of `eval(2**15)' is `32768', which is then rescanned as the
five tokens `3', `2', `7', `6', and `8'; and combined with the next
`)', the format macro now has all its arguments, as if the user had
typed:
format(`Result is %d', 32768)
The format macro expands to `Result is 32768', and we have another
round of scanning for the tokens `Result', ` ', `is', ` ', `3', `2',
`7', `6', and `8'. None of these are macros, so the final output is
=>Result is 32768
The order in which `m4' expands the macros can be explored using the
*Note Trace:: facilities of GNU `m4'.
This process continues until there are no more macro calls to expand
and all the input has been consumed.
File: m4.info, Node: Macros, Next: Definitions, Prev: Syntax, Up: Top
3 How to invoke macros
**********************
This chapter covers macro invocation, macro arguments and how macro
expansion is treated.
* Menu:
* Invocation:: Macro invocation
* Inhibiting Invocation:: Preventing macro invocation
* Macro Arguments:: Macro arguments
* Quoting Arguments:: On Quoting Arguments to macros
* Macro expansion:: Expanding macros
File: m4.info, Node: Invocation, Next: Inhibiting Invocation, Up: Macros
3.1 Macro invocation
====================
Macro invocations has one of the forms
name
which is a macro invocation without any arguments, or
name(arg1, arg2, ..., argN)
which is a macro invocation with N arguments. Macros can have any
number of arguments. All arguments are strings, but different macros
might interpret the arguments in different ways.
The opening parenthesis _must_ follow the NAME directly, with no
spaces in between. If it does not, the macro is called with no
arguments at all.
For a macro call to have no arguments, the parentheses _must_ be
left out. The macro call
name()
is a macro call with one argument, which is the empty string, not a call
with no arguments.
File: m4.info, Node: Inhibiting Invocation, Next: Macro Arguments, Prev: Invocation, Up: Macros
3.2 Preventing macro invocation
===============================
An innovation of the `m4' language, compared to some of its
predecessors (like Stratchey's `GPM', for example), is the ability to
recognize macro calls without resorting to any special, prefixed
invocation character. While generally useful, this feature might
sometimes be the source of spurious, unwanted macro calls. So, GNU
`m4' offers several mechanisms or techniques for inhibiting the
recognition of names as macro calls.
First of all, many builtin macros cannot meaningfully be called
without arguments. For any of these macros, whenever an opening
parenthesis does not immediately follow their name, the builtin macro
call is not triggered. This solves the most usual cases, like for
`include' or `eval'. Later in this document, the sentence "This macro
is recognized only with parameters" refers to this specific provision.
There is also a command line option (`--prefix-builtins', or `-P',
*note Invoking m4::) which requires all builtin macro names to be
prefixed by `m4_' for them to be recognized. The option has no effect
whatsoever on user defined macros. For example, with this option, one
has to write `m4_dnl' and even `m4_m4exit'.
Another alternative is to redefine problematic macros to a name less
likely to cause conflicts, *Note Definitions::.
If your version of GNU `m4' has the `changeword' feature compiled
in, it offers far more flexibility in specifying the syntax of macro
names, both builtin or user-defined. *Note Changeword::, for more
information on this experimental feature.
Of course, the simplest way to prevent a name from being interpreted
as a call to an existing macro is to quote it. The remainder of this
section studies a little more deeply how quoting affects macro
invocation, and how quoting can be used to inhibit macro invocation.
Even if quoting is usually done over the whole macro name, it can
also be done over only a few characters of this name (provided, of
course, that the unquoted portions are not also a macro). It is also
possible to quote the empty string, but this works only _inside_ the
name. For example:
`divert'
=>divert
`d'ivert
=>divert
di`ver't
=>divert
div`'ert
=>divert
all yield the string `divert'. While in both:
`'divert
=>
divert`'
=>
the `divert' builtin macro will be called, which expands to the empty
string.
The output of macro evaluations is always rescanned. The following
example would yield the string `de', exactly as if `m4' has been given
`substr(`abcde', `3', `2')' as input:
define(`x', `substr(ab')
=>
define(`y', `cde, `3', `2')')
=>
x`'y
=>de
Unquoted strings on either side of a quoted string are subject to
being recognized as macro names. In the following example, quoting the
empty string allows for the second `macro' to be recognized as such:
define(`macro', `m')
=>
macro(`m')macro
=>mmacro
macro(`m')`'macro
=>mm
Quoting may prevent recognizing as a macro name the concatenation of
a macro expansion with the surrounding characters. In this example:
define(`macro', `di$1')
=>
macro(`v')`ert'
=>divert
macro(`v')ert
=>
the input will produce the string `divert'. When the quotes were
removed, the `divert' builtin was called instead.
File: m4.info, Node: Macro Arguments, Next: Quoting Arguments, Prev: Inhibiting Invocation, Up: Macros
3.3 Macro arguments
===================
When a name is seen, and it has a macro definition, it will be expanded
as a macro.
If the name is followed by an opening parenthesis, the arguments
will be collected before the macro is called. If too few arguments are
supplied, the missing arguments are taken to be the empty string.
However, some builtins are documented to behave differently for a
missing optional argument than for an explicit empty string. If there
are too many arguments, the excess arguments are ignored. Unquoted
leading whitespace is stripped off all arguments.
Normally `m4' will issue warnings if a builtin macro is called with
an inappropriate number of arguments, but it can be suppressed with the
`-Q' command line option (*note Invoking m4::). For user defined
macros, there is no check of the number of arguments given.
Macros are expanded normally during argument collection, and whatever
commas, quotes and parentheses that might show up in the resulting
expanded text will serve to define the arguments as well. Thus, if FOO
expands to `, b, c', the macro call
bar(a foo, d)
is a macro call with four arguments, which are `a ', `b', `c' and `d'.
To understand why the first argument contains whitespace, remember that
leading unquoted whitespace is never part of an argument, but trailing
whitespace always is.
It is possible for a macro's definition to change during argument
collection, in which case the expansion uses the definition that was in
effect at the time the opening `(' was seen.
define(`f', `1')
=>
f(define(`f', `2'))
=>1
f
=>2
It is an error if the end of file occurs while collecting arguments.
define(
^D
error-->m4:stdin:1: ERROR: end of file in argument list
File: m4.info, Node: Quoting Arguments, Next: Macro expansion, Prev: Macro Arguments, Up: Macros
3.4 Quoting macro arguments
===========================
Each argument has leading unquoted whitespace removed. Within each
argument, all unquoted parentheses must match. For example, if FOO is
a macro,
foo(() (`(') `(')
is a macro call, with one argument, whose value is `() (() ('. Commas
separate arguments, except when they occur inside quotes, comments, or
unquoted parentheses, *Note Pseudo Arguments::, for examples.
It is common practice to quote all arguments to macros, unless you
are sure you want the arguments expanded. Thus, in the above example
with the parentheses, the `right' way to do it is like this:
foo(`() (() (')
It is, however, in certain cases necessary or convenient to leave out
quotes for some arguments, and there is nothing wrong in doing it. It
just makes life a bit harder, if you are not careful. For consistency,
this manual follows the rule of thumb that each layer of parentheses
introduces another layer of single quoting, except when showing the
consequences of quoting rules. This is done even when the quoted string
cannot be a macro, such as with integers.
File: m4.info, Node: Macro expansion, Prev: Quoting Arguments, Up: Macros
3.5 Macro expansion
===================
When the arguments, if any, to a macro call have been collected, the
macro is expanded, and the expansion text is pushed back onto the input
(unquoted), and reread. The expansion text from one macro call might
therefore result in more macros being called, if the calls are included,
completely or partially, in the first macro calls' expansion.
Taking a very simple example, if FOO expands to `bar', and BAR
expands to `Hello world', the input
foo
will expand first to `bar', and when this is reread and expanded, into
`Hello world'.
File: m4.info, Node: Definitions, Next: Conditionals, Prev: Macros, Up: Top
4 How to define new macros
**************************
Macros can be defined, redefined and deleted in several different ways.
Also, it is possible to redefine a macro without losing a previous
value, and bring back the original value at a later time.
* Menu:
* Define:: Defining a new macro
* Arguments:: Arguments to macros
* Pseudo Arguments:: Pseudo arguments to macros
* Undefine:: Deleting a macro
* Defn:: Renaming macros
* Pushdef:: Temporarily redefining macros
* Indir:: Indirect call of macros
* Builtin:: Indirect call of builtins
File: m4.info, Node: Define, Next: Arguments, Up: Definitions
4.1 Defining a macro
====================
The normal way to define or redefine macros is to use the builtin
`define':
-- Builtin: define (NAME, [EXPANSION])
Defines NAME to expand to EXPANSION. If EXPANSION is not given,
it is taken to be empty.
The expansion of `define' is void. The macro `define' is
recognized only with parameters.
The following example defines the macro FOO to expand to the text
`Hello World.'.
define(`foo', `Hello world.')
=>
foo
=>Hello world.
The empty line in the output is there because the newline is not a
part of the macro definition, and it is consequently copied to the
output. This can be avoided by use of the macro `dnl'. *Note Dnl::,
for details.
The first argument to `define' should be quoted; otherwise, if the
macro is already defined, you will be defining a different macro. This
example shows the problems with underquoting, since we did not want to
redefine `one':
define(foo, one)
=>
define(foo, two)
=>
one
=>two
As a GNU extension, the first argument to `define' does not have to
be a simple word. It can be any text string, even the empty string. A
macro with a non-standard name cannot be invoked in the normal way, as
the name is not recognised. It can only be referenced by the builtins
*Note Indir:: and *Note Defn::.
Arrays and associative arrays can be simulated by using this trick.
define(`array', `defn(format(``array[%d]'', `$1'))')
=>
define(`array_set', `define(format(``array[%d]'', `$1'), `$2')')
=>
array_set(`4', `array element no. 4')
=>
array_set(`17', `array element no. 17')
=>
array(`4')
=>array element no. 4
array(eval(`10 + 7'))
=>array element no. 17
Change the `%d' to `%s' and it is an associative array.
File: m4.info, Node: Arguments, Next: Pseudo Arguments, Prev: Define, Up: Definitions
4.2 Arguments to macros
=======================
Macros can have arguments. The Nth argument is denoted by `$n' in the
expansion text, and is replaced by the Nth actual argument, when the
macro is expanded. Replacement of arguments happens before rescanning,
regardless of how many nesting levels of quoting appear in the
expansion. Here is an example of a macro with two arguments. It
simply exchanges the order of the two arguments.
define(`exch', `$2, $1')
=>
exch(`arg1', `arg2')
=>arg2, arg1
This can be used, for example, if you like the arguments to `define'
to be reversed.
define(`exch', `$2, $1')
=>
define(exch(``expansion text'', ``macro''))
=>
macro
=>expansion text
*Note Quoting Arguments::, for an explanation of the double quotes.
(You should try and improve this example so that clients of exch do not
have to double quote. *note Answers::)
GNU `m4' allows the number following the `$' to consist of one or
more digits, allowing macros to have any number of arguments. This is
not so in UNIX implementations of `m4', which only recognize one digit.
As a special case, the zeroth argument, `$0', is always the name of
the macro being expanded.
define(`test', ``Macro name: $0'')
=>
test
=>Macro name: test
If you want quoted text to appear as part of the expansion text,
remember that quotes can be nested in quoted strings. Thus, in
define(`foo', `This is macro `foo'.')
=>
foo
=>This is macro foo.
The `foo' in the expansion text is _not_ expanded, since it is a quoted
string, and not a name.
File: m4.info, Node: Pseudo Arguments, Next: Undefine, Prev: Arguments, Up: Definitions
4.3 Special arguments to macros
===============================
There is a special notation for the number of actual arguments supplied,
and for all the actual arguments.
The number of actual arguments in a macro call is denoted by `$#' in
the expansion text. Thus, a macro to display the number of arguments
given can be
define(`nargs', `$#')
=>
nargs
=>0
nargs()
=>1
nargs(`arg1', `arg2', `arg3')
=>3
nargs(`commas can be quoted, like this')
=>1
nargs(arg1#inside comments, commas do not separate arguments
still arg1)
=>1
nargs((unquoted parentheses, like this, group arguments))
=>1
The notation `$*' can be used in the expansion text to denote all
the actual arguments, unquoted, with commas in between. For example
define(`echo', `$*')
=>
echo(arg1, arg2, arg3 , arg4)
=>arg1,arg2,arg3 ,arg4
Often each argument should be quoted, and the notation `$@' handles
that. It is just like `$*', except that it quotes each argument. A
simple example of that is:
define(`echo', `$@')
=>
echo(arg1, arg2, arg3 , arg4)
=>arg1,arg2,arg3 ,arg4
Where did the quotes go? Of course, they were eaten, when the
expanded text were reread by `m4'. To show the difference, try
define(`echo1', `$*')
=>
define(`echo2', `$@')
=>
define(`foo', `This is macro `foo'.')
=>
echo1(foo)
=>This is macro This is macro foo..
echo1(`foo')
=>This is macro foo.
echo2(foo)
=>This is macro foo.
echo2(`foo')
=>foo
*Note Trace::, if you do not understand this. As another example of the
difference, remember that comments encountered in arguments are passed
untouched to the macro, and that quoting disables comments.
define(`echo1', `$*')
=>
define(`echo2', `$)'
=>
define(`foo', `bar')
=>
echo1(#foo'foo
foo)
=>#foo'foo
=>bar
echo2(#foo'foo
foo)
=>#foobar
=>bar'
A `$' sign in the expansion text, that is not followed by anything
`m4' understands, is simply copied to the macro expansion, as any other
text is.
define(`foo', `$$$ hello $$$')
=>
foo
=>$$$ hello $$$
If you want a macro to expand to something like `$12', put a pair of
quotes after the `$'. This will prevent `m4' from interpreting the `$'
sign as a reference to an argument.
File: m4.info, Node: Undefine, Next: Defn, Prev: Pseudo Arguments, Up: Definitions
4.4 Deleting a macro
====================
A macro definition can be removed with `undefine':
-- Builtin: undefine (NAME...)
For each argument, remove the macro NAME. The macro names must
necessarily be quoted, since they will be expanded otherwise.
The expansion of `undefine' is void. The macro `undefine' is
recognized only with parameters.
foo bar blah
=>foo bar blah
define(`foo', `some')define(`bar', `other')define(`blah', `text')
=>
foo bar blah
=>some other text
undefine(`foo')
=>
foo bar blah
=>foo other text
undefine(`bar', `blah')
=>
foo bar blah
=>foo bar blah
Undefining a macro inside that macro's expansion is safe; the macro
still expands to the definition that was in effect at the `('.
define(`f', ``$0':$1')
=>
f(f(f(undefine(`f')`hello world')))
=>f:f:f:hello world
f(`bye')
=>f(bye)
It is not an error for NAME to have no macro definition. In that
case, `undefine' does nothing.
File: m4.info, Node: Defn, Next: Pushdef, Prev: Undefine, Up: Definitions
4.5 Renaming macros
===================
It is possible to rename an already defined macro. To do this, you need
the builtin `defn':
-- Builtin: defn (NAME)
Expands to the _quoted definition_ of NAME. If the argument is
not a defined macro, the expansion is void.
If NAME is a user-defined macro, the quoted definition is simply
the quoted expansion text. If, instead, NAME is a builtin, the
expansion is a special token, which points to the builtin's
internal definition. This token is only meaningful as the second
argument to `define' (and `pushdef'), and is ignored in any other
context.
The macro `defn' is recognized only with parameters.
Its normal use is best understood through an example, which shows
how to rename `undefine' to `zap':
define(`zap', defn(`undefine'))
=>
zap(`undefine')
=>
undefine(`zap')
=>undefine(zap)
In this way, `defn' can be used to copy macro definitions, and also
definitions of builtin macros. Even if the original macro is removed,
the other name can still be used to access the definition.
