2005-09-30 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-refile-msg, mh-tool-bar-reply-from)
(mh-tool-bar-reply-to, mh-tool-bar-reply-all)
(mh-alias-grab-from-field, mh-pack-folder): Image files moved to
etc/images/mail so added "mail/" prefix.
(mh-reply): Ditto. Also renamed reply2.* to reply.*.
(mh-rescan-folder): Ditto. Renamed image file to refresh.* since
it can be used in the general sense. Does not have "mail/"
prefix.
2005-09-29 Bill Wohler <wohler@newt.com>
Merged in changes from CVS Emacs including:
* mh-mime.el (mh-compose-forward, mh-mhn-compose-forw):
* mh-comp.el (mh-insert-letter):
* mh-utils.el (mh-prompt-for-folder):
Follow convention for reading with the minibuffer. Emilio C. Lopes
<eclig@gmx.net> 2005-09-24.
2005-09-26 Bill Wohler <wohler@newt.com>
* mh-e.el (desktop-buffer-mode-handlers): Only add to this list if
the variable exists. Not present pre-version 22.
Merged in changes from CVS Emacs including:
* mh-print.el (mh-ps-print-msg-show): Fix misplaced parenthesis in
previous change. Juanma Barranquero <lekktu@gmail.com> 2005-09-19
* mh-alias.el (mh-alias-ali): Fix `message' call: first arg
should be a format spec.
* mh-print.el (mh-ps-spool-buffer, mh-ps-spool-a-msg)
(mh-ps-print-msg, mh-ps-print-msg-show): Ditto.
* mh-mime.el (mh-toggle-mh-decode-mime-flag): Ditto.
* mh-index.el (mh-index-sequenced-messages): Ditto.
* mh-e.el (mh-refile-or-write-again, mh-page-msg): Ditto.
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist)
(mh-spamassassin-blacklist, mh-spamassassin-whitelist): Ditto. D
Goel <deego@gnufans.org> 2005-09-18.
* mh-customize.el: Do not use face-alias compatibility for
faces that did not appear in the previous Emacs release. Dan
Nicolaescu <dann@ics.uci.edu> 2005-08-15.
* mh-e.el: Add handler to desktop-buffer-mode-handlers.
(mh-restore-desktop-buffer): Remove autoload cookie.
(mh-folder-mode): Add autoload cookie. Lars Hansen
<larsh@soem.dk> 2005-08-10.
Update FSF's address in GPL notices Lute Kamstra <lute@gnu.org>
2005-07-04 .
* mh-customize.el (mh-folder-body-face, mh-folder-cur-msg-face)
(mh-folder-cur-msg-number-face): New backward-compatibility
aliases for renamed faces. Lute Kamstra <lute@gnu.org> 2005-06-17.
* mh-customize.el (mh-folder-body, mh-folder-cur-msg)
(mh-folder-cur-msg-number, mh-folder-date, mh-folder-followup)
(mh-folder-msg-number, mh-folder-refiled, mh-folder-subject)
(mh-folder-tick, mh-folder-to, mh-index-folder)
(mh-letter-header-field, mh-show-cc, mh-show-date)
(mh-show-header, mh-show-pgg-good, mh-show-pgg-unknown)
(mh-show-pgg-bad, mh-show-signature, mh-show-to, mh-show-from)
(mh-show-xface, mh-speedbar-folder, mh-speedbar-selected-folder)
(mh-speedbar-folder-with-unseen-messages)
(mh-speedbar-selected-folder-with-unseen-messages)
(mh-folder-msg-number, mh-folder-subject, mh-folder-followup)
(mh-folder-subject): Remove "-face" suffix from face names.
(mh-folder-body, mh-folder-cur-msg, mh-folder-cur-msg-number)
(mh-folder-date-face, mh-folder-followup-face)
(mh-folder-msg-number-face, mh-folder-refiled-face)
(mh-folder-subject-face, mh-folder-tick-face, mh-folder-to-face)
(mh-index-folder-face, mh-letter-header-field-face)
(mh-show-cc-face, mh-show-date-face, mh-show-header-face)
(mh-show-pgg-good-face, mh-show-pgg-unknown-face)
(mh-show-pgg-bad-face, mh-show-signature-face, mh-show-to-face)
(mh-show-from-face, mh-show-xface-face, mh-speedbar-folder-face)
(mh-speedbar-selected-folder-face)
(mh-speedbar-folder-with-unseen-messages-face)
(mh-speedbar-selected-folder-with-unseen-messages-face):
New backward-compatibility aliases for renamed faces.
(mh-folder-body-face, mh-folder-cur-msg-face)
(mh-folder-cur-msg-number-face, mh-folder-date-face)
(mh-folder-followup-face, mh-folder-msg-number-face)
(mh-folder-deleted-face, mh-folder-refiled-face)
(mh-folder-subject-face, mh-folder-address-face)
(mh-folder-scan-format-face, mh-folder-to-face)
(mh-index-folder-face, mh-show-cc-face, mh-show-date-face)
(mh-show-header-face, mh-show-pgg-good-face)
(mh-show-pgg-unknown-face, mh-show-pgg-bad-face)
(mh-show-to-face, mh-show-from-face, mh-show-subject-face)
(mh-speedbar-folder-with-unseen-messages)
(mh-speedbar-selected-folder-with-unseen-messages):
Use renamed MH-E faces.
* mh-utils.el (mh-letter-font-lock-keywords)
(mh-face-display-function): Use renamed MH-E faces.
* mh-speed.el (mh-folder-speedbar-buttons)
(mh-speed-update-current-folder, mh-speed-normal-face)
(mh-speed-bold-face, mh-speed-add-buttons)
(mh-speed-invalidate-map): Likewise.
* mh-mime.el (mh-signature-highlight): Likewise. Miles Bader
<miles@gnu.org> 2005-06-17.
* mh-comp.el (mh-send-sub):
* mh-identity.el (mh-identity-field-handler):
* mh-mime.el (mh-secure-message):
Don't use `format' on `error' arguments. Juanma
Barranquero <lekktu@gmail.com> 2005-06-16.
* mh-mime.el (mh-secure-message): Follow error conventions.
Juanma Barranquero <lekktu@gmail.com> 2005-06-14.
2005-09-24 Bill Wohler <wohler@newt.com>
* mh-unit.el (mh-unit): Changed lm-verify test to Emacs 22.
2005-09-22 Bill Wohler <wohler@newt.com>
* Makefile: Incorporated ideas from Clemens Fruhwirth to
generalize mh-loaddefs.el to make it work for both GNU Emacs and
XEmacs.
(EMACS_OPTIONS, XEMACS_OPTIONS): Use double-dash for all long
options.
(EMACS_LOADDEFS_COOKIE): New variable for generate-autoload-cookie
setting. Obsoletes XEMACS_LOADDEFS_COOKIE.
(EMACS_EXPORT_MH_LOADDEFS): New variable for GNU Emacs commands to
rebuild mh-loaddefs.el.
(XEMACS_EXPORT_MH_LOADDEFS): New variable for XEmacs commands to
rebuild mh-loaddefs.el. Obsoletes XEMACS_LOADDEFS_FILE and
XEMACS_LOADDEFS_PKG_NAME.
(MH-E-LOADDEFS-SRC): New variable which is set to $(MH-E-SRC) on
GNU Emacs, and adds $(MH-E-XEMACS-SRC) on XEmacs.
(all): Modify EMACS_EXPORT_MH_LOADDEFS and MH-E-LOADDEFS-SRC on
XEMacs.
(mh-loaddefs.el): Now depends on $(MH-E-LOADDEFS-SRC) and has
generic compile command that works on both GNU Emacs XEmacs.
(xemacs): Depend on autoloads instead of deleted loaddefs-xemacs.
(loaddefs-xemacs): Deleted.
2005-07-19 Bill Wohler <wohler@newt.com>
* README (INSTALL): Added info for Mac users.
2005-07-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-font-lock-field-data): Fix a bug where the
function would return t but match-data was being set to nil
(closes SF #1241017).
2005-07-12 Jeffrey C Honig <jch@honig.net>
* mh-customize.el (mh-invisible-header-fields-internal)
(mh-invisible-header-fields-internal): Add Received-SPF header and
X-Gmail- prefixes seen from Gmail.
2005-06-08 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-auto-fields): Inset identity regardless of
whether one was already set, since if one used a default identity
it would never be overridden (closes SF #1204506).
2005-06-02 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-customize): Use customization group mh-e.
* mh-init.el (mh-path): Use customization group mh-e. Thanks to
Peter Whaite for these patches (closes SF #1213716).
2005-06-01 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-compose-forward): Only use mh-sent-from-msg as a
default message if it's a number (as is done elsewhere).
Otherwise, an error is thrown if this function is called from a
draft created by mh-forward since this variable is a list. Also
added a space after the "Messages [%s]:" prompt.
2005-05-30 Jeffrey C Honig <jch@honig.net>
* mh-mime.el (mh-compose-forward): Allow insertion of multiple
forwarded messages by range (including sequences). For the sent
folder the default message presented is the sent message. For
other folders, the default message is "cur", if it exists.
2005-05-28 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Added +cvs to version.
2005-05-28 Bill Wohler <wohler@newt.com>
Released MH-E version 7.84.
* MH-E-NEWS, README: Updated for release 7.84.
* mh-e.el (Version, mh-version): Updated for release 7.84.
2005-05-28 Bill Wohler <wohler@newt.com>
* mh-e.el, mh-comp.el: Don't autoload Info-goto-node. It's not
used, and if it were, the code should use the info function
instead.
Use full year in copyright notices (for example, 2005, not 05).
* Makefile (mh-loaddefs.el, mh-e-autoloads.el): Added 2005 to
copyright notice.
* mh-inc.el: Use three ;;; to precede Local Variables to be
consistent with other files. Will have to ask Stefan Monnier why
he changed it.
* README: This version of MH-E to appear in GNU Emacs 22.1, not
21.5.
* ChangeLog: The * in a ChangeLog entry must only be used before a
filename.
Fixed compilation warnings in CVS Emacs. This included using
"public" functions instead of "private" ones (info instead of
Info-goto-node, view-mode-enter instead of view-mode), and
removing a customization group that didn't have a parent group. In
addition, string-to-int was recently deprecated; use
string-to-number instead.
* mh-customize.el (Info-goto-node): Deleted autoload.
(mh-e): Deleted mh group. Use single mh-e group instead.
(mh-tool-bar-folder-help, mh-tool-bar-letter-help): Use info
instead of Info-goto-node.
* mh-e.el (mh-read-msg-list): string-to-int deprecated; use
string-to-number.
* mh-funcs.el (mh-list-folders): Use view-mode-enter instead of
view-mode.
* mh-seq.el (mh-list-sequences): Use view-mode-enter instead of
view-mode.
* mh-utils.el (mh-get-msg-num): string-to-int deprecated; use
string-to-number.
Merged in changes from CVS Emacs including:
* mh-utils.el (mh-show-mode):
* mh-pick.el (mh-pick-mode): Remove spurious run-hooks. Lute
Kamstra <lute@gnu.org> 2005-05-26.
2005-05-25 Bill Wohler <wohler@newt.com>
Merged in changes from CVS Emacs including:
* mh-customize.el (mh-speedbar-selected-folder-face): Special case
high number of colors displays. Dan Nicolaescu <dann@ics.uci.edu>
2005-04-08.
* mh-e.el, mh-identity.el, mh-mime.el: Replace `legal' with
`valid'. Replace `illegal' with `invalid'. Werner Lemberg
<wl@gnu.org> 2005-03-25.
* mh-inc.el (mh-inc-spool-list): Correctly declare the external
var. Stefan <monnier@iro.umontreal.ca> 2004-09-07.
2005-05-18 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-reply): Mention use of mh-repl-group-formfile in
docstring.
2005-05-05 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Added +cvs to release number.
2005-05-05 Bill Wohler <wohler@newt.com>
Released MH-E version 7.83.
* MH-E-NEWS, README: Updated for release 7.83.
* mh-e.el (Version, mh-version): Updated for release 7.83.
2005-05-05 Bill Wohler <wohler@newt.com>
* README: To appear in Emacs 21.5, since 21.4 was released (but
without the latest MH-E).
* release-utils (usage): Added --variable-changes.
2005-05-04 Bill Wohler <wohler@newt.com>
* mh-customize.el (*-face): Made docstrings consistent.
* mh-seq.el (mh-pick-args-list): Extracted function for turning
string of pick arguments to list. Fixed list so that multi-word
arguments were put in a single string (closes SF #1122655).
(mh-edit-pick-expr): Use it.
* mh-unit.el (mh-unit): Since 21.4 snuck out but didn't contain
updated lm-verify, don't run lm-verify on versions before 21.5.
(mh-unit-test-pick-args-list): Added.
* mh-customize.el (mh-yank-from-start-of-msg): Use headline
capitalization. Changed wording of some choices to be more consistent.
(mh-invisible-header-fields-internal): Added fields from usa.net.
2005-04-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-mime-security-button-face): New function which
determines the face to use to colorize encrypted or signed emails.
(mh-insert-mime-security-button): Modified to colorize the button
differently based on whether the signature was valid or not,
whether the decryption was successful or not, etc.
* mh-customize.el (mh-show-pgg-good-face)
(mh-show-pgg-unknown-face, mh-show-pgg-bad-face): Faces added to
highlight buttons introduced for encrpted or signed MIME parts.
2005-03-19 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-mml-method-default): Sorted alphabetically.
(mh-insert-x-mailer-flag, mh-reply-show-message-flag): Moved from
mh-letter group to mh-sending-mail group. The writing of the
documentation revealed that these options were misplaced.
2005-03-17 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-junk-background): Put in alphabetical order.
Synced with manual.
(mh-junk-program): Use double-quotes on non-symbols.
* mh-pick.el: (mh-search-folder): Synced docstrings with manual.
* mh-index.el: (mh-index-search, mh-pick-execute-search)
(mh-grep-execute-search, mh-mairix-execute-search)
(mh-swish-execute-search, mh-swish++-execute-search)
(mh-namazu-execute-search): Synced docstrings with manual. Note
that I'm now grabbing the output of an Info buffer which is why
the indents on the examples has changed a bit. If we all use that
methodology in the future, we shouldn't produce as many gratuitous
diffs. I also noticed that `grep' and `search' became links to
unrelated things, so let's use double-quotes for quoting
non-symbols in the docstrings.
* mh-customize.el (mh-index-new-messages-folders)
(mh-index-ticked-messages-folders): Synced docstrings with manual.
2005-02-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-swish-execute-search): Simplify the indexing
recipe for swish. Thanks to Eric Jensen for the suggestion.
2005-02-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-swish-execute-search)
(mh-swish++-execute-search): Make the indexing recipes better.
(mh-swish-next-result): The indexer might find matches in files
that aren't messages. Make the function handle that case
gracefully.
2005-02-07 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-inc-prog, mh-inc-spool-list): Synced
docstrings with manual.
2005-02-06 Bill Wohler <wohler@newt.com>
* mh-junk.el (mh-spamassassin-blacklist): Removed trailing
whitespace.
* mh-e.el (mh-refile-or-write-again): Checkdoc fix.
* mh-identity.el (mh-identity-list-set)
(mh-identity-field-handler, mh-identity-handler-gpg-identity)
(mh-identity-handler-signature)
(mh-identity-handler-attribution-verb)
(mh-identity-handler-default, mh-identity-handler-top): Docstring
editing.
* mh-customize.el (mh-identity-list, mh-auto-fields-list)
(mh-identity-default, mh-identity-handlers): Synced docstrings
with manual.
2005-02-03 Bill Wohler <wohler@newt.com>
* mh-xemacs.el (define-behavior 'mh): Moved Ben's code here from
mh-e.el and added standard documentation.
* mh-e.el: Received patch from Ben Wing <ben@666.com> to add
define-behavior on XEmacs.
2005-01-28 Jeffrey C Honig <jch@honig.net>
* mh-customize.el (mh-invisible-header-fields-internal): Added
X-Evolution header added by Evolution mai client.
2005-01-18 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-invisible-header-fields-internal): Added
DomainKey-Signature (http://antispam.yahoo.com/domainkeys/).
There's a Comment field that goes with it, but I thought it was
too general to add.
2005-01-06 Bill Wohler <wohler@newt.com>
* mh-junk.el (mh-spamassassin-blacklist): Fixed typo to fix an
error when junking spamassassin mail when mh-junk-background is
turned on.
2004-12-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-unquote-From): Make the buffer writable
before trying to change it (closes SF #1089870).
* mh-comp.el (mh-complete-word): Fix a typo in a variable
name (closes SF #1089870)
2004-11-28 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-complete-word): Kill the *Completions* buffer in
any cases where we belive we are done with it. Not perfect, but
better than just leaving it around.
2004-11-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-acros.el (mh-funcall-if-exists): In XEmacs, presence of a
function at compile time doesn't guarantee it's existence at run
time. So make the macro handle that situation better.
2004-11-05 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-acros.el (advice): Load advice, since it isn't loaded in
XEmacs causing compilation problems.
2004-10-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-mairix-execute-search)
(mh-mairix-regexp-builder): Update the interface to mairix so that
it will work with versions of mairix 0.12 and later.
* mh-funcs.el (mh-rmf-daemon): Avoid using
beginning-of-buffer since it clobbers the mark and it was pointed
out on the Emacs developers list to be the wrong thing to do.
* mh-e.el (mh-inc-folder): Only remove the window on the show
buffer. This means if the user has BBDB enabled then the window
displaying BBDB information isn't clobbered.
(mh-refile-or-write-again): Don't use the function
interactive-p. There was a long thread on the Emacs developers
list where it was pointed out that it is incorrect to use this
function most of the time.
* mh-comp.el (autoload): Don't set auto-mode-alist. This could
screw things up for users that don't use MH-E (closes SF #1032353).
2004-10-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-refile-or-write-again): Generalize the function to
work on a range of messages (closes SF #1046330).
2004-09-02 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-process-commands): The concurrent execution of mark
and refile can cause problems since both the commands change the
current folder. This change avoids that by getting rid of the
concurrency. Another change covers the corner case where we refile
messages to a previously empty folder. Before the modification
sequences weren't preserved even if the appropriate flag was
set. That is no longer the case.
2004-08-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-get-new-mail): Also, update the unseen sequence from
disk. Otherwise, the new messages aren't highlighted.
* mh-seq.el (mh-thread-inc): Fix a bug which appears when inc is
run in a narrowed folder. The user sequence notation was getting
lost. The change fixes that.
* mh-e.el (mh-get-new-mail): Make inc more efficient by reusing
the existing user sequence notation and deleted/refiled notation.
2004-08-24 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Added +cvs to release number.
2004-08-24 Bill Wohler <wohler@newt.com>
Released MH-E version 7.82.
* MH-E-NEWS, README: Updated for release 7.82.
* mh-e.el (Version, mh-version): Updated for release 7.82.
2004-08-24 Bill Wohler <wohler@newt.com>
* mh-init.el (mh-variant-set): Change MH to mh as that's what is
emitted by `mh-variant-mh-info' (closes SF #1014781).
(mh-variant-p): Add mu-mh to docstring.
2004-08-23 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-acros.el (mh-require-cl): Remove unneeded autoloads.
(require): Add an advice to the function so that at compile time
the uncompiled file is loaded. This avoids compilation problems
when built in the Emacs tree.
* mh-mime.el (mh-identity-pgg-default-user-id): Defvar the
variable, to avoid compiler warnings.
* mh-e.el (mh-seq): Load mh-seq since functions defined there are
used here. Without this, the state mh-seq.elc would be loaded.
* mh-customize.el (mh-init, mh-identity): Load mh-init and
mh-identity at compile time manually, before the corresponding
stale elc files get autoloaded.
2004-08-21 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Add +cvs to release number.
2004-08-21 Bill Wohler <wohler@newt.com>
Released MH-E version 7.81.
* MH-E-NEWS, README: Updated for release 7.81.
* mh-e.el (Version, mh-version): Updated for release 7.81.
2004-08-21 Bill Wohler <wohler@newt.com>
* release-utils (variable_changes): Check for checked-out
directory before proceeding. Remove temporary files.
Rename --variable-update flag to --variable-changes.
2004-08-16 Mark D. Baushke <mdb@gnu.org>
* mh-mime.el (mh-toggle-mh-decode-mime-flag: New function.
* mh-e.el (mh-help-messages): Add [;] help string for it.
(mh-folder-mode-map): Add ";" key binding for it.
