# Copyright (C) 2002 Free Software Foundation, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
#
# Tests for Powerpc AltiVec register setting and fetching
if $tracelevel then {
strace $tracelevel
}
#
# Test the use of registers, especially AltiVec registers, for Powerpc.
# This file uses altivec-regs.c for input.
#
# APPLE LOCAL jmolenda
# r. 3067302 Altivec registers not being saved
set r3067302 "(r. 3067302)"
# r. 3067314 gcc generates unpleasant stabs data for vector types
set r3067314 "(r. 3067314)"
set prms_id 0
set bug_id 0
if [istarget "powerpc-*altivec"] {
set vrbase "vr"
set compile_flags { debug additional_flags=-w }
} elseif [istarget "powerpc-apple-*"] {
set vrbase "v"
set compile_flags { debug additional_flags=-w additional_flags=-faltivec }
} else {
verbose "Skipping altivec register tests."
return
}
set testfile "altivec-regs"
set binfile ${objdir}/${subdir}/${testfile}
set src1 ${srcdir}/${subdir}/${testfile}.c
if { [gdb_compile ${src1} ${binfile} executable ${compile_flags}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
#
# Run to `main' where we begin our tests.
#
if ![runto_main] then {
gdb_suppress_tests
}
# set all the registers integer portions to 1
for {set i 0} {$i < 32} {incr i 1} {
for {set j 0} {$j < 4} {incr j 1} {
gdb_test "set \$$vrbase$i.v4_int32\[$j\] = 1" "" "set reg $vrbase$i.v4si.f\[$j\]"
}
}
gdb_test "set \$vscr = 1" "" ""
gdb_test "set \$vrsave = 1" "" ""
# Now execute some target code, so that GDB's register cache is flushed.
gdb_test "next" "" ""
send_gdb "show endian\n"
gdb_expect {
-re "(The target endianness is set automatically .currently )(big|little)( endian.*)$gdb_prompt $" {
pass "endianness"
set endianness $expect_out(2,string)
}
-re ".*$gdb_prompt $" {
fail "couldn't get endianness"
}
timeout { fail "(timeout) endianness" }
}
# And then read the AltiVec registers back, to see that
# a) the register write above worked, and
# b) the register read (below) also works.
if {$endianness == "big"} {
set hex_vector ".uint128 = 0x00000001000000010000000100000001, v4_float = .0x0, 0x0, 0x0, 0x0., v4_int32 = .0x1, 0x1, 0x1, 0x1., v8_int16 = .0x0, 0x1, 0x0, 0x1, 0x0, 0x1, 0x0, 0x1., v16_int8 = .0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1.."
} else {
set hex_vector ".uint128 = 0x00000001000000010000000100000001, v4_float = .0x0, 0x0, 0x0, 0x0., v4_int32 = .0x1, 0x1, 0x1, 0x1., v8_int16 = .0x1, 0x0, 0x1, 0x0, 0x1, 0x0, 0x1, 0x0., v16_int8 = .0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0, 0x1, 0x0, 0x0, 0x0.."
}
if {$endianness == "big"} {
set decimal_vector ".uint128 = 0x00000001000000010000000100000001, v4_float = .1.*e-45, 1.*e-45, 1.*e-45, 1.*e-45., v4_int32 = .1, 1, 1, 1., v8_int16 = .0, 1, 0, 1, 0, 1, 0, 1., v16_int8 = ..0.0.0.001.0.0.0.001.0.0.0.001.0.0.0.001.."
} else {
set decimal_vector ".uint128 = 0x00000001000000010000000100000001, v4_float = .1.*e-45, 1.*e-45, 1.*e-45, 1.*e-45., v4_int32 = .1, 1, 1, 1., v8_int16 = .1, 0, 1, 0, 1, 0, 1, 0., v16_int8 = ..001.0.0.0.001.0.0.0.001.0.0.0.001.0.0.."