The fact that macro definitions can be transferred also explains why
you should use `$0', rather than retyping a macro's name in its
definition:
define(`foo', `This is `$0'')
=>
define(`bar', defn(`foo'))
=>
bar
=>This is bar
Macros used as string variables should be referred through `defn',
to avoid unwanted expansion of the text:
define(`string', `The macro dnl is very useful
')
=>
string
=>The macro defn(`string')
=>The macro dnl is very useful
=>
However, it is important to remember that `m4' rescanning is purely
textual. If an unbalanced end-quote string occurs in a macro
definition, the rescan will see that embedded quote as the termination
of the quoted string, and the remainder of the macro's definition will
be rescanned unquoted. Thus it is a good idea to avoid unbalanced
end-quotes in macro definitions or arguments to macros.
define(`foo', a'a)
=>
define(`a', `A')
=>
define(`echo', `$)'
=>
foo
=>A'A
defn(`foo')
=>aA'
echo(foo)
=>AA'
File: m4.info, Node: Pushdef, Next: Indir, Prev: Defn, Up: Definitions
4.6 Temporarily redefining macros
=================================
It is possible to redefine a macro temporarily, reverting to the
previous definition at a later time. This is done with the builtins
`pushdef' and `popdef':
-- Builtin: pushdef (NAME, [EXPANSION])
-- Builtin: popdef (NAME...)
Analogous to `define' and `undefine'.
These macros work in a stack-like fashion. A macro is temporarily
redefined with `pushdef', which replaces an existing definition of
NAME, while saving the previous definition, before the new one is
installed. If there is no previous definition, `pushdef' behaves
exactly like `define'.
If a macro has several definitions (of which only one is
accessible), the topmost definition can be removed with `popdef'.
If there is no previous definition, `popdef' behaves like
`undefine'.
The expansion of both `pushdef' and `popdef' is void. The macros
`pushdef' and `popdef' are recognized only with parameters.
define(`foo', `Expansion one.')
=>
foo
=>Expansion one.
pushdef(`foo', `Expansion two.')
=>
foo
=>Expansion two.
pushdef(`foo', `Expansion three.')
=>
pushdef(`foo', `Expansion four.')
=>
popdef(`foo')
=>
foo
=>Expansion three.
popdef(`foo', `foo')
=>
foo
=>Expansion one.
popdef(`foo')
=>
foo
=>foo
If a macro with several definitions is redefined with `define', the
topmost definition is _replaced_ with the new definition. If it is
removed with `undefine', _all_ the definitions are removed, and not
only the topmost one.
define(`foo', `Expansion one.')
=>
foo
=>Expansion one.
pushdef(`foo', `Expansion two.')
=>
foo
=>Expansion two.
define(`foo', `Second expansion two.')
=>
foo
=>Second expansion two.
undefine(`foo')
=>
foo
=>foo
Local variables within macros are made with `pushdef' and `popdef'.
At the start of the macro a new definition is pushed, within the macro
it is manipulated and at the end it is popped, revealing the former
definition.
It is possible to temporarily redefine a builtin with `pushdef' and
`defn'.
File: m4.info, Node: Indir, Next: Builtin, Prev: Pushdef, Up: Definitions
4.7 Indirect call of macros
===========================
Any macro can be called indirectly with `indir':
-- Builtin: indir (NAME, ...)
Results in a call to the macro NAME, which is passed the rest of
the arguments. If NAME is not defined, an error message is
printed, and the expansion is void.
The macro `indir' is recognized only with parameters.
This can be used to call macros with "invalid" names (`define'
allows such names to be defined):
define(`$$internal$macro', `Internal macro (name `$0')')
=>
$$internal$macro
=>$$internal$macro
indir(`$$internal$macro')
=>Internal macro (name $$internal$macro)
The point is, here, that larger macro packages can have private
macros defined, that will not be called by accident. They can _only_ be
called through the builtin `indir'.
File: m4.info, Node: Builtin, Prev: Indir, Up: Definitions
4.8 Indirect call of builtins
=============================
Builtin macros can be called indirectly with `builtin':
-- Builtin: builtin (NAME, ...)
Results in a call to the builtin NAME, which is passed the rest of
the arguments. If NAME does not name a builtin, an error message
is printed, and the expansion is void.
The macro `builtin' is recognized only with parameters.
This can be used even if NAME has been given another definition that
has covered the original, or been undefined so that no macro maps to
the builtin.
pushdef(`define', `hidden')
=>
undefine(`undefine')
=>
define(`foo', `bar')
=>hidden
foo
=>foo
builtin(`define', `foo', `BAR')
=>
foo
=>BAR
undefine(`foo')
=>undefine(foo)
foo
=>BAR
builtin(`undefine', `foo')
=>
foo
=>foo
Note that this can be used to invoke builtins without arguments, even
when they normally require parameters to be recognized; but it will
provoke a warning, and result in a void expansion.
builtin
=>builtin
builtin()
error-->m4:stdin:2: undefined builtin `'
=>
builtin(`builtin')
error-->m4:stdin:3: Warning: too few arguments to builtin `builtin'
=>
builtin(`builtin',)
error-->m4:stdin:4: undefined builtin `'
=>
File: m4.info, Node: Conditionals, Next: Debugging, Prev: Definitions, Up: Top
5 Conditionals, loops, and recursion
************************************
Macros, expanding to plain text, perhaps with arguments, are not quite
enough. We would like to have macros expand to different things, based
on decisions taken at run-time. For that, we need some kind of
conditionals. Also, we would like to have some kind of loop construct,
so we could do something a number of times, or while some condition is
true.
* Menu:
* Ifdef:: Testing if a macro is defined
* Ifelse:: If-else construct, or multibranch
* Loops:: Loops and recursion in m4
File: m4.info, Node: Ifdef, Next: Ifelse, Up: Conditionals
5.1 Testing macro definitions
=============================
There are two different builtin conditionals in `m4'. The first is
`ifdef':
-- Builtin: ifdef (NAME, STRING-1, [STRING-2])
If NAME is defined as a macro, `ifdef' expands to STRING-1,
otherwise to STRING-2. If STRING-2 is omitted, it is taken to be
the empty string (according to the normal rules).
The macro `ifdef' is recognized only with parameters.
ifdef(`foo', ``foo' is defined', ``foo' is not defined')
=>foo is not defined
define(`foo', `')
=>
ifdef(`foo', ``foo' is defined', ``foo' is not defined')
=>foo is defined
ifdef(`no_such_macro', `yes', `no', `extra argument')
error-->m4:stdin:4: Warning: excess arguments to builtin `ifdef' ignored
=>no
File: m4.info, Node: Ifelse, Next: Loops, Prev: Ifdef, Up: Conditionals
5.2 Comparing strings
=====================
The other conditional, `ifelse', is much more powerful. It can be used
as a way to introduce a long comment, as an if-else construct, or as a
multibranch, depending on the number of arguments supplied:
-- Builtin: ifelse (COMMENT)
-- Builtin: ifelse (STRING-1, STRING-2, EQUAL, [NOT-EQUAL])
-- Builtin: ifelse (STRING-1, STRING-2, EQUAL-1, STRING-3, STRING-4,
EQUAL-2, ...)
Used with only one argument, the `ifelse' simply discards it and
produces no output.
If called with three or four arguments, `ifelse' expands into
EQUAL, if STRING-1 and STRING-2 are equal (character for
character), otherwise it expands to NOT-EQUAL.
If called with six or more arguments, and STRING-1 and STRING-2
are equal, `ifelse' expands into EQUAL, otherwise the first three
arguments are discarded and the processing starts again.
The macro `ifelse' is recognized only with parameters.
Using only one argument is a common `m4' idiom for introducing a
block comment, as an alternative to repeatedly using `dnl'. This
special usage is recognized by GNU `m4', so that in this case, the
warning about missing arguments is never triggered.
ifelse(`some comments')
=>
ifelse(`foo', `bar')
error-->m4:stdin:2: Warning: too few arguments to builtin `ifelse'
=>
Using three or four arguments provides decision points.
ifelse(`foo', `bar', `true')
=>
ifelse(`foo', `foo', `true')
=>true
define(`foo', `bar')
=>
ifelse(foo, `bar', `true', `false')
=>true
ifelse(foo, `foo', `true', `false')
=>false
Notice how the first argument was used unquoted; it is common to
compare the expansion of a macro with a string. With this macro, you
can now reproduce the behavior of many of the builtins, where the macro
is recognized only with arguments.
define(`foo', `ifelse(`$#', `0', ``$0'', `arguments:$#')')
=>
foo
=>foo
foo()
=>arguments:1
foo(`a', `b', `c')
=>arguments:3
However, `ifelse' can take more than four arguments. If given more
than four arguments, `ifelse' works like a `case' or `switch' statement
in traditional programming languages. If STRING-1 and STRING-2 are
equal, `ifelse' expands into EQUAL-1, otherwise the procedure is
repeated with the first three arguments discarded. This calls for an
example:
ifelse(`foo', `bar', `third', `gnu', `gnats', `sixth', `seventh')
=>seventh
Naturally, the normal case will be slightly more advanced than these
examples. A common use of `ifelse' is in macros implementing loops of
various kinds.
File: m4.info, Node: Loops, Prev: Ifelse, Up: Conditionals
5.3 Loops and recursion
=======================
There is no direct support for loops in `m4', but macros can be
recursive. There is no limit on the number of recursion levels, other
than those enforced by your hardware and operating system.
Loops can be programmed using recursion and the conditionals
described previously.
There is a builtin macro, `shift', which can, among other things, be
used for iterating through the actual arguments to a macro:
-- Builtin: shift (...)
Takes any number of arguments, and expands to all but the first
argument, separated by commas, with each argument quoted.
The macro `shift' is recognized only with parameters.
shift
=>shift
shift(`bar')
=>
shift(`foo', `bar', `baz')
=>bar,baz
An example of the use of `shift' is this macro:
-- Composite: reverse (...)
Takes any number of arguments, and reverse their order.
It is implemented as:
define(`reverse', `ifelse(`$#', `0', , `$#', `1', ``$1'',
`reverse(shift($@)), `$1'')')
=>
reverse
=>
reverse(`foo')
=>foo
reverse(`foo', `bar', `gnats', `and gnus')
=>and gnus, gnats, bar, foo
While not a very interesting macro, it does show how simple loops
can be made with `shift', `ifelse' and recursion.
Here is an example of a loop macro that implements a simple for loop.
-- Composite: forloop (ITERATOR, START, END, TEXT)
Takes the name in ITERATOR, which must be a valid macro name, and
successively assign it each integer value from START to END,
inclusive. For each assignment to ITERATOR, append TEXT to the
expansion of the `forloop'. TEXT may refer to ITERATOR. Any
definition of ITERATOR prior to this invocation is restored.
It can, for example, be used for simple counting:
include(`forloop.m4')
=>
forloop(`i', `1', `8', `i ')
=>1 2 3 4 5 6 7 8
For-loops can be nested, like:
include(`forloop.m4')
=>
forloop(`i', `1', `4', `forloop(`j', `1', `8', ` (i, j)')
')
=> (1, 1) (1, 2) (1, 3) (1, 4) (1, 5) (1, 6) (1, 7) (1, 8)
=> (2, 1) (2, 2) (2, 3) (2, 4) (2, 5) (2, 6) (2, 7) (2, 8)
=> (3, 1) (3, 2) (3, 3) (3, 4) (3, 5) (3, 6) (3, 7) (3, 8)
=> (4, 1) (4, 2) (4, 3) (4, 4) (4, 5) (4, 6) (4, 7) (4, 8)
=>
The implementation of the `forloop' macro is fairly straightforward.
The `forloop' macro itself is simply a wrapper, which saves the
previous definition of the first argument, calls the internal macro
`_forloop', and re-establishes the saved definition of the first
argument.
The macro `_forloop' expands the fourth argument once, and tests to
see if it is finished. If it has not finished, it increments the
iteration variable (using the predefined macro `incr', *note Incr::),
and recurses.
Here is the actual implementation of `forloop', distributed as
`examples/forloop.m4' in this package:
undivert(`forloop.m4')
=>divert(`-1')
=># forloop(var, from, to, stmt)
=>define(`forloop',
=> `pushdef(`$1', `$2')_forloop(`$1', `$2', `$3', `$4')popdef(`$1')')
=>define(`_forloop',
=> `$4`'ifelse($1, `$3', ,
=> `define(`$1', incr($1))_forloop(`$1', `$2', `$3', `$4')')')
=>divert`'dnl
=>
Notice the careful use of quotes. Only three macro arguments are
unquoted, each for its own reason. Try to find out _why_ these three
arguments are left unquoted, and see what happens if they are quoted.
Now, even though these two macros are useful, they are still not
robust enough for general use. They lack even basic error handling of
cases like start value less than final value, and the first argument
not being a name. Correcting these errors are left as an exercise to
the reader.
File: m4.info, Node: Debugging, Next: Input Control, Prev: Conditionals, Up: Top
6 How to debug macros and input
*******************************
When writing macros for `m4', they often do not work as intended on the
first try (as is the case with most programming languages).
Fortunately, there is support for macro debugging in `m4'.
* Menu:
* Dumpdef:: Displaying macro definitions
* Trace:: Tracing macro calls
* Debug Levels:: Controlling debugging output
* Debug Output:: Saving debugging output
File: m4.info, Node: Dumpdef, Next: Trace, Up: Debugging
6.1 Displaying macro definitions
================================
If you want to see what a name expands into, you can use the builtin
`dumpdef':
-- Builtin: dumpdef (...)
Accepts any number of arguments. If called without any arguments,
it displays the definitions of all known names, otherwise it
displays the definitions of the names given. The output is
printed to the current debug file (usually standard error), and is
sorted by name. If an unknown name is encountered, a warning is
printed.
The expansion of `dumpdef' is void.
define(`foo', `Hello world.')
=>
dumpdef(`foo')
error-->foo: `Hello world.'
=>
dumpdef(`define')
error-->define: <define>
=>
The last example shows how builtin macros definitions are displayed.
The definition that is dumped corresponds to what would occur if the
macro were to be called at that point, even if other definitions are
still live due to redefining a macro during argument collection.
pushdef(`f', ``$0'1')pushdef(`f', ``$0'2')
=>
f(popdef(`f')dumpdef(`f'))
error-->f: ``$0'1'
=>f2
f(popdef(`f')dumpdef(`f'))
error-->m4:stdin:3: undefined macro `f'
=>f1
*Note Debug Levels::, for information on controlling the details of
the display.
File: m4.info, Node: Trace, Next: Debug Levels, Prev: Dumpdef, Up: Debugging
6.2 Tracing macro calls
=======================
It is possible to trace macro calls and expansions through the builtins
`traceon' and `traceoff':
-- Builtin: traceon (...)
-- Builtin: traceoff (...)
When called without any arguments, `traceon' and `traceoff' will
turn tracing on and off, respectively, for all defined macros.
When called with arguments, only the named macros are affected,
whether or not they are currently defined.
The expansion of `traceon' and `traceoff' is void.
Whenever a traced macro is called and the arguments have been
collected, the call is displayed. If the expansion of the macro call
is not void, the expansion can be displayed after the call. The output
is printed to the current debug file (usually standard error).
define(`foo', `Hello World.')
=>
define(`echo', `$@')
=>
traceon(`foo', `echo')
=>
foo
error-->m4trace: -1- foo -> `Hello World.'
=>Hello World.
echo(gnus, and gnats)
error-->m4trace: -1- echo(`gnus', `and gnats') -> ``gnus',`and gnats''
=>gnus,and gnats
The number between dashes is the depth of the expansion. It is one
most of the time, signifying an expansion at the outermost level, but it
increases when macro arguments contain unquoted macro calls. The
maximum number that will appear between dashes is controlled by the
option `--nesting-limit' (*note Invoking m4::).
Tracing by name is an attribute that is preserved whether the macro
is defined or not. This allows the `-t' option to select macros to
trace before those macros are defined.
traceoff(`foo')
=>
traceon(`foo')
=>
foo
=>foo
define(`foo', `bar')
=>
foo
error-->m4trace: -1- foo -> `bar'
=>bar
undefine(`foo')
=>
ifdef(`foo', `yes', `no')
=>no
indir(`foo')
error-->m4:stdin:8: undefined macro `foo'
=>
define(`foo', `blah')
=>
foo
error-->m4trace: -1- foo -> `blah'
=>blah
traceoff
=>
foo
=>blah
Tracing even works on builtins. However, `defn' (*note Defn::) does
not transfer tracing status.
traceon(`eval', `m4_divnum')
=>
define(`m4_eval', defn(`eval'))
=>
define(`m4_divnum', defn(`divnum'))
=>
eval(divnum)
error-->m4trace: -1- eval(`0') -> `0'
=>0
m4_eval(m4_divnum)
error-->m4trace: -2- m4_divnum -> `0'
=>0
*Note Debug Levels::, for information on controlling the details of
the display.
File: m4.info, Node: Debug Levels, Next: Debug Output, Prev: Trace, Up: Debugging
6.3 Controlling debugging output
================================
The `-d' option to `m4' (*note Invoking m4::) controls the amount of
details presented, when using the macros described in the preceding
sections.