2004-08-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-acros.el (mh-defstruct): Distinguishing structures created
by mh-defstruct just based on the number of fields is not
sufficient, since both the mh-thread-message and
mh-thread-container structures have the same length.
2004-08-15 Mark D. Baushke <mdb@gnu.org>
* mh-customize.el (mh-identity-handlers): Use ":default" instead of
"default" to avoid problems with "Default:" as a user defined field.
* mh-identity.el (mh-identity-field-handler): Ditto.
2004-08-15 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Added +cvs to release number.
2004-08-15 Bill Wohler <wohler@newt.com>
Released MH-E version 7.4.80.
* MH-E-NEWS, README: Updated for release 7.4.80.
* mh-e.el (Version, mh-version): Updated for release 7.4.80.
2004-08-15 Bill Wohler <wohler@newt.com>
* mh-funcs.el, mh-gnus.el, mh-inc.el, mh-init.el, mh-junk.el,
mh-pick.el, mh-print.el, mh-xemacs.el: Added 2004 to Copyright.
* mh-acros.el, mh-alias.el: Checkdoc fixes.
2004-08-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-acros.el (cl): Load cl in this file. That is all right, since
this file is only used at compile time, and so cl doesn't get
loaded at run time. This avoids problems with stale *.elc files
present in the Emacs source tree during compilation.
(mh-defstruct): Modify it to make it more CL like and in the
process simplify it a bit. This makes the argument list of the
constructor compatible with the previous version, thereby avoiding
a compilation error when an old version of mh-seq.elc is present.
* mh-seq.el (mh-thread-id-container, mh-thread-get-message)
(mh-thread-get-message-container): Revert back to the CL style
of using keyword arguments, since the mh-defstruct now produces
code compatible to such usage.
2004-08-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-acros.el (mh-defstruct, mh-require-cl): Checkdoc fixes.
* mh-utils.el (message-tokenize-header, message-fetch-field): Add
autoloads.
(mh-folder-completing-read): Make the folder completion look
better with CVS Emacs.
* mh-init.el (mh-variant-set): Remove dead code.
2004-08-11 Bill Wohler <wohler@newt.com>
* *.el: Use the following at the top of each file which seems to
do a good job of suppressing compilation warnings in 21.3 and CVS
Emacs (21.4). This replaces (require 'cl) or (require
'utils) (mh-require-cl) calls:
(eval-when-compile (require 'mh-acros))
(mh-require-cl)
2004-08-10 Bill Wohler <wohler@newt.com>
* release-utils (DESCRIPTION): Added one.
(FILES, SEE ALSO, VERSION): Deleted empty and incorrect sections.
* mh-e.el (mh-colors-available-p): Call x-display-color-cells with
mh-funcall-if-exists since it no longer seems to be defined in
GNU Emacs 21.4.
2004-08-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-process-kill-without-query, mh-speed-flists):
Avoid a compiler warning in versions of Emacs where
process-kill-without-query is a deprecated function.
* mh-seq.el (mh-thread-message, mh-thread-container): Use
mh-defstruct instead of defstruct.
(mh-thread-id-container, mh-thread-get-message-container)
(mh-thread-get-message): Use the slightly different structure
constructor function.
* mh-acros.el (mh-defstruct): New macro which is a partial
replacement of the defstruct in CL.
(no-byte-compile): Don't compile the file since it isn't loaded at
run time, so efficiency isn't an issue.
* mh-utils.el (mh-buffer-data): Use mh-defstruct instead of
defstruct.
2004-08-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-funcs.el, mh-junk.el, mh-print.el: Use mh-require-cl to avoid
compilation warnings in Emacs-21.3.
* mh-acros.el (mh-require-cl): Add autoloads of CL functions used.
2004-08-09 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-show-use-xface-flag): Mention that `fetch' and
`curl' are supported as well.
2004-08-08 Bill Wohler <wohler@newt.com>
* mh-xemacs.el (mh-xemacs-has-toolbar-flag): Checkdoc fixes.
* mh-mime.el (mh-display-with-external-viewer): Checkdoc fixes.
* mh-identity.el: (mh-identity-attribution-verb-end): Stripped
trailing space; checkdoc fixes.
* mh-e.el (mh-restore-desktop-buffer): Checkdoc fixes.
* mh-customize.el: (mh-inc-spool-list,
mh-compose-forward-as-mime-flag, defcustom): Stripped trailing
space; checkdoc fixes.
* mh-comp.el (mh-reply): Stripped trailing space.
* mh-unit.el (mh-unit-files): Added mh-acros.el and mh-gnus.el.
(mh-unit): Don't lm-verify pre-21.4. Save buffers before killing
since we might have done some editing.
* import-emacs: Deleted. Functionality subsumed by release-utils.
* release-utils: New script. Performs import-emacs functionality
and displays new and deleted options.
* Makefile (import-emacs): Call release-utils instead of
import-emacs.
* mh-funcs.el (mh-undo-folder): Removed deprecated `ignore'
argument.
* mh-e.el (mh-scan-date-regexp): Deleted as Peter claims it is
obsolete.
(mh-folder-font-lock-keywords): Removed reference to deleted
variable `mh-scan-date-regexp'.
* mh-customize.el (mh-auto-fields-prompt-flag): Made reference to
`mh-auto-fileds-lists'.
(mh-forward-hook): Fixed docstring typo.
2004-08-07 Bill Wohler <wohler@newt.com>
* mh-acros.el: New file. Currently holds macros needed by
mh-customize.el but is planned to hold all macros to avoid
dependency problems when compiling.
* mh-utils.el (mh-xemacs-flag): Defined in mh-customize.el now.
(mh-require-cl, mh-do-in-gnu-emacs, mh-do-in-xemacs)
(mh-funcall-if-exists, mh-make-local-hook, mh-mark-active-p):
Moved to new file mh-acros.el.
* mh-customize.el: Require mh-acros and cl only when compiling and
mh-loaddefs at runtime instead of mh-utils.
(mh-xemacs-flag): Define it here instead of mh-utils.el.
* Makefile (MH-E-SRC): Added mh-acros.el.
* mh-gnus.el (default-enable-multibyte-characters): Don't define
any more. It doesn't seem to be needed.
* mh-customize.el (mh-junk-background): New variable. If on, spam
programs are run in background. Running in foreground can be slow.
Defaults to nil to spare machines with little memory.
* mh-junk.el (mh-spamassassin-blacklist, mh-bogofilter-blacklist)
(mh-bogofilter-whitelist, mh-spamprobe-blacklist)
(mh-spamprobe-whitelist): Use new option mh-junk-background.
2004-07-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-folder-completing-read): In recent CVS Emacs,
the first letter of the possible choices in the completion buffer
is highlighted. The change is needed for this feature to work
during folder name completion. This is not entirely sufficient,
since the leading "+" in folder names is still mishandled. A patch
is required in Emacs itself to address that.
2004-07-22 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (recursive-load-depth-limit): Move
recursive-load-depth-limit code to ...
* mh-utils.el (recursive-load-depth-limit): ... here to avoid
problems compiling mh-utils.el and mh-alias.el with gnus-5.10.6
under emacs-21.1. Use eval-and-compile instead of eval-when.
2004-07-20 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-invisible-header-fields-internal): Added
header fields emitted by T-Mobile picture phones (X-Mms-*, and
commented out X-Operator field saying it's like X-Mailer).
2004-07-12 Bill Wohler <wohler@newt.com>
* mh-gnus.el: Set local variables indent-tabs-mode and
sentence-end-double-space to nil.
* mh-customize.el: Checkpoint from option docstring updates and
manual synchronization from last summer. For the options listed
below, docstring was usually completely rewritten. Use "on"
instead of "t" in docstring to match what is seen in customization
buffer. Use headline capitalization. Standardize on "Auto-detect"
text when option has that capibility.
(mh): Since we work on more than one type of Emacs, use Emacs
instead of GNU Emacs. Prefer GNU mailutils over GNU Mailutils.
(mh-variant): s/Autodetect at startup/Auto-detect/.
(mh-alias-insertion-location): s/Sorted
alphabetically/Alphabetical/. s/At the top of file/Top/. s/At the
bottom of file/Bottom/.
(mh-alias-local-users-prefix): s/Use login instead of real
name/Use Login/.
(mh-identity-list): Sorted values by fields, attribution,
signature, GPG key.
(mh-auto-fields-list): Missing quote.
(mh-compose-insertion): s/Use Gnus/Gnus/. s/Use mhn/mhn/.
(mh-compose-space-does-completion-flag): s/SPACE/<SPC>/.
(mh-extract-from-attribution-verb): Since we have French, added
German too ;-).
(mh-letter-complete-function): Mention default in docstring.
(mh-invisible-header-fields-internal): Added X-ELNK-Trace from
Earthlink.
(mh-alias-flash-on-comma, mh-alias-insert-file)
(mh-alias-passwd-gecos-comma-separator-flag)
(mh-recenter-summary-flag, mh-default-folder-for-message-function)
(mh-default-folder-must-exist-flag, mh-index-program)
(mh-index-ticked-messages-folders, mh-ins-buf-prefix)
(mh-delete-yanked-msg-window-flag, mh-identity-default): See
summary above.
* mh-init.el (mh-variant-set, mh-sys-path, mh-variant-mu-mh-info):
Prefer GNU mailutils over GNU Mailutils MH.
* mh-comp.el (sc-cite-original, mh-smail, mh-smail-batch)
(mh-edit-again, mh-extract-rejected-mail, mh-forward)
(mh-smail-other-window, mh-reply, mh-send, mh-send-other-window):
Use `mh-send' instead of \\[mh-send]] since links in the docstring
are more useful than a key sequence in these cases. Use "See also"
instead of "See also documentation for".
Merged in 7.4.4 changes, described below.
* mh-e.el (Version, mh-version): Set to 7.4.4+cvs.
2004-07-10 Bill Wohler <wohler@newt.com>
Released MH-E version 7.4.4.
* MH-E-NEWS, README: Updated for release 7.4.4.
* mh-e.el (Version, mh-version): Updated for release 7.4.4.
This patch release contains the following patches:
* mh-xemacs.el: New file from concatenation of mh-xemacs-compat.el
and mh-xemacs-icons.el which were removed since their names
exceeded DOS 8+3 limits.
* Makefile:
(mh-e-autoloads.el): Add target to make `mh-e-autoloads.el', a
file containg usual entry commands into MH-E to be used for users
installing MH-E separately from Emacs.
(XEMACS_LOADDEFS_FILE): New. Used to generate mh-loaddefs.el
in XEmacs.
(XEMACS_LOADDEFS_COOKIE): Ditto.
(XEMACS_LOADDEFS_PKG_NAME): Ditto.
(XEMACS_OPTIONS): Add '-no-autoloads' to give a cleaner build
environment.
(MH-E-SRC): Moved mh-xemacs.el to new variable MH-E-XEMACS-SRC.
(MH-E-XEMACS-SRC): New variable to hold XEmacs source files.
(MH-E-XEMACS-OBJ): New variable to hold XEmacs object files.
(clean): Moved XEmacs-specific code to clean-xemacs.
(xemacs): Added clean-xemacs prerequisite. Moved down to XEmacs
section of file. Add target to build mh-loaddefs.el in XEmacs
(loaddefs-xemacs): New rule to build mh-loaddefs.el in XEmacs.
(clean-xemacs): New target to remove XEmacs-specific files.
(compile-xemacs): New. It allows for the '-no-autoloads' option
and byte-compiles all the source files with a single instance of
XEmacs.
(dist): Added $(MH-E-XEMACS-SRC) to tarball.
(AUTO_PRELOADS): Removed, in favour of 'AUTOLOAD_PACKAGE_NAME' and
'AUTOLOAD_FILE'.
(AUTOLOAD_PACKAGE_NAME): New.
(AUTOLOAD_FILE): New.
(all): Don't set $EMACS_HOME if building with XEmacs.
(xemacs): Use 'compile-xemacs' instead of 'compile'.
(auto-autoloads.elc): Use new $AUTOLOAD_* vars and allow for
'-no-autoloads'.
(custom-load.elc): Allow for '-no-autoloads'.
* mh-e.el: Don't require mh-xemacs-compat which no longer exists.
The XEmacs stuff gets required by mh-customize.el which is
required by mh-utils.el which is required by mh-e.el. This all
happens before mh-xemacs-compat was required, so all should be
well.
(mh-restore-desktop-buffer): Move from desktop.el. Add Parameters.
(mh-restore-desktop-buffer): Delete with-no-warnings.
(mh-folder-mode): Bind desktop-save-buffer to t.
(Courtesy Lars Hansen).
* mh-alias.el (mh-assoc-ignore-case): New macro to use
assoc-string when available (Emacs 21.4+); assoc-ignore-case
otherwise.
(mh-alias-reload, mh-alias-expand,
mh-alias-minibuffer-confirm-address): Use it.
* mh-seq.el: Added mh-autoload to mh-read-seq-default.
* mh-utils.el (mh-require-cl): The Emacs coding conventions
require that the cl package not be required at runtime. However,
the cl package in versions of Emacs prior to 21.4 left cl routines
in their macro expansions. Use mh-require-cl to provide the cl
routines in the best way possible (closes SF #930012).
(require 'mouse): To shush compiler.
Use new function mh-require-cl throughout.
Add arch taglines (courtesy Miles Bader).
* mh-unit.el (mh-unit-files): Replaced mh-xemacs-compat.el and
mh-xemacs-icons.el with mh-xemacs.el.
* import-emacs: Also grab the ChangeLog.
* *.pbm: Regenerated using GIMP to be consistent with other Emacs
icons.
1. Edit .xpm image in GIMP.
2. Image > Mode > Indexed. Check Use Black/White Palette and No
Color Dithering.
3. File > Save As file.xbm.
4. Run xbmtopbm < file.xbm > file.pbm.
Thanks to jan.h.d@swipnet.se for the help.
2004-07-07 Stephen Gildea
* mh-customize.el (mh-invisible-header-fields-internal):
Add X-Greylist, X-Source*, and X-WebTV-Signature.
Replace specific X-Spam-* headers with general pattern.
2004-06-15 Bill Wohler <wohler@newt.com>
* README: Vladimir Ivanovic reports that mh-rmail works with
XEmacs 21.5.17, so updated requirements text accordingly (closes
SF #644321).
2004-05-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-mail-header-end): Replace call to
rfc822-goto-eoh with something that allows From_ lines in the mail
header.
2004-04-14 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-show-mouse): s/EVENT/event/. Thanks to John Paul
Wallington <jpw@gnu.org> for pointing this out.
2004-04-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-folder-size-flist): Add -showzero option so that the
parsing code doesn't get confused by the presence of -noshowzero
in the user's .mh_profile (closes SF #933954).
2004-04-07 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-insert-mime-button)
(mh-insert-mime-security-button): Add evaporate property to
overlays used in MIME part buttons. This avoids problems with
CVS Emacs.
2004-03-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-folder-from-address): Go to the end of buffer if the
re-search-forward fails (closes SF #917096).
2004-02-02 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-compose-forward-as-mime-flag): New user
customizable variable that controls whether messages are forwarded
as MIME attachments (closes SF #827203).
* mh-comp.el (mh-forward): Call forw with -mime option only if
mh-compose-forward-as-mime-flag is non-nil.
2003-12-26 Jeffrey C Honig <jch@honig.net>
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist)
(mh-spamassassin-blacklist, mh-spamassassin-blacklist)
(mh-spamassassin-blacklist, mh-spamassassin-whitelist)
(mh-spamassassin-whitelist, mh-bogofilter-blacklist)
(mh-spamprobe-blacklist): Add progress messages. Change "Couldn't"
to "Unable" in error messages. Run bogofilter and spamprobe in
the foreground to prevent a large number of processes from
swamping the system.
2003-12-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-prompt-for-refile-folder): Marking the whole folder
and then refiling all messages throws an error, since this
function expects point to be on a valid scan line. The change
relaxes this requirement, thereby avoiding the above problem.
2003-12-14 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-ascii-buffer-p): New function that checks if a
buffer is entirely composed of ASCII.
(mh-send-letter): Encode the draft if it contains non-ASCII
characters.
2003-12-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-invisible-headers): Keep only unique fields
in list of header fields to hide. This avoids problems in XEmacs.
2003-12-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-print-scan-lines): The imenu index was not
getting created for threaded index buffers. The change fixes this.
* mh-index.el (mh-index-insert-folder-headers): Always create the
imenu index.
(mh-index-create-imenu-index): Set which-func-mode to t. If
which-function-mode is turned on after the folder buffer has been
prepared, display of the folder info was being inhibited. The
change fixes that.
2003-12-09 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-mode): Setup mh-mail-header-separator
based on draft contents.
(mh-letter-mode, mh-letter-mail-header-end-marker)
(mh-letter-header-end): Remove use of the variable
mh-letter-mail-header-end-marker. Instead use
mh-mail-header-separator. This avoids problems in font locking
draft buffers (closes SF #855479).
2003-12-09 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-insert-folder-headers): Modified so that
imenu--index-alist is updated.
(mh-index-create-imenu-index): New function that generates an
index usable by imenu. This adds which-func-mode support to index
folders (closes SF #855520).
* mh-e.el (which-func, which-func-modes): Tell which-func that
mh-folder-mode supports it.
(mh-folder-mode): Add support for imenu.
2003-11-22 Peter S Galbraith <psg@debian.org>
* Makefile: renamed mh-startup.el to mh-e-autoloads.el
* README: renamed mh-startup.el to mh-e-autoloads.el
* .cvsignore: Added mh-e-autoloads.el
2003-11-18 Bill Wohler <wohler@newt.com>
Released MH-E version 7.4.3.
* MH-E-NEWS, README: Updated for release 7.4.3.
* mh-e.el (Version, mh-version): Updated for release 7.4.3.
This patch release contains the following two patches:
* mh-identity.el (mh-identity-make-menu): Removed condition on
mh-auto-fields-list. Use it to enable or disable menu item
instead.
* mh-customize.el (mh-identity-list): Removed defvar and moved
defcustom before mh-auto-fields-list so that defvar wouldn't
clobber user's customization settings.
2003-11-17 Jeffrey C Honig <jch@honig.net>
* mh-print.el (mh-print-msg): Do not print a message on deprecated
usage, the bindings have been removed.
* mh-e.el (mh-folder-mode-map): Remove "l" binding for
mh-print-msg.
* mh-utils.el (mh-show-mode-map): Remove "l" binding for
mh-print-msg.
2003-11-16 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-beginning-of-word): Use the function
mh-mail-abbrev-make-syntax-table instead of the function
mail-abbrev-make-syntax-table.
* mh-gnus.el (mh-mail-abbrev-make-syntax-table): Add a wrapper
function that calls mail-abbrev-make-syntax-table if available.
This is needed so that MH-E built with CVS Emacs will work with
released versions of Emacs21 and vice versa.
2003-11-14 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-invisible-header-fields-internal): Add
"X-NAI-Spam-" and "X-Spam-Report:".
2003-11-14 Mark D. Baushke <mdb@gnu.org>
* mh-customize.el (mh-invisible-header-fields-internal):
Add X-AntiAbuse and X-MailScanner.
(Patch from Stephen Gildea.)
2003-11-13 Peter S Galbraith <psg@debian.org>
* mh-identity.el (mh-identity-handler-attribution-verb): New
function. A new Identity handler for the attribution verb (e.g.
"wrote:") to allow for different identities to use different
languages.
(mh-identity-insert-attribution-verb): New function. Insert the
attribution verb, placing special markers so it can be deleted and
replaced later.
(mh-identity-attribution-verb-start): New variable. Holds the
marker for the start of the attribution verb.
(mh-identity-attribution-verb-end): New variable. Holds the
marker for the end of the attribution verb.
* mh-customize.el (mh-identity-handlers): Add new
":attribution-verb" tag for the attribution-verb handler.
(mh-identity-list): Idem.
* mh-comp.el (mh-yank-cur-msg): Insert attribution verb using
mh-identity-insert-attribution-verb.
(mh-extract-from-attribution): Extract only the name from the From
line, without appending `mh-extract-from-attribution-verb' since
markers need to be inserted around that now.
2003-11-12 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-rmail, mh-nmail): Well, actually, we run in both GNU
Emacs and XEmacs, so removed the "GNU" in the docstrings unless
one is strictly talking about GNU Emacs.
* mh-comp.el (mh-smail, mh-smail-batch, mh-smail-other-window):
Ditto.
2003-11-11 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-customize): Minor docstring change.
