# Copyright 1992, 1994, 1995, 1996, 1997, 1998, 1999, 2002, 2003
# Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
# Please email any bugs, comments, and/or additions to this file to:
# bug-gdb@prep.ai.mit.edu
# This file was written by Fred Fish. (fnf@cygnus.com)
if $tracelevel then {
strace $tracelevel
}
set prms_id 0
set bug_id 0
set testfile "list"
set binfile ${objdir}/${subdir}/${testfile}
# Need to download the header to the host.
remote_download host ${srcdir}/${subdir}/list0.h list0.h
if { [gdb_compile "${srcdir}/${subdir}/list0.c" "${binfile}0.o" object {debug}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
if { [gdb_compile "${srcdir}/${subdir}/list1.c" "${binfile}1.o" object {debug}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
if { [gdb_compile "${binfile}0.o ${binfile}1.o" ${binfile} executable {debug}] != "" } {
gdb_suppress_entire_file "Testcase compile failed, so all tests in this file will automatically fail."
}
# Create and source the file that provides information about the compiler
# used to compile the test case.
if [get_compiler_info ${binfile}] {
return -1;
}
#
# Local utility proc just to set and verify listsize
# Return 1 if success, 0 if fail.
#
set set_listsize_count 0;
proc set_listsize { arg } {
global gdb_prompt
global set_listsize_count;
incr set_listsize_count;
if [gdb_test "set listsize $arg" "" "setting listsize to $arg #$set_listsize_count"] {
return 0;
}
if { $arg <= 0 } {
set arg "unlimited";
}
if [gdb_test "show listsize" "Number of source lines.* is ${arg}.*" "show listsize $arg #$set_listsize_count"] {
return 0;
}
return 1
}
#
# Test display of listsize lines around a given line number.
#
proc test_listsize {} {
global gdb_prompt
global hp_cc_compiler
global hp_aCC_compiler
# Show default size
gdb_test "show listsize" "Number of source lines gdb will list by default is 10.*" "show default list size"
# Show the default lines
# Note that remote targets that have debugging info for _start available will
# list the lines there instead of main, so we skip this test for remote targets.
# The second case is for optimized code, it is still correct.
if [is_remote target] {
runto_main;
unsupported "list default lines around main";
} else {
gdb_test "list" "(1\[ \t\]+#include \"list0.h\".*10\[ \t\]+x = 0;|2.*11\[ \t\]+foo .x\[+)\]+;)" "list default lines around main"
}
# Ensure we can limit printouts to one line
if [set_listsize 1] {
gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"" "list line 1 with listsize 1"
gdb_test "list 2" "2\[ \t\]+" "list line 2 with listsize 1"
}
# Try just two lines
if [ set_listsize 2 ] {
gdb_test "list 1" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 1 with listsize 2"
gdb_test "list 2" "1\[ \t\]+#include \"list0.h\"\r\n2\[ \t\]+" "list line 2 with listsize 2"
gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+" "list line 3 with listsize 2"
}
# Try small listsize > 1 that is an odd number
if [ set_listsize 3 ] {
gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 1 with listsize 3"
gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*3\[ \t\]+int main \[)(\]+" "list line 2 with listsize 3"
gdb_test "list 3" "2\[ \t\]+\r\n3\[ \t\]+int main \[(\]+\[)\]+\r\n4\[ \t\]+\{" "list line 3 with listsize 3"
}
# Try small listsize > 2 that is an even number.
if [ set_listsize 4 ] then {
gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 1 with listsize 4"
gdb_test "list 2" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 2 with listsize 4"
gdb_test "list 3" "1\[ \t\]+#include \"list0.h\".*4\[ \t\]+\{" "list line 3 with listsize 4"
gdb_test "list 4" "2\[ \t\]+\r\n.*5\[ \t\]+int x;.*" "list line 4 with listsize 4"
}
# Try a size larger than the entire file.
if [ set_listsize 100 ] then {
gdb_test "list 1" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 1 with listsize 100"
gdb_test "list 10" "1\[ \t\]+#include \"list0.h\".*\r\n4\[23\]\[ \t\]+\}" "list line 10 with listsize 100"