The FLAGS following the option can be one or more of the following:
`a'
Show the actual arguments in each macro call. This applies to all
macro calls if the `t' flag is used, otherwise only the macros
covered by calls of `traceon'.
`c'
Show several trace lines for each macro call. A line is shown
when the macro is seen, but before the arguments are collected; a
second line when the arguments have been collected and a third
line after the call has completed.
`e'
Show the expansion of each macro call, if it is not void. This
applies to all macro calls if the `t' flag is used, otherwise only
the macros covered by calls of `traceon'.
`f'
Show the name of the current input file in each trace output line.
`i'
Print a message each time the current input file is changed,
giving file name and input line number.
`l'
Show the current input line number in each trace output line.
`p'
Print a message when a named file is found through the path search
mechanism (*note Search Path::), giving the actual file name used.
`q'
Quote actual arguments and macro expansions in the display with the
current quotes.
`t'
Trace all macro calls made in this invocation of `m4'.
`x'
Add a unique `macro call id' to each line of the trace output.
This is useful in connection with the `c' flag above.
`V'
A shorthand for all of the above flags.
If no flags are specified with the `-d' option, the default is
`aeq'. The examples throughout this manual assume the default flags.
There is a builtin macro `debugmode', which allows on-the-fly
control of the debugging output format:
-- Builtin: debugmode ([FLAGS])
The argument FLAGS should be a subset of the letters listed above.
As special cases, if the argument starts with a `+', the flags are
added to the current debug flags, and if it starts with a `-', they
are removed. If no argument is present, all debugging flags are
cleared (as if no `-d' was given), and with an empty argument the
flags are reset to the default of `aeq'.
The expansion of `debugmode' is void.
define(`foo', `FOO')
=>
traceon(`foo')
=>
debugmode()
=>
foo
error-->m4trace: -1- foo -> `FOO'
=>FOO
debugmode
=>
foo
error-->m4trace: -1- foo
=>FOO
debugmode(`+l')
=>
foo
error-->m4trace:8: -1- foo
=>FOO
File: m4.info, Node: Debug Output, Prev: Debug Levels, Up: Debugging
6.4 Saving debugging output
===========================
Debug and tracing output can be redirected to files using either the
`-o' option to `m4' (*note Invoking m4::), or with the builtin macro
`debugfile':
-- Builtin: debugfile ([FILE])
Sends all further debug and trace output to FILE. If FILE is
empty, debug and trace output are discarded. If `debugfile' is
called without any arguments, debug and trace output are sent to
standard error. This does not affect warnings, error messages, or
`errprint' output, which are always sent to standard error. If
FILE cannot be opened, the current debug file is unchanged.
The expansion of `debugfile' is void.
traceon(`divnum')
=>
divnum(`extra')
error-->m4:stdin:2: Warning: excess arguments to builtin `divnum' ignored
error-->m4trace: -1- divnum(`extra') -> `0'
=>0
debugfile()
=>
divnum(`extra')
error-->m4:stdin:4: Warning: excess arguments to builtin `divnum' ignored
=>0
debugfile
=>
divnum
error-->m4trace: -1- divnum -> `0'
=>0
File: m4.info, Node: Input Control, Next: File Inclusion, Prev: Debugging, Up: Top
7 Input control
***************
This chapter describes various builtin macros for controlling the input
to `m4'.
* Menu:
* Dnl:: Deleting whitespace in input
* Changequote:: Changing the quote characters
* Changecom:: Changing the comment delimiters
* Changeword:: Changing the lexical structure of words
* M4wrap:: Saving input until end of input
File: m4.info, Node: Dnl, Next: Changequote, Up: Input Control
7.1 Deleting whitespace in input
================================
The builtin `dnl' stands for "Discard to Next Line":
-- Builtin: dnl
All characters, up to and including the next newline, are discarded
without performing any macro expansion.
The expansion of `dnl' is void.
It is often used in connection with `define', to remove the newline
that follows the call to `define'. Thus
define(`foo', `Macro `foo'.')dnl A very simple macro, indeed.
foo
=>Macro foo.
The input up to and including the next newline is discarded, as
opposed to the way comments are treated (*note Comments::).
Usually, `dnl' is immediately followed by an end of line or some
other whitespace. GNU `m4' will produce a warning diagnostic if `dnl'
is followed by an open parenthesis. In this case, `dnl' will collect
and process all arguments, looking for a matching close parenthesis.
All predictable side effects resulting from this collection will take
place. `dnl' will return no output. The input following the matching
close parenthesis up to and including the next newline, on whatever
line containing it, will still be discarded.
dnl(`args are ignored, but side effects occur',
define(`foo', `like this')) while this text is ignored: undefine(`foo')
error-->m4:stdin:2: Warning: excess arguments to builtin `dnl' ignored
See how `foo' was defined, foo?
=>See how foo was defined, like this?
If the end of file is encountered without a newline character, a
warning is issued and dnl stops consuming input.
define(`hi', `HI')
=>
m4wrap(`m4wrap(`2 hi
')0 hi dnl 1 hi')
=>
^D
error-->m4: Warning: end of file treated as newline
=>0 HI 2 HI
File: m4.info, Node: Changequote, Next: Changecom, Prev: Dnl, Up: Input Control
7.2 Changing the quote characters
=================================
The default quote delimiters can be changed with the builtin
`changequote':
-- Builtin: changequote ([START = ``'], [END = `''])
This sets START as the new begin-quote delimiter and END as the
new end-quote delimiter. If any of the arguments are missing, the
default quotes (``' and `'') are used instead of the void
arguments.
The expansion of `changequote' is void.
changequote(`[', `]')
=>
define([foo], [Macro [foo].])
=>
foo
=>Macro foo.
The quotation strings can safely contain eight-bit characters. If
no single character is appropriate, START and END can be of any length.
changequote(`[[[', `]]]')
=>
define([[[foo]]], [[[Macro [[[[[foo]]]]].]]])
=>
foo
=>Macro [[foo]].
Changing the quotes to the empty strings will effectively disable the
quoting mechanism, leaving no way to quote text.
define(`foo', `Macro `FOO'.')
=>
changequote(, )
=>
foo
=>Macro `FOO'.
`foo'
=>`Macro `FOO'.'
There is no way in `m4' to quote a string containing an unmatched
begin-quote, except using `changequote' to change the current quotes.
If the quotes should be changed from, say, `[' to `[[', temporary
quote characters have to be defined. To achieve this, two calls of
`changequote' must be made, one for the temporary quotes and one for
the new quotes.
Macros are recognized in preference to the begin-quote string, so if
a prefix of START can be recognized as a potential macro name, the
quoting mechanism is effectively disabled. Unless you use `changeword'
(*note Changeword::), this means that START should not begin with a
letter or `_' (underscore).
define(`hi', `HI')
=>
changequote(`q', `Q')
=>
q hi Q hi
=>q HI Q HI
changequote
=>
changequote(`-', `EOF')
=>
- hi EOF hi
=> hi HI
Quotes are recognized in preference to argument collection. In
particular, if START is a single `(', then argument collection is
effectively disabled. For portability with other implementations, it
is a good idea to avoid `(', `,', and `)' as the first character in
START.
define(`echo', `$#:$')
=>
define(`hi', `HI')
=>
changequote(`(',`)')
=>
echo(hi)
=>0::hi
changequote
=>
changequote(`((', `))')
=>
echo(hi)
=>1:HI:
echo((hi))
=>0::hi
changequote
=>
changequote(`,', `)')
=>
echo(hi,hi)bye)
=>1:HIhibye:
If END is a prefix of START, the end-quote will be recognized in
preference to a nested begin-quote. In particular, changing the quotes
to have the same string for START and END disables nesting of quotes.
When quote nesting is disabled, it is impossible to double-quote
strings across macro expansions, so using the same string is not done
very often.
define(`hi', `HI')
=>
changequote(`""', `"')
=>
""hi"""hi"
=>hihi
""hi" ""hi"
=>hi hi
""hi"" "hi"
=>hi" "HI"
changequote
=>
`hi`hi'hi'
=>hi`hi'hi
changequote(`"', `"')
=>
"hi"hi"hi"
=>hiHIhi
It is an error if the end of file occurs within a quoted string.
`dangling quote
^D
error-->m4:stdin:1: ERROR: end of file in string
File: m4.info, Node: Changecom, Next: Changeword, Prev: Changequote, Up: Input Control
7.3 Changing comment delimiters
===============================
The default comment delimiters can be changed with the builtin macro
`changecom':
-- Builtin: changecom ([START], [END])
This sets START as the new begin-comment delimiter and END as the
new end-comment delimiter. If only one argument is provided,
newline becomes the new end-comment delimiter. The comment
delimiters can be of any length. Omitting the first argument, or
using the empty string as the first argument, disables comments.
The expansion of `changecom' is void.
define(`comment', `COMMENT')
=>
# A normal comment
=># A normal comment
changecom(`/*', `*/')
=>
# Not a comment anymore
=># Not a COMMENT anymore
But: /* this is a comment now */ while this is not a comment
=>But: /* this is a comment now */ while this is not a COMMENT
Note how comments are copied to the output, much as if they were
quoted strings. If you want the text inside a comment expanded, quote
the begin-comment delimiter.
Calling `changecom' without any arguments, or with an empty string
for the first argument, disables the commenting mechanism completely.
To restore the original comment start of `#', you must explicitly ask
for it.
define(`comment', `COMMENT')
=>
changecom
=>
# Not a comment anymore
=># Not a COMMENT anymore
changecom(`#')
=>
# comment again
=># comment again
The comment strings can safely contain eight-bit characters.
Comments are recognized in preference to macros. However, this is
not compatible with other implementations, where macros and even quoting
takes precedence over comments, so it may change in a future release.
For portability, this means that START should not begin with a letter
or `_' (underscore), and that neither the start-quote nor the
start-comment string should be a prefix of the other.
define(`hi', `HI')
=>
changecom(`q', `Q')
=>
q hi Q hi
=>q hi Q HI
Comments are recognized in preference to argument collection. In
particular, if START is a single `(', then argument collection is
effectively disabled. For portability with other implementations, it
is a good idea to avoid `(', `,', and `)' as the first character in
START.
define(`echo', `$#:$')
=>
define(`hi', `HI')
=>
changecom(`(',`)')
=>
echo(hi)
=>0::(hi)
changecom
=>
changecom(`((', `))')
=>
echo(hi)
=>1:HI:
echo((hi))
=>0::((hi))
changecom(`,', `)')
=>
echo(hi,hi)bye)
=>1:HI,hi)bye:
It is an error if the end of file occurs within a comment.
changecom(`/*', `*/')
=>
/*dangling comment
^D
error-->m4:stdin:1: ERROR: end of file in comment
File: m4.info, Node: Changeword, Next: M4wrap, Prev: Changecom, Up: Input Control
7.4 Changing the lexical structure of words
===========================================
The macro `changeword' and all associated functionality is
experimental. It is only available if the `--enable-changeword'
option was given to `configure', at GNU `m4' installation time.
The functionality will go away in the future, to be replaced by
other new features that are more efficient at providing the same
capabilities. _Do not rely on it_. Please direct your comments
about it the same way you would do for bugs.
A file being processed by `m4' is split into quoted strings, words
(potential macro names) and simple tokens (any other single character).
Initially a word is defined by the following regular expression:
[_a-zA-Z][_a-zA-Z0-9]*
Using `changeword', you can change this regular expression:
-- Optional builtin: changeword (REGEX)
Changes the regular expression for recognizing macro names to be
REGEX. If REGEX is empty, use `[_a-zA-Z][_a-zA-Z0-9]*'. REGEX
must obey the constraint that every prefix of the desired final
pattern is also accepted by the regular expression. If REGEX
contains grouping parentheses, the macro invoked is the portion
that matched the first group, rather than the entire matching
string.
The expansion of `changeword' is void. The macro `changeword' is
recognized only with parameters.
Relaxing the lexical rules of `m4' might be useful (for example) if
you wanted to apply translations to a file of numbers:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
changeword(`[_a-zA-Z0-9]+')
=>
define(`1', `0')1
=>0
Tightening the lexical rules is less useful, because it will
generally make some of the builtins unavailable. You could use it to
prevent accidental call of builtins, for example:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
define(`_indir', defn(`indir'))
=>
changeword(`_[_a-zA-Z0-9]*')
=>
esyscmd(`foo')
=>esyscmd(foo)
_indir(`esyscmd', `echo hi')
=>hi
=>
Because `m4' constructs its words a character at a time, there is a
restriction on the regular expressions that may be passed to
`changeword'. This is that if your regular expression accepts `foo',
it must also accept `f' and `fo'.
`changeword' has another function. If the regular expression
supplied contains any grouped subexpressions, then text outside the
first of these is discarded before symbol lookup. So:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
changecom(`/*', `*/')dnl
define(`foo', `bar')dnl
changeword(`#\([_a-zA-Z0-9]*\)')
=>
#esyscmd(`echo foo \#foo')
=>foo bar
=>
`m4' now requires a `#' mark at the beginning of every macro
invocation, so one can use `m4' to preprocess plain text without losing
various words like `divert'.
In `m4', macro substitution is based on text, while in TeX, it is
based on tokens. `changeword' can throw this difference into relief.
For example, here is the same idea represented in TeX and `m4'. First,
the TeX version:
\def\a{\message{Hello}}
\catcode`\@=0
\catcode`\\=12
@a
@bye
=>Hello
Then, the `m4' version:
ifdef(`changeword', `', `errprint(` skipping: no changeword support
')m4exit(`77')')dnl
define(`a', `errprint(`Hello')')dnl
changeword(`@\([_a-zA-Z0-9]*\)')
=>
@a
=>errprint(Hello)
In the TeX example, the first line defines a macro `a' to print the
message `Hello'. The second line defines <@> to be usable instead of
<\> as an escape character. The third line defines <\> to be a normal
printing character, not an escape. The fourth line invokes the macro
`a'. So, when TeX is run on this file, it displays the message `Hello'.
When the `m4' example is passed through `m4', it outputs
`errprint(Hello)'. The reason for this is that TeX does lexical
analysis of macro definition when the macro is _defined_. `m4' just
stores the text, postponing the lexical analysis until the macro is
_used_.
You should note that using `changeword' will slow `m4' down by a
factor of about seven, once it is changed to something other than the
default regular expression. You can invoke `changeword' with the empty
string to restore the default word definition, and regain the parsing
speed.
File: m4.info, Node: M4wrap, Prev: Changeword, Up: Input Control
7.5 Saving input
================
It is possible to `save' some text until the end of the normal input has
been seen. Text can be saved, to be read again by `m4' when the normal
input has been exhausted. This feature is normally used to initiate
cleanup actions before normal exit, e.g., deleting temporary files.
To save input text, use the builtin `m4wrap':
-- Builtin: m4wrap ([STRING], ...)
Stores STRING in a safe place, to be reread when end of input is
reached. As a GNU extension, additional arguments are
concatenated with a space to the STRING.
The expansion of `m4wrap' is void. The macro `m4wrap' is
recognized only with parameters.
define(`cleanup', `This is the `cleanup' action.
')
=>
m4wrap(`cleanup')
=>
This is the first and last normal input line.
=>This is the first and last normal input line.
^D
=>This is the cleanup action.
The saved input is only reread when the end of normal input is seen,
and not if `m4exit' is used to exit `m4'.
It is safe to call `m4wrap' from saved text, but then the order in
which the saved text is reread is undefined. If `m4wrap' is not used
recursively, the saved pieces of text are reread in the opposite order
in which they were saved (LIFO--last in, first out). However, this
behavior is likely to change in a future release, to match POSIX, so
you should not depend on this order.
Here is an example of implementing a factorial function using
`m4wrap':
define(`f', `ifelse(`$1', `0', `Answer: 0!=1
', eval(`$1>1'), `0', `Answer: $2$1=eval(`$2$1')
', `m4wrap(`f(decr(`$1'), `$2$1*')')')')
=>
f(`10')
=>
^D
=>Answer: 10*9*8*7*6*5*4*3*2*1=3628800
Invocations of `m4wrap' at the same recursion level are concatenated
and rescanned as usual:
define(`aa', `AA
')
=>
m4wrap(`a')m4wrap(`a')
=>
^D
=>AA
however, the transition between recursion levels behaves like an end of
file condition between two input files.
m4wrap(`m4wrap(`)')len(abc')
=>
^D
error-->m4: ERROR: end of file in argument list
File: m4.info, Node: File Inclusion, Next: Diversions, Prev: Input Control, Up: Top
8 File inclusion
****************
`m4' allows you to include named files at any point in the input.