(mh, mh-e): The short description for MH-E is: The GNU Emacs
Interface to the MH Mail System. Therefore, updated docstrings
accordingly.
* mh-comp.el (mh-smail, mh-smail-batch, mh-smail-other-window):
Ditto.
* mh-e.el (mh-rmail, mh-nmail): Ditto.
2003-11-10 Satyaki Das <satyakid@stanford.edu>
* mh-mime.el (mh-mml-to-mime): In case errors happen in
mml-to-mime, restore contents of the draft buffer (closes SF
#839303).
2003-11-07 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-letter-mode-hook): Moved to mh-sending-mail
group (where it is now documented in the manual).
(mh-pick-mode-hook): Moved to mh-index group (where it is now
documented in the manual).
* mh-loaddefs.el: Deleted per our discussion on mh-e-devel. No
more conflicts! No more check-ins! Anyone pulling CVS MH-E is
expected to compile. This file shall be added to the tarball so
that users of the distribution are not.
2003-11-07 Mark D. Baushke <mdb@gnu.org>
* mh-loaddefs.el: Regenerated.
* mh-customize.el (mh-forward-hook): Define new hook.
* mh-comp.el (mh-forward): Use it.
2003-11-07 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-show-toggle-mime-buttons)
(mh-show-display-with-external-viewer): New interactive functions
callable from the show buffer.
(mh-show-mime-map): Add bindings for "K t" and "K e".
(mh-show-msg): Propagate change to
mh-display-buttons-for-inline-parts-flag to the show buffer.
* mh-mime.el (mh-display-with-external-viewer): New interactive
function to display MIME parts with external viewer (closes SF
#839318).
* mh-e.el (mh-folder-mode): Make the variable
mh-display-buttons-for-inline-parts-flag buffer-local so that
display of MIME buttons can be toggled.
(mh-toggle-mime-buttons): New interactive function to toggle
display of MIME buttons.
(mh-mime-map): Modified to add bindings for "K t" and "K e".
2003-11-04 Steve Youngs <sryoungs@bigpond.net.au>
* Makefile (XEMACS_LOADDEFS_FILE): New. Used to generate
mh-loaddefs.el in XEmacs.
(XEMACS_LOADDEFS_COOKIE): Ditto.
(XEMACS_LOADDEFS_PKG_NAME): Ditto.
(xemacs): Add target to build mh-loaddefs.el in XEmacs
(clean-xemacs): Remove `mh-loaddefs.el*'
(loaddefs-xemacs): New rule to build mh-loaddefs.el in XEmacs.
2003-11-02 Peter S Galbraith <psg@debian.org>
* mh-init.el (mh-variant-set-variant): Reset `mh-x-mailer-string'
when we select an MH variant.
2003-11-02 Jeffrey C Honig <jch@honig.net>
* mh-loaddefs.el: Regenerated.
* mh-funcs.el (mh-print-msg): Move to mh-print.el.
* mh-e.el (mh-folder-mode-map): Add mh-print-msg ("l") back, it
will print a message that this usage is deprecated.
* mh-print.el (require, mh-ps-print-msg, mh-ps-print-msg-file):
Require mh-funcs for mh-note-printed. PS print functions were not
setting the printed notation. Move mh-print-msg here for
consistency. Print message if mh-print-msg invoked via deprecated
key binding.
2003-11-01 Peter S Galbraith <psg@debian.org>
* Makefile: Add target to make `mh-startup.el', a file containg
usual entry commands into MH-E to be used for users installing
MH-E separately from Emacs.
* README: Document the above for users.
2003-10-29 Jeffrey C Honig <jch@honig.net>
* mh-utils.el (mh-show-ps-print-map): Add "?" and "l" to
mh-show-ps-print-map.
* mh-e.el (mh-ps-print-map, mh-help-messages): Add "?" and "l" to
mh-ps-print-map. Add "l" to help message.
2003-10-27 Bill Wohler <wohler@newt.com>
* Makefile (MH-E-SRC): Moved mh-xemacs.el to new variable
MH-E-XEMACS-SRC.
(MH-E-XEMACS-SRC): New variable to hold XEmacs source files.
(MH-E-XEMACS-OBJ): New variable to hold XEmacs object files.
(clean): Moved XEmacs-specific code to clean-xemacs.
(xemacs): Added clean-xemacs prerequisite. Moved down to
XEmacs section of file.
(clean-xemacs): New target to remove XEmacs-specific files.
(compile-xemacs): Added $(MH-E-XEMACS-SRC) prerequisite.
(dist): Added $(MH-E-XEMACS-SRC) to tarball.
2003-10-27 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-index.el (mh-indexer-choices): Remove option for the non-free
glimpse indexer (closes SF #831276).
(mh-glimpse-binary, mh-glimpse-directory)
(mh-glimpse-execute-search, mh-glimpse-next-result): Functions
and variables to implement glimpse support are removed.
* mh-customize.el (mh-index-program): Remove option for glimpse.
2003-10-24 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el: Remove top-level test for toolbar enabled
XEmacs since it is not needed.
(mh-tool-bar-define): Add test for XEmacs toolbar in the functions
mh-toolbar-init, mh-tool-bar-letter-buttons-set and
mh-tool-bar-folder-buttons-set. This enables proper compilation
irrespective of whether the XEmacs was built with toolbar support
or not.
* mh-comp.el (mh-letter-mode): Remove conditional since it is not
needed.
* mh-e.el (mh-folder-mode): Same as above.
* mh-utils.el (mh-show-mode): Same as above.
* mh-xemacs.el (mh-xemacs-icon-map): Remove condition on toolbar
presence since we want the build to work if XEmacs without
toolbars is used during compilation.
2003-10-23 Bill Wohler <wohler@newt.com>
* mh-customize.el: The Great Reorganization. Sorted groups
alphabetically. Aligned variables in customization groups with
manual sections. Group docstrings changed to match manual chapter
titles.
2003-10-22 Satyaki Das <satyakid@stanford.edu>
* mh-speed.el (timer): Avoid compiler warning in XEmacs.
2003-10-22 Steve Youngs <sryoungs@bigpond.net.au>
* Makefile (XEMACS_OPTIONS): Add '-no-autoloads' to give a cleaner
build environment.
(AUTO_PRELOADS): Removed, in favour of 'AUTOLOAD_PACKAGE_NAME' and
'AUTOLOAD_FILE'.
(AUTOLOAD_PACKAGE_NAME): New.
(AUTOLOAD_FILE): New.
(all): Don't set $EMACS_HOME if building with XEmacs.
(xemacs): Use 'compile-xemacs' instead of 'compile'.
(auto-autoloads.elc): Use new $AUTOLOAD_* vars and allow for
'-no-autoloads'.
(custom-load.elc): Allow for '-no-autoloads'.
(compile-xemacs): New. It allows for the '-no-autoloads' option
and byte-compiles all the source files with a single instance of
XEmacs.
* mh-e.el (mh-folder-mode): Only load the toolbar in XEmacs if
toolbar support is available.
* mh-comp.el (mh-letter-mode): Only load the toolbar in XEmacs if
toolbar support is available.
* mh-customize.el: Require 'mh-xemacs' at toplevel when
'mh-xemacs-flag' is non-nil.
Wrap all the toolbar code in a test that is true if using
GNU/Emacs or a toolbar-enabled XEmacs.
* mh-print.el (mh-ps-spool-a-msg): Comment out
`clean-message-header-flag' because it isn't used anywhere.
* mh-utils.el (mh-show-mode): Only load the toolbar in XEmacs if
toolbar support is available.
* mh-xemacs.el: Autoload `regexp-opt', `customize-group',
`view-mode', `with-electric-help', `pp', `sort-numeric-fields',
`reverse-region', and `goto-address' at compile time.
(mh-xemacs-has-toolbar-flag): New. This is non-nil when XEmacs
has toolbar support.
(mh-xemacs-toolbar-*-icon): Use it.
2003-10-21 Mark D. Baushke <mdb@gnu.org>
* mh-identity.el (mh-identity-field-handler): Fields that begin
with ":" must have an mh-identity-handler defined or the user
gets an error.
2003-10-17 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-identity-list): This change affects users!
The keyword "signature" becomes ":signature". The recently added
keyword "pgg-default-user-id" becomes ":pgg-default-user-id".
(mh-auto-fields-list): The keyword "Identity" becomes ":identity".
(mh-identity-handlers): Idem for signature and pgg-default-user-id.
* mh-comp.el (mh-insert-auto-fields): Idem for Identity.
2003-10-17 Peter S Galbraith <psg@debian.org>
* mh-xemacs.el: Add eval-and-compile call to (load "toolbar" t t) to
make sure `toolbar-make-button-list' is defined. We can't use
require because Emacs doesn't have this library.
2003-10-16 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-signature-file-name)
(mh-letter-insert-signature-hook): Merge docstring with manual.
* mh-comp.el (mh-file-is-vcard-p): Checkdoc fix.
(mh-insert-signature): Merge docstring with manual.
* mh-customize.el (mh-junk): Changed manual link in defgroup from
Customizing mh-e to Junk.
(mh-junk-function-alist): Moved SpamAssassin to first in list on
the hunch that it is the most popular and should be chosen if
other anti-spam programs exist.
(mh-junk-mail-folder): Since the variable can accept values other
than folder names, renamed to mh-junk-disposition to more
accurately reflect the content. Merge docstring with manual.
(mh-junk-program): Moved SpamAssassin to the top of the menu for
the same reason presented in mh-junk-function-alist. Also, fixed
case of spam programs to match official usage. Merge docstring
with manual.
* mh-junk.el (mh-junk-blacklist):
s/mh-junk-mail-folder/mh-junk-disposition/. Merge docstring with
manual.
(mh-junk-whitelist): Merge docstring with manual.
(mh-bogofilter-blacklist): No longer suggest using automatic
classification so use -s instead of -Ns.
(mh-bogofilter-whitelist): No longer suggest using automatic
classification so use -n instead of -Sn.
(mh-spamassassin-blacklist, mh-spamassassin-whitelist): Merge
docstring with manual. Moved spamassassin functions to top of file
so functions appear in same order that they are presented in menu.
2003-10-09 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mail-citation-hook): Moved from mh-comp.el and
made into a defcustom.
2003-10-09 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-comp.el (mh-get-header-field): Add autoload cookie.
* mh-utils.el (mh-show-ps-print-toggle-mime)
(mh-show-ps-print-toggle-color, mh-show-ps-print-toggle-faces)
(mh-show-ps-print-msg-file, mh-show-ps-print-msg)
(mh-show-ps-print-msg-show): New interactive functions callable
from the show buffer.
(mh-show-ps-print-map): New key map for printing.
* mh-e.el (mh-folder-mode-map): Remove key binding for
mh-print-msg.
(mh-ps-print-map): Add new key map for printing.
* Makefile (MH-E-SRC): Add mh-print.el.
2003-10-07 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-x-image-url-fetch-image): In XEmacs,
make-temp-file is not present. So to avoid security problems, use
a temporary file in the user's home directory. This avoids issues
in creating files in a world-writable directory.
* mh-mime.el (mh-signature-highlight): In Emacs, arrange for the
overlay to be freed when it is no longer needed. Also, implement
signature highlighting in XEmacs.
2003-10-05 Satyaki Das <satyakid@stanford.edu>
* mh-mime.el (mh-mime-display, mh-mm-inline-message): Respect the
value of `mm-verify-option' and `mm-decrypt-option'.
(mh-mime-display-security): Rearrange code a bit to avoid too many
new lines being inserted when message verification/decryption is
carried out while the message is being read. Also use the
point-m{in|ax}-marker functions to make the function easier to read.
(mh-mime-security-press-button): Extend the function so that the
user can verify/decrypt messages while reading them.
* mh-gnus.el (mm-possibly-verify-or-decrypt): Added to avoid
compiler warning with old Gnus.
* mh-utils.el (mh-x-image-url-sane-p): New function which checks
if the URL in X-Image-URL is something we can handle.
(mh-x-image-url-display): Don't display image if the URL looks
malformed.
2003-10-04 Mark D Baushke <mdb@gnu.org>
* mh-comp.el (mh-letter-menu): Simplify menu heading.
2003-10-03 Mark D Baushke <mdb@gnu.org>
* mh-mime.el (mh-mml-query-cryptographic-method): Avoid
revisionist history and still provide a good default.
* mh-comp.el (mh-letter-menu): Remove the Disable Security
parenthetical comment.
* mh-loaddefs.el: Regenerated.
* mh-customize.el (mh-mml-method-default): What method should be
used in secure directives.
* mh-mime.el (mh-secure-message): New function used to generate
the mml security tags.
(mh-mml-unsecure-message): New wrapper function around
mml-unsecure-messages.
(mh-mml-secure-message-sign-pgpmime): Remove function.
(mh-mml-secure-message-encrypt-pgpmime): Ditto.
(mh-mml-cryptographic-method-history): New variable.
(mh-mml-query-cryptographic-method): New function.
(mh-mml-secure-message-encrypt): Ditto.
(mh-mml-secure-message-signencrypt): Ditto.
(mh-mml-secure-message-sign): Ditto.
* mh-comp.el (mh-letter-menu, mh-letter-mode-help-messages,
(mh-letter-mode-map): Update to use new functions.
2003-09-26 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-interactive-range): The function has been
extended so that it now takes a default result to return if no
interactive prefix arg is given and no region is active.
* mh-e.el (mh-add-sequence-notation): If transient-mark-mode is
on, then the active region is deactivated based on whether a user
sequence or a internal sequence is being notated. The change
removes this inconsistency.
(mh-catchup, mh-folder-map): A new interactive function to mark
messages as read has been added and bound to "F c" in the folder
mode.
* mh-utils.el (mh-show-catchup, mh-show-folder-map): New
interactive function callable from show mode buffers has been
bound to "F c".
2003-09-24 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-clean-message-header-flag)
(mh-invisible-header-fields-default, mh-invisible-header-fields):
Merge docstring with manual.
2003-09-24 Mark D. Baushke <mdb@gnu.org>
* mh-junk.el (mh-junk-blacklist): Junked messages should be put
into the mh-seen-list to avoid propagating the unseen sequence
into the spam folder.
* mh-loaddefs.el: Regenerated.
* mh-mime.el (mh-mml-secure-message-sign-pgpmime): Add an optional
dontsign argument to remove an existing secure message directive.
Update the docstring -- this fuction does not allow for
encrypt/sign, just sign directives.
* mh-mime.el (mh-mml-secure-message-sign-pgpmime): Use
mml-insert-tag directly to provide a sender if
mh-identity-pgg-default-user-id is set.
(mh-mml-secure-message-encrypt-pgpmime): Use mml-insert-tag
directly to provide a sender if this message is to be both signed
and encrypted and mh-identity-pgg-default-user-id is set.
2003-09-23 Bill Wohler <wohler@newt.com>
* mh-alias.el (Commentary): Removed as it is now in the manual.
(mh-alias-system-aliases): Moved here from mh-customize.el. By
definition, "system" definitions are not user-visible, and user
filenames are in the the Aliasfile: profile component, so this
variable really shouldn't be a defcustom
(mh-alias-tstamp, mh-alias-filenames, mh-alias-reload)
(mh-alias-add-alias, mh-alias-grab-from-field)
(mh-alias-add-address-under-point, mh-alias-apropos): Merge
docstring with manual.
(mh-alias-reload-maybe): Minor comment update.
(mh-alias-insert-file): Merge docstring with manual. Removed
"[press TAB]" from prompt since users should know about completion
and space can be used as well.
(mh-alias-for-from-p): No longer returns a surprising result (t if
there was **not** an alias for the From field) if the From header
field is missing. This function now returns what you would expect
a function of this name to return. Renamed from
mh-alias-from-has-no-alias-p since negatives in the function name
make logic harder to follow.
(mh-alias-add-alias-to-file): Merge docstring with manual.
Improved verbiage of prompt. Aliases are now inserted "[b]efore"
or "[a]fter" the existing alias instead of "[i]nsert" or
"[a]ppend." Note how the new usage flows better.
* mh-customize.el (mh-alias): Changed manual link in defgroup from
Customizing mh-e to Aliases.
(mh-alias-grab-from-field button): mh-alias-from-has-no-alias-p
renamed to mh-alias-for-from-p and no longer returns surprising
value if there isn't a From field. Therefore, enable button if
there is a From header field and mh-alias-for-from-p returns nil.
(mh-letter-complete-function)
(mh-alias-completion-ignore-case-flag, mh-alias-flash-on-comma)
(mh-alias-insert-file, mh-alias-insertion-location)
(mh-alias-local-users, mh-alias-local-users-prefix)
(mh-alias-passwd-gecos-comma-separator-flag): Merge docstring with
manual.
(mh-alias-system-aliases): Moved to mh-alias.el.
* mh-comp.el (mh-letter-complete-function-alist): Removed comment
about making this customizable since I didn't think it seemed
appropriate in the manual.
(mh-letter-complete): Merge docstring with manual.
2003-09-23 Satyaki Das <satyakid@stanford.edu>
* mh-speed.el (mh-speed-flists): When exiting emacs, don't ask if
the flists process should be killed.
* mh-e.el (mh-folder-message-menu): Enable undo menu entry only
if something can be undone.
* mh-customize.el (undo): Enable undo button only if something
can be undone.
2003-09-22 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-identity-handlers): New defcustom. Alist of
Handler functions for mh-identity (downcased) fields.
(mh-identity-list): Add support for pgg-default-user-id.
* mh-identity.el (mh-insert-identity): Modified to use
`mh-identity-handlers', adding hacking flexibility for those who
might need it.
(mh-identity-field-handler): New function. Return the handler for
a FIELD or nil if none set. The field name is downcased.
(mh-identity-handler-gpg-identity): New function; handler for pgg
pgp identities. It sets a buffer-local value for
`mh-pgg-default-user-id' which must be handled by mh-send-letter.
(mh-identity-pgg-default-user-id): New buffer-local variable to
hold the requested key ID.
(mh-identity-handler-signature): New function; handler t insert
and remove signature files.
(mh-identity-handler-default): New function; the default handler
to insert or remove generic field.
(mh-identity-handler-top): Insert a field at the top of the
header.
(mh-identity-handler-bottom): Insert a field at the bottom of the
header.
(mh-header-field-delete): Make more robust wrt the field having a
trailing colon or not.
(mh-identity-make-menu): Add a "Customize Identities" menu entry.
* mh-loaddefs.el: Regenerated.
2003-09-21 Peter S Galbraith <psg@debian.org>
* mh-init.el (mh-variant-set): Bug fix for mh-variant long names
with version numbers.
* mh-e.el (mh-scan-format): patch from Sergey Poznyakoff.
GNU mailutils now supports the %(decode) format
2003-09-20 Satyaki Das <satyakid@stanford.edu>
* mh-gnus.el (mh-mm-text-html-renderer): New function to query
which HTML renderer is being used by Gnus.
* mh-mime.el (mh-signature-highlight): Renderers used to display
HTML parts garble the signature separator in various ways. The
function has been modified to take that into account.
(mh-mime-display-single, mh-mm-display-part): Pass the new
optional argument to `mh-signature-highlight'.
2003-09-19 Mark D. Baushke <mdb@gnu.org>
* mh-mime.el (mh-have-file-command, mh-file-mime-type): Made an
mh-autoload as they are used in mh-comp.el.
* mh-loaddefs.el: Regenerated.
2003-09-18 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-fields): Make sure field has a colon.
2003-09-18 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-toggle-tick): Don't hardcode the name of the tick
sequencence in the function. This would have caused improper
highlighting of the tick sequence if the user had changed its
name.
2003-09-15 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-folder-message-menu): Fix a little bug which shows
up as a problem during compilation (closes SF #806577).
2003-09-15 Mark D. Baushke <mdb@gnu.org>
* mh-customize.el (mh-invisible-header-fields-internal): Added
a new field for GNU mailutils per Sergey Poznyakoff.
2003-09-09 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (vcard): Unconditionally load vcard.el, if
available, so that vcards are always inlined.
2003-09-09 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-file-mime-type-substitutions): Add entry to
convert text/plain .vcf files to text/x-vcard.
(mh-mime-content-types): Add text/x-vcard.
2003-09-09 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-rejected-letter-start): Added strings for qmail
and exim (addresses SF #404965).
2003-09-09 Satyaki Das <satyakid@stanford.edu>
* mh-gnus.el (mm-inline-text-vcard): Make vcard display work with
Gnus-5.9. The extra file vcard.el is still needed.
* mh-mime.el (mh-signature-highlight): New function that
highlights message signatures.