}
# Try listsize of 0 which suppresses printing.
set_listsize 0
gdb_test "list 1" "" "listsize of 0 suppresses output"
# Try listsize of -1 which is special, and means unlimited.
set_listsize -1
setup_xfail "*-*-*"
gdb_test "list 1" "1\[ \t\]+#include .*\r\n39\[ \t\]+\}" "list line 1 with unlimited listsize"
}
#
# Test "list filename:number" for C include file
#
proc test_list_include_file {} {
global gdb_prompt
setup_xfail_format "COFF"
gdb_test "list list0.h:1" "1\[ \t\]+/\[*\]+ An include file .*10\[ \t\]+bar \\(x\\+\\+\\);" "list line 1 in include file"
setup_xfail_format "COFF"
gdb_test "list list0.h:100" "Line number 95 out of range; .*list0.h has 3\[67\] lines." "list message for lines past EOF"
}
#
# Test "list filename:number" for C source file
#
proc test_list_filename_and_number {} {
global gdb_prompt
set testcnt 0
send_gdb "list list0.c:1\n"
gdb_expect {
-re "1\[ \t\]+#include \"list0.h\".*10\[ \t]+x = 0;\r\n$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list0.c:1" ; gdb_suppress_tests }
timeout { fail "list list0.c:1 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list list0.c:10\n"
gdb_expect {
-re "5\[ \t\]+int x;.*14\[ \t\]+foo .x\[+)\]+;\r\n$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list.c:10" ; gdb_suppress_tests }
timeout { fail "list list.c:10 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list list1.c:1\n"
gdb_expect {
-re "1\[ \t\]+\#include.*4\[ \t\]+.*int oof\[ \t\]*\(.*\);\r\n.*$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list1.c:1" ; gdb_suppress_tests }
timeout { fail "list list1.c:1 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list list1.c:12\n"
gdb_expect {
-re "12\[ \t\]+long_line \[(\]+.*\[)\]+;.*13\[ \t\]+\}\r\n.*$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list1.c:12" ; gdb_suppress_tests }
timeout { fail "list list1.c:12 (timeout)" ; gdb_suppress_tests }
}
pass "list filename:number ($testcnt tests)"
gdb_stop_suppressing_tests;
}
#
# Test "list function" for C source file
#
proc test_list_function {} {
global gdb_prompt
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# SunPRO cc is the second case below, it's also correct.
gdb_test "list main" "(5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;|1\[ \t\]+#include .*10\[ \t\]+x = 0;)" "list function in source file 1"
# Ultrix gdb takes the second case below; it's also correct.
# SunPRO cc is the third case.
gdb_test "list bar" "(4\[ \t\]+void.*\[ \t\]*long_line.*;.*bar.*9\[ \t\]*.*|1\[ \t\]+void.*8\[ \t\]+\}|1\[ \t\]+void.*7\[ \t\]*long_line ..;|7\[ \t\]+void.*14\[ \t\]+\})" "list function in source file 2"
# Test "list function" for C include file
# Ultrix gdb is the second case, still correct.
# SunPRO cc is the third case.
gdb_test "list foo" "(3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;|2\[ \t\]+including file.*11\[ \t\]+bar \[(\]+.*\[)\]+;|1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;)" "list function in include file"
}
proc test_list_forward {} {
global gdb_prompt
set testcnt 0
send_gdb "list list0.c:10\n"
gdb_expect {
-re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list\n"
gdb_expect {
-re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list\n"
gdb_expect {
-re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list\n"
gdb_expect {
-re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
}
pass "successive list commands to page forward ($testcnt tests)"
gdb_stop_suppressing_tests;