* Menu:
* Include:: Including named files
* Search Path:: Searching for include files
File: m4.info, Node: Include, Next: Search Path, Up: File Inclusion
8.1 Including named files
=========================
There are two builtin macros in `m4' for including files:
-- Builtin: include (FILE)
-- Builtin: sinclude (FILE)
Both macros cause the file named FILE to be read by `m4'. When
the end of the file is reached, input is resumed from the previous
input file.
The expansion of `include' and `sinclude' is therefore the
contents of FILE.
If FILE does not exist (or cannot be read), the expansion is void,
and `include' will fail with an error while `sinclude' is silent.
The empty string counts as a file that does not exist.
The macros `include' and `sinclude' are recognized only with
parameters.
include(`none')
=>
error-->m4:stdin:1: cannot open `none': No such file or directory
include()
=>
error-->m4:stdin:2: cannot open `': No such file or directory
sinclude(`none')
=>
sinclude()
=>
The rest of this section assumes that `m4' is invoked with the `-I'
option (*note Invoking m4::) pointing to the `examples' directory
shipped as part of the GNU `m4' package. The file `examples/incl.m4'
in the distribution contains the lines:
Include file start
foo
Include file end
Normally file inclusion is used to insert the contents of a file
into the input stream. The contents of the file will be read by `m4'
and macro calls in the file will be expanded:
define(`foo', `FOO')
=>
include(`incl.m4')
=>Include file start
=>FOO
=>Include file end
=>
The fact that `include' and `sinclude' expand to the contents of the
file can be used to define macros that operate on entire files. Here
is an example, which defines `bar' to expand to the contents of
`incl.m4':
define(`bar', include(`incl.m4'))
=>
This is `bar': >>bar<<
=>This is bar: >>Include file start
=>foo
=>Include file end
=><<
This use of `include' is not trivial, though, as files can contain
quotes, commas, and parentheses, which can interfere with the way the
`m4' parser works. GNU `m4' seamlessly concatenates the file contents
with the next character, even if the included file ended in the middle
of a comment, string, or macro call. These conditions are only treated
as end of file errors if specified as input files on the command line.
File: m4.info, Node: Search Path, Prev: Include, Up: File Inclusion
8.2 Searching for include files
===============================
GNU `m4' allows included files to be found in other directories than
the current working directory.
If a file is not found in the current working directory, and the file
name is not absolute, the file will be looked for in a specified search
path. First, the directories specified with the `-I' option will be
searched, in the order found on the command line (*note Invoking m4::).
Second, if the `M4PATH' environment variable is set, it is expected to
contain a colon-separated list of directories, which will be searched
in order.
If the automatic search for include-files causes trouble, the `p'
debug flag (*note Debug Levels::) can help isolate the problem.
File: m4.info, Node: Diversions, Next: Text handling, Prev: File Inclusion, Up: Top
9 Diverting and undiverting output
**********************************
Diversions are a way of temporarily saving output. The output of `m4'
can at any time be diverted to a temporary file, and be reinserted into
the output stream, "undiverted", again at a later time.
Numbered diversions are counted from 0 upwards, diversion number 0
being the normal output stream. The number of simultaneous diversions
is limited mainly by the memory used to describe them, because GNU `m4'
tries to keep diversions in memory. However, there is a limit to the
overall memory usable by all diversions taken altogether (512K,
currently). When this maximum is about to be exceeded, a temporary
file is opened to receive the contents of the biggest diversion still
in memory, freeing this memory for other diversions. So, it is
theoretically possible that the number of diversions be limited by the
number of available file descriptors.
* Menu:
* Divert:: Diverting output
* Undivert:: Undiverting output
* Divnum:: Diversion numbers
* Cleardiv:: Discarding diverted text
File: m4.info, Node: Divert, Next: Undivert, Up: Diversions
9.1 Diverting output
====================
Output is diverted using `divert':
-- Builtin: divert ([NUMBER = `0'])
The current diversion is changed to NUMBER. If NUMBER is left out
or empty, it is assumed to be zero. If NUMBER cannot be parsed,
the diversion is unchanged.
The expansion of `divert' is void.
When all the `m4' input will have been processed, all existing
diversions are automatically undiverted, in numerical order.
divert(`1')
This text is diverted.
divert
=>
This text is not diverted.
=>This text is not diverted.
^D
=>
=>This text is diverted.
Several calls of `divert' with the same argument do not overwrite
the previous diverted text, but append to it. Diversions are printed
after any wrapped text is expanded.
define(`text', `TEXT')
=>
divert(`1')`diverted text.'
divert
=>
m4wrap(`Wrapped text preceeds ')
=>
^D
=>Wrapped TEXT preceeds diverted text.
If output is diverted to a non-existent diversion, it is simply
discarded. This can be used to suppress unwanted output. A common
example of unwanted output is the trailing newlines after macro
definitions. Here is how to avoid them.
divert(`-1')
define(`foo', `Macro `foo'.')
define(`bar', `Macro `bar'.')
divert
=>
This is a common programming idiom in `m4'.
Note that `divert' is an English word, but also an active macro
without arguments. When processing plain text, the word might appear in
normal text and be unintentionally swallowed as a macro invocation. One
way to avoid this is to use the `-P' option to rename all builtins
(*note Invoking m4::). Another is to write a wrapper that requires a
parameter to be recognized.
We decided to divert the stream for irrigation.
=>We decided to the stream for irrigation.
define(`divert', `ifelse(`$#', `0', ``$0'', `builtin(`$0', $@)')')
=>
divert(-1)
Ignored text.
divert(0)
=>
We decided to divert the stream for irrigation.
=>We decided to divert the stream for irrigation.
File: m4.info, Node: Undivert, Next: Divnum, Prev: Divert, Up: Diversions
9.2 Undiverting output
======================
Diverted text can be undiverted explicitly using the builtin `undivert':
-- Builtin: undivert ([NUMBER]...)
Undiverts the diversions given by the arguments, in the order
given. If no arguments are supplied, all diversions are
undiverted, in numerical order. As a GNU extension, if NUMBER is
not numeric, treat it as a file name instead.
The expansion of `undivert' is void.
divert(`1')
This text is diverted.
divert
=>
This text is not diverted.
=>This text is not diverted.
undivert(`1')
=>
=>This text is diverted.
=>
Notice the last two blank lines. One of them comes from the newline
following `undivert', the other from the newline that followed the
`divert'! A diversion often starts with a blank line like this.
When diverted text is undiverted, it is _not_ reread by `m4', but
rather copied directly to the current output, and it is therefore not
an error to undivert into a diversion. Undiverting the empty string is
the same as specifying diversion 0; in either case nothing happens
since the output has already been flushed.
divert(`1')diverted text
divert
=>
undivert()
=>
undivert(`0')
=>
undivert
=>diverted text
=>
When a diversion has been undiverted, the diverted text is discarded,
and it is not possible to bring back diverted text more than once.
divert(`1')
This text is diverted first.
divert(`0')undivert(`1')dnl
=>
=>This text is diverted first.
undivert(`1')
=>
divert(`1')
This text is also diverted but not appended.
divert(`0')undivert(`1')dnl
=>
=>This text is also diverted but not appended.
Attempts to undivert the current diversion are silently ignored.
Thus, when the current diversion is not 0, the current diversion does
not get rearranged among the other diversions.
divert(`1')one
divert(`2')two
divert(`3')three
divert(`2')undivert`'dnl
divert`'undivert`'dnl
=>two
=>one
=>three
GNU `m4' allows named files to be undiverted. Given a non-numeric
argument, the contents of the file named will be copied, uninterpreted,
to the current output. This complements the builtin `include' (*note
Include::). To illustrate the difference, the file `examples/foo'
contains the word `bar':
define(`bar', `BAR')
=>
undivert(`foo')
=>bar
=>
include(`foo')
=>BAR
=>
If the file is not found (or cannot be read), an error message is
issued, and the expansion is void.
File: m4.info, Node: Divnum, Next: Cleardiv, Prev: Undivert, Up: Diversions
9.3 Diversion numbers
=====================
The current diversion is tracked by the builtin `divnum':
-- Builtin: divnum
Expands to the number of the current diversion.
Initial divnum
=>Initial 0
divert(`1')
Diversion one: divnum
divert(`2')
Diversion two: divnum
^D
=>
=>Diversion one: 1
=>
=>Diversion two: 2
File: m4.info, Node: Cleardiv, Prev: Divnum, Up: Diversions
9.4 Discarding diverted text
============================
Often it is not known, when output is diverted, whether the diverted
text is actually needed. Since all non-empty diversion are brought back
on the main output stream when the end of input is seen, a method of
discarding a diversion is needed. If all diversions should be
discarded, the easiest is to end the input to `m4' with `divert(`-1')'
followed by an explicit `undivert':
divert(`1')
Diversion one: divnum
divert(`2')
Diversion two: divnum
divert(`-1')
undivert
^D
No output is produced at all.
Clearing selected diversions can be done with the following macro:
-- Composite: cleardivert ([DIVERSION]...)
Discard the contents of each listed diversion.
define(`cleardivert',
`pushdef(`_n', divnum)divert(`-1')undivert($@)divert(_n)popdef(`_n')')
=>
It is called just like `undivert', but the effect is to clear the
diversions, given by the arguments. (This macro has a nasty bug! You
should try to see if you can find it and correct it. *note Answers::)
File: m4.info, Node: Text handling, Next: Arithmetic, Prev: Diversions, Up: Top
10 Macros for text handling
***************************
There are a number of builtins in `m4' for manipulating text in various
ways, extracting substrings, searching, substituting, and so on.
* Menu:
* Len:: Calculating length of strings
* Index macro:: Searching for substrings
* Regexp:: Searching for regular expressions
* Substr:: Extracting substrings
* Translit:: Translating characters
* Patsubst:: Substituting text by regular expression
* Format:: Formatting strings (printf-like)
File: m4.info, Node: Len, Next: Index macro, Up: Text handling
10.1 Calculating length of strings
==================================
The length of a string can be calculated by `len':
-- Builtin: len (STRING)
Expands to the length of STRING, as a decimal number.
The macro `len' is recognized only with parameters.
len()
=>0
len(`abcdef')
=>6
File: m4.info, Node: Index macro, Next: Regexp, Prev: Len, Up: Text handling
10.2 Searching for substrings
=============================
Searching for substrings is done with `index':
-- Builtin: index (STRING, SUBSTRING)
Expands to the index of the first occurrence of SUBSTRING in
STRING. The first character in STRING has index 0. If SUBSTRING
does not occur in STRING, `index' expands to `-1'.
The macro `index' is recognized only with parameters.
index(`gnus, gnats, and armadillos', `nat')
=>7
index(`gnus, gnats, and armadillos', `dag')
=>-1
Omitting SUBSTRING evokes a warning, but still produces output.
index(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `index'
=>0
File: m4.info, Node: Regexp, Next: Substr, Prev: Index macro, Up: Text handling
10.3 Searching for regular expressions
======================================
Searching for regular expressions is done with the builtin `regexp':
-- Builtin: regexp (STRING, REGEXP, [REPLACEMENT])
Searches for REGEXP in STRING. The syntax for regular expressions
is the same as in GNU Emacs. *Note Syntax of Regular Expressions:
(emacs)Regexps.
If REPLACEMENT is omitted, `regexp' expands to the index of the
first match of REGEXP in STRING. If REGEXP does not match
anywhere in STRING, it expands to -1.
If REPLACEMENT is supplied, and there was a match, `regexp'
changes the expansion to this argument, with `\N' substituted by
the text matched by the Nth parenthesized sub-expression of
REGEXP, up to nine sub-expressions. The escape `\&' is replaced
by the text of the entire regular expression matched. For all
other characters, `\' treats the next character literally. A
warning is issued if there were fewer sub-expressions than the
`\N' requested, or if there is a trailing `\'. If there was no
match, `regexp' expands to the empty string.
The macro `regexp' is recognized only with parameters.
regexp(`GNUs not Unix', `\<[a-z]\w+')
=>5
regexp(`GNUs not Unix', `\<Q\w*')
=>-1
regexp(`GNUs not Unix', `\w\(\w+\)$', `*** \& *** \1 ***')
=>*** Unix *** nix ***
regexp(`GNUs not Unix', `\<Q\w*', `*** \& *** \1 ***')
=>
Here are some more examples on the handling of backslash:
regexp(`abc', `\(b\)', `\\\10\a')
=>\b0a
regexp(`abc', `b', `\1\')
error-->m4:stdin:2: Warning: sub-expression 1 not present
error-->m4:stdin:2: Warning: trailing \ ignored in replacement
=>
regexp(`abc', `\(\(d\)?\)\(c\)', `\1\2\3\4\5\6')
error-->m4:stdin:3: Warning: sub-expression 4 not present
error-->m4:stdin:3: Warning: sub-expression 5 not present
error-->m4:stdin:3: Warning: sub-expression 6 not present
=>c
Omitting REGEXP evokes a warning, but still produces output.
regexp(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `regexp'
=>0
File: m4.info, Node: Substr, Next: Translit, Prev: Regexp, Up: Text handling
10.4 Extracting substrings
==========================
Substrings are extracted with `substr':
-- Builtin: substr (STRING, FROM, [LENGTH])
Expands to the substring of STRING, which starts at index FROM,
and extends for LENGTH characters, or to the end of STRING, if
LENGTH is omitted. The starting index of a string is always 0.
The expansion is empty if there is an error parsing FROM or
LENGTH, if FROM is beyond the end of STRING, or if LENGTH is
negative.
The macro `substr' is recognized only with parameters.
substr(`gnus, gnats, and armadillos', `6')
=>gnats, and armadillos
substr(`gnus, gnats, and armadillos', `6', `5')
=>gnats
Omitting FROM evokes a warning, but still produces output.
substr(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `substr'
=>abc
substr(`abc',)
error-->m4:stdin:2: empty string treated as 0 in builtin `substr'
=>abc
File: m4.info, Node: Translit, Next: Patsubst, Prev: Substr, Up: Text handling
10.5 Translating characters
===========================
Character translation is done with `translit':
-- Builtin: translit (STRING, CHARS, [REPLACEMENT])
Expands to STRING, with each character that occurs in CHARS
translated into the character from REPLACEMENT with the same index.
If REPLACEMENT is shorter than CHARS, the excess characters are
deleted from the expansion. If REPLACEMENT is omitted, all
characters in STRING that are present in CHARS are deleted from
the expansion.
As a GNU extension, both CHARS and REPLACEMENT can contain
character-ranges, e.g., `a-z' (meaning all lowercase letters) or
`0-9' (meaning all digits). To include a dash `-' in CHARS or
REPLACEMENT, place it first or last.
It is not an error for the last character in the range to be
`larger' than the first. In that case, the range runs backwards,
i.e., `9-0' means the string `9876543210'.
The macro `translit' is recognized only with parameters.
translit(`GNUs not Unix', `A-Z')
=>s not nix
translit(`GNUs not Unix', `a-z', `A-Z')
=>GNUS NOT UNIX
translit(`GNUs not Unix', `A-Z', `z-a')
=>tmfs not fnix
The first example deletes all uppercase letters, the second converts
lowercase to uppercase, and the third `mirrors' all uppercase letters,
while converting them to lowercase. The two first cases are by far the
most common.
Omitting CHARS evokes a warning, but still produces output.
translit(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `translit'
=>abc
File: m4.info, Node: Patsubst, Next: Format, Prev: Translit, Up: Text handling
10.6 Substituting text by regular expression
============================================
Global substitution in a string is done by `patsubst':
-- Builtin: patsubst (STRING, REGEXP, [REPLACEMENT])
Searches STRING for matches of REGEXP, and substitutes REPLACEMENT
for each match. The syntax for regular expressions is the same as
in GNU Emacs (*note Regexp::).
The parts of STRING that are not covered by any match of REGEXP
are copied to the expansion. Whenever a match is found, the
search proceeds from the end of the match, so a character from
STRING will never be substituted twice. If REGEXP matches a
string of zero length, the start position for the search is
incremented, to avoid infinite loops.
When a replacement is to be made, REPLACEMENT is inserted into the
expansion, with `\N' substituted by the text matched by the Nth
parenthesized sub-expression of PATSUBST, for up to nine
sub-expressions. The escape `\&' is replaced by the text of the
entire regular expression matched. For all other characters, `\'
treats the next character literally. A warning is issued if there
were fewer sub-expressions than the `\N' requested, or if there is
a trailing `\'.