(mh-mm-display-part, mh-mime-display-single): Highlight signatures
using `mh-signature-highlight' (closes SF #802722). More work is
needed for XEmacs.
(mh-mime-display): Highlight signature in non-MIME email too.
* mh-customize.el (mh-show-signature-face): New face used to
display message signature.
2003-09-08 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-version): Do something sensible when
mh-variant-in-use is undefined.
* mh-junk.el (mh-spamassassin-blacklist)
(mh-spamassassin-whitelist): Change options to be compatoble with
old version of spamassassin (V2.20).
2003-09-07 Mark D. Baushke <mdb@gnu.org>
* mh-mime.el (mh-access-types): Per RFC 2049, the "afs"
access-type for message/external-body has been removed.
Update the comments to reference the current MIME RFCs
2045, 2046 and 2049 rather than the obsolete RFC 1521.
2003-09-05 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-version): Bumped version number to 7.4.2+cvs.
2003-09-04 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-picon-directory-list, mh-picon-directory): The
mh-picon-directory-list variable supersedes mh-picon-directory.
(mh-picon-existing-directory-list): New variable that contains
the list of picon directories that actually exist.
(mh-picon-set-directory-list): New function to update
mh-picon-existing-directory-list from mh-picon-directory-list.
(mh-picon-get-image): The function has been modified to search a
list of possible picon source directories. The regexp to extract
the username from the email address has been made smarter so that
it can recognize email addresses of the form user+random@foo.net
and extract "user" from there.
(mh-picon-file-contents): The file type recognition code has been
moved from mh-picon-get-image into this function.
(mh-picon-generate-path): The function has been generalized so
that searching multiple paths is now feasible.
* mh-pick.el, mh-e.el: Checkdoc fixes.
2003-09-02 Satyaki Das <satyakid@stanford.edu>
* mh-identity.el (eval-when): It seems that the mh-comp-loaded
code isn't required any more.
2003-08-30 Satyaki Das <satyakid@stanford.edu>
* mh-init.el (mh-variant-set): Replace `error' with `message' so
that Emacs CVS will compile without errors if no MH variant is
present.
2003-08-29 Satyaki Das <satyakid@stanford.edu>
* mh-init.el (mh-variant-set): Add interactive spec to the
function.
* mh-mime.el (mh-mhn-compose-external-type): Optional arguments
are prompted for only if prefix arg is given.
2003-08-29 Mark D. Baushke <mdb@gnu.org>
* mh-mime.el (mh-mhn-compose-external-type): Modified to be
interactive and prompts for many of the fields. Made an
mh-autoload.
(mh-access-types): New table derived from RFC2017, RFC1521 and
RFC1738, used in a completing-read in
mh-mhn-compose-external-type.
* mh-loaddefs.el: Regenerated.
2003-08-26 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-picon-image-types, mh-picon-get-image): Avoid
compiler warnings.
(mh-sub-folders-actual): Parsing of the output from folders has
been modified, so that it also works for MH (closes SF #792300).
* mh-junk.el (mh-spamassassin-whitelist): Avoid calling
ietf-drums-parse-address if it isn't present.
(mh-spamassassin-identify-spammers): Avoid use of puthash so that
Emacs20 doesn't complain.
* mh-e.el (mh-colors-available-p): Wrap call to
display-color-cells in a mh-funcall-if-exists to avoid compiler
warning in Emacs20.
2003-08-25 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-colors-available-flag, mh-folder-mode): New
variable to track if colors are available and it is set
appropriately in mh-folder-mode.
(mh-colors-available-p, mh-colors-in-use-p): Two functions to
check whether colors are available and if they are actually being
used.
(mh-add-sequence-notation): Just changing a scan line doesn't
make font-lock refontify the line in Emacs20. So explicitly
refontify the scan line in such a situation.
(mh-internal-seq): If colors aren't being used then treat the
tick sequence like a normal user sequence.
* mh-seq.el (mh-put-msg-in-seq): Do font-lock highlighting after
the messages have been added to the sequence.
(mh-toggle-tick): Modified so that highlighting of the ticked
messages will be properly done. If font-lock isn't being used or
if colors aren't supported by the Emacs where MH-E is running,
then the `%' character is used to annotate ticked messages.
* mh-utils.el (mh-picon-image-types): Since Emacs20 doesn't have
image-type-available-p, wrap calls to that function in
ignore-errors.
(mh-add-msgs-to-seq): Do the font-lock highlighting after the
messages have been added.
2003-08-24 Bill Wohler <wohler@newt.com>
* Makefile (MH-E-SRC): Replaced mh-xemacs-compat.el and
mh-xemacs-icons.el with mh-xemacs.el.
* mh-e.el: Don't require mh-xemacs-compat which no longer exists.
The XEmacs stuff gets required by mh-customize.el which is
required by mh-utils.el which is required by mh-e.el. This all
happens before mh-xemacs-compat was required, so all should be
well.
* mh-unit.el (mh-unit-files): Replaced mh-xemacs-compat.el and
mh-xemacs-icons.el with mh-xemacs.el.
* mh-xemacs.el: New file from concatenation of mh-xemacs-compat.el
and mh-xemacs-icons.el which were removed since their names
exceeded DOS 8+3 limits.
* mh-customize.el (mh-compose-skipped-header-fields): Use
uppercase for field names.
2003-08-21 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-sequences): Introduced new customization
group for sequences.
(mh-refile-preserves-sequences-flag, mh-tick-seq)
(mh-update-sequences-after-mh-show-flag): Moved option from
mh-folder to mh-sequences group. Synced docstring with manual.
(mh-index-ticked-messages-folders): Since mh-tick-seq is
customizable, use it instead of tick in the docstring.
* mh-index.el (mh-index-ticked-messages): Since mh-tick-seq is
customizable, use it instead of tick in the docstring.
* mh-seq.el (mh-msg-is-in-seq): Can now specify an alternate
message number with a prefix argument.
(mh-narrow-to-tick): Since mh-tick-seq is customizable, use it
instead of tick in the docstring. Also, use mh-tick-seq instead of
tick in warning message.
2003-08-20 Peter S Galbraith <psg@debian.org>
* mh-customize.el: setq mh-variant to 'none when byte-compiling,
since we don't care what MH variant (if any) is on the system at
that point.
* mh-init.el (mh-variant-set): Don't probe for MH variant when
mh-variant is set to'none (during byte-compilation).
2003-08-19 Peter S Galbraith <psg@debian.org>
* mh-pick.el (mh-pick-single-dash): New defconst. Search
components that are supported by single-dash option in
pick.
(mh-pick-regexp-builder): Use `mh-pick-single-dash' and adapt
patch from Sergey Poznyakoff.
* mh-comp.el (mh-reply): mu-mh supports `repl -group', thanks to
Sergey Poznyakof.
* mh-init.el: checkdoc fixes.
2003-08-19 Bill Wohler <wohler@newt.com>
* mh-seq.el: (mh-edit-pick-expr): Renamed from mh-read-pick-regexp
since the new name is more indicative of what the function does.
Prompt now says "Pick expression" instead of "Pick regexp".
(mh-narrow-to-subject): Rewrote function to behave like other
similar functions.
(mh-narrow-to-header-field, mh-narrow-to-range)
(mh-narrow-to-tick): s/regexp/pick-expr/.
(mh-widen, mh-narrow-to-from, mh-narrow-to-cc, mh-narrow-to-to):
Synced docstrings with manual
2003-08-19 Bill Wohler <wohler@newt.com>
Released MH-E version 7.4.2.
* MH-E-NEWS, README: Updated for release 7.4.2.
* mh-e.el (Version, mh-version): Updated for release 7.4.2.
* mh-e.el (mh-folder-size, mh-folder-size-folder)
(mh-folder-size-flist): If flist is not present use folder to find
the number of messages in the folder. Also the .mh_sequences file
is read to find the number of unseen messages (patch from 1.349
and branched for 7.4.2, closes SF #791021).
* mh-utils.el (mh-flists-present-flag, mh-find-progs): Introduce a
new variable to test for the presence of the flists program and
set it in mh-find-progs.
(mh-collect-folder-names): Use folders instead of flists. One
advantage is that folders is available on MH while flists is not.
Another is that if an explicit -sequence argument isn't given and
Unseen-Sequence profile is not present then flists croaks while
folders doesn't.
(mh-collect-folder-names-filter): Don't consider folder names that
start with a `.' character. This is needed since the folders
command doesn't filter them out like flists does.
(patches from 1.307 and 1.309 and branched for 7.4.2, closes SF
#791021).
2003-08-18 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-index-sequenced-messages)
(mh-index-new-messages, mh-index-ticked-messages): Updated
docstrings from manual (closes SF #718833).
* mh-customize.el (mh-variant): Checkdoc fix.
(mh-index-new-messages-folders): Don't mention defvar in
docstring, use `+inbox' instead.
(mh-index-ticked-messages-folders): Don't mention defvar in
docstring, use `tick' instead.
* mh-comp.el (mh-repl-group-formfile): Checkdoc fix.
2003-08-18 Peter S Galbraith <psg@debian.org>
* mh-init.el (mh-variant-set, mh-sys-path, mh-variant-info): Add
support for GNU mailutils.
(mh-variant-mu-mh-info): New function to detect mu-mh and return
info about it for `mh-variants'.
* mh-e.el (mh-regenerate-headers): mu-mh has different error
message for a invalid mesage list.
2003-08-18 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-e): New defgroup. Sort of an alias for the
'mh group that a user might be more likely to find.
2003-08-18 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-insert-auto-fields-done-local): Docstring tweak.
(mh-compose-and-send-mail): Do not call mh-insert-auto-fields.
This should be done only once in mh-send-letter.
2003-08-18 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-mode): Call `mh-find-path unconditionally,
like elsewehere in MH-E.
* mh-utils.el (mh-find-path): Run setup code only if
`mh-find-path-run' is nil such that this is only done once.
Also remove the `setq' for `read-mail-command' and `mail-user-agent'.
2003-08-18 Peter S Galbraith <psg@debian.org>
* mh-e.el: require 'mh-utils first
* mh-customize.el (mh-variant): defcustom moved here.
* mh-init.el (mh-variants): Made an mh-autoload.
2003-08-18 Peter S Galbraith <psg@debian.org>
* Makefile (MH-E-SRC): Added mh-init.el to MH-E-SRC.
* mh-utils.el (mh-find-progs): Deleted. Make obsolete by mh-init.el.
(mh-find-path): Call `mh-variants' instead of now obsolete
`mh-find-progs'.
(mh-path-search): Deleted. Was only used by `mh-find-progs'.
* mh-e.el: require mh-init.el.
(mh-version): Use simpler `mh-variant-in-use'.
(mh-scan-format): Use (mh-variant-p 'nmh) instead of mh-nmh-flag.
* mh-comp.el (mh-insert-x-mailer): Use simpler `mh-variant-in-use'.
* mh-utils.el (mh-progs, mh-lib, mh-lib-progs)
(mh-flists-present-flag): Moved to mh-init.el.
(mh-nmh-flag): Deleted. Use (mh-variant-p 'nmh) instead.
* mh-comp.el (mh-repl-group-formfile, mh-forward, mh-reply)
(mh-send-letter): Use (mh-variant-p 'nmh) instead of mh-nmh-flag.
* mh-mime.el (mh-edit-mhn, mh-mime-save-parts): Use (mh-variant-p
'nmh) instead of mh-nmh-flag.
2003-08-16 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-folder-selection): New group to hold
variables described in Folder Selection section in manual.
(mh-default-folder-list, mh-default-folder-must-exist-flag,
mh-default-folder-prefix): Moved to mh-folder-selection group.
Updated docstrings per manual update.
(mh-default-folder-for-message-function): New defcustom. Was a
defvar in mh-utils.el. Updated docstring per manual update.
* mh-utils.el (mh-default-folder-for-message-function): Moved to
mh-customize.el.
* mh-e.el (mh-folder-from-address, mh-prompt-for-refile-folder):
Updated docstrings per manual update.
* mh-unit.el (mh-unit-files): Added mh-init.el.
2003-08-16 Peter S Galbraith <psg@debian.org>
* mh-init.el: New file. Code to initialize the MH-E back-end.
Highlights:
(mh-variant): New defcustom. Users may customize `mh-variant' to
switch between available variants.
(mh-variants): Available MH variants are described in this variable.
(mh-variant-in-use, mh-variant-p): Developers may check which
variant is currently in use with the variable `mh-variant-in-use'
or the function `mh-variant-p'.
2003-08-15 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-auto-fields-list): The manual uses Fcc
instead of fcc, so I've changed the user-visible text
accordingly. I've left the const alone for backwards
compatibility.
2003-08-14 Bill Wohler <wohler@newt.com>
* mh-identity.el (mh-insert-identity): Changed signature deletion
test to test for both markers, rather than testing to see if the
start marker is bound. Since the start marker is defined in this
file, it should always be bound. Suggestion by Satyaki.
* mh-comp.el (mh-send-letter): Go to the top of the draft so that
the user can see which header fields have been inserted. I think
this is more important than leaving point alone or going to the
end to see the signature since Mail-Followup-To or Bcc or cc could
have some deleterious effects.
* mh-customize.el (mh-auto-fields-prompt-flag): New variable.
Non-nil means to prompt before sending if fields inserted.
* mh-comp.el (mh-insert-auto-fields): Now return t if fields
inserted; otherwise nil.
(mh-send-letter): Deleted obsolete documentation about adding
X-Mailer and X-Face. Prompt before sending if auto fields added
and mh-auto-fields-prompt-flag is t.
* mh-customize.el (mh-identity-list): Allow signature to come from
mh-signature-file-name. In this case, the "signature" value is set
to nil. This might not be the best implementation. Suggestions
welcome.
* mh-identity.el (mh-insert-identity): Now that the signature can
be a nil value, moved test higher up in cond so that the test for
a nil value would not be executed first prevening signature
handling. Handle nil signature value by calling
mh-insert-signature with no arguments which means to use
mh-signature-file-name.
* mh-comp.el (mh-insert-signature): Changed text of message if no
signature inserted.
* mh-customize.el (mh-identity-list): Changed "Signature" constant
back to "signature" so it *won't* be backwards-incompatible any
more. I discovered one could use the :tag keyword to get headline
captalization in the menu.
* mh-identity.el (mh-insert-identity): Ditto.
* mh-identity.el (mh-identity-make-menu): Always build menu.
Always create Insert Auto Fields menu item. Just don't enable it
if mh-auto-fields-list is nil. Enable radio buttons always. Make
None a radio button choice with the other identities.
* mh-comp.el (mh-letter-menu): Removed cond on fboundp
'easy-menu-define. We don't do this elsewhere.
2003-08-13 Bill Wohler <wohler@newt.com>
* mh-identity.el (mh-identity-make-menu, mh-insert-identity): Use
headline capitalization in menu items. Even the internal names are
exposed in the customize interface, so they need to be uppercase
too.
(mh-insert-identity): Rather than goto-char to
mh-identity-signature-start before deleting, simply pass it to
delete-region. When setting markers, use point-min-marker and
point-max-marker instead of moving point. Set marker type of
mh-identity-signature-start to t to fix a bug where changing
identity deleted user's text.
* mh-customize.el (mh-identity-list, mh-auto-fields-list):
Reworked docstring. Use headline capitalization. Commented out
implementation details for later deletion or resurrection upon
popular demand. N.B. If your mh-identity-list contains "signature"
then you will need to either edit your .emacs file manually, or
delete your existing "signature" which will become a regular field
with this change and create a new signature. I figured I could get
away with this since 8.0 is a major release, and coinciding with
the manual update will be a MAJOR release. I apologize profusely
that I didn't catch this before it was released.
(mh-identity-default): Use headline capitalization in example.
2003-08-12 Jeffrey C Honig <jch@honig.net>
* mh-customize.el (mh-alias-reloaded-hook): Define
`mh-alias-reloaded-hook'.
* mh-alias.el (mh-alias-reload): Run `mh-alias-reloaded-hook'
after reloading the aliases.
2003-08-12 Mark D. Baushke <mdb@gnu.org>
* mh-comp.el (mh-insert-signature): Use functionp to avoid
the possibility of doing a funcall on a void function.
2003-08-12 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-identity): Point group manual link to new
Identities section.
(mh-signature-separator-flag): New variable which can be used to
suppress the output of the signature separator.
* mh-comp.el (mh-insert-signature): Use
mh-signature-separator-flag.
* mh-identity.el (mh-insert-identity): If the identity's signature
file didn't exist, an fboundp error was thrown. This was fixed by
removing signature tests that were redundant and out of date with
the tests in mh-insert-signature. Removed second signature
condition as it is now handled in the first signature condition.
2003-08-12 Peter S Galbraith <psg@debian.org>
* mh-identity.el (mh-insert-identity): Don't insert new lines on
signatures anymore.
* mh-comp.el (mh-insert-signature): Make sure signature file is
readable before trying to insert it.
2003-08-11 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-insert-signature): Unconditionally insert a
newline so that signatures are inserted consistently, and so that
there isn't any text after the cursor so that the user can start
typing his message immediately. Use new variable and function
mh-signature-separator and mh-signature-separator-p.
* mh-customize.el (mh-delete-yanked-msg-window-flag): Checkdoc
fix.
(mh-signature-file-name): Updated docstring now that this variable
can be a function. Added cross-references to
mh-signature-separator, mh-signature-separator-regexp, and
mh-signature-separator-p which might be used in such functions.
* mh-identity.el (mh-insert-identity): Don't include signature if
signature separator already present. Useful when running
mh-edit-again.
* mh-mime.el (mh-inline-vcard-p): Use mh-signature-separator-p.
* mh-utils.el (mh-signature-separator-regexp): New variable
containing "^-- $" which should be used when looking for the
signature separator.
(mh-signature-separator): New variable containing "-- \n" which
should be used when inserting the signature separator.
(mh-signature-separator-p): New function that returns non-nil if
mh-signature-separator-regexp is found in the buffer.
2003-08-09 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-x-image-scaling-function): Variable that
contains function used to scale images. Possible choices are
mh-x-image-scale-with-convert and mh-x-image-scale-with-pnm.
(mh-convert-executable): Removed.
(mh-x-image-scale-with-pnm, mh-x-image-scale-with-convert): New
functions that scale images using pnm tools or ImageMagick.
(mh-x-image-scale-and-display, mh-x-image-url-display): Use
mh-x-image-scaling-function instead of mh-convert-executable.
2003-08-08 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-signature): Bug fix. Handle case of nil
`mh-signature-file-name' and hooks correctly.
* mh-identity.el (mh-insert-identity): Refactor to use
mh-insert-signature
* mh-comp.el (mh-signature-separator-p): Removed.
* mh-comp.el (mh-insert-signature): Merge MIME awareness from
mh-insert-identity into this command. Allow
`mh-signature-file-name' to be a function to call. See if "-- "
needs to be inserted only after hooks have run.
2003-08-07 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-compose-skipped-header-fields): Added
X-Image-URL.
(mh-autoload): Removed cookies. They aren't necessary in
mh-e.el, mh-utils.el, or mh-customize.el.
* mh-e.el (mh-autoload): Removed cookies. They aren't necessary in
mh-e.el, mh-utils.el, or mh-customize.el.
* mh-identity.el (mh-insert-identity): Made regexp for signature
separator more explicit. Hmmm, maybe we should create
mh-signature-separator-regexp...
* mh-index.el (mh-replace-string): Moved to mh-utils.el.
* mh-utils.el (mh-replace-string): Moved here from mh-index.el.
(mh-autoload): Removed cookies. They aren't necessary in mh-e.el,
mh-utils.el, or mh-customize.el.
* mh-comp.el (mh-insert-signature): Added file argument to insert
a file other than mh-signature-file-name. Insert signature
separator, unless file already contains one.
2003-08-06 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-folder-size, mh-folder-size-folder)
(mh-folder-size-flist): If flist is not present use folder to
find the number of messages in the folder. Also the .mh_sequences
file is read to find the number of unseen messages.
* mh-utils.el (mh-flists-present-flag, mh-find-progs): Introduce
a new variable to test for the presence of the flists program and
set it in mh-find-progs.
2003-08-06 Peter S Galbraith <psg@debian.org>
* mh-customize.el: Change the order of `mh-identity-list' and
`mh-auto-fields-list' and remove byte-compilation defvar for
`mh-identity-list'. This fixes a customization bug for
`mh-identity-list', where it wasn't set correctly.