}
# Test that repeating the list linenum command doesn't print the same
# lines over again. Note that this test makes sure that the argument
# linenum is dropped, when we repeat the previous command. 'x/5i $pc'
# works the same way.
proc test_repeat_list_command {} {
global gdb_prompt
set testcnt 0
send_gdb "list list0.c:10\n"
gdb_expect {
-re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list list0.c:10" ; gdb_suppress_tests }
timeout { fail "list list0.c:10 (timeout)" ; gdb_suppress_tests }
}
send_gdb "\n"
gdb_expect {
-re "15\[ \t\]+foo \[(\]+.*\[)\]+;.*24\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 15-24" ; gdb_suppress_tests }
timeout { fail "list 15-24 (timeout)" ; gdb_suppress_tests }
}
send_gdb "\n"
gdb_expect {
-re "25\[ \t\]+foo \[(\]+.*\[)\]+;.*34\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 25-34" ; gdb_suppress_tests }
timeout { fail "list 25-34 (timeout)" ; gdb_suppress_tests }
}
send_gdb "\n"
gdb_expect {
-re "35\[ \t\]+foo \\(.*\\);.*42\[ \t\]+.*\}\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 35-42" ; gdb_suppress_tests }
timeout { fail "list 35-42 (timeout)" ; gdb_suppress_tests }
}
pass "repeat list commands to page forward using 'return' ($testcnt tests)"
gdb_stop_suppressing_tests;
}
proc test_list_backwards {} {
global gdb_prompt
set testcnt 0
send_gdb "list list0.c:33\n"
gdb_expect {
-re "28\[ \t\]+foo \\(.*\\);.*37\[ \t\]+\}\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list list0.c:33" ; gdb_suppress_tests }
timeout { fail "list list0.c:33 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list -\n"
gdb_expect {
-re "18\[ \t\]+foo \[(\]+.*\[)\]+;.*27\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 18-27" ; gdb_suppress_tests }
timeout { fail "list 18-27 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list -\n"
gdb_expect {
-re "8\[ \t\]+breakpoint\[(\]\[)\];.*17\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 8-17" ; gdb_suppress_tests }
timeout { fail "list 8-17 (timeout)" ; gdb_suppress_tests }
}
send_gdb "list -\n"
gdb_expect {
-re "1\[ \t\]+#include .*7\[ \t\]+set_debug_traps\[(\]\[)\]+;\r\n$gdb_prompt $" { incr testcnt }
-re ".*$gdb_prompt $" { fail "list 1-7" ; gdb_suppress_tests }
timeout { fail "list 1-7 (timeout)" ; gdb_suppress_tests }
}
pass "$testcnt successive \"list -\" commands to page backwards"
gdb_stop_suppressing_tests;
}
#
# Test "list first,last"
#
proc test_list_range {} {
global gdb_prompt
gdb_test "list list0.c:2,list0.c:5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; filename:line1,filename:line2"
gdb_test "list 2,5" "2\[ \t\]+\r\n3\[ \t\]+int main \[)(\]+.*5\[ \t\]+int x;" "list range; line1,line2"
# gdb_test "list -1,6" "Line number 0 out of range; .*list0.c has 39 lines." "list range; lower bound negative"
# gdb_test "list -100,-40" "Line number -60 out of range; .*list0.c has 39 lines." "list range; both bounds negative"
gdb_test "list 30,45" "30\[ \t\]+foo \(.*\);.*43\[ \t\]+\}" "list range; upper bound past EOF"
gdb_test "list 45,100" "Line number 45 out of range; .*list0.c has 43 lines." "list range; both bounds past EOF"
gdb_test "list list0.c:2,list1.c:17" "Specified start and end are in different files." "list range, must be same files"
}
#
# Test "list filename:function"
#
proc test_list_filename_and_function {} {
global gdb_prompt
set testcnt 0
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# SunPRO cc is the second case below, it's also correct.
send_gdb "list list0.c:main\n"
gdb_expect {
-re "1\[ \t\]+#include .*10\[ \t\]+x = 0;\r\n$gdb_prompt $" {
incr testcnt
}
-re "5\[ \t\]+int x;.*14\[ \t\]+foo \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
pass "list function in source file 1"
}
-re ".*$gdb_prompt $" { fail "list list0.c:main" }
timeout { fail "list list0.c:main (timeout)" }
}
# Not sure what the point of having this function be unused is.
# AIX is legitimately removing it.
setup_xfail "rs6000-*-aix*"
send_gdb "list list0.c:unused\n"
gdb_expect {
-re "40\[ \t\]+unused.*43\[ \t\]+\}\r\n$gdb_prompt $" {
incr testcnt
}
-re "37.*42\[ \t\]+\}\r\n$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list0.c:unused" }
timeout { fail "list list0.c:unused (timeout)" }
}
clear_xfail "rs6000-*-aix*"