The REPLACEMENT argument can be omitted, in which case the text
matched by REGEXP is deleted.
The macro `patsubst' is recognized only with parameters.
patsubst(`GNUs not Unix', `^', `OBS: ')
=>OBS: GNUs not Unix
patsubst(`GNUs not Unix', `\<', `OBS: ')
=>OBS: GNUs OBS: not OBS: Unix
patsubst(`GNUs not Unix', `\w*', `(\&)')
=>(GNUs)() (not)() (Unix)()
patsubst(`GNUs not Unix', `\w+', `(\&)')
=>(GNUs) (not) (Unix)
patsubst(`GNUs not Unix', `[A-Z][a-z]+')
=>GN not patsubst(`GNUs not Unix', `not', `NOT\')
error-->m4:stdin:6: Warning: trailing \ ignored in replacement
=>GNUs NOT Unix
Here is a slightly more realistic example, which capitalizes
individual word or whole sentences, by substituting calls of the macros
`upcase' and `downcase' into the strings.
-- Composite: upcase (TEXT)
-- Composite: downcase (TEXT)
-- Composite: capitalize (TEXT)
Expand to TEXT, but with capitalization changed: `upcase' changes
all letters to upper case, `downcase' changes all letters to lower
case, and `capitalize' changes the first character of each word to
upper case and the remaining characters to lower case.
define(`upcase', `translit(`$*', `a-z', `A-Z')')dnl
define(`downcase', `translit(`$*', `A-Z', `a-z')')dnl
define(`capitalize1',
`regexp(`$1', `^\(\w\)\(\w*\)',
`upcase(`\1')`'downcase(`\2')')')dnl
define(`capitalize',
`patsubst(`$1', `\w+', `capitalize1(`\&')')')dnl
capitalize(`GNUs not Unix')
=>Gnus Not Unix
While `regexp' replaces the whole input with the replacement as soon
as there is a match, `patsubst' replaces each _occurrence_ of a match
and preserves non-matching pieces:
define(`patreg',
`patsubst($@)
regexp($@)')dnl
patreg(`bar foo baz Foo', `foo\|Foo', `FOO')
=>bar FOO baz FOO
=>FOO
patreg(`aba abb 121', `\(.\)\(.\)\1', `\2\1\2')
=>bab abb 212
=>bab
Omitting REGEXP evokes a warning, but still produces output.
patsubst(`abc')
error-->m4:stdin:1: Warning: too few arguments to builtin `patsubst'
=>abc
File: m4.info, Node: Format, Prev: Patsubst, Up: Text handling
10.7 Formatted output
=====================
Formatted output can be made with `format':
-- Builtin: format (FORMAT-STRING, ...)
Works much like the C function `printf'. The first argument
FORMAT-STRING can contain `%' specifications which are satisfied
by additional arguments, and the expansion of `format' is the
formatted string.
The macro `format' is recognized only with parameters.
Its use is best described by a few examples:
define(`foo', `The brown fox jumped over the lazy dog')
=>
format(`The string "%s" uses %d characters', foo, len(foo))
=>The string "The brown fox jumped over the lazy dog" uses 38 characters
format(`%.0f', `56789.9876')
=>56790
len(format(`%-*X', `300', `1'))
=>300
Using the `forloop' macro defined in *Note Loops::, this example
shows how `format' can be used to produce tabular output.
include(`forloop.m4')
=>
forloop(`i', `1', `10', `format(`%6d squared is %10d
', i, eval(i**2))')
=> 1 squared is 1
=> 2 squared is 4
=> 3 squared is 9
=> 4 squared is 16
=> 5 squared is 25
=> 6 squared is 36
=> 7 squared is 49
=> 8 squared is 64
=> 9 squared is 81
=> 10 squared is 100
=>
The builtin `format' is modeled after the ANSI C `printf' function,
and supports these `%' specifiers: `c', `s', `d', `o', `x', `X', `u',
`e', `E', `f', `F', `g', `G', and `%'; it supports field widths and
precisions, and the modifiers `+', `-', ` ', `0', `#', `h' and `l'.
For more details on the functioning of `printf', see the C Library
Manual.
For now, unrecognized specifiers are silently ignored, but it is
anticipated that a future release of GNU `m4' will support more
specifiers, and give warnings when problems are encountered. Likewise,
escape sequences are not yet recognized.
File: m4.info, Node: Arithmetic, Next: Shell commands, Prev: Text handling, Up: Top
11 Macros for doing arithmetic
******************************
Integer arithmetic is included in `m4', with a C-like syntax. As
convenient shorthands, there are builtins for simple increment and
decrement operations.
* Menu:
* Incr:: Decrement and increment operators
* Eval:: Evaluating integer expressions
File: m4.info, Node: Incr, Next: Eval, Up: Arithmetic
11.1 Decrement and increment operators
======================================
Increment and decrement of integers are supported using the builtins
`incr' and `decr':
-- Builtin: incr (NUMBER)
-- Builtin: decr (NUMBER)
Expand to the numerical value of NUMBER, incremented or
decremented, respectively, by one. Except for the empty string,
the expansion is empty if NUMBER could not be parsed.
The macros `incr' and `decr' are recognized only with parameters.
incr(`4')
=>5
decr(`7')
=>6
incr()
error-->m4:stdin:3: empty string treated as 0 in builtin `incr'
=>1
decr()
error-->m4:stdin:4: empty string treated as 0 in builtin `decr'
=>-1
File: m4.info, Node: Eval, Prev: Incr, Up: Arithmetic
11.2 Evaluating integer expressions
===================================
Integer expressions are evaluated with `eval':
-- Builtin: eval (EXPRESSION, [RADIX = `10'], [WIDTH])
Expands to the value of EXPRESSION. The expansion is empty if an
error is encountered while parsing the arguments. If specified,
RADIX and WIDTH control the format of the output.
The macro `eval' is recognized only with parameters.
Expressions can contain the following operators, listed in order of
decreasing precedence.
`+ -'
Unary plus and minus
`**'
Exponentiation
`* / %'
Multiplication, division and modulo
`+ -'
Addition and subtraction
`<< >>'
Shift left or right
`== != > >= < <='
Relational operators
`!'
Logical negation
`~'
Bitwise negation
`&'
Bitwise and
`^'
Bitwise exclusive-or
`|'
Bitwise or
`&&'
Logical and
`||'
Logical or
All operators, except exponentiation, are left associative.
Note that some older `m4' implementations use `^' as an alternate
operator for exponentiation, although POSIX requires the C behavior of
bitwise exclusive-or. On the other hand, the precedence of `~' and `!'
are different in GNU `m4' than they are in C, matching the precedence
in traditional `m4' implementations. This behavior is likely to change
in a future version to match POSIX, so use parentheses to force the
desired precedence.
Within EXPRESSION, (but not RADIX or WIDTH), numbers without a
special prefix are decimal. A simple `0' prefix introduces an octal
number. `0x' introduces a hexadecimal number. `0b' introduces a
binary number. `0r' introduces a number expressed in any radix between
1 and 36: the prefix should be immediately followed by the decimal
expression of the radix, a colon, then the digits making the number.
For radix 1, leading zeros are ignored and all remaining digits must be
`1'; for all other radices, the digits are `0', `1', `2', .... Beyond
`9', the digits are `a', `b' ... up to `z'. Lower and upper case
letters can be used interchangeably in numbers prefixes and as number
digits.
Parentheses may be used to group subexpressions whenever needed.
For the relational operators, a true relation returns `1', and a false
relation return `0'.
Here are a few examples of use of `eval'.
eval(`-3 * 5')
=>-15
eval(index(`Hello world', `llo') >= 0)
=>1
eval(`0r1:0111 + 0b100 + 0r3:12')
=>12
define(`square', `eval(`('$1`)**2')')
=>
square(`9')
=>81
square(square(`5')`+1')
=>676
define(`foo', `666')
=>
eval(`foo/6')
error-->m4:stdin:8: bad expression in eval: foo/6
=>
eval(foo/6)
=>111
As the last two lines show, `eval' does not handle macro names, even
if they expand to a valid expression (or part of a valid expression).
Therefore all macros must be expanded before they are passed to `eval'.
All evaluation is done with 32-bit signed integers, assuming
2's-complement with wrap-around. The shift operators are defined in GNU
`m4' by doing an implicit bit-wise and of the right-hand operand with
0x1f, and sign-extension with right shift.
eval(0x80000000 / -1)
=>-2147483648
eval(0x80000000 % -1)
=>0
eval(0x7fffffff)
=>2147483647
incr(eval(0x7fffffff))
=>-2147483648
eval(-4 >> 33)
=>-2
If RADIX is specified, it specifies the radix to be used in the
expansion. The default radix is 10; this is also the case if RADIX is
the empty string. It is an error if the radix is outside the range of
1 through 36, inclusive. The result of `eval' is always taken to be
signed. No radix prefix is output, and for radices greater than 10,
the digits are lower case. The WIDTH argument specifies the minimum
output width, excluding any negative sign. The result is zero-padded
to extend the expansion to the requested width. It is an error if the
width is negative. On error, the expansion of `eval' is empty.
eval(`666', `10')
=>666
eval(`666', `11')
=>556
eval(`666', `6')
=>3030
eval(`666', `6', `10')
=>0000003030
eval(`-666', `6', `10')
=>-0000003030
eval(`10', `', `0')
=>10
`0r1:'eval(`10', `1', `11')
=>0r1:01111111111
eval(`10', `16')
=>a
File: m4.info, Node: Shell commands, Next: Miscellaneous, Prev: Arithmetic, Up: Top
12 Running shell commands
*************************
There are a few builtin macros in `m4' that allow you to run shell
commands from within `m4'.
Note that the definition of a valid shell command is system
dependent. On UNIX systems, this is the typical `/bin/sh'. But on
other systems, such as native Windows, the shell has a different syntax
of commands that it understands. Some examples in this chapter assume
`/bin/sh', and also demonstrate how to quit early with a known exit
value if this is not the case.
* Menu:
* Platform macros:: Determining the platform
* Syscmd:: Executing simple commands
* Esyscmd:: Reading the output of commands
* Sysval:: Exit status
* Maketemp:: Making names for temporary files
File: m4.info, Node: Platform macros, Next: Syscmd, Up: Shell commands
12.1 Determining the platform
=============================
Sometimes it is desirable for an input file to know which platform `m4'
is running on. GNU `m4' provides several macros that are predefined to
expand to the empty string; checking for their existence will confirm
platform details.
-- Optional builtin: __gnu__
-- Optional builtin: __os2__
-- Optional builtin: os2
-- Optional builtin: __unix__
-- Optional builtin: unix
-- Optional builtin: __windows__
-- Optional builtin: windows
Each of these macros is conditionally defined as needed to
describe the environment of `m4'. If defined, each macro expands
to the empty string.
When GNU extensions are in effect (that is, when you did not use the
`-G' option, *note Invoking m4::), GNU `m4' will define the macro
`__gnu__' to expand to the empty string.
__gnu__
=>
ifdef(`__gnu__', `Extensions are active')
=>Extensions are active
On UNIX systems, GNU `m4' will define `__unix__' by default, or
`unix' when the `-G' option is specified.
On native Windows systems, GNU `m4' will define `__windows__' by
default, or `windows' when the `-G' option is specified.
On OS/2 systems, GNU `m4' will define `__os2__' by default, or `os2'
when the `-G' option is specified.
If GNU `m4' does not provide a platform macro for your system,
please report that as a bug.
define(`provided', `0')
=>
ifdef(`__unix__', `define(`provided', incr(provided))')
=>
ifdef(`__windows__', `define(`provided', incr(provided))')
=>
ifdef(`__os2__', `define(`provided', incr(provided))')
=>
provided
=>1
File: m4.info, Node: Syscmd, Next: Esyscmd, Prev: Platform macros, Up: Shell commands
12.2 Executing simple commands
==============================
Any shell command can be executed, using `syscmd':
-- Builtin: syscmd (SHELL-COMMAND)
Executes SHELL-COMMAND as a shell command.
The expansion of `syscmd' is void, _not_ the output from
SHELL-COMMAND! Output or error messages from SHELL-COMMAND are
not read by `m4'. *Note Esyscmd::, if you need to process the
command output.
Prior to executing the command, `m4' flushes its output buffers.
The default standard input, output and error of SHELL-COMMAND are
the same as those of `m4'.
The macro `syscmd' is recognized only with parameters.
define(`foo', `FOO')
=>
syscmd(`echo foo')
=>foo
=>
Note how the expansion of `syscmd' keeps the trailing newline of the
command, as well as using the newline that appeared after the macro.
File: m4.info, Node: Esyscmd, Next: Sysval, Prev: Syscmd, Up: Shell commands
12.3 Reading the output of commands
===================================
If you want `m4' to read the output of a shell command, use `esyscmd':
-- Builtin: esyscmd (SHELL-COMMAND)
Expands to the standard output of the shell command SHELL-COMMAND.
Prior to executing the command, `m4' flushes its output buffers.
The default standard input and error output of SHELL-COMMAND are
the same as those of `m4'. The error output of SHELL-COMMAND is
not a part of the expansion: it will appear along with the error
output of `m4'.
The macro `esyscmd' is recognized only with parameters.
define(`foo', `FOO')
=>
esyscmd(`echo foo')
=>FOO
=>
Note how the expansion of `esyscmd' keeps the trailing newline of
the command, as well as using the newline that appeared after the macro.
File: m4.info, Node: Sysval, Next: Maketemp, Prev: Esyscmd, Up: Shell commands
12.4 Exit status
================
To see whether a shell command succeeded, use `sysval':
-- Builtin: sysval
Expands to the exit status of the last shell command run with
`syscmd' or `esyscmd'. Expands to 0 if no command has been run
yet.
syscmd(`false')
=>
ifelse(sysval, `0', `zero', `non-zero')
=>non-zero
syscmd(`exit 2')
=>
sysval
=>2
syscmd(`true')
=>
sysval
=>0
esyscmd(`false')
=>
ifelse(sysval, `0', `zero', `non-zero')
=>non-zero
esyscmd(`exit 2')
=>
sysval
=>2
esyscmd(`true')
=>
sysval
=>0
`sysval' results in 127 if there was a problem executing the
command, for example, if the system-imposed argument length is exceeded,
or if there were not enough resources to fork. It is not possible to
distinguish between failed execution and successful execution that had
an exit status of 127.
On UNIX platforms, where it is possible to detect when command
execution is terminated by a signal, rather than a normal exit, the
result is the signal number shifted left by eight bits.
dnl This test assumes kill is a shell builtin, and that signals are
dnl recognizable.
ifdef(`__unix__', ,
`errprint(` skipping: syscmd does not have unix semantics
')m4exit(`77')')dnl
syscmd(`kill -13 $$')
=>
sysval
=>3328
esyscmd(`kill -9 $$')
=>
sysval
=>2304
File: m4.info, Node: Maketemp, Prev: Sysval, Up: Shell commands
12.5 Making names for temporary files
=====================================
Commands specified to `syscmd' or `esyscmd' might need a temporary
file, for output or for some other purpose. There is a builtin macro,
`maketemp', for making temporary file names:
-- Builtin: maketemp (TEMPLATE)
Expands to a name of a new, empty file, made from the string
TEMPLATE, which should end with the string `XXXXXX'. The six `X'
characters are then replaced with random data, in order to make
the file name unique.
The macro `maketemp' is recognized only with parameters.
maketemp(`/tmp/fooXXXXXX')
=>/tmp/fooa07346
File: m4.info, Node: Miscellaneous, Next: Frozen files, Prev: Shell commands, Up: Top
13 Miscellaneous builtin macros
*******************************
This chapter describes various builtins, that do not really belong in
any of the previous chapters.
* Menu:
* Errprint:: Printing error messages
* Location:: Printing current location
* M4exit:: Exiting from m4
File: m4.info, Node: Errprint, Next: Location, Up: Miscellaneous
13.1 Printing error messages
============================
You can print error messages using `errprint':
-- Builtin: errprint (MESSAGE, ...)
Prints MESSAGE and the rest of the arguments on the standard error
output, separated by spaces.
The expansion of `errprint' is void. The macro `errprint' is
recognized only with parameters.
errprint(`Invalid arguments to forloop
')
error-->Invalid arguments to forloop
=>
A trailing newline is _not_ printed automatically, so it must be
supplied as part of the argument, as in the example. BSD
implementations of `m4' do append a trailing newline on each `errprint'
call, while some other implementations only print the first argument.