* mh-identity.el (mh-identity-make-menu): mh-auto-fields-list may
not be bound yet when initially loaded.
2003-08-06 Bill Wohler <wohler@newt.com>
* mh-alias.el (mh-alias-add-address-under-point): Removed trailing
period from messages. The conventions say that errors should not
end with a period and that "Foo...done" messages should not end in
a period, but they aren't explicit about messages in general.
Given what the conventions *do* say, and because most of our
messages don't end with a period, let's just say that messages in
general don't end in a period, just like error messages.
* mh-comp.el (mh-extract-rejected-mail, mh-letter-mode-message):
Ditto.
* mh-e.el (mh-refile-a-msg): Ditto.
* mh-funcs.el (mh-undo-folder): Ditto.
* mh-mime.el (mh-mime-save-parts): Ditto.
* mh-seq.el (mh-subject-to-sequence-unthreaded)
(mh-narrow-to-subject, mh-delete-subject): Ditto.
* mh-index.el (mh-index-sequenced-messages)
(mh-index-new-messages, mh-index-ticked-messages): Discovered that
in general we should only use question marks in yes-or-no-p or
y-or-n-p prompts, but not in other prompts that use
completing-read and offer defaults. In these cases, use colons
instead (closes SF #730470).
* mh-mime.el (mh-mime-save-parts): Ditto.
* mh-utils.el (mh-prompt-for-folder): Ditto.
* mh-alias.el (mh-alias-apropos): Multiple messages are usually
shown one at a time rather than appended. Send output to
mh-aliases-buffer instead of *Help*.
(mh-alias-local-users): Checkdoc fix.
* mh-funcs.el (mh-undo-folder): Removed commented-out code since
its deadline had expired.
* mh-utils.el (mh-aliases-buffer): New buffer name, used in
mh-aliases.el.
2003-08-06 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-x-image-url-cache-canonicalize): Make this
function work for XEmacs too.
(mh-collect-folder-names): Use folders instead of flists. One
advantage is that folders is available on MH while flists is not.
Another is that if an explicit -sequence argument isn't given and
Unseen-Sequence profile is not present then flists croaks while
folders doesn't.
(mh-collect-folder-names-filter): Don't consider folder names that
start with a `.' character. This is needed since the folders
command doesn't filter them out like flists does.
* mh-index.el (mh-replace-string): Add autoload for it.
2003-08-05 Satyaki Das <satyakid@stanford.edu>
* mh-mime.el (mh-compose-forward, mh-mhn-compose-forw)
(mh-mml-forward-message): The variable mh-sent-from-msg can be a
list. So check that the value is really a number before using it
like one.
* mh-comp.el (mh-insert-letter): Same as above.
* mh-utils.el (mh-picon-get-image): Make the code that finds the
address of the sender more robust.
(mh-face-display-function): Make it work with XEmacs.
(mh-picon-image-types): A new variable that stores what image
types can be used.
2003-08-05 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el (mh-tool-bar-define): Make the save button such
that is activated only if the buffer needs to saved.
* mh-utils.el (mh-face-display-function, mh-picon-get-image): Some
domains, for instance cs.cmu.edu, don't have xpm files. So we need
to search for all three files. The change does that.
(mh-picon-file-contents): A utility function to return the
contents of a file as a string.
(mh-picon-get-image): Write it as a loop to make it simpler.
(mh-x-image-set-download-state): Make the link simpler.
2003-08-04 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-x-image-url-display): Don't bother to try to
download image if we don't have the necessary tools to display
it.
(mh-face-display-function): Add preliminary support for "domain"
picons.
(mh-picon-get-image, mh-picon-generate-path): Functions to find
best match for domain in the From header field.
* mh-e.el (mh-previous-unread-msg): If some of the messages in the
unseen sequence are not present in the folder buffer then calling
this function gets stuck and can't skip over them. The change
fixes this.
(mh-next-unread-msg): Same as above.
2003-08-04 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-show-mode): Added cross reference to
mh-folder-mode in docstring (closes SF #728638). Added
\\{mh-show-mode-map} to show keymap.
* mh-e.el (mh-folder-mode): Added information about ranges to
docstring (closes SF #728638).
* mh-speed.el (mh-speed-refresh): New function that calls
mh-speed-flists and mh-invalidate-map.
(mh-folder-speedbar-key-map): Replaced keybindings for
mh-speed-invalidate-map and mh-speed-flists with a single binding
for mh-speed-refresh.
(mh-folder-speedbar-menu-items): Replaced menu items for Run
Flists and Invalidate Cached Folders with the single menu item
Refresh Speedbar in order to simplify the UI.
* mh-customize.el (mh-fetch-x-image-url): Added DOS as another
reason not to set this to t.
2003-08-04 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-scan-folder): Handle ranges from user input properly.
2003-08-03 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-find-msg-get-num): Removed. If threading isn't
present, the messages are sorted by index. So `mh-goto-msg' was
implemented as a binary search and this function was used in that
implementation. So this isn't needed any more.
(mh-msg-search-pat): Removed. Before the advent of message
threading, this function was used to generate a regexp used to
search for a particular message. It isn't used anymore. The
variable `mh-scan-msg-number-regexp' should be updated and used in
`mh-goto-msg' instead of hardcoding the regexp in the code. Then
we might be able to better support other scan line formats in the
future.
* mh-seq.el (mh-map-to-seq-msgs, mh-notate-seq): Removed. These
functions were used to notate user sequences. But calling
`mh-goto-msg' inside of a loop is inefficient. So the sequence
notation code was rewritten thereby making these functions
redundant.
(mh-copy-line-to-point): Removed. This function was used in the
implementation the now removed function `mh-copy-seq-to-point'.
That function was problematic and was replaced by the less general
`mh-copy-seq-to-eob'. This makes `mh-copy-line-to-point'
redundant.
(mh-region-to-msg-list): Removed since this is a special case of
the more general `mh-range-to-msg-list'.
* mh-loaddefs.el: Regenerated.
2003-08-03 Jeffrey C Honig <jch@honig.net>
* mh-customize.el (mh-invisible-header-fields-default): Added
several new fields to hide. Sorted the list with sort-lines.
2003-08-03 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-invisible-headers): Variable renamed to
`mh-invisible-header-fields-compiled'.
(mh-invisible-headers): Implement above change.
* mh-utils.el (mh-display-msg): Idem.
* mh-mime.el (mh-mm-inline-message): Idem.
* mh-comp.el (mh-insert-letter): Idem.
2003-08-03 Bill Wohler <wohler@newt.com>
* mh-speed.el (mh-folder-speedbar-menu-items): Added separator
between standard and MH-E menu items. Use headline capitalization
in menu items.
* mh-utils.el (mh-temp-fetch-buffer): New constant to hold
buffer name for wget output.
(mh-x-image-url-fetch-image): Use mh-temp-fetch-buffer instead
of hard-coded buffer name. Use make-temp-file to avoid race
conditions and subsequent security issues raised in make-temp-name
docstring.
2003-08-03 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-wget-executable, mh-wget-choice, mh-wget-option)
(mh-x-image-url-fetch-image): Support the use of `curl' and
`fetch' as alternatives to `wget'.
(mh-wget-choice): Change order of search.
(mh-x-image-url-fetch-image): Rename buffer.
2003-08-03 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-x-image-set-download-state)
(mh-x-image-get-download-state): Specially named symbolic links
are used to keep track of whether a X-Image-URL header field needs
to downloaded the next time it is seen. These functions get and
set the symlinks appropriately.
(mh-x-image-url-fetch-image): Simplified since the query has been
moved to `mh-x-image-url-display'. Also if wget isn't present then
try again next time since the user might install wget before
trying once more.
(mh-x-image-scale-and-display): Handle absence of the `convert'
program better. If it isn't present then we will try to display
the image the next time it is encountered. Also use the -geometry
option to convert since the -resize option isn't present in older
versions.
(mh-x-image-url-display): Move all the code that decides whether
an X-Image-URL header field will be fetched in this function. Also
remember the user's decision so that if the image couldn't be
fetched the first time, we will try to fetch it later on without
asking again.
2003-08-02 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-local-users): Exclude all aliases already
in mh-alias-alist from `ali' (closes SF #772595).
2003-08-01 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-x-image-display, mh-x-image-url-display): Avoid
a race. The X-Image-URL is displayed asynchronously. Suppose a
message with a image is shown with `mh-show'. If a different
message is displayed before the image can be fetched, then the new
message will have the image displayed. With this change the race
is less likely to happen.
2003-08-01 Peter S Galbraith <psg@debian.org>
* mh-inc.el (mh-inc-spool-map): Fix what `mh-inc-spool-map-help'
must look like as a fake `mh-help-messages' in order to work
correctly in mh-help.
2003-07-31 Bill Wohler <wohler@newt.com>
* mh-inc.el (mh-inc-spool-map): Use mh-help instead of
mh-ephem-message in order to display help in its own buffer
instead of minibuffer.
* mh-utils.el (mh-help-buffer): New variable to hold the name of
the MH-E help buffer name.
* mh-funcs.el (mh-help, mh-prefix-help): Use with-electric-help to
display help messages. I observed a friend with a vision
disability and the 5 seconds the help appeared on the screen was
not long enough for him to lock on it. I've therefore changed the
help function to display the help in its own buffer called *MH-E
Help* (closes SF #493740 and SF #656631).
* mh-customize.el (mh-fetch-x-image-url): Changed default from nil
to 'ask. Updated docstring from manual.
(mh-invisible-header-fields-internal): Added X-Image-URL.
(mh-show-use-xface-flag): Updated docstring from manual.
(mh-x-face-file): Ditto.
* mh-mime.el (mh-mhn-compose-external-type): Don't insert the
directory parameter if it's nil. The mhbuild man page indicates
that this parameter is optional, so this should be fine.
* mh-comp.el (mh-letter-mode-map): Added keybindings for
mh-mhn-compose-anon-ftp and
mh-mhn-compose-external-compressed-tar.
(mh-letter-menu): Uncommented menu items for same.
2003-07-30 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-pick.el (mh-do-pick-search): Removed since the function
`mh-pick-do-search' performs the same action as this function.
* mh-index.el (mh-index-update-unseen): Removed since the
generalized sequence synchronization code that keeps sequences in
index folders in sync with the sequences in the source folders
makes this function redundant.
* mh-e.el (mh-folder-unseen-seq-name, mh-folder-unseen-seq-list):
Removed. These two functions were used in the unseen sequence
highlighting before the sequence highlighting code was
generalized. In any event calls to the function
`mh-folder-unseen-seq-name' can be replaced by the variable
`mh-unseen-seq' and calls to `mh-folder-unseen-seq-list' can be
replaced with (cdr (assoc mh-unseen-seq mh-seq-list)).
(mh-unmark-all-headers): Removed since this function has been
superseded by mh-remove-all-notation.
(mh-map-over-seqs): Removed since we now have the generalized
iteration over message ranges (the `mh-iterate-on-range' macro)
that can be used instead.
(mh-notate-if-in-one-seq): Removed. This function was used for
changing the `%' notation for user sequences. It can't be used for
that purpose any more, since we have a different scheme now.
* mh-unit.el (mh-unit-tests): Removed since it isn't needed any
more.
(mh-unit): Run all function that start with the string
"mh-unit-test-".
2003-07-30 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-invisible-header-fields): Checkdoc fix.
* mh-utils.el (mh-x-image-url-cache-canonicalize): Shortened using
example in files.el:make-backup-file-name-1.
(mh-face-display-function): Added X-Image-URL to docstring.
* mh-unit.el (mh-unit-x-image-url-cache-canonicalize): New
function to test mh-x-image-url-cache-canonicalize since it lent
itself well to unit testing. Had to start somewhere!
(mh-unit-equal): New function that throws an error if RESULT
doesn't equal EXPECTED.
(mh-unit): Call mh-unit-x-image-url-cache-canonicalize.
2003-07-29 Satyaki Das <satyakid@stanford.edu>
* mh-unit.el (mh-unit-update-call-graph): Make the function work
better with dotted lists, that is lists of the form (a b c . d)
where `d' isn't nil. With this we are able to avoid marking some
functions as unused even though they are actually used in alists.
2003-07-28 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-letter): Remove `mh-visible-headers'
operation.
* mh-mime.el (mh-mm-inline-message): Same.
* mh-utils.el (mh-display-msg): Same.
(mh-clean-msg-header): Make a note of above change.
* mh-customize.el (mh-invisible-header-fields-internal): Renamed
from prior `mh-invisible-header-fields-default'.
(mh-invisible-header-fields-default): Renamed from prior
`mh-invisible-header-fields-default-override'.
(mh-invisible-header-fields): Renamed from prior
`mh-invisible-header-fields-user'.
(mh-visible-headers): Removed! We use invisible fields only now.
(mh-visible-header-fields): Removed!
2003-07-28 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-invisible-header-fields-default): Added 3
new fields to hide.
2003-07-28 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-show): Add an extra argument to the function so
that interactive use will always force redisplay of the message.
* mh-mime.el (mh-mime-display, mh-mm-inline-message): Bind the
variables `mm-verify-option' and `mm-decrypt-option' so that
verification and decryption of mail can happen without any
additional tinkering.
2003-07-25 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-invisible-header-fields-default): New defvar
holding default fields to hide. This replaces the old
`mh-invisible-header-fields' defcustom.
(mh-invisible-header-fields-user): New defcustom. Users add
fields to suppress that we didn't include in
`mh-invisible-header-fields-default'. This could be named simply
`mh-invisible-header-fields' and it wouldn't really break anything
for users who have customized it to a long list now redundant with
`mh-invisible-header-fields-default'.
(mh-invisible-header-fields-default-override): New defcustom.
Users check off the fields they want displyed from what we
included in `mh-invisible-header-fields-default'.
(mh-invisible-headers): Function adapted to new variables.
2003-07-25 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-inc-folder): If the user is in a different folder
displaying a message and runs mh-inc-folder, then the folder
changes to +inbox but the show window continues to display the
message in the old folder. The change fixes this.
(mh-visit-folder): Make the handling of the show window similar to
that of mh-inc-folder.
2003-07-24 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-folder-message-menu, mh-folder-folder-menu): Use the
predicate mh-outstanding-commands-p instead of its exapansion.
Also use the same label in both menus.
(mh-outstanding-commands-p): Generalized so that it will work in
mh-show-mode buffers as well.
* mh-customize.el (mh-tool-bar-define): Enable tool-bar button for
mh-execute-commands only if there are pending deletes or refiles.
2003-07-19 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-show-msg): If a unseen message is first marked
for deletion/refiling and then displayed, the bold highlighting
does not go away. This change fixes that.
* mh-seq.el (mh-msg-is-in-seq): Fix a bug in the function. If any
message was marked for refiling, then the function would have you
believe that every message in the folder is being refiled.
2003-07-17 Bill Wohler <wohler@newt.com>
* mh-e.el: Removed email address for Stephen Gildea's in Change
Log at his request (damn spammers). Removed other email addresses
while I was at it since the SourceForge URL should be sufficient
contact information.
(mh-scan-format-*mh): Fixed typo in comment above these variables.
These variables are used if mh-scan-format-file is t, not nil.
Also mh-scan-format-file is no longer "above" (courtesy Stephen
Gildea).
2003-07-17 Satyaki Das <satyakid@stanford.edu>
* mh-mime.el (mh-mhn-quote-unescaped-sharp): New function that
quotes `#' characters in the first column that aren't part of a
MHN directive.
(mh-mhn-directive-present-p): Generalized to allow the function
to search for MHN directives in a part of the buffer.
(mh-edit-mhn): Quote unescaped `#' characters in the draft (closes
SF #762464).
2003-07-16 Satyaki Das <satyakid@stanford.edu>
* mh-alias.el (mh-alias-read-address-map): If
mh-alias-flash-on-comma is nil when mh-alias is loaded, then
setting mh-alias-flash-on-comma to t later on doesn't turn on
address completion display till Emacs is restarted. The change
fixes this.
2003-07-15 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-cmd-note): Cleaned up docstring (changed phrase
to sentences). Moved to Scan Line Formats section.
(mh-scan-msg-number-regexp)
(mh-scan-msg-overflow-regexp, mh-scan-msg-format-regexp)
(mh-scan-msg-format-string, mh-scan-msg-search-regexp): Cleaned up
docstrings (changed phrases to sentences).
(mh-note-seq): Cleaned up docstring (changed phrase to sentences).
Also, this variable is now a character and not a string. Moved to
Scan Line Formats section.
* mh-funcs.el (mh-note-copied, mh-note-printed): Cleaned up
docstrings (changed phrases to sentences). Also, these variables
are now characters and not strings.
* mh-e.el (mh-scan-format-mh, mh-scan-format-nmh): Filled. I was
hoping to quote the hint `t' but checkdoc wouldn't let me.
(mh-note-deleted, mh-note-refiled, mh-note-cur): Moved to Scan
Line Formats section.
(mh-scan-good-msg-regexp, mh-scan-deleted-msg-regexp)
(mh-scan-refiled-msg-regexp, mh-scan-valid-regexp)
(mh-scan-cur-msg-number-regexp, mh-scan-date-regexp)
(mh-scan-rcpt-regexp, mh-scan-body-regexp)
(mh-scan-subject-regexp, mh-scan-format-regexp): Cleaned
up docstrings (changed phrases to sentences).
(mh-scan-cur-msg-regexp): Marked this variable as obsolete; it
should be removed for 8.0.
* mh-comp.el (mh-note-repl, mh-note-forw, mh-note-dist): Cleaned
up docstrings (changed phrases to sentences). Also, these
variables are now characters and not strings.
2003-07-15 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-update-single-msg)
(mh-index-create-sequences): Handle the situation where there are
copies of the exact same message correctly.
2003-07-15 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-thread-update-scan-line-map): Modified since
notation is already a character.
* mh-utils.el (mh-note-seq): Convert from string to character.
(mh-notate): Modified since characters are used to notate instead
of strings of length one.
* mh-comp.el (mh-note-repl, mh-note-forw, mh-note-dist): Convert
from string to characters.
* mh-e.el (mh-note-deleted, mh-note-refiled, mh-note-cur): Same as
above (closes SF #770772).
(mh-unmark-all-headers): Modified since mh-note-* variables are
now characters.
(mh-remove-sequence-notation): The mh-notate function remembers
the previous notation. Before the change to the mh-note-*
variables, mh-notate would only remember the change if a string
was used to notate the message. Now mh-notate is always called
with a character notation. So the deletion has to take place
explicitly.
2003-06-28 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-mhn-directive-present-p): If shell comments are
present that have a space after the # but no content, then this
function would throw an error. This has been fixed (closes SF
#762458).
2003-06-27 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-search): Use the new and improved
mh-index-new-folder.
(mh-index-new-folder): Improved so that redoing the same search
will reuse the old index folder.
(mh-index-folder-search-regexp): New function which that extracts
out the search expression that produced the index folder.
2003-06-24 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Set to 7.4.1+cvs.
2003-06-25 Bill Wohler <wohler@newt.com>
Released MH-E version 7.4.1.
* MH-E-NEWS, README: Updated for release 7.4.1.
* mh-e.el (Version, mh-version): Updated for release 7.4.1.
2003-06-25 Bill Wohler <wohler@newt.com>
* mh-unit.el (require 'cl): Added. Needed when compiling
separately.
* Makefile (clean): Now a double-colon rule. Added a second clean
target to remove mh-unit.elc.
(compile): Removed mh-unit.elc.
(mh-unit.elc): New target used to compile mh-unit.
2003-06-24 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Set to 7.4+cvs.
2003-06-24 Bill Wohler <wohler@newt.com>
Released MH-E version 7.4.
* MH-E-NEWS, README: Updated for release 7.4.
* mh-e.el (Version, mh-version): Updated for release 7.4.
2003-06-24 Bill Wohler <wohler@newt.com>
* mh-alias.el (mh-alias-gecos-name, mh-alias-local-users)
(mh-alias-suggest-alias): s/gcos/gecos. The original acronym was
GECOS but was later renamed to GCOS (see
http://info.astrian.net/jargon/terms/g/GCOS.html). But the term
really needs to match the field named pw_gecos in struct passwd in
/usr/include/pwd.h
* mh-customize.el (mh-letter-faces): New group to house
mh-letter-header-field-face.
(mh-interpret-number-as-range-flag)
(mh-kill-folder-suppress-prompt-hook): Use "you" instead of "the
user" to make text more friendly.
(mh-index-ticked-messages-folders, mh-visible-headers)
(mh-visible-header-fields): Alphabetized.