}
for {set i 0} {$i < 32} {incr i 1} {
gdb_test "info reg $vrbase$i" "$vrbase$i.*$decimal_vector" "info reg $vrbase$i $r3067302"
}
gdb_test "info reg vrsave" "vrsave.*0x1" "info reg vrsave $r3067302"
gdb_test "info reg vscr" "vscr.*0x1" "info reg vscr $r3067302"
# Now redo the same tests, but using the print command.
# Note: in LE case, the char array is printed WITHOUT the last character.
# Gdb treats the terminating null char in the array like the terminating
# null char in a string and doesn't print it. This is not a failure, but
# the way gdb works.
for {set i 0} {$i < 32} {incr i 1} {
gdb_test "print \$$vrbase$i" ".* = $decimal_vector" "print $vrbase$i (natural) $r3067302"
}
for {set i 0} {$i < 32} {incr i 1} {
gdb_test "print /x \$$vrbase$i" ".* = $hex_vector" "print $vrbase$i (hex) $r3067302"
}
gdb_test "print \$vrsave" ".* = 1" "print vrsave $r3067302"
gdb_test "print \$vscr" ".* = 1" "print vscr $r3067302"
if 0 {
for {set i 0} {$i < 32} {incr i 1} {
set pattern$i ".*$vrbase$i.*"
append pattern$i $decimal_vector
}
send_gdb "info powerpc altivec\n"
gdb_expect_list "info powerpc altivec" ".*$gdb_prompt $" {
[$pattern0]
[$pattern1]
[$pattern2]
[$pattern3]
[$pattern4]
[$pattern5]
[$pattern6]
[$pattern7]
[$pattern8]
[$pattern9]
[$pattern10]
[$pattern11]
[$pattern12]
[$pattern13]
[$pattern14]
[$pattern15]
[$pattern16]
[$pattern17]
[$pattern18]
[$pattern19]
[$pattern20]
[$pattern21]
[$pattern22]
[$pattern23]
[$pattern24]
[$pattern25]
[$pattern26]
[$pattern27]
[$pattern28]
[$pattern29]
[$pattern30]
[$pattern31]
"\[ \t\n\r\]+vscr\[ \t\]+0x1"
"\[ \t\n\r\]+vrsave\[ \t\]+0x1"
}
}
gdb_test "break vector_fun" \
"Breakpoint 2 at.*altivec-regs.c, line \[0-9\]+\\." \
"Set breakpoint at vector_fun"
# Actually it is nuch easier to see these results printed in hex.
gdb_test "set output-radix 16" \
"Output radix now set to decimal 16, hex 10, octal 20." \
"Set output radix to hex"
gdb_test "continue" \
"Breakpoint 2, vector_fun .a=.0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe., b=.0x1010101, 0x1010101, 0x1010101, 0x1010101.*altivec-regs.c.*vec_splat_u8.2..;" \
"continue to vector_fun"
# Do a next over the assignment to vector 'a'.
gdb_test "next" ".*b = \\(\\(vector unsigned int\\) vec_splat_u8\\(3\\)\\);" \
"next (1)"
# Do a next over the assignment to vector 'b'.
gdb_test "next" "c = vec_add \\(a, b\\);" \
"next (2)"
# Now 'a' should be '0x02020202...' and 'b' should be '0x03030303...'
gdb_test "print/x a" \
".*= .0x2020202, 0x2020202, 0x2020202, 0x2020202." \
"print vector parameter a"
gdb_test "print/x b" \
".*= .0x3030303, 0x3030303, 0x3030303, 0x3030303." \
"print vector parameter b"
# If we do an 'up' now, and print 'x' and 'y' we should see the values they
# have in main, not the values they have in vector_fun.
gdb_test "up" ".1.*main \\(\\) at.*altivec-regs.c.*z = vector_fun \\(x, y\\);" \
"up to main"
gdb_test "print/x x" \
".*= .0xfefefefe, 0xfefefefe, 0xfefefefe, 0xfefefefe." \
"print vector x"
gdb_test "print/x y" \
".*= .0x1010101, 0x1010101, 0x1010101, 0x1010101." \
"print vector y"
# now go back to vector_func and do a finish, to see if we can print the return
# value correctly.
gdb_test "down" \
".0 vector_fun \\(a=.0x2020202, 0x2020202, 0x2020202, 0x2020202., b=.0x3030303, 0x3030303, 0x3030303, 0x3030303.\\) at.*altivec-regs.c.*c = vec_add \\(a, b\\);" \
"down to vector_fun"
gdb_test "finish" \
"Run till exit from .0 vector_fun \\(a=.0x2020202, 0x2020202, 0x2020202, 0x2020202., b=.0x3030303, 0x3030303, 0x3030303, 0x3030303.\\) at.*altivec-regs.c.*in main \\(\\) at.*altivec-regs.c.*z = vector_fun \\(x, y\\);.*Value returned is.*= .0x5050505, 0x5050505, 0x5050505, 0x5050505." \
"finish returned correct value $r3067314"