File: m4.info, Node: Location, Next: M4exit, Prev: Errprint, Up: Miscellaneous
13.2 Printing current location
==============================
To make it possible to specify the location of an error, three utility
builtins exist:
-- Builtin: __file__
-- Builtin: __line__
-- Builtin: __program__
Expand to the quoted name of the current input file, the current
input line number in that file, and the quoted name of the current
invocation of `m4'.
errprint(__program__:__file__:__line__: `input error
')
error-->m4:stdin:1: input error
=>
Line numbers start at 1 for each file. If the file was found due to
the `-I' option or `M4PATH' environment variable, that is reflected in
the file name. The syncline option (`-s', *note Invoking m4::), and the
`f' and `l' flags of `debugmode' (*note Debug Levels::), also use this
notion of current file and line. Redefining the three location macros
has no effect on syncline, debug, or warning message output. Assume
this example is run in the `checks' directory of the GNU M4 package,
using `--include=../examples' in the command line to find the file
`incl.m4' mentioned earlier:
define(`foo', ``$0' called at __file__:__line__')
=>
foo
=>foo called at stdin:2
include(`incl.m4')
=>Include file start
=>foo called at ../examples/incl.m4:2
=>Include file end
=>
Currently, all text wrapped with `m4wrap' (*note M4wrap::) behaves
as though it came from line 0 of the file "". It is hoped that a
future release of `m4' can overcome this limitation and remember which
file invoked the call to `m4wrap'.
The `__program__' macro behaves like `$0' in shell terminology. If
you invoke `m4' through an absolute path or a link with a different
spelling, rather than by relying on a `PATH' search for plain `m4', it
will affect how `__program__' expands. The intent is that you can use
it to produce error messages with the same formatting that `m4'
produces internally. It can also be used within `syscmd' (*note
Syscmd::) to pick the same version of `m4' that is currently running,
rather than whatever version of `m4' happens to be first in `PATH'.
File: m4.info, Node: M4exit, Prev: Location, Up: Miscellaneous
13.3 Exiting from `m4'
======================
If you need to exit from `m4' before the entire input has been read,
you can use `m4exit':
-- Builtin: m4exit ([CODE = `0'])
Causes `m4' to exit, with exit status CODE. If CODE is left out,
the exit status is zero. If CODE cannot be parsed, or is outside
the range of 0 to 255, the exit status is one. No further input
is read, and all wrapped and diverted text is discarded.
A common use of this is to abort processing:
-- Composite: fatal_error (MESSAGE)
Abort processing with an error message and non-zero status. Prefix
MESSAGE with details about where the error occurred, and print the
resulting string to standard error.
define(`fatal_error',
`errprint(__program__:__file__:__line__`: fatal error: $*
')m4exit(`1')')
=>
fatal_error(`this is a BAD one, buster')
error-->m4:stdin:4: fatal error: this is a BAD one, buster
After this macro call, `m4' will exit with exit status 1. This macro
is only intended for error exits, since the normal exit procedures are
not followed, e.g., diverted text is not undiverted, and saved text
(*note M4wrap::) is not reread. (This macro has a subtle bug, when
invoked from wrapped text. You should try to see if you can find it and
correct it. *note Answers::)
m4wrap(`This text is lost to `m4exit'.')
=>
divert(`1') And so is this.
divert
=>
m4exit
Note that it is still possible for the exit status to be different
than what was requested by `m4exit'. If `m4' detects some other error,
such as a write error on standard out, the exit status will be non-zero
even if `m4exit' requested zero.
File: m4.info, Node: Frozen files, Next: Compatibility, Prev: Miscellaneous, Up: Top
14 Fast loading of frozen state
*******************************
Some bigger `m4' applications may be built over a common base
containing hundreds of definitions and other costly initializations.
Usually, the common base is kept in one or more declarative files,
which files are listed on each `m4' invocation prior to the user's
input file, or else each input file uses `include'.
Reading the common base of a big application, over and over again,
may be time consuming. GNU `m4' offers some machinery to speed up the
start of an application using lengthy common bases.
* Menu:
* Using frozen files:: Using frozen files
* Frozen file format:: Frozen file format
File: m4.info, Node: Using frozen files, Next: Frozen file format, Up: Frozen files
14.1 Using frozen files
=======================
Suppose a user has a library of `m4' initializations in `base.m4',
which is then used with multiple input files:
m4 base.m4 input1.m4
m4 base.m4 input2.m4
m4 base.m4 input3.m4
Rather than spending time parsing the fixed contents of `base.m4'
every time, the user might rather execute:
m4 -F base.m4f base.m4
once, and further execute, as often as needed:
m4 -R base.m4f input1.m4
m4 -R base.m4f input2.m4
m4 -R base.m4f input3.m4
with the varying input. The first call, containing the `-F' option,
only reads and executes file `base.m4', defining various application
macros and computing other initializations. Once the input file
`base.m4' has been completely processed, GNU `m4' produces on
`base.m4f' a "frozen" file, that is, a file which contains a kind of
snapshot of the `m4' internal state.
Later calls, containing the `-R' option, are able to reload the
internal state of `m4', from `base.m4f', _prior_ to reading any other
input files. This means instead of starting with a virgin copy of
`m4', input will be read after having effectively recovered the effect
of a prior run. In our example, the effect is the same as if file
`base.m4' has been read anew. However, this effect is achieved a lot
faster.
Only one frozen file may be created or read in any one `m4'
invocation. It is not possible to recover two frozen files at once.
However, frozen files may be updated incrementally, through using `-R'
and `-F' options simultaneously. For example, if some care is taken,
the command:
m4 file1.m4 file2.m4 file3.m4 file4.m4
could be broken down in the following sequence, accumulating the same
output:
m4 -F file1.m4f file1.m4
m4 -R file1.m4f -F file2.m4f file2.m4
m4 -R file2.m4f -F file3.m4f file3.m4
m4 -R file3.m4f file4.m4
Some care is necessary because not every effort has been made for
this to work in all cases. In particular, the trace attribute of
macros is not handled, nor the current setting of `changeword'.
Currently, `m4wrap' and `sysval' also have problems. Also,
interactions for some options of `m4', being used in one call and not
in the next, have not been fully analyzed yet. On the other end, you
may be confident that stacks of `pushdef' definitions are handled
correctly, as well as undefined or renamed builtins, and changed
strings for quotes or comments. And future releases of GNU M4 will
improve on the utility of frozen files.
When an `m4' run is to be frozen, the automatic undiversion which
takes place at end of execution is inhibited. Instead, all positively
numbered diversions are saved into the frozen file. The active
diversion number is also transmitted.
A frozen file to be reloaded need not reside in the current
directory. It is looked up the same way as an `include' file (*note
Search Path::).
If the frozen file was generated with a newer version of `m4', and
contains directives that an older `m4' cannot parse, attempting to load
the frozen file with option `-R' will cause `m4' to exit with status 63
to indicate version mismatch.
File: m4.info, Node: Frozen file format, Prev: Using frozen files, Up: Frozen files
14.2 Frozen file format
=======================
Frozen files are sharable across architectures. It is safe to write a
frozen file on one machine and read it on another, given that the
second machine uses the same or newer version of GNU `m4'. It is
conventional, but not required, to give a frozen file the suffix of
`.m4f'.
These are simple (editable) text files, made up of directives, each
starting with a capital letter and ending with a newline (<NL>).
Wherever a directive is expected, the character `#' introduces a
comment line; empty lines are also ignored if they are not part of an
embedded string. In the following descriptions, each LEN refers to the
length of the corresponding strings STR in the next line of input.
Numbers are always expressed in decimal. There are no escape
characters. The directives are:
`C LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Uses STR1 and STR2 as the begin-comment and end-comment strings.
If omitted, then `#' and <NL> are the comment delimiters.
`D NUMBER, LEN <NL> STR <NL>'
Selects diversion NUMBER, making it current, then copy STR in the
current diversion. NUMBER may be a negative number for a
non-existing diversion. To merely specify an active selection,
use this command with an empty STR. With 0 as the diversion
NUMBER, STR will be issued on standard output at reload time. GNU
`m4' will not produce the `D' directive with non-zero length for
diversion 0, but this can be done with manual edits. This
directive may appear more than once for the same diversion, in
which case the diversion is the concatenation of the various uses.
If omitted, then diversion 0 is current.
`F LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Defines, through `pushdef', a definition for STR1 expanding to the
function whose builtin name is STR2. If the builtin does not
exist (for example, if the frozen file was produced by a copy of
`m4' compiled with changeword support, but the version of `m4'
reloading was compiled without it), the reload is silent, but any
subsequent use of the definition of STR1 will result in a warning.
This directive may appear more than once for the same name, and
its order, along with `T', is important. If omitted, you will
have no access to any builtins.
`Q LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Uses STR1 and STR2 as the begin-quote and end-quote strings. If
omitted, then ``' and `'' are the quote delimiters.
`T LEN1 , LEN2 <NL> STR1 STR2 <NL>'
Defines, though `pushdef', a definition for STR1 expanding to the
text given by STR2. This directive may appear more than once for
the same name, and its order, along with `F', is important.
`V NUMBER <NL>'
Confirms the format of the file. `m4' 1.4.6 only creates and
understands frozen files where NUMBER is 1. This directive must
be the first non-comment in the file, and may not appear more than
once.
File: m4.info, Node: Compatibility, Next: Answers, Prev: Frozen files, Up: Top
15 Compatibility with other versions of `m4'
********************************************
This chapter describes the differences between this implementation of
`m4', and the implementation found under UNIX, notably System V,
Release 3.
There are also differences in BSD flavors of `m4'. No attempt is
made to summarize these here.
* Menu:
* Extensions:: Extensions in GNU M4
* Incompatibilities:: Facilities in System V m4 not in GNU M4
* Other Incompatibilities:: Other incompatibilities
File: m4.info, Node: Extensions, Next: Incompatibilities, Up: Compatibility
15.1 Extensions in GNU `m4'
===========================
This version of `m4' contains a few facilities that do not exist in
System V `m4'. These extra facilities are all suppressed by using the
`-G' command line option (*note Invoking m4::), unless overridden by
other command line options.
* In the `$'N notation for macro arguments, N can contain several
digits, while the System V `m4' only accepts one digit. This
allows macros in GNU `m4' to take any number of arguments, and not
only nine (*note Arguments::).
This means that `define(`foo', `$11')' is ambiguous between
implementations. To portably choose between grabbing the first
parameter and appending 1 to the expansion, or grabbing the
eleventh parameter, you can do the following:
define(`a1', `A1')
=>
dnl First argument, concatenated with 1
define(`_1', `$1')define(`first1', `_1($@)1')
=>
dnl Eleventh argument, portable
define(`_9', `$9')define(`eleventh', `_9(shift(shift($@)))')
=>
dnl Eleventh argument, GNU style
define(`Eleventh', `$11')
=>
first1(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k')
=>A1
eleventh(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k')
=>k
Eleventh(`a', `b', `c', `d', `e', `f', `g', `h', `i', `j', `k')
=>k
* The `divert' (*note Divert::) macro can manage more than 9
diversions. GNU `m4' treats all positive numbers as valid
diversions, rather than discarding diversions greater than 9.
* Files included with `include' and `sinclude' are sought in a user
specified search path, if they are not found in the working
directory. The search path is specified by the `-I' option and the
`M4PATH' environment variable (*note Search Path::).
* Arguments to `undivert' can be non-numeric, in which case the named
file will be included uninterpreted in the output (*note
Undivert::).
* Formatted output is supported through the `format' builtin, which
is modeled after the C library function `printf' (*note Format::).
* Searches and text substitution through regular expressions are
supported by the `regexp' (*note Regexp::) and `patsubst' (*note
Patsubst::) builtins.
* The output of shell commands can be read into `m4' with `esyscmd'
(*note Esyscmd::).
* There is indirect access to any builtin macro with `builtin'
(*note Builtin::).
* Macros can be called indirectly through `indir' (*note Indir::).
* The name of the program, the current input file, and the current
input line number are accessible through the builtins
`__program__', `__file__', and `__line__' (*note Location::).
* The format of the output from `dumpdef' and macro tracing can be
controlled with `debugmode' (*note Debug Levels::).
* The destination of trace and debug output can be controlled with
`debugfile' (*note Debug Output::).
In addition to the above extensions, GNU `m4' implements the
following command line options: `-F', `-G', `-I', `-L', `-R', `-V',
`-W', `-d', `-l', `-o' and `-t'. *Note Invoking m4::, for a
description of these options.
Also, the debugging and tracing facilities in GNU `m4' are much more
extensive than in most other versions of `m4'.
File: m4.info, Node: Incompatibilities, Next: Other Incompatibilities, Prev: Extensions, Up: Compatibility
15.2 Facilities in System V `m4' not in GNU `m4'
================================================
The version of `m4' from System V contains a few facilities that have
not been implemented in GNU `m4' yet. Additionally, POSIX requires
some behaviors that GNU `m4' has not implemented yet. Relying on these
behaviors is non-portable, as a future release of GNU `m4' may change.
* System V `m4' supports multiple arguments to `defn', and POSIX
requires it. This is not yet implemented in GNU `m4'.
Unfortunately, this means it is not possible to mix builtins and
other text into a single macro; a helper macro is required.
* POSIX requires an application to exit with non-zero status if it
wrote an error message to stderr. This has not yet been
consistently implemented for the various builtins that are
required to issue an error (such as `include' (*note Include::)
when a file is unreadable, `eval' (*note Eval::) when an argument
cannot be parsed, or using `m4exit' (*note M4exit::) with a
non-numeric argument).
* POSIX requires `m4wrap' (*note M4wrap::) to act in FIFO (first-in,
first-out) order, but GNU `m4' currently uses LIFO order.
Furthermore, POSIX states that only the first argument to `m4wrap'
is saved for later evaluation, bug GNU `m4' saves and processes
all arguments, with output separated by spaces.
However, it is possible to emulate POSIX behavior by including the
file `examples/wrapfifo.m4' from the distribution:
undivert(`wrapfifo.m4')dnl
=>dnl Redefine m4wrap to have FIFO semantics.
=>define(`_m4wrap_level', `0')dnl
=>define(`m4wrap',
=>`ifdef(`m4wrap'_m4wrap_level,
=> `define(`m4wrap'_m4wrap_level,
=> defn(`m4wrap'_m4wrap_level)`$1')',
=> `builtin(`m4wrap', `define(`_m4wrap_level',
=> incr(_m4wrap_level))dnl
=>m4wrap'_m4wrap_level)dnl
=>define(`m4wrap'_m4wrap_level, `$1')')')dnl
include(`wrapfifo.m4')
=>
m4wrap(`a`'m4wrap(`c
', `d')')m4wrap(`b')
=>
^D
=>abc
* POSIX requires that all builtins that require arguments, but are
called without arguments, behave as though empty strings had been
passed. For example, `a`'define`'b' would expand to `ab'. But
GNU `m4' ignores certain builtins if they have missing arguments,
giving `adefineb' for the above example.
* Traditional implementations handle `define(`f',`1')' (*note
Define::) by undefining the entire stack of previous definitions,
and if doing `undefine(`f')' first. GNU `m4' replaces just the top
definition on the stack, as if doing `popdef(`f')' followed by
`pushdef(`f',`1')'.
* POSIX requires `syscmd' (*note Syscmd::) to evaluate command
output for macro expansion, but this appears to be a mistake in
POSIX since traditional implementations did not do this. GNU `m4'
follows traditional behavior in `syscmd', and provides the
extension `esyscmd' that provides the POSIX semantics.
* POSIX requires `maketemp' (*note Maketemp::) to replace the
trailing `X' characters with the `m4' process id, giving the same
result on identical input, without creating any files, which
leaves the door open for a data race in which other processes can
create a file by the same name. GNU `m4' actually creates a
temporary file for each invocation of `maketemp', which means that
the output of the macro is different even if the input is
identical.
* POSIX requires `changequote(ARG)' (*note Changequote::) to use
newline as the close quote, but GNU `m4' uses `'' as the close
quote. Meanwhile, some traditional implementations use ARG as the
close quote, making it impossible to nest quotes. For predictable
results, never call changequote with just one argument.
* Some implementations of `m4' give macros a higher precedence than
comments when parsing, meaning that if the start delimiter given to
`changecom' (*note Changecom::) starts with a macro name, comments
are effectively disabled. POSIX does not specify what the
precedence is, so the GNU `m4' parser recognizes comments, then
macros, then quoted strings.