(mh-alias-passwd-gcos-comma-separator-flag): Alphabetized and
s/gcos/gecos.
(mh-alias-local-users-prefix): Fixed docstring. Prefixes are
prepended, not appended. Additional checkdoc fix.
(mh-letter-header-field-face): Set group to new group
mh-letter-faces and moved option into this group.
* mh-index.el (mh-index-sequenced-messages): Improved wording of
docstring and mentioned use of prefix argument.
* mh-seq.el (mh-widen): Made docstring more accurate (hopefully!).
2003-06-18 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-replace-string): Modified to preserve case of
replacement text.
(mh-index-parse-search-regexp): Preserve case of search terms.
This is needed to take advantage of the acronym indexing in
swish++ (closes SF #755718).
2003-06-13 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-show-index-sequenced-messages): Interactive
function callable from the show buffer.
(mh-show-folder-map): Add key binding for "F q".
* mh-e.el (mh-folder-map): Same as above.
* mh-index.el (mh-index-sequenced-messages): Add interactive spec
to the function (closes SF #718833).
2003-06-13 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-flists-execute): Needed to expand mhpath too.
2003-06-12 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-flists-execute): Modified so that flists
present in mh-progs is called.
2003-06-07 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-forward, mh-forward): Use (mh-mail-header-end) to
find the end of headers instead of doing an re-search-forward
based on mh-mail-header-separator.
2003-06-06 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-toggle-header-field-display): Make the
function callable from the show buffer. This means that the
buffer is temporarily made writable and the modification status
of the buffer restored to the original value.
2003-06-06 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-address-mail-regexp): Bug fix! It wasn't a true
copy of the goto-addr variable. My modification only recognized
addresses with one dot after the @. Sorry about that.
2003-06-05 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-replace-in-string): Move comment into doc
string to satisfy checkdoc.
* mh-alias.el (mh-alias-apropos): Checkdoc fix.
2003-06-05 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-identity-list): Fixed typo in docstring.
2003-06-05 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-complete-function-alist): Add bcc an reply-to.
2003-06-04 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-complete-function-alist): Add dcc.
2003-06-03 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-replace-in-string): New function name instead of
`dired-replace-in-string'.
* mh-alias.el (mh-alias-gcos-name): Use it.
* mh-alias.el (mh-alias-apropos): New command. Show all aliases
that match REGEXP either in name or content.
* mh-alias.el (mh-alias-suggest-alias): Add no-comma-swap optional
arg.
(mh-alias-canonicalize-suggestion): Change a comma to a period in
created aliases.
(mh-alias-local-users): Call `mh-alias-suggest-alias' with
`no-comma-swap' arg set to t.
* mh-alias.el (mh-alias-local-users): Fix case of nil
`mh-alias-passwd-gcos-comma-separator-flag'.
* mh-alias.el (mh-alias-gcos-name): Fix for case of empty gcos
name field.
(mh-alias-local-users): Fix same.
* mh-alias.el (mh-alias-canonicalize-suggestion): Replace use by
verbose `replace-regexp' by a looped `replace-match'
2003-06-02 Peter S Galbraith <psg@debian.org>
* mh-utils.el (dired-replace-in-string): Bind if not already
defined. Borrowed from dired.el
* mh-alias.el (mh-alias-gcos-name): switch to using
dired-replace-in-string.
2003-06-02 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-letter-font-lock-keywords): Fontify header
fields in the draft buffer that aren't skipped when navigating
with TAB (or S-TAB).
* mh-customize.el (mh-clean-message-header-flag)
(mh-invisible-headers, mh-invisible-header-fields)
(mh-alias-passwd-gcos-comma-separator-flag): Checkdoc fix.
(mh-letter-header-field-face): New face to fontify the header
fields.
* mh-comp.el (mh-insert-auto-fields-done-local): Checkdoc fix.
(mh-letter-mode, mh-letter-mail-header-end-marker): Remember the
end of the message header in a marker. This is used to fontify the
header fields.
(mh-font-lock-field-data, mh-letter-header-end): Functions used
to fontify message header fields.
* mh-alias.el (mh-alias-gcos-name): Checkdoc fix.
2003-06-02 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-gcos-name): New function. Return a usable
address string from a GCOS-NAME and USERNAME.
(mh-alias-local-users): Use it.
* mh-customize.el (mh-alias-passwd-gcos-comma-separator-flag): New
defcustom. Whether the gcos field in the passwd file uses comma as
a separator.
* mh-customize.el (mh-alias-local-users-prefix): New
defcustom. String to append to the real names of users from the
passwd file. If nil, use the username string unmodified instead of
the real name from the gcos field of the passwd file.
* mh-alias.el (mh-alias-local-users): Use it to generate aliases
which by default are now the real name prefixed by "local."
2003-06-01 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-modify-header-field): Bug fix. Calling with with
a value that was already inserted causes it to get inserted a
second time. I have wrapped the value around \b word delimiters.
Hope there are no side effects for other code.
* mh-comp.el (mh-insert-auto-fields): Attempt regardless of
`mh-insert-auto-fields-done-local' flag in interactive use.
* mh-comp.el (mh-insert-auto-fields-done-local): Keep track of
whether `mh-insert-auto-fields' was called in a buffer.
(mh-insert-auto-fields): Set it and use it. Also, don't enter an
identity if one was already entered manually.
(mh-send-letter): Call `mh-insert-auto-fields' again when sending
message.
(mh-compose-and-send-mail): Call `mh-insert-auto-fields' _after_
`mh-letter-mode' so `mh-identity-local' doesn't get cleared by the
mode invocation.
2003-06-01 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-thread-parse-scan-line): The value of
mh-scan-field-from-start-offset was hardcoded in one place. The
change fixes that.
* mh-utils.el (mh-show-mode): Setup mh-show-mode to display
elipsis for truncated header fields and to skip over them quickly.
(mh-clean-msg-header): Make another pass over the message header
fields truncating long headers.
* mh-comp.el (mh-letter-complete): Remove unnecessary autoload.
(mh-letter-toggle-header-field-display): Take into account that
an empty line can also end the message header. The function was
originally written with the draft buffer in mind.
2003-06-01 Mark D. Baushke <mdb@gnu.org>
* mh-comp.el (mh-letter-mode-map): Do not steal C-t. Use C-c C-t
for the mh-letter-toggle-header-field-display command.
2003-05-31 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-visible-headers): Changed to a defvar that
will be set using new `mh-visible-headers' function using
`mh-visible-header-fields' as input.
(mh-visible-headers): New function, described above.
(mh-visible-header-fields): New defcustom. The UI to set
`mh-visible-headers'.
(mh-invisible-header-fields-set): Deleted. Code merged into
defcustom since it's so short.
2003-05-31 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-toggle-header-field-display): Extended to
truncate headers if they are too long.
(mh-letter-truncate-header-field): Make code that would be
duplicated into a function.
(mh-letter-hide-all-skipped-fields): Modified so that fields that
are important are hidden if they are too long.
2003-05-31 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el ("tool-bar"): Since tool-bar isn't available on
XEmacs, requiring it causes problems. So load it instead.
(mh-do-at-event-location): New macro to do stuff at location of
events. This has been refactored out of mh-push-button.
* mh-mime.el (mh-push-button): Simplified since it now uses the
mh-do-at-event-location macro.
* mh-comp.el (mh-hidden-header-keymap): Keymap to make mouse
clicks on header toggle its display.
(mh-letter-toggle-header-field-display-button): Interactive
function to toggle header display when mouse button is clicked.
2003-05-31 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-mode): Remove conditional on tool-bar-mode.
* mh-comp.el (mh-letter-mode): Same.
* mh-utils.el (mh-show-mode): Same.
2003-05-30 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (tool-bar): Load tool-bar explicitly. This avoids
problems with incorrect initialization of tool-bar-map otherwise.
2003-05-30 Peter S Galbraith <psg@mixed.dyndns.org>
* mh-comp.el (mh-modify-header-field): Minor fix of spaces for
when an entry already existed.
(mh-insert-auto-fields): Make interactive. Add optional `quiet'
arg for use when called systematically on every buffer. Won't be
used interactively for more verbose output.
(mh-letter-mode-map): Add \C-c\M-d keybinding for
mh-insert-auto-fields.
* mh-identity.el (mh-identity-make-menu): Add a menu entry in
Identity menu for mh-insert-auto-fields.
* mh-customize.el (mh-invisible-header-fields): Add entries for
`Envelope-to' and `X-Original-To'.
2003-05-30 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-mode): Skip over invisible text quickly.
2003-05-30 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-mode): Use text properties to achieve
invisibility. This is more portable and the same code can be used
for all Emacs versions.
(mh-letter-toggle-header-field-display): Rewritten to use text
properties.
(mh-dead-overlay-p, mh-letter-hidden-header-fields)): Removed.
2003-05-29 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-hidden-header-fields, mh-letter-mode): Add
a hash table, initialized it in mh-letter-mode, to remember the
overlays introduced to hide long headers fields.
(mh-insert-x-mailer): checkdoc fix.
(mh-compose-and-send-mail): Hide unimportant message header
fields.
(mh-letter-header-field-regexp, mh-letter-header-field-at-point)
(mh-letter-next-header-field, mh-letter-previous-header-field):
Add a variable that contains the header-field name regexp and use
it instead of the regexp directly.
(mh-letter-toggle-header-field-display, mh-letter-mode-map): Add
new key binding in mh-letter-mode that toggles display of long
header fields, in mh-letter-mode.
(mh-dead-overlay-p): A predicate which checks if a given header
field has an active overlay hiding it.
(mh-letter-hide-all-skipped-fields): New function that shortens
uninteresting headers.
2003-05-29 Eric Ding <ericding@acorn.bethesda.net>
* mh-comp.el (mh-letter-next-header-field-or-indent): Call
indent-relative rather than indent-for-tab-command.
2003-05-29 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-complete-or-space): The meaning of the
customizable variable was reversed. Also make the doc string more
accurate.
2003-05-28 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el (mh-compose-skipped-header-fields): New
customizable variable that lists headers that are skipped.
(mh-compose-space-does-completion-flag): Option to do completion
with space (closes SF #745634).
* mh-comp.el (mh-insert-x-mailer): Check the value of
mh-insert-x-mailer-flag in this function instead of in its caller.
(mh-compose-and-send-mail, mh-send-letter): Insert X-Mailer and
X-Face headers when the draft is first presented to the user
instead of when the mail is sent (closes SF #745624).
(mh-letter-complete-or-space): Allow for this key binding to be
overridden.
(mh-letter-next-header-field): Fix a problem with multiline header
fields.
(mh-letter-next-header-field, mh-letter-previous-header-field):
Make these functions skip unwanted header fields.
(mh-letter-skipped-header-field-p): New predicate that checks if a
header field is to be skipped.
* mh-seq.el (mh-thread-inc): Inc'ing email in threaded mode was
causing duplication of the current notation. The change fixes that.
2003-05-28 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-beginning-of-word): Generalize it to skip
arbitrary number of words.
(mh-letter-complete-or-space): New interactive function that
allows space character to be used for completion.
(mh-letter-mode-map): Add key binding to allow space to be used
for completion.
2003-05-27 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el (mh-compose-prompt-flag): Customizable variable
that controls whether the user is prompted when composing a draft.
It replaces mh-dont-prompt-for-address-flag (closes SF #745622).
* mh-comp.el (mh-letter-next-header-field): If the point is in
the header field name, then go the start of the header field
instead of the next field.
(mh-interactive-read-address, mh-interactive-read-string)
(mh-letter-adjust-point): Use mh-compose-prompt-flag instead of
mh-dont-prompt-for-address-flag.
2003-05-27 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el (mh-tool-bar-define): Fix incorrect usage of
set-specifier (closes SF #745655). Also the button enabling code
interacts poorly with font-lock in XEmacs. So disable that.
2003-05-26 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-folder-from-address): The function
message-fetch-field expects that the buffer is narrowed to the
mail header. The change makes sure that this is indeed the case.
* mh-mime.el (mh-add-missing-mime-version-header)
(mh-decode-message-body): Same as above.
2003-05-25 Satyaki Das <satyakid@stanford.edu>
* mh-alias.el (mh-alias-minibuffer-confirm-address): Modified to
use mh-beginning-of-word.
* mh-comp.el (mh-letter-confirm-address): Calling
mh-alias-reload-maybe can be expensive. So do it only if we really
need to.
2003-05-25 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-comp.el (mh-letter-confirm-address): Load aliases if not yet
loaded.
* mh-alias.el (mh-alias-reload-maybe): Autoload it since it is
used in mh-comp.el.
2003-05-24 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-letter-skip-leading-whitespace-in-header-field):
New function to skip leading space and tab characters when placing
point in a header field.
(mh-letter-next-header-field, mh-letter-previous-header-field):
Skip leading whitespace when using TAB to navigate to header
fields.
(mh-letter-confirm-address): New interactive function that
displays the last expansion of the last alias when "," is typed.
(mh-letter-mode-map): Add key binding for "," (closes SF #745634).
2003-05-23 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el (mh-edit-again, mh-forward, mh-send)
(mh-send-other-window, mh-send-sub): Modified so that if
mh-dont-prompt-for-address-flag is non-nil, then MH-E won't prompt
for addresses to send mail to and instead directly jump to the
draft (closes SF #745622).
(mh-letter-complete-function-alist): An alist that is used to
decide which completion function to use in which header. This
variable should probably be customizable.
(mh-letter-complete): Now uses mh-letter-complete-function-alist.
(mh-letter-header-field-at-point, mh-letter-next-header-field)
(mh-letter-next-header-field-or-indent)
(mh-letter-previous-header-field): Commands for easier navigation
to header fields.
(mh-dont-prompt-for-address-flag): Variable which controls
whether MH-E prompts for addresses.
(mh-interactive-read-address, mh-interactive-read-string): Two
functions to ask user for input depending on the value of the
above flag.
(mh-letter-adjust-point): New function that sets point to the
first header field.
(mh-letter-mode-map): Add key bindings for TAB and S-TAB (closes
SF #745627).
2003-05-23 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-comp.el (mh-complete-word): New function which is
approximately equivalent to mail-abbrev-complete-alias.
(mh-beginning-of-word): Refactor repeated code into its own
function.
(mh-folder-expand-at-point): Make Fcc completion work in XEmacs
by not using mail-abbrev-complete-alias.
* mh-alias.el (mh-alias-letter-expand-alias): Make alias
expansion work in XEmacs. Replace the use of the function
mail-abbrev-complete-alias, which isn't present in XEmacs.
* mh-mime.el (mh-mml-to-mime): If a MIME message is created
immediately after starting MH-E then invoking mh-mml-to-mime
causes an error because "message" isn't being loaded. The change
works around this problem.
(mh-mime-maybe-display-alternatives): Give better indication of
which MIME parts are alternatives.
2003-05-22 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-add-sequence-notation, mh-remove-sequence-notation):
Just delete and add the same character in the scan line to make
font-lock refontify it. The previous trick of removing all text
properties didn't work in XEmacs.
* mh-seq.el (mh-put-msg-in-seq): Complain if the user tries to
create an invalid MH sequence.
* mh-mime.el (mh-mime-display-alternative): Modified to
optionally display alternatives as buttons.
(mh-mime-maybe-display-alternatives): New function which displays
alternative MIME parts as buttons.
(mh-mime-save-part): Initially mh-mime-save-parts-directory is
nil and calling file-name-as-directory with nil arg leads to an
error. So fall back on the default-directory in that case.
* mh-customize.el (mh-display-buttons-for-alternatives-flag): New
customizable variable that controls display of the alternative
MIME parts (closes SF #741288).
2003-05-22 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-invisible-header-fields): Commented out
"User-Agent:". It's similar to X-Mailer, so display it.
2003-05-21 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el (mh-tool-bar-define): Add an optional argument
to the button description that can dynamically enable/disable
buttons.
(mh-tool-bar-define): The alias grabbing button is disabled if the
current message doesn't have a From header or if the sender is
already in the user's alias. This functionality was inadvertently
lost when the Emacs/XEmacs toolbar unification took place.
2003-05-20 Satyaki Das <satyakid@stanford.edu>
* mh-unit.el (mh-unit-construct-call-graph): Be more aggressive
and flag interactive functions that aren't autoloaded or have no
key bindings.
(mh-unit-interactive-function-p): Remove now unused function.
(mh-unit, mh-unit-construct-call-graph): Replace mh-files with
mh-unit-files.
2003-05-20 Bill Wohler <wohler@newt.com>
* mh-unit.el (mh-prune-trailing-spaces): Renamed to
mh-unit-prune-trailing-spaces to clean up the namespace.
(mh-files): Renamed to mh-unit-files. Ditto.
(mh-unit): Checkdoc fix.
* mh-index.el (mh-index-p): Added autoload cookie since mh-index-p
is used by mh-customize.el. This calls for another mh-unit test
that looks for mh-autoloads for functions that are no longer used
in other files.
* mh-loaddefs.el: Regenerated.
2003-05-20 Satyaki Das <satyakid@stanford.edu>
* mh-unit.el (mh-unit-construct-call-graph): Factor out the code
to read the lisp files to a separate function. Also change it to
construct a function call-graph. Autoloaded functions are taken
into account.
(mh-unit-find-all-used-functions, mh-unit-called-functions)
(mh-unit-find-all-unused-functions): Find all unused functions by
computing a fixed point starting from the set of top level
functions.
(mh-unit-analyze-block): Removed.
(mh-unit-update-call-graph): mh-unit-functions-called was renamed
with modifications to update the function call graph.
2003-05-19 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-notate): Modified to keep track of notation
that was replaced when sequence notation is added. Thus when the
sequence is deleted, the original notation is recovered.
(mh-add-msgs-to-seq): Modified to work with the new sequence
notation code.
* mh-seq.el (mh-delete-seq, mh-put-msg-in-seq): Simplified since
we don't need to handle tick and unseen sequences specially any
more.
(mh-narrow-to-seq): Don't need to call mh-notate-user-sequences
since mh-copy-seq-to-eob already does that.
(mh-widen): Remove sequence notation, so that notation when
messages are replied to aren't lost.
(mh-copy-seq-to-eob): Simplified with the use of
mh-iterate-on-range.
(mh-thread-inc): This function doesn't need to notate user
sequences since its callers already do that.
(mh-thread-parse-scan-line): Simplified since mh-note-seq doesn't
appear in scan lines it is given as arguments.
(mh-thread-update-scan-line-map): Remove the test, since its
caller already does the required check.
(mh-thread-folder): Simplified by the use of mh-iterate-on-range.
(mh-tick-add-overlay, mh-tick-remove-overlay, mh-notate-tick):
These functions aren't needed any more, since overlays aren't used
any more. Also overlays aren't portable to XEmacs, so nasty
conditional code that used overlays in Emacs and extents in Xemacs
have been eliminated.
(mh-toggle-tick): Generalize it to work on a range of messages
like the other interactive messages.
* mh-funcs.el (mh-undo-folder): Use mh-remove-all-notation
instead of mh-unmark-all-headers.
* mh-e.el (mh-folder-font-lock-keywords): The entry for unseen
sequence highlighting is now done by the macro.
(mh-generate-sequence-font-lock): New macro to highlight any
arbitrary sequence. This macro is invoked twice to get the
highlighting for unseen and tick sequences.
(mh-sequence-notation-history, mh-folder-mode): New variable that
keeps track of the old notation when a message is notated with
mh-note-seq.
(mh-regenerate-headers, mh-get-new-mail): Add appropriate calls to
mh-notate-user-sequences and mh-remove-all-notation.
(mh-unmark-all-headers): Add comment that this function shouldn't
be used any more.
(mh-add-sequence-notation, mh-remove-sequence-notation): New
functions to notate message with mh-note-seq and to remove it.
(mh-remove-all-notation): Simplified to use mh-iterate-on-range.
(mh-process-commands): Use mh-remove-all-notation instead of
mh-unmark-all-headers.
(mh-notate-user-sequences, mh-delete-msg-from-seq): Simplified
since the tick and unseen sequences don't need special handling
any more.
(mh-internal-seq): Make it possible to dynamically change what
sequences are treated as internal (internal means font lock is
used to highlight the sequence).
(mh-clear-text-properties): Removed since it isn't needed
anymore.
2003-05-19 Satyaki Das <satyakid@stanford.edu>
* mh-unit.el (mh-unit-analyze-block, mh-unit-interactive-function-p)
(mh-unit-find-all-unused-functions): Change argument name bl to
block.