# gcc appears to generate incorrect debugging information for code
# in include files, which breaks this test.
# Ultrix gdb is the second case, one line different but still correct.
# SunPRO cc is the third case.
setup_xfail "rs6000-*-*" 1804
setup_xfail_format "COFF"
send_gdb "list list0.h:foo\n"
gdb_expect {
-re "2\[ \t\]+including file. This.*11\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
incr testcnt
}
-re "1\[ \t\]+/. An include file.*10\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
incr testcnt
}
-re "3\[ \t\]+.*12\[ \t\]+bar \[(\]+.*\[)\]+;\r\n$gdb_prompt $" {
incr testcnt
}
-re "No source file named list0.h.\r\n$gdb_prompt $" {
fail "list list0.h:foo"
}
-re ".*$gdb_prompt $" { fail "list list0.h:foo" }
timeout { fail "list list0.h:foo (timeout)" }
}
# Ultrix gdb is the second case.
send_gdb "list list1.c:bar\n"
gdb_expect {
-re "4\[ \t\]+void.*13\[ \t\]+\}\r\n$gdb_prompt $" {
incr testcnt
}
-re "4\[ \t\]+void.*12\[ \t\]*long_line ..;\r\n$gdb_prompt $" {
incr testcnt
}
-re "4\[ \t\]+void.*11\[ \t\]*\r\n$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list1.c:bar" }
timeout { fail "list list1.c:bar (timeout)" }
}
# Not sure what the point of having this function be unused is.
# AIX is legitimately removing it.
setup_xfail "rs6000-*-aix*"
send_gdb "list list1.c:unused\n"
gdb_expect {
-re "12\[ \t\]+long_line \[(\]\[)\];.*13\[ \t\]+\}\r\n.*$gdb_prompt $" {
incr testcnt
}
-re "14.*19\[ \t\]+\}\r\n.*$gdb_prompt $" {
incr testcnt
}
-re ".*$gdb_prompt $" { fail "list list1.c:unused" }
timeout { fail "list list1.c:unused (timeout)" }
}
clear_xfail "rs6000-*-aix*"
pass "list filename:function ($testcnt tests)"
# Test some invalid specs
# The following test takes the FIXME result on most systems using
# DWARF. It fails to notice that main() is not in the file requested.
setup_xfail "*-*-*"
# Does this actually work ANYWHERE? I believe not, as this is an `aspect' of
# lookup_symbol(), where, when it is given a specific symtab which does not
# contain the requested symbol, it will subsequently search all of the symtabs
# for the requested symbol.
gdb_test "list list0.c:foo" "Function \"foo\" not defined in .*list0.c" "list filename:function; wrong filename rejected"
gdb_test "list foobar.c:main" "No source file named foobar.c.|Location not found" "list filename:function; nonexistant file"
# APPLE LOCAL: expect text after "not defined"--our gdb outputs the filename
# here, unlike the FSF gdb.
gdb_test "list list0.h:foobar" "Function \"foobar\" not defined.*|Location not found" "list filename:function; nonexistant function"
}
proc test_forward_search {} {
global timeout
gdb_test "set listsize 4" ""
# On SunOS4, this gives us lines 19-22. On AIX, it gives us
# lines 20-23. This depends on whether the line number of a function
# is considered to be the openbrace or the first statement--either one
# is acceptable.
gdb_test "list long_line" "24\[ \t\]+long_line .*"
gdb_test "search 4321" " not found"
gdb_test "search 6789" "28\[ \t\]+oof .6789.;"
# Test that GDB won't crash if the line being searched is extremely long.
set oldtimeout $timeout
set timeout [expr "$timeout + 300"]
verbose "Timeout is now $timeout seconds" 2
gdb_test "search 1234" ".*1234.*" "search extremely long line (> 5000 chars)"
set timeout $oldtimeout
verbose "Timeout is now $timeout seconds" 2
}
# Start with a fresh gdb.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
if [target_info exists gdb_stub] {
gdb_step_for_stub;
}
gdb_test "set width 0" "" "set width 0"
test_listsize
get_debug_format
if [ set_listsize 10 ] then {
test_list_include_file
test_list_filename_and_number
test_list_function
test_list_forward
test_list_backwards
test_repeat_list_command
test_list_range
test_list_filename_and_function
test_forward_search
}
remote_exec build "rm -f list0.h"