* Traditional implementations allow argument collection, but not
string and comment processing, to span file boundaries. Thus, if
`a.m4' contains `len(', and `b.m4' contains `abc)', `m4 a.m4 b.m4'
outputs `3' with traditional `m4', but gives an error message that
the end of file was encountered inside a macro with GNU `m4'. On
the other hand, traditional implementations do end of file
processing for files included with `include' or `sinclude' (*note
Include::), while GNU `m4' seamlessly integrates the content of
those files. Thus `include(`a.m4')include(`b.m4')' will output
`3' instead of giving an error.
* Traditional `m4' treats `traceon' (*note Trace::) without
arguments as a global variable, independent of named macro tracing.
Also, once a macro is undefined, named tracing of that macro is
lost. On the other hand, when GNU `m4' encounters `traceon'
without arguments, it turns tracing on for all existing
definitions at the time, but does not trace future definitions;
`traceoff' without arguments turns tracing off for all definitions
regardless of whether they were also traced by name; and tracing
by name, such as with `-tfoo' at the command line or
`traceon(`foo')' in the input, is an attribute that is preserved
even if the macro is currently undefined.
* POSIX requires `eval' (*note Eval::) to treat all operators with
the same precedence as C. However, GNU `m4' currently follows the
traditional precedence of other `m4' implementations, where
bitwise and logical negation (`~' and `!') have lower precedence
than equality operators, rather than equal precedence with other
unary operators. Use explicit parentheses to ensure proper
precedence. As extensions to POSIX, GNU `m4' treats the shift
operators `<<' and `>>' as well-defined on signed integers (even
though they are not in C), and adds the exponentiation operator
`**'.
* POSIX requires `translit' (*note Translit::) to treat each
character of the second and third arguments literally, but GNU
`m4' treats `-' as a range operator.
* POSIX requires `m4' to honor the locale environment variables of
`LANG', `LC_ALL', `LC_CTYPE', `LC_MESSAGES', and `NLSPATH', but
this has not yet been implemented in GNU `m4'.
File: m4.info, Node: Other Incompatibilities, Prev: Incompatibilities, Up: Compatibility
15.3 Other incompatibilities
============================
There are a few other incompatibilities between this implementation of
`m4', and the System V version.
* GNU `m4' implements sync lines differently from System V `m4',
when text is being diverted. GNU `m4' outputs the sync lines when
the text is being diverted, and System V `m4' when the diverted
text is being brought back.
The problem is which lines and file names should be attached to
text that is being, or has been, diverted. System V `m4' regards
all the diverted text as being generated by the source line
containing the `undivert' call, whereas GNU `m4' regards the
diverted text as being generated at the time it is diverted.
The sync line option is used mostly when using `m4' as a front end
to a compiler. If a diverted line causes a compiler error, the
error messages should most probably refer to the place where the
diversion were made, and not where it was inserted again.
* GNU `m4' makes no attempt at prohibiting self-referential
definitions like:
define(`x', `x')
=>
define(`x', `x ')
=>
There is nothing inherently wrong with defining `x' to return `x'.
The wrong thing is to expand `x' unquoted. In `m4', one might
use macros to hold strings, as we do for variables in other
programming languages, further checking them with:
ifelse(defn(`HOLDER'), `VALUE', ...)
In cases like this one, an interdiction for a macro to hold its own
name would be a useless limitation. Of course, this leaves more
rope for the GNU `m4' user to hang himself! Rescanning hangs may
be avoided through careful programming, a little like for endless
loops in traditional programming languages.
File: m4.info, Node: Answers, Next: Copying This Manual, Prev: Compatibility, Up: Top
16 Correct version of some examples
***********************************
Some of the examples in this manuals are buggy, for demonstration
purposes. Correctly working macros are presented here.
The `exch' macro (*note Arguments::) as presented requires clients
to double quote their arguments. A nicer definition, which lets
clients follow the rule of thumb of one level of quoting per level of
parentheses, involves adding quotes in the definition of `exch', as
follows:
define(`exch', ``$2', `$1'')
=>
define(exch(`expansion text', `macro'))
=>
macro
=>expansion text
The `cleardivert' macro (*note Cleardiv::) cannot, as it stands, be
called without arguments to clear all pending diversions. That is
because using undivert with an empty string for an argument is different
than using it with no arguments at all. Compare the earlier definition
with one that takes the number of arguments into account:
define(`cleardivert',
`pushdef(`_n', divnum)divert(`-1')undivert($@)divert(_n)popdef(`_n')')
=>
divert(`1')one
divert
=>
cleardivert
=>
undivert
=>one
=>
define(`cleardivert',
`pushdef(`_num', divnum)divert(`-1')ifelse(`$#', `0',
`undivert`'', `undivert($@)')divert(_num)popdef(`_num')')
=>
divert(`2')two
divert
=>
cleardivert
=>
undivert
=>
The `fatal_error' macro (*note M4exit::) does not quite match the
format of internal error messages when invoked inside wrapped text, due
to the current limitations of `__file__' (*note Location::) when
invoked inside `m4wrap'. Since `m4' omits the file and line number
from its warning messages when there is no current file (or
equivalently, when the current line is 0, since all files start at line
1), a better implementation would be:
define(`fatal_error',
`errprint(__program__:ifelse(__line__, `0', `',
`__file__:__line__:')` fatal error: $*
')m4exit(`1')')
=>
m4wrap(`divnum(`demo of internal message')
fatal_error(`inside wrapped text')')
=>
^D
error-->m4: Warning: excess arguments to builtin `divnum' ignored
=>0
error-->m4: fatal error: inside wrapped text
File: m4.info, Node: Copying This Manual, Next: Indices, Prev: Answers, Up: Top
Appendix A Copying This Manual
******************************
* Menu:
* GNU Free Documentation License:: License for copying this manual
File: m4.info, Node: GNU Free Documentation License, Up: Copying This Manual
A.1 GNU Free Documentation License
==================================
Version 1.2, November 2002
Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
0. PREAMBLE
The purpose of this License is to make a manual, textbook, or other
functional and useful document "free" in the sense of freedom: to
assure everyone the effective freedom to copy and redistribute it,
with or without modifying it, either commercially or
noncommercially. Secondarily, this License preserves for the
author and publisher a way to get credit for their work, while not
being considered responsible for modifications made by others.
This License is a kind of "copyleft", which means that derivative
works of the document must themselves be free in the same sense.
It complements the GNU General Public License, which is a copyleft
license designed for free software.
We have designed this License in order to use it for manuals for
free software, because free software needs free documentation: a
free program should come with manuals providing the same freedoms
that the software does. But this License is not limited to
software manuals; it can be used for any textual work, regardless
of subject matter or whether it is published as a printed book.
We recommend this License principally for works whose purpose is
instruction or reference.
1. APPLICABILITY AND DEFINITIONS
This License applies to any manual or other work, in any medium,
that contains a notice placed by the copyright holder saying it
can be distributed under the terms of this License. Such a notice
grants a world-wide, royalty-free license, unlimited in duration,
to use that work under the conditions stated herein. The
"Document", below, refers to any such manual or work. Any member
of the public is a licensee, and is addressed as "you". You
accept the license if you copy, modify or distribute the work in a
way requiring permission under copyright law.
A "Modified Version" of the Document means any work containing the
Document or a portion of it, either copied verbatim, or with
modifications and/or translated into another language.
A "Secondary Section" is a named appendix or a front-matter section
of the Document that deals exclusively with the relationship of the
publishers or authors of the Document to the Document's overall
subject (or to related matters) and contains nothing that could
fall directly within that overall subject. (Thus, if the Document
is in part a textbook of mathematics, a Secondary Section may not
explain any mathematics.) The relationship could be a matter of
historical connection with the subject or with related matters, or
of legal, commercial, philosophical, ethical or political position
regarding them.
The "Invariant Sections" are certain Secondary Sections whose
titles are designated, as being those of Invariant Sections, in
the notice that says that the Document is released under this
License. If a section does not fit the above definition of
Secondary then it is not allowed to be designated as Invariant.
The Document may contain zero Invariant Sections. If the Document
does not identify any Invariant Sections then there are none.
The "Cover Texts" are certain short passages of text that are
listed, as Front-Cover Texts or Back-Cover Texts, in the notice
that says that the Document is released under this License. A
Front-Cover Text may be at most 5 words, and a Back-Cover Text may
be at most 25 words.
A "Transparent" copy of the Document means a machine-readable copy,
represented in a format whose specification is available to the
general public, that is suitable for revising the document
straightforwardly with generic text editors or (for images
composed of pixels) generic paint programs or (for drawings) some
widely available drawing editor, and that is suitable for input to
text formatters or for automatic translation to a variety of
formats suitable for input to text formatters. A copy made in an
otherwise Transparent file format whose markup, or absence of
markup, has been arranged to thwart or discourage subsequent
modification by readers is not Transparent. An image format is
not Transparent if used for any substantial amount of text. A
copy that is not "Transparent" is called "Opaque".
Examples of suitable formats for Transparent copies include plain
ASCII without markup, Texinfo input format, LaTeX input format,
SGML or XML using a publicly available DTD, and
standard-conforming simple HTML, PostScript or PDF designed for
human modification. Examples of transparent image formats include
PNG, XCF and JPG. Opaque formats include proprietary formats that
can be read and edited only by proprietary word processors, SGML or
XML for which the DTD and/or processing tools are not generally
available, and the machine-generated HTML, PostScript or PDF
produced by some word processors for output purposes only.
The "Title Page" means, for a printed book, the title page itself,
plus such following pages as are needed to hold, legibly, the
material this License requires to appear in the title page. For
works in formats which do not have any title page as such, "Title
Page" means the text near the most prominent appearance of the
work's title, preceding the beginning of the body of the text.
A section "Entitled XYZ" means a named subunit of the Document
whose title either is precisely XYZ or contains XYZ in parentheses
following text that translates XYZ in another language. (Here XYZ
stands for a specific section name mentioned below, such as
"Acknowledgements", "Dedications", "Endorsements", or "History".)
To "Preserve the Title" of such a section when you modify the
Document means that it remains a section "Entitled XYZ" according
to this definition.
The Document may include Warranty Disclaimers next to the notice
which states that this License applies to the Document. These
Warranty Disclaimers are considered to be included by reference in
this License, but only as regards disclaiming warranties: any other
implication that these Warranty Disclaimers may have is void and
has no effect on the meaning of this License.
2. VERBATIM COPYING
You may copy and distribute the Document in any medium, either
commercially or noncommercially, provided that this License, the
copyright notices, and the license notice saying this License
applies to the Document are reproduced in all copies, and that you
add no other conditions whatsoever to those of this License. You
may not use technical measures to obstruct or control the reading
or further copying of the copies you make or distribute. However,
you may accept compensation in exchange for copies. If you
distribute a large enough number of copies you must also follow
the conditions in section 3.
You may also lend copies, under the same conditions stated above,
and you may publicly display copies.
3. COPYING IN QUANTITY
If you publish printed copies (or copies in media that commonly
have printed covers) of the Document, numbering more than 100, and
the Document's license notice requires Cover Texts, you must
enclose the copies in covers that carry, clearly and legibly, all
these Cover Texts: Front-Cover Texts on the front cover, and
Back-Cover Texts on the back cover. Both covers must also clearly
and legibly identify you as the publisher of these copies. The
front cover must present the full title with all words of the
title equally prominent and visible. You may add other material
on the covers in addition. Copying with changes limited to the
covers, as long as they preserve the title of the Document and
satisfy these conditions, can be treated as verbatim copying in
other respects.
If the required texts for either cover are too voluminous to fit
legibly, you should put the first ones listed (as many as fit
reasonably) on the actual cover, and continue the rest onto
adjacent pages.
If you publish or distribute Opaque copies of the Document
numbering more than 100, you must either include a
machine-readable Transparent copy along with each Opaque copy, or
state in or with each Opaque copy a computer-network location from
which the general network-using public has access to download
using public-standard network protocols a complete Transparent
copy of the Document, free of added material. If you use the
latter option, you must take reasonably prudent steps, when you
begin distribution of Opaque copies in quantity, to ensure that
this Transparent copy will remain thus accessible at the stated
location until at least one year after the last time you
distribute an Opaque copy (directly or through your agents or
retailers) of that edition to the public.
It is requested, but not required, that you contact the authors of
the Document well before redistributing any large number of
copies, to give them a chance to provide you with an updated
version of the Document.
4. MODIFICATIONS
You may copy and distribute a Modified Version of the Document
under the conditions of sections 2 and 3 above, provided that you
release the Modified Version under precisely this License, with
the Modified Version filling the role of the Document, thus
licensing distribution and modification of the Modified Version to
whoever possesses a copy of it. In addition, you must do these
things in the Modified Version:
A. Use in the Title Page (and on the covers, if any) a title
distinct from that of the Document, and from those of
previous versions (which should, if there were any, be listed
in the History section of the Document). You may use the
same title as a previous version if the original publisher of
that version gives permission.
B. List on the Title Page, as authors, one or more persons or
entities responsible for authorship of the modifications in
the Modified Version, together with at least five of the
principal authors of the Document (all of its principal
authors, if it has fewer than five), unless they release you
from this requirement.
C. State on the Title page the name of the publisher of the
Modified Version, as the publisher.
D. Preserve all the copyright notices of the Document.
E. Add an appropriate copyright notice for your modifications
adjacent to the other copyright notices.
F. Include, immediately after the copyright notices, a license
notice giving the public permission to use the Modified
Version under the terms of this License, in the form shown in
the Addendum below.
G. Preserve in that license notice the full lists of Invariant
Sections and required Cover Texts given in the Document's
license notice.
H. Include an unaltered copy of this License.
I. Preserve the section Entitled "History", Preserve its Title,
and add to it an item stating at least the title, year, new
authors, and publisher of the Modified Version as given on
the Title Page. If there is no section Entitled "History" in
the Document, create one stating the title, year, authors,
and publisher of the Document as given on its Title Page,
then add an item describing the Modified Version as stated in
the previous sentence.
J. Preserve the network location, if any, given in the Document
for public access to a Transparent copy of the Document, and
likewise the network locations given in the Document for
previous versions it was based on. These may be placed in
the "History" section. You may omit a network location for a
work that was published at least four years before the
Document itself, or if the original publisher of the version
it refers to gives permission.
K. For any section Entitled "Acknowledgements" or "Dedications",
Preserve the Title of the section, and preserve in the
section all the substance and tone of each of the contributor
acknowledgements and/or dedications given therein.
L. Preserve all the Invariant Sections of the Document,
unaltered in their text and in their titles. Section numbers
or the equivalent are not considered part of the section
titles.
M. Delete any section Entitled "Endorsements". Such a section
may not be included in the Modified Version.
N. Do not retitle any existing section to be Entitled
"Endorsements" or to conflict in title with any Invariant
Section.
O. Preserve any Warranty Disclaimers.
If the Modified Version includes new front-matter sections or
appendices that qualify as Secondary Sections and contain no
material copied from the Document, you may at your option
designate some or all of these sections as invariant. To do this,
add their titles to the list of Invariant Sections in the Modified
Version's license notice. These titles must be distinct from any
other section titles.
You may add a section Entitled "Endorsements", provided it contains
nothing but endorsements of your Modified Version by various
parties--for example, statements of peer review or that the text
has been approved by an organization as the authoritative
definition of a standard.
You may add a passage of up to five words as a Front-Cover Text,
and a passage of up to 25 words as a Back-Cover Text, to the end
of the list of Cover Texts in the Modified Version. Only one
passage of Front-Cover Text and one of Back-Cover Text may be
added by (or through arrangements made by) any one entity. If the
Document already includes a cover text for the same cover,
previously added by you or by arrangement made by the same entity
you are acting on behalf of, you may not add another; but you may
replace the old one, on explicit permission from the previous
publisher that added the old one.
The author(s) and publisher(s) of the Document do not by this
License give permission to use their names for publicity for or to
assert or imply endorsement of any Modified Version.
5. COMBINING DOCUMENTS
You may combine the Document with other documents released under
this License, under the terms defined in section 4 above for
modified versions, provided that you include in the combination
all of the Invariant Sections of all of the original documents,
unmodified, and list them all as Invariant Sections of your
combined work in its license notice, and that you preserve all
their Warranty Disclaimers.