2003-05-19 Satyaki Das <satyakid@stanford.edu>
* mh-unit.el (mh-unit-find-all-unused-functions): New interactive
function to find all unused functions in MH-E.
(mh-unit-analyze-block, mh-unit-interactive-function-p)
(mh-unit-functions-called): Functions used by
mh-unit-find-all-unused-functions do its job.
* Makefile (compile): Byte-compile mh-unit.el, since the analysis
to find unused code runs faster when compiled.
2003-05-18 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-notate-deleted-and-refiled): Add autoload
declaration since this function is used in mh-index.el.
* mh-e.el, mh-customize.el, mh-utils.el: Adjust require/provide
statements so that mh-e.el isn't loaded twice.
2003-05-15 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-defun-show-buffer): Arrange for the current
line in the folder buffer to be highlighted even when we are in
the show buffer.
2003-05-14 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-read-range): Allow this to work on invalid
sequences that only MH-E knows about.
* mh-index.el (mh-create-sequence-map, mh-index-add-to-sequence)
(mh-index-delete-from-sequence): Don't consider sequences that
aren't valid MH sequences.
* mh-e.el (mh-valid-seq-p): New predicate to check if a symbol
could be a MH sequence.
(mh-undefine-sequence, mh-define-sequence): Don't execute "mark"
unless the sequence name is a valid MH sequence.
* mh-utils.el (mh-exec-cmd): In case an error happens in the
call-process and non-strings are present in ARGS, then the error
message isn't properly displayed. The change fixes this.
2003-05-14 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-mime-save-part): Bug Fix: Make sure
`mm-default-directory' gets a trailing "/" if
`mh-mime-save-parts-directory' doesn't have one. Otherwise the
default in the prompt of `mh-mm-save-part' will be wrong. Perhaps
`mh-mm-save-part' needs to do this check itself.
2003-05-14 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-unpropagated-sequences): New function and
variable to keep track of sequences that shouldn't be propagated.
(mh-create-sequence-map, mh-index-add-to-sequence)
(mh-index-delete-from-sequence): Use mh-unpropagated-sequences to
stop changes to some sequences being reflected back to the source
folders.
2003-05-13 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-e.el (mh-process-commands): Preserve sequences when messages
are refiled (closes SF #737128).
* mh-index.el (mh-create-sequence-map)
(mh-index-create-sequences): Refactor code that is reused into a
new function.
* mh-customize.el (mh-refile-preserves-sequences-flag): New
customizable flag that controls whether sequences are preserved
when messages are refiled.
2003-05-13 Eric Ding <ericding@alum.mit.edu>
* mh-e.el (mh-scan-format): The argument for scan format files
should be -form, not -format.
2003-05-13 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-widen): The scan line map stack was not being
properly updated when ALL-FLAG is non-nil. The change fixes that.
* mh-e.el (mh-reset-threads-and-narrowing): The change resets the
scan line map stack.
2003-05-12 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-thread-scan-line-map-stack)
(mh-thread-old-scan-line-map): Instead of the old scan line map,
now we need to maintain a stack of scan line maps.
(mh-narrow-to-seq): Modified so that multiple level of narrowings
can be done. We now maintain a stack of old views instead of
hiding the old scan lines. This makes it possible to have
multiple levels of narrowings.
(mh-widen): A optional prefix arg was added to allow undoing all
narrowing.
(mh-read-seq-default, mh-read-range): Don't use
mh-narrowed-to-seq, since it doesn't exist any more.
(mh-thread-initialize-hash, mh-thread-initialize): The
mh-thread-initialize function has been refactored.
(mh-thread-update-scan-line-map): Maintain notations in the stack
of scan line maps.
(mh-notate-tick, mh-toggle-tick): Simplified, since we don't have
mh-narrowed-to-seq any more. This means there is a slight loss of
functionality. Earlier if we narrowed to the tick sequence the
ticked messages weren't highlighted. This feature isn't present
any more.
* mh-e.el (mh-execute-commands, mh-reset-threads-and-narrowing)
(mh-folder-sequence-menu, mh-get-new-mail): Use
mh-folder-view-stack instead of the now removed
mh-narrowed-to-seq.
(mh-narrowed-to-seq, mh-tick-seq-changed-when-narrowed-flag):
These variables have been removed.
(mh-folder-view-stack): New variable to keep track of a stack of
narrowings.
(mh-execute-commands, mh-get-new-mail): Add extra argument to
mh-widen so that all narrowings are undone.
* Makefile (MH-E-SRC, MH-E-OTHERS): Move mh-gnus.el from MH-E-SRC
to MH-E-OTHERS so that it isn't byte compiled.
2003-05-10 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-read-seq): Improve the function a bit by adding
history to the sequence prompt.
2003-05-09 Satyaki Das <satyakid@stanford.edu>
* mh-gnus.el: New file that won't be byte-compiled. From now on
having different Gnus versions at run-time and compile-time won't
cause errors in MH-E.
* mh-mime.el (mh-small-show-buffer-p, mh-display-smileys)
(mh-display-emphasis): Handle all legal values of
font-lock-maximum-size. The existing code assumed didn't consider
the case where it could be an alist.
(mh-small-image-p): Simplified, so that aliasing XEmacs functions
in Emacs isn't necessary any more.
(mh-mm-display-part): Remove unnecessary call to fboundp. The
mh-funcall-if-exists does that for us any way.
(mh-defun-compat, gnus-local-map-property, mm-merge-handles)
(mm-set-handle-multipart-parameter, mm-readable-p)
(mm-long-lines-p, mm-keep-viewer-alive-p, mm-destroy-parts)
(mh-mm-save-part, mm-handle-multipart-ctl-parameter): These
compatibility functions have been moved to mh-gnus.el.
* Makefile (MH-E-SRC): Add mh-gnus.el.
* mh-seq.el (mh-narrow-to-header-field)
(mh-current-message-header-field): Checkdoc fixes.
* mh-e.el (mh-undefine-sequence): Since mh-coalesce-msg-list
returns a list, apply is needed.
2003-05-09 Noel Cragg <noel@red-bean.com> (tiny change)
* mh-junk.el (mh-spamassassin-blacklist): Separate "--local" and
"--no-rebuild" arguments to call-process.
[Patch committed by satyaki]
2003-05-08 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-translate-range): Take into account differnt
semantics of split-string in Emacs and XEmacs.
(mh-read-pick-regexp, mh-narrow-to-from, mh-narrow-to-cc)
(mh-narrow-to-to, mh-narrow-to-header-field)
(mh-current-message-header-field, mh-narrow-to-range): New
narrowing functions that can select messages based on different
message headers.
* mh-utils.el (mh-show-limit-map): Add new narrowing functions
callable from the show buffer.
* mh-e.el (mh-help-messages): Add help text for new functions.
(mh-limit-map): Add new narrowing functions (closes SF #732823).
2003-05-07 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-collect-folder-names): Use mh-exec-daemon to
run flists. This means we don't have to remember to expand the MH
executable in the mh-progs path.
(mh-exec-cmd-daemon): Return the new process object produced.
2003-05-06 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-folder-font-lock-unseen): Use mh-seq-list to do
unseen sequence highlighting instead of reading the .mh_sequences
file from disk every time.
2003-05-05 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-show-sequence-map): Add key binding for S'
(closes SF #732825).
* mh-e.el (mh-sequence-map): Ditto.
(mh-help-messages): Updated for S'.
2003-05-04 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-write-data): The with-temp-buffer macro
is a bit better than write-file, so use that instead.
2003-05-03 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-update-maps, mh-index-search)
(mh-index-sequenced-messages): Write index data to disk. This
allows us to recover index folder information if Emacs is
restarted, or the index folder is visited after the buffer has
been killed (closes SF #701762).
(mh-index-write-data, mh-index-read-data)
(mh-index-write-hashtable, mh-index-read-hashtable): Functions to
store and read index data information to disk.
(mh-index-insert-folder-headers, mh-index-group-by-folder): We
can no longer use object identity to compare strings, since they
might have been read back from disk.
* mh-e.el (mh-index-data-file): New variable that stores the name
of the file that keeps track of index folder data.
(mh-make-folder): Read index folder data if available.
* mh-utils.el (mh-show, mh-summary-height, mh-modify): Make
checkdoc happy.
* mh-seq.el (mh-tick-add-overlay): Rearrange code to make code
more uniform.
* mh-loaddefs.el: Regenerated.
2003-05-02 Satyaki Das <satyakid@stanford.edu>
* mh-seq.el (mh-tick-add-overlay): If a message with a short scan
line is ticked, then the highlighting didn't extend to the right
margin. This change fixes that.
2003-05-01 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-help-messages): Added brackets around / and
downcased limit to be consistent with other commands with
punctuation keybindings. Don't document aliases.
2003-05-01 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-read-range): Fix comment.
2003-04-30 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (mh-help-messages): Better documentation for the F map.
2003-04-30 Satyaki Das <satyakid@stanford.edu>
* mh-utils.el (mh-find-path): Cache folder names so that
folder name completion is always fast.
(mh-flists-partial-line, mh-flists-process): Variables used for
pre-caching folder names.
(mh-collect-folder-names, mh-collect-folder-names-filter)
(mh-populate-sub-folders-cache): Functions to pre-cache folder
names.
(mh-exec-cmd): Produce more info in *MH-E Log*.
* mh-index.el (mh-index-search): Call the correct function.
(mh-index-sequenced-messages): If folders is nil, then all mail
is searched. The change restores that.
2003-04-30 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-summary-height): Move variable integer out
of defcustom, and instead specify that `nil' means to calculate
that size dynamically. Fixes SF #723267.
* mh-utils.el (mh-summary-height): New function. Return ideal
mh-summary-height value for current frame height.
(mh-show-msg): Use it.
2003-04-30 Mark D. Baushke <mdb@gnu.org>
* mh-index.el (mh-index-ticked-messages): Fix prompt and
description string.
(mh-index-new-messages): Ditto.
* mh-loaddefs.el: Regenerated.
* mh-index.el (mh-index-sequenced-messages): Renamed from
mh-index-new-messages with minor argument change.
(mh-index-new-messages): Implement by calling
mh-index-sequenced-messages with the appropriate arguments.
(mh-index-ticked-messages): New function. Does the same thing as
mh-index-new-messages, but on its own set of folders and using the
mh-tick-seq instead of mh-unseen-seq.
* mh-e.el (mh-folder-map): Add "F'" to the map for
mh-index-ticked-messages.
(mh-help-messages): Replace broken [t]hread with [n]ew messages.
* mh-customize.el (mh-index-ticked-messages-folders): New user
customizable flag that controls the folders to be searched by
mh-index-ticked-messages.
* mh-utils.el (mh-show-index-ticked-messages): Wrapper for
mh-index-ticked-messages.
(mh-show-folder-map): Add "F'" to the map for
mh-index-ticked-messages.
2003-04-30 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-search): The old cur in the source folder
might not exist. This could cause mh-exec-cmd to fail. So don't
add an error message in that case.
2003-04-29 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-folder-from-address): Modified to allow multiple
Cc: headers to work properly.
(mh-inc-folder, mh-visit-folder): Fix an off by one error.
* mh-utils.el (mh-notate): Update the scan line map. This fixes a
tiny bug. In threaded view, if a message is replied to then the
message is notated with a "-". Now if inc is done then the "-"
added is lost. The change fixes this.
* mh-seq.el (mh-translate-range): Use the correct function.
(mh-thread-update-scan-line-map): New function that updates the
scan line map when a message is notated.
2003-04-28 Satyaki Das <satyakid@stanford.edu>
* mh-index.el (mh-index-parse-search-regexp): Avoid compiler
warning in GNU Emacs 21.3.
* mh-seq.el (mh-widen): Ditto.
2003-04-28 Satyaki Das <satyakid@stanford.edu>
* mh-customize.el (mh-interpret-number-as-range-flag): New user
customizable flag that controls whether a single number, N is
interpreted as the range last:N.
* mh-seq.el (mh-read-range): Generalize it for use when reading
range to scan.
(mh-interactive-range): Modified to use the new mh-read-range.
* mh-speed.el (mh-speed-view): Use mh-read-range instead of the
now removed mh-read-msg-range function.
* mh-funcs.el (mh-pack-folder): Ditto.
* mh-e.el (mh-rescan-folder, mh-visit-folder): Ditto.
(mh-read-msg-range): Removed.
* mh-loaddefs.el: Regenerated
2003-04-27 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-range-completion-function): Fix checkdoc warning.
(mh-iterate-on-range): Mention that the macro can iterate over a
MH message range too.
2003-04-27 Bill Wohler <wohler@newt.com>
* mh-unit.el (mh-unit): As it turns out, lm-crack-copyright has
been updated to handle multiple-line copyrights in 21.3, so
updated code to run lm-verify only if user has 21.3 or greater.
Delete buffers after use, unless user already had buffer open.
2003-04-27 Satyaki Das <satyakid@stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-index.el (mh-index-search): The MH command "refile" changes
cur. The change restores cur in source folders.
(mh-index-new-messages): Use the appropriate arguments for
mh-read-seq.
* mh-seq.el (mh-read-seq-default, mh-read-seq): Restore these
functions to just read sequence names.
(mh-range-seq-names, mh-range-history, mh-range-completion-map)
(mh-range-completion-function, mh-read-range): New function which
reads MH range with completion and history.
(mh-interactive-range): Use mh-read-range instead of
mh-read-seq-default.
(mh-put-msg-in-seq): Change documentation about MH message range.
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist): Change
documentation about MH message range.
* mh-funcs.el (mh-copy-msg, mh-print-msg): Ditto.
* mh-e.el (mh-delete-msg, mh-delete-msg-no-motion)
(mh-refile-msg, mh-undo, mh-delete-msg-from-seq): Ditto.
* mh-comp.el (mh-forward): Ditto.
2003-04-26 Satyaki Das <satyakid@stanford.edu>
* mh-comp.el, mh-e.el, mh-funcs.el, mh-junk.el, mh-seq.el:
Replace msg-or-seq with range everywhere.
* mh-loaddefs.el: Regenerated.
2003-04-25 Satyaki Das <satyakid@stanford.edu>
* mh-e.el (mh-index-sequence-search-flag, mh-folder-mode): New
local variable to remember that a folder buffer contains results
from a sequence search. This is needed so that "C-u F i" will work
as expected.
(mh-visit-folder): Create sequences in the index folder.
(mh-process-commands, mh-delete-msg-from-seq): If speedbar is on
then update the speedbar message counts immediately.
(mh-delete-msg-from-seq): Make the code faster by calling "mark"
just once. Also update source folder sequence if messages are
being deleted from a sequence in an index folder.
(mh-undefine-sequence): Simplified to remove the speedbar updating
code. Also DTRT and don't change any sequence when called with an
empty list of messages.
(mh-refile-msg, mh-delete-msg): Move to next message only if the
current message has been deleted or refiled, as the case may be.
* mh-utils.el (mh-show-msg): Update the message counts in the
speedbar, if it is on, immediately.
(mh-speed-flists-active-p, mh-speed-flists-inhibit-flag): A new
flag has been added which inhibits updating of the speedbar. This
is used to avoid needless speedbar updates when
mh-execute-commands is called in index folders.
* mh-speed.el (mh-speed-flists): Extended so that multiple
folders can be given as arguments. Also the code that kept track
of the current folder, needed since flists adds an extra ?+ char
at the end of the current folder name, wasn't entirely correct.
That has also been fixed.
* mh-seq.el (mh-delete-seq, mh-put-msg-in-seq): Modified so that
sequence in source folder is updated if we delete a sequence in an
index folder.
(mh-read-seq, mh-read-seq-default, mh-translate-range)
(mh-interactive-msg-or-seq): The mh-interactive-msg-or-seq
function can read in an arbitrary MH message range.
(mh-iterate-on-msg-or-seq): The macro has been extended to work on
a MH range.
(mh-subject-to-sequence, mh-subject-to-sequence-unthreaded)
(mh-subject-to-sequence-threaded, mh-thread-find-msg-subject): Fix
the mh-subject-to-sequence function so that it will work in
threaded folders too.
(mh-tick-add-overlay): Fix a leak of overlays.
(mh-toggle-tick): Ticking, or unticking, messages in the index
folder is propagated to the source folders (closes SF #709664).
* mh-index.el (mh-flists-results-folder, mh-flists-sequence)
(mh-flists-called-flag): New variables to implement searching for
arbitrary sequences.
(mh-index-generate-pretty-name): Updated so that folder names are
generated for flists search that can take any sequence name.
(mh-index-search): Since sequences are now properly maintained the
unseen-flag argument isn't needed and hence removed. Also redoing
a sequence search with "C-u F i" is handled correctly. Finally
the speedbar is updated to reflect the new index folder created.
(mh-index-create-sequences): New function that creates sequences
in the index folder.
(mh-index-matching-source-msgs, mh-index-execute-commands):
Improved so that scan lines for refiled/deleted messages are
removed from the source folders as well.
(mh-index-add-to-sequence, mh-index-delete-from-sequence): New
functions to update sequences in source folder to reflect changes
in index folder.
(mh-index-quote-for-shell): A utility function to that quotes
characters with special meaning to /bin/sh.
(mh-flists-execute, mh-index-new-messages): Updated to search for
arbitrary sequences (closes SF #718833).
* mh-loaddefs.el: Regenerated.
2003-04-25 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-kill-folder-suppress-prompt-hook): New hook
used by mh-kill-folder to suppress the prompt.
* mh-funcs.el (mh-kill-folder): Suppress prompt not if
mh-index-data is non-nil, but if any functions in
mh-kill-folder-suppress-prompt-hook return non-nil.
* mh-index.el (mh-index-p): New function with returns non-nil if
the current folder was generated by an index search for use by
mh-kill-folder-suppress-prompt-hook
* mh-unit.el (mh-unit): Commented out lm-verify step until code
updated to handle split Copyright lines.
* mh-e.el (mh-version): Set to 7.3+cvs.
2003-04-24 Bill Wohler <wohler@newt.com>
Released MH-E version 7.3.
* MH-E-NEWS, README: Updated for release 7.3.
* mh-e.el (Version, mh-version): Updated for release 7.3.
2003-04-24 Satyaki Das <satyakid@stanford.edu>
* mh-xemacs-compat.el (mh-utils): Require mh-utils at compile
time, since the mh-do-in-xemacs macro is used.
* mh-inc.el (cl): Require cl at compile time since we are using
the loop and setf macros.
2003-04-24 Satyaki Das <satyakid@stanford.edu>
* mh-unit.el (mh-files): Fix the list of files to check.
2003-04-24 Bill Wohler <wohler@newt.com>
* ChangeLog: Appended copyright to end of file.
* Makefile: Added copyright and license.
* README: Added copyright.
* import-emacs: Changed copyright from Newt Software to Bill
Wohler and use license from mh-e.el, except that this file is
a part of MH-E, not GNU Emacs.
* mh-alias.el: Updated copyright so that it doesn't wrap upon
advice from Richard Stallman who said to use two-digit years when
they are surrounded by 4-digit years that are in the same century
and to break up copyrights on multiple lines.
* mh-comp.el: Ditto.
* mh-e.el: Ditto.
* mh-funcs.el: Ditto.
* mh-identity.el: Ditto.
* mh-mime.el: Ditto.
* mh-seq.el: Ditto.
* mh-utils.el: Ditto.
* mh-xemacs-compat.el: Ditto.
* mh-unit.el: New file. Unit tests for MH-E. This version merely
runs checkdoc and lm-verify which is useful before releasing the
software. It can and should be expanded to do real unit tests.
2003-04-22 Mark D Baushke <mdb@gnu.org>
* mh-alias.el: Update Copyright.
* mh-comp.el: Ditto.
* mh-customize.el: Ditto.
* mh-e.el: Ditto.
* mh-funcs.el: Ditto.
* mh-identity.el: Ditto.
* mh-index.el: Ditto.
* mh-mime.el: Ditto.
* mh-pick.el: Ditto.
* mh-seq.el: Ditto.
* mh-speed.el: Ditto.
* mh-utils.el: Ditto.
* mh-xemacs-compat.el: Ditto.
2003-04-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-normalize-folder-name): Make the completion
code work properly with XEmacs. This change is neeeded since
split-string behaves differently in XEmacs than it does in GNU
Emacs.
(mh-exec-cmd-error): Add a comment, so that we change it later on.
2003-04-18 Steve Youngs <youngs@xemacs.org>
* mh-xemacs-icons.el (mh-xemacs-icons): Provide 'mh-xemacs-icons'
not 'mh-xemacs-toolbar'.