The combined work need only contain one copy of this License, and
multiple identical Invariant Sections may be replaced with a single
copy. If there are multiple Invariant Sections with the same name
but different contents, make the title of each such section unique
by adding at the end of it, in parentheses, the name of the
original author or publisher of that section if known, or else a
unique number. Make the same adjustment to the section titles in
the list of Invariant Sections in the license notice of the
combined work.
In the combination, you must combine any sections Entitled
"History" in the various original documents, forming one section
Entitled "History"; likewise combine any sections Entitled
"Acknowledgements", and any sections Entitled "Dedications". You
must delete all sections Entitled "Endorsements."
6. COLLECTIONS OF DOCUMENTS
You may make a collection consisting of the Document and other
documents released under this License, and replace the individual
copies of this License in the various documents with a single copy
that is included in the collection, provided that you follow the
rules of this License for verbatim copying of each of the
documents in all other respects.
You may extract a single document from such a collection, and
distribute it individually under this License, provided you insert
a copy of this License into the extracted document, and follow
this License in all other respects regarding verbatim copying of
that document.
7. AGGREGATION WITH INDEPENDENT WORKS
A compilation of the Document or its derivatives with other
separate and independent documents or works, in or on a volume of
a storage or distribution medium, is called an "aggregate" if the
copyright resulting from the compilation is not used to limit the
legal rights of the compilation's users beyond what the individual
works permit. When the Document is included in an aggregate, this
License does not apply to the other works in the aggregate which
are not themselves derivative works of the Document.
If the Cover Text requirement of section 3 is applicable to these
copies of the Document, then if the Document is less than one half
of the entire aggregate, the Document's Cover Texts may be placed
on covers that bracket the Document within the aggregate, or the
electronic equivalent of covers if the Document is in electronic
form. Otherwise they must appear on printed covers that bracket
the whole aggregate.
8. TRANSLATION
Translation is considered a kind of modification, so you may
distribute translations of the Document under the terms of section
4. Replacing Invariant Sections with translations requires special
permission from their copyright holders, but you may include
translations of some or all Invariant Sections in addition to the
original versions of these Invariant Sections. You may include a
translation of this License, and all the license notices in the
Document, and any Warranty Disclaimers, provided that you also
include the original English version of this License and the
original versions of those notices and disclaimers. In case of a
disagreement between the translation and the original version of
this License or a notice or disclaimer, the original version will
prevail.
If a section in the Document is Entitled "Acknowledgements",
"Dedications", or "History", the requirement (section 4) to
Preserve its Title (section 1) will typically require changing the
actual title.
9. TERMINATION
You may not copy, modify, sublicense, or distribute the Document
except as expressly provided for under this License. Any other
attempt to copy, modify, sublicense or distribute the Document is
void, and will automatically terminate your rights under this
License. However, parties who have received copies, or rights,
from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
10. FUTURE REVISIONS OF THIS LICENSE
The Free Software Foundation may publish new, revised versions of
the GNU Free Documentation License from time to time. Such new
versions will be similar in spirit to the present version, but may
differ in detail to address new problems or concerns. See
`http://www.gnu.org/copyleft/'.
Each version of the License is given a distinguishing version
number. If the Document specifies that a particular numbered
version of this License "or any later version" applies to it, you
have the option of following the terms and conditions either of
that specified version or of any later version that has been
published (not as a draft) by the Free Software Foundation. If
the Document does not specify a version number of this License,
you may choose any version ever published (not as a draft) by the
Free Software Foundation.
A.1.1 ADDENDUM: How to use this License for your documents
----------------------------------------------------------
To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:
Copyright (C) YEAR YOUR NAME.
Permission is granted to copy, distribute and/or modify this document
under the terms of the GNU Free Documentation License, Version 1.2
or any later version published by the Free Software Foundation;
with no Invariant Sections, no Front-Cover Texts, and no Back-Cover
Texts. A copy of the license is included in the section entitled ``GNU
Free Documentation License''.
If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:
with the Invariant Sections being LIST THEIR TITLES, with
the Front-Cover Texts being LIST, and with the Back-Cover Texts
being LIST.
If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.
If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.
File: m4.info, Node: Indices, Prev: Copying This Manual, Up: Top
Appendix B Indices
******************
* Menu:
* Concept index:: Index for many concepts
* Macro index:: Index for all m4 macros
File: m4.info, Node: Concept index, Next: Macro index, Up: Indices
B.1 Concept index
=================
[index ]
* Menu:
* arguments to macros: Macro Arguments. (line 6)
* Arguments to macros: Arguments. (line 6)
* arguments to macros, special: Pseudo Arguments. (line 6)
* arguments, quoted macro: Quoting Arguments. (line 6)
* arithmetic: Arithmetic. (line 6)
* arrays: Define. (line 47)
* builtins, indirect call of: Builtin. (line 6)
* call of builtins, indirect: Builtin. (line 6)
* call of macros, indirect: Indir. (line 6)
* changing comment delimiters: Changecom. (line 6)
* changing the quote delimiters: Changequote. (line 6)
* characters, translating: Translit. (line 6)
* command line, file names on the: Invoking m4. (line 205)
* command line, macro definitions on the: Invoking m4. (line 55)
* command line, options: Invoking m4. (line 10)
* commands, exit status from shell: Sysval. (line 6)
* commands, running shell: Shell commands. (line 6)
* commands, running UNIX: Shell commands. (line 6)
* comment delimiters, changing: Changecom. (line 6)
* comments: Comments. (line 6)
* comments, copied to output: Changecom. (line 29)
* comparing strings: Ifelse. (line 6)
* compatibility: Compatibility. (line 6)
* conditionals: Ifdef. (line 6)
* controlling debugging output: Debug Levels. (line 6)
* counting loops: Loops. (line 49)
* debugging output, controlling: Debug Levels. (line 6)
* debugging output, saving: Debug Output. (line 6)
* decrement operator: Incr. (line 6)
* defining new macros: Definitions. (line 6)
* definitions, displaying macro: Dumpdef. (line 6)
* deleting macros: Undefine. (line 6)
* deleting whitespace in input: Dnl. (line 6)
* discarding diverted text: Cleardiv. (line 6)
* displaying macro definitions: Dumpdef. (line 6)
* diversion numbers: Divnum. (line 6)
* diverted text, discarding: Cleardiv. (line 6)
* diverting output to files: Divert. (line 6)
* dumping into frozen file: Using frozen files. (line 6)
* error messages, printing: Errprint. (line 6)
* evaluation, of integer expressions: Eval. (line 6)
* executing shell commands: Shell commands. (line 6)
* executing UNIX commands: Shell commands. (line 6)
* exit status from shell commands: Sysval. (line 6)
* exiting from m4: M4exit. (line 6)
* expansion of macros: Macro expansion. (line 6)
* expansion, tracing macro: Trace. (line 6)
* expressions, evaluation of integer: Eval. (line 6)
* extracting substrings: Substr. (line 6)
* fast loading of frozen files: Using frozen files. (line 6)
* FDL, GNU Free Documentation License: GNU Free Documentation License.
(line 6)
* file format, frozen file: Frozen file format. (line 6)
* file inclusion <1>: File Inclusion. (line 6)
* file inclusion: Undivert. (line 77)
* file names, on the command line: Invoking m4. (line 205)
* files, diverting output to: Divert. (line 6)
* files, names of temporary: Maketemp. (line 6)
* for loops: Loops. (line 49)
* formatted output: Format. (line 6)
* frozen file format: Frozen file format. (line 6)
* frozen files for fast loading: Using frozen files. (line 6)
* GNU extensions <1>: Esyscmd. (line 6)
* GNU extensions <2>: Extensions. (line 6)
* GNU extensions <3>: Regexp. (line 6)
* GNU extensions <4>: Using frozen files. (line 6)
* GNU extensions <5>: Undivert. (line 77)
* GNU extensions <6>: Patsubst. (line 6)
* GNU extensions <7>: Search Path. (line 6)
* GNU extensions <8>: Arguments. (line 32)
* GNU extensions <9>: Format. (line 6)
* GNU extensions <10>: Indir. (line 6)
* GNU extensions <11>: Debug Output. (line 6)
* GNU extensions <12>: Builtin. (line 6)
* GNU extensions: Debug Levels. (line 59)
* included files, search path for: Search Path. (line 6)
* inclusion, of files <1>: Undivert. (line 77)
* inclusion, of files: File Inclusion. (line 6)
* increment operator: Incr. (line 6)
* indirect call of builtins: Builtin. (line 6)
* indirect call of macros: Indir. (line 6)
* initialization, frozen states: Using frozen files. (line 6)
* input tokens: Syntax. (line 6)
* input, saving: M4wrap. (line 6)
* integer arithmetic: Arithmetic. (line 6)
* integer expression evaluation: Eval. (line 6)
* length of strings: Len. (line 6)
* lexical structure of words: Changeword. (line 6)
* License: Copying This Manual. (line 6)
* local variables: Pushdef. (line 75)
* loops: Loops. (line 10)
* loops, counting: Loops. (line 49)
* macro definitions, on the command line: Invoking m4. (line 55)
* macro expansion, tracing: Trace. (line 6)
* macro invocation: Invocation. (line 6)
* macros, arguments to <1>: Arguments. (line 6)
* macros, arguments to: Macro Arguments. (line 6)
* macros, displaying definitions: Dumpdef. (line 6)
* macros, expansion of: Macro expansion. (line 6)
* macros, how to define new: Definitions. (line 6)
* macros, how to delete: Undefine. (line 6)
* macros, how to rename: Defn. (line 6)
* macros, indirect call of: Indir. (line 6)
* macros, quoted arguments to: Quoting Arguments. (line 6)
* macros, recursive: Loops. (line 6)
* macros, special arguments to: Pseudo Arguments. (line 6)
* macros, temporary redefinition of: Pushdef. (line 6)
* messages, printing error: Errprint. (line 6)
* multibranches: Ifelse. (line 65)
* names: Names. (line 6)
* options, command line: Invoking m4. (line 10)
* output, diverting to files: Divert. (line 6)
* output, formatted: Format. (line 6)
* output, saving debugging: Debug Output. (line 6)
* pattern substitution: Patsubst. (line 6)
* platform macro: Platform macros. (line 31)
* platform macros: Platform macros. (line 6)
* printing error messages: Errprint. (line 6)
* quote delimiters, changing the: Changequote. (line 6)
* quoted macro arguments: Quoting Arguments. (line 6)
* quoted string: Quoted strings. (line 6)
* recursive macros: Loops. (line 6)
* redefinition of macros, temporary: Pushdef. (line 6)
* regular expressions <1>: Patsubst. (line 6)
* regular expressions: Regexp. (line 6)
* reloading a frozen file: Using frozen files. (line 6)
* renaming macros: Defn. (line 6)
* running shell commands: Shell commands. (line 6)
* running UNIX commands: Shell commands. (line 6)
* saving debugging output: Debug Output. (line 6)
* saving input: M4wrap. (line 6)
* search path for included files: Search Path. (line 6)
* shell commands, exit status from: Sysval. (line 6)
* shell commands, running: Shell commands. (line 6)
* special arguments to macros: Pseudo Arguments. (line 6)
* status of shell commands: Sysval. (line 6)
* status, setting m4 exit: M4exit. (line 6)
* strings, length of: Len. (line 6)
* substitution by regular expression: Patsubst. (line 6)
* substrings, extracting: Substr. (line 6)
* temporary file names: Maketemp. (line 6)
* temporary redefinition of macros: Pushdef. (line 6)
* tokens: Syntax. (line 6)
* tracing macro expansion: Trace. (line 6)
* translating characters: Translit. (line 6)
* undefining macros: Undefine. (line 6)
* UNIX commands, exit status from: Sysval. (line 6)
* UNIX commands, running: Shell commands. (line 6)
* variables, local: Pushdef. (line 75)
* words, lexical structure of: Changeword. (line 6)
File: m4.info, Node: Macro index, Prev: Concept index, Up: Indices
B.2 Macro index
===============
References are exclusively to the places where a builtin is introduced
the first time.
[index ]
* Menu:
* __file__: Location. (line 10)
* __gnu__: Platform macros. (line 12)
* __line__: Location. (line 11)
* __os2__: Platform macros. (line 13)
* __program__: Location. (line 12)
* __unix__: Platform macros. (line 15)
* __windows__: Platform macros. (line 17)
* builtin: Builtin. (line 9)
* capitalize: Patsubst. (line 54)
* changecom: Changecom. (line 10)
* changequote: Changequote. (line 10)
* changeword: Changeword. (line 23)
* cleardivert: Cleardiv. (line 26)
* debugfile: Debug Output. (line 11)
* debugmode: Debug Levels. (line 63)
* decr: Incr. (line 11)
* define: Define. (line 10)
* defn: Defn. (line 10)
* divert: Divert. (line 9)
* divnum: Divnum. (line 9)
* dnl: Dnl. (line 9)
* downcase: Patsubst. (line 53)
* dumpdef: Dumpdef. (line 10)
* errprint: Errprint. (line 9)
* esyscmd: Esyscmd. (line 9)
* eval: Eval. (line 9)
* example: Manual. (line 32)
* fatal_error: M4exit. (line 18)
* forloop: Loops. (line 52)
* format: Format. (line 9)
* ifdef: Ifdef. (line 10)
* ifelse: Ifelse. (line 12)
* include: Include. (line 9)
* incr: Incr. (line 10)
* index: Index macro. (line 9)
* indir: Indir. (line 9)
* len: Len. (line 9)
* m4exit: M4exit. (line 10)
* m4wrap: M4wrap. (line 14)
* maketemp: Maketemp. (line 11)
* os2: Platform macros. (line 14)
* patsubst: Patsubst. (line 9)
* popdef: Pushdef. (line 12)
* pushdef: Pushdef. (line 11)
* regexp: Regexp. (line 9)
* reverse: Loops. (line 32)
* shift: Loops. (line 17)
* sinclude: Include. (line 10)
* substr: Substr. (line 9)
* syscmd: Syscmd. (line 9)
* sysval: Sysval. (line 9)
* traceoff: Trace. (line 11)
* traceon: Trace. (line 10)
* translit: Translit. (line 9)
* undefine: Undefine. (line 9)
* undivert: Undivert. (line 9)
* unix: Platform macros. (line 16)
* upcase: Patsubst. (line 52)
* windows: Platform macros. (line 18)
Tag Table:
Node: Top864
Node: Preliminaries8278
Node: Intro9005
Node: History10637
Node: Invoking m413261
Node: Bugs22389
Node: Manual23655
Node: Syntax26587
Node: Names27584
Node: Quoted strings28034
Node: Comments28669
Node: Other tokens29508
Node: Input processing30056
Node: Macros31905
Node: Invocation32399
Node: Inhibiting Invocation33200
Node: Macro Arguments36715
Node: Quoting Arguments38613
Node: Macro expansion39845
Node: Definitions40513
Node: Define41297
Node: Arguments43216
Node: Pseudo Arguments44945
Node: Undefine47475
Node: Defn48605
Node: Pushdef50908
Node: Indir53242
Node: Builtin54170
Node: Conditionals55589
Node: Ifdef56303
Node: Ifelse57158
Node: Loops59915
Node: Debugging63787
Node: Dumpdef64372
Node: Trace65749
Node: Debug Levels68365
Node: Debug Output71153
Node: Input Control72334
Node: Dnl72872
Node: Changequote74682
Node: Changecom78157
Node: Changeword81088
Node: M4wrap85705
Node: File Inclusion87924
Node: Include88241
Node: Search Path90687
Node: Diversions91499
Node: Divert92737
Node: Undivert94932
Node: Divnum97656
Node: Cleardiv98115
Node: Text handling99274
Node: Len99997
Node: Index macro100382
Node: Regexp101153
Node: Substr103402
Node: Translit104453
Node: Patsubst106142
Node: Format109676
Node: Arithmetic111734
Node: Incr112183
Node: Eval112958
Node: Shell commands117367
Node: Platform macros118277
Node: Syscmd120006
Node: Esyscmd120975
Node: Sysval121900
Node: Maketemp123456
Node: Miscellaneous124172
Node: Errprint124603
Node: Location125403
Node: M4exit127601
Node: Frozen files129381
Node: Using frozen files130162
Node: Frozen file format133402
Node: Compatibility136465
Node: Extensions137080
Node: Incompatibilities140562
Node: Other Incompatibilities147468
Node: Answers149396
Node: Copying This Manual151742
Node: GNU Free Documentation License151970
Node: Indices174376
Node: Concept index174608
Node: Macro index185690
End Tag Table