* mh-xemacs-compat.el (mh-xemacs-toolbar): Remove require, it's
now called 'mh-xemacs-icons' and it is required from
'mh-customize'.
* mh-customize.el: Require 'mh-xemacs-icons' instead of
'mh-xemacs-toolbar'.
2003-04-17 Peter S Galbraith <psg@debian.org>
* mh-xemacs-icons.el: New file (renamed from mh-xemacs-toolbar.el).
Holds XEmacs icons.
* mh-xemacs-toolbar.el: Deleted.
* Makefile: Incorporate the file renaming.
2003-04-15 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-forward): Pass a list of messages into
mh-compose-and-send-mail instead of msg-or-seq.
(mh-annotate-msg): The previous version called
mh-iterate-on-msg-or-seq in the letter buffer. The new version
simply adds the ability to operate on message lists. Thanks to
Satyaki for the fix and suggestion for passing a list from
mh-forward.
2003-04-14 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-annotate-msg): Updated to handle msg-or-seq for
mh-forward was passing a msg-or-seq to mh-compose-and-send-mail
which in turn passed the msg-or-seq to mh-annotate-msg. In
particular, forwarding a region failed. Note that the msgs
argument in much of mh-comp.el should really be converted to
msg-or-seq accordingly. But not now, unless something is broken as
was the case here. We can revamp after the release.
2003-04-13 Bill Wohler <wohler@newt.com>
* mh-funcs.el (mh-kill-folder): Added space after prompt to give
the (yes or no) bit a little elbow room.
* mh-xemacs-toolbar.el: Removing a copyright is a no-no.
Reinstated Steve's copyright.
2003-04-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-do-in-gnu-emacs, mh-do-in-xemacs): Add
indentation hooks for the macros.
2003-04-11 Bill Wohler <wohler@newt.com>
* mh-alias.el, mh-comp.el, mh-customize.el, mh-funcs.el,
mh-identity.el, mh-inc.el, mh-index.el, mh-junk.el, mh-utils.el:
Merged in changes from CVS GNU Emacs. These included the removal
of trailing whitespace.
* mh-customize.el: The "anti-entropy" check-in. Moved groups
around slightly to reflect commentary. Moved defcustoms around
to preserve alphabetization. Big diff, little content.
(mh-xemacs-use-toolbar-flag): Doc fix.
(mh-xemacs-toolbar-position): Fixed typo in docstring.
(mh-default-folder-list): Updated docstring to reflect new Check
Recipient tag. Also, set type of Address to regexp.
(mh-x-mailer-string): Moved to mh-comp.el where it is used.
* mh-comp.el (mh-x-mailer-string): Moved here from customize.el.
Not quite sure how it got to mh-customize.el in the first place.
* mh-e.el (mh-folder-folder-menu): Added Folder -> View New
Messages menu item.
* mh-utils.el (mh-show-folder-menu): Ditto.
* mh-inc.el: Added Change Log comment (lm-verify fix).
* mh-index.el (mh-index-search): Added documentation about prefix
argument for users, in addition to documentation for programmers.
* mh-mime.el (mh-edit-mhn, mh-edit-mhn, mh-mml-to-mime): Docstring
fixes germaine to the change whereby we now check for MIME
directives before sending.
* mh-xemacs-toolbar.el: Fixed copyright. Added Change Log comment
(lm-verify fix). Added standard MH-E local variables. Removed
time-stamp stuff.
2003-04-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-iterate-on-msg-or-seq): Add a missed comma.
2003-04-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-visit-folder): Prompt before reusing
existing folder buffer.
* mh-xemacs-toolbar.el (require): Require mh-utils at compile
time to avoid compilation error when doing "make bootstrap" in
CVS Emacs.
* mh-inc.el (mh-inc-spool-list): Declare it so that a compile
time warning is avoided when doing "make bootstrap" in CVS Emacs.
2003-04-10 Peter S Galbraith <psg@debian.org>
* mh-inc.el (mh-inc-spool-generator): Changed to a defun instead
of a defmacro, applying Satyaki's patch.
(mh-inc-spool-def-key): same.
(mh-inc-spool-make): same.
* mh-utils.el: define-key "I" in mh-show-mode-map for
mh-inc-spool-map.
* mh-comp.el (mh-modify-header-field): Remove debug message.
2003-04-10 Peter S Galbraith <psg@debian.org>
* mh-inc.el (mh-inc-spool-map-help): Default to nil.
(mh-inc-spool-map): Make "?" key display message when
`mh-inc-spool-map-help' is nil (instead of mh-inc-spool-map-help
containing the message).
* mh-e.el: require mh-inc.el
* mh-e.el: define-key "I" in mh-folder-mode-map for mh-inc-spool-map.
(mh-help-messages): Add help string for "I" key.
2003-04-09 Peter S Galbraith <psg@debian.org>
* mh-inc.el: New file. New feature to `inc' mail from various
spool files into different folders.
* mh-loaddefs.el: Regenerate for mh-inc's mh-inc-spool-list-set.
* Makefile (MH-E-IMG): Add highlight icon.
(MH-E-SRC): Add mh-inc.el file.
* mh-customize.el (mh-inc-spool-list): New variable for new
feature to `inc' mail from various spool files into different
folders.
2003-04-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-mail-delivery-buffer): Add a defconst for
mh-mail-delivery-buffer.
* mh-comp.el (mh-send-letter): Use mh-mail-delivery-buffer.
* mh-mime.el (mh-small-image-p): Add mh-funcall-if-exists to
avoid compiler warning in GNU Emacs.
2003-04-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-small-image-p): Make the function slightly more
error-resistant in XEmacs.
* mh-seq.el (mh-narrow-to-seq, mh-widen): Update tool-bar-map in
the show buffer if needed. This allows us to display the widen
button in the show buffer only when the folder is narrowed.
* mh-customize.el (mh-tool-bar-define): Changed so that a
separate tool-bar-map is used in show-mode when folder is
narrowed to a sequence.
2003-04-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-iterate-on-msg-or-seq): Reinstate the use of
make-symbol since using gensym causes compiler warnings in CVS
Emacs.
2003-04-08 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-forward): Function didn't handle a region of
messages. Use new function mh-msg-or-seq-to-msg-list to get a list
of messages in all circumstances. Also, use mh-coalesce-msg-list
on message list before submitting to forw since this should always
be done when calling a program to reduce the chance of exceeding
command-line limits.
* mh-seq.el (mh-iterate-on-msg-or-seq): Backed out previous
change. A nil msg-or-seq should mean no messages, and Satyaki is
going to use gensym instead of make-symbol.
(mh-msg-or-seq-to-msg-list): New function to convert a msg-or-seq
to a list of message numbers.
* mh-e.el (mh-coalesce-msg-list): Touched up the docstring a
little.
* mh-funcs.el (mh-print-msg): Can now print regions, message
lists, sequences and, of course, single messages. This version
works a little differently from the old version. Instead of
calling mhl | lpr once on all messages, mhl | lpr is called once
per message in order to put each message's number in the header.
Thanks to Satyaki for some code and ideas.
* mh-seq.el (mh-iterate-on-msg-or-seq): The argument msg-or-seq
can now be nil which means the current message. Make local symbols
so that local variables don't step on user's symbols (the msgs
symbol got me).
2003-04-06 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-forward): Updated docstrings to indicate that a
list of messages is acceptable as well.
* mh-e.el (mh-delete-msg, mh-delete-msg-no-motion, mh-refile-msg)
(mh-undo, mh-notate-user-sequences, mh-delete-msg-from-seq): Ditto.
* mh-funcs.el (mh-copy-msg, mh-print-msg): Ditto.
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist): Ditto.
* mh-seq.el (mh-put-msg-in-seq, mh-iterate-on-msg-or-seq)
(mh-interactive-msg-or-seq): Ditto.
2003-04-06 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist): Call
mh-refile-a-msg and mh-delete-a-msg with nil as the message
number since that is more efficient.
* mh-seq.el (mh-iterate-on-msg-or-seq): Extended so that it will
handle lists of messages numbers as well.
(mh-put-msg-in-seq): Use mh-iterate-on-msg-or-seq to simplify the
function.
* mh-funcs.el (mh-copy-msg): Same as above.
* mh-e.el (mh-refile-msg): Make it more efficient. Using nil in
mh-refile-a-msg avoids needing to re-search-forward to that
message.
(mh-undo): Fix typo in interactive spec.
(mh-notate-user-sequences): Generalize the function to take a
msg-or-seq as argument.
(mh-delete-msg-from-seq): Extend the function so that it is now
able to subtract messages belonging in one sequence from another.
(mh-undo): Unify the region and sequence handling. The message
number branch of the function does extra stuff, so we can't merge
that in.
2003-04-06 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-forward): Use mh-interactive-msg-or-seq. Inserted
consistent verbiage in docstring for msg-or-seq.
(mh-reply): Don't mention default in opening line in all
docstrings.
* mh-e.el (mh-delete-msg, mh-refile-msg)
(mh-undo, mh-delete-msg-from-seq): Use mh-interactive-msg-or-seq.
Inserted consistent verbiage in docstring for msg-or-seq. In
mh-delete-msg-from-seq, renamed msg-or-region to msg-or-seq.
* mh-funcs.el (mh-copy-msg, mh-print-msg): Use
mh-interactive-msg-or-seq. Inserted consistent verbiage in
docstring for msg-or-seq.
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist): Inserted
consistent verbiage in docstring for msg-or-seq.
* mh-seq.el (mh-msg-is-in-seq): Don't mention default in opening
line in all docstrings.
(mh-put-msg-in-seq): Use mh-interactive-msg-or-seq. Inserted
consistent verbiage in docstring for msg-or-seq.
* mh-e.el (mh-delete-msg, mh-delete-msg-no-motion, mh-refile-msg):
Rewritten to use new mh-interactive-msg-or-seq function and
mh-iterate-on-msg-or-seq macro. mh-delete-msg-no-motion gained the
ability to operate on regions.
* mh-junk.el (mh-junk-blacklist, mh-junk-whitelist): Rewritten to
use new mh-interactive-msg-or-seq function and
mh-iterate-on-msg-or-seq macro thereby gaining the ability to
operate on sequences or regions.
* mh-seq.el (mh-iterate-on-msg-or-seq): New macro to execute code
on a message, a region of messages, or a sequence. This macro
should be in all functions that operate on messages to provide a
uniform interface.
(mh-interactive-msg-or-seq): New function used in interactive
calls to obtain a message number, region, or sequence. This
function should be in all functions that operate on messages to
provide a uniform interface.
* mh-utils.el (with-mh-folder-updating, mh-in-show-buffer): Use
'defun lisp-indent-hook property instead of 1 to fix indentation
of these macros.
2003-04-05 Peter S Galbraith <psg@debian.org>
* mh-loaddefs.el: Regenerated.
* mh-funcs.el (mh-ephem-message): autoload.
2003-04-04 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-from-address): Minor Fix. Wrong ending of
`when' block.
2003-04-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-mml-directive-present-p): The regexp has been
modified to recognize directives to encrypt/sign messages.
2003-04-03 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (mh-folder-from-address): E-mail messages missing the
To: field, but which have a Cc: field should also be handled.
2003-04-03 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-inc-folder): Modified the prompt text to read
better.
* mh-comp.el (mh-forward): Deleted local variable `compose'.
Deleted obsolete setting of mh-{mmh|mml}-compose-insert-flag.
(mh-letter-menu): Use mh-{mmh|mml}-directive-present-p instead of
obsolete. mh-{mmh|mml}-compose-insert-flag.
(mh-letter-mode): Deleted obsolete setting of
mh-{mmh|mml}-compose-insert-flag.
(mh-send-letter): This function now automatically runs the
directive-to-MIME conversion if any directives are detected,
rather than relying on the unreliable
mh-{mmh|mml}-compose-insert-flag variables. Updated docstring
accordingly.
* mh-identity.el (mh-insert-identity): Use
mh-{mmh|mml}-directive-present-p instead of obsolete.
mh-{mmh|mml}-compose-insert-flag.
* mh-loaddefs.el: Regenerated.
* mh-mime.el (mh-mhn-compose-type, mh-mhn-compose-external-type)
(mh-mhn-compose-forw, mh-edit-mhn, mh-mml-to-mime)
(mh-mml-forward-message, mh-mml-attach-file)
(mh-mml-secure-message-sign-pgpmime)
(mh-mml-secure-message-encrypt-pgpmime): Deleted obsolete setting
of mh-{mmh|mml}-compose-insert-flag.
(mh-mml-directive-present-p): Checkdoc fix.
* mh-utils.el (mh-mhn-compose-insert-flag,
mh-mml-compose-insert-flag): Deleted. Replaced by
mh-{mhn|mml}-directive-present-p.
2003-04-03 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (mh-folder-from-address): Fix minor problem with To:
address processing.
* mh-e.el (mh-folder-from-address): Bugfix match ?+ character not
a "?+" string.
2003-04-03 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-inc-folder): Add second optional argument for the
folder to inc new mail into instead of mh-inbox.
2003-04-03 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-from-address): The first match found in
`mh-default-folder-list' is used.
* mh-customize.el (mh-default-folder-list): Tweak docs
2003-04-03 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-mime.el (mh-mhn-directive-present-p): New function to test if
a MHN directive is present in the current buffer.
(mh-mml-directive-present-p): New function to test if a MML
directive is present in the current buffer.
* mh-comp.el (mh-letter-mode): Originally this function checked if
a #forw directive was present and set mh-mhn-compose-insert-flag
to t. The modification generalizes this test so that one of the
variables mh-{mml|mhn}-compose-insert-flag will get set if we have
any sort of MHN or MML directive is already present.
* mh-seq.el (tool-bar-map): Add a defvar to avoid compiler
warnings in CVS version of GNU Emacs.
* mh-utils.el (tool-bar-map): Same as above.
* mh-e.el (tool-bar-map): same as above.
2003-04-02 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-xemacs-toolbar.el (mh-xemacs-toolbar-toggle-tick-icon):
Change color to match mh-folder-tick-face.
* highlight.xpm: Same as above.
2003-04-02 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-from-address): Check `mh-default-folder-list'
for cases against the recipient instead of the originator.
* mh-customize.el (mh-default-folder-list): Add extra boolean flag
to conditionally check the recipient address instead of the
originator.
2003-04-02 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-folder-tick-face): Change tick highlight
face to a background yellow-green, as suggested by Bill.
2003-04-01 Peter S Galbraith <psg@debian.org>
* highlight.xpm: New icon for mh-toggle-tick.
* mh-xemacs-toolbar.el (mh-xemacs-icon-map): Add tool-bar entry
for mh-toggle-tick.
(mh-xemacs-toolbar-toggle-tick-icon): New constant.
* mh-customize.el: Add tool-bar entry for mh-toggle-tick.
2003-03-31 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-show-narrow-to-tick, mh-show-limit-map)
(mh-show-sequence-menu): Add new interactive function
mh-show-narrow-to-tick callable from the show buffer and arrange
for a key binding and a menu entry.
* mh-seq.el (mh-narrow-to-tick): New interactive function that
narrows to the tick sequence.
* mh-e.el (mh-folder-sequence-menu, mh-limit-map): Arrange for a
key binding and a menu entry for mh-narrow-to-tick.
* mh-comp.el (mh-letter-mode): Enable undo since we could be
reusing a show buffer where undo is disabled (closes SF #712777).
2003-03-31 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-sequence-menu): Add entry for mh-toggle-tick.
* mh-utils.el (mh-show-sequence-menu): Add entry for
mh-show-toggle-tick.
2003-03-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-delete-seq): If the tick sequence is killed with
"S k" then the highlighting wasn't getting removed. The change
fixes this.
2003-03-27 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-notate-user-sequences): Extend it so that only the
messages in a part of the folder are notated.
(mh-delete-msg-from-seq): Extend it so that it will delete all
messages in the marked region.
(mh-delete-a-msg-from-seq): New function that deletes a single
message from a sequence.
(mh-clear-text-properties): If there is a ticked unseen message
and the message is removed from the unseen list with "S d" then
unticking the message doesn't change the highlight. This change
fixes this.
2003-03-27 Peter S Galbraith <psg@debian.org>
* mh-xemacs-toolbar.el (mh-xemacs-toolbar-*-icon): Use original
24x24 icons, changing background only.
2003-03-27 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-junk.el (mh-spamassassin-identify-spammers): Remove unused
variable buffer-exists.
(mh-spamassassin-identify-spammers): Remove unused variable user.
* mh-customize.el (mh-junk-choose): Tweak it to remove XEmacs
compiler warning.
2003-03-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-print-scan-lines): Handling of a boundary
condition when messages from the last source folder had been
removed was incorrect. This caused a folder header to appear
without any messages listed under it. This change fixes this.
(mh-thread-forget-message): Remove the entry from the scan line
table as well. This is needed for proper display of threaded view
of index folders.
2003-03-26 Bill Wohler <wohler@newt.com>
* Makefile, README, import-emacs, mh-alias.el, mh-comp.el,
mh-customize.el, mh-e.el, mh-funcs.el, mh-identity.el,
mh-index.el, mh-loaddefs.el, mh-mime.el, mh-pick.el, mh-seq.el,
mh-speed.el, mh-utils.el, mh-xemacs-compat.el,
mh-xemacs-toolbar.el: Removed RCS keywords per Emacs conventions
(closes SF #680731).
2003-03-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el: Fix commentary to mention that mairix is supported
as well.
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-show-junk-blacklist, mh-show-junk-whitelist):
Interactive functions callable from the show buffer.
(mh-show-junk-map): Key bindings in show mode.
* mh-e.el (mh-junk-map): Key bindings to call spam program.
(mh-help-messages): Update help text.
* mh-customize.el (mh-junk): New customization group for spam
program interface.
(mh-junk-choice, mh-junk-function-alist, mh-junk-choose):
Functions and variables that decide which junk program is used.
(mh-junk-program, mh-junk-mail-folder): User customizable
variables that control the choice of spam program and the action
performed on received spam.
* Makefile (MH-E-SRC): Add mh-junk.el.
2003-03-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-show-toggle-tick, mh-show-mode-map): New
interactive function callable from the show buffer and a key
binding for it.
* mh-seq.el (mh-delete-seq): Remove highlight from tick sequence.
(mh-put-msg-in-seq): Disable adding messages to tick sequence.
(mh-widen): Reset mh-tick-seq-changed-when-narrowed-flag.
(mh-tick-add-overlay, mh-tick-remove-overlay, mh-notate-tick)
(mh-toggle-tick): New functions to highlight/unhighlight tick
sequence and the interactive function that is used to toggle
tick.
* mh-e.el (mh-tick-seq-changed-when-narrowed-flag): New variable
that remembers if we are narrowed to the tick sequence. In that
case the highlighting isn't shown, since it adds no extra info.
(mh-folder-mode): Initialize mh-tick-seq-changed-when-narrowed-flag.
(mh-notate-user-sequences): Notate the tick sequence.
(mh-internal-seq): Treat mh-tick-seq like an internal sequence.
(mh-delete-msg-from-seq): Don't allow deletion from tick sequence.
(mh-folder-mode-map): Add key binding for "'"
* mh-customize.el (mh-tick-seq, mh-folder-tick-face): New
customizable variables that contain the name of the tick sequence
and the face to use to highlight it.
2003-03-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-thread-print-scan-lines): New function which
prints out thread tree. It maintains the original folder info if
the folder was created by index search (closes SF #709672).
(mh-copy-seq-to-eob, mh-thread-inc, mh-thread-folder): Use
factored out function mh-thread-print-scan-lines.
(mh-toggle-threads): Since threading is allowed in index folders
there can be lines in the folder which aren't valid message scan
lines. So it is OK for mh-get-msg-num to fail once in a while.
* mh-index.el (mh-index-update-maps): Make the parsing of messages
that need to annotated with the X-MHE-Checksum header more robust.
If the search yielded no results then an error was being produced.
(mh-index-search): Enable automatic threading of index folders if
mh-show-threads-flag is non-nil (closes SF #709667).
(mh-index-next-folder): Relax error checking since index folder
can be threaded while the source folder info is visible.
(mh-index-group-by-folder): New function that is used in
mh-thread-folder to keep source folder info visible during
threading.
2003-03-25 Bill Wohler <wohler@newt.com>
* mh-loaddefs.el: Regenerated.
* mh-customize.el (mh-index-new-messages-folders): New variable
that controls which folders "F n (mh-index-new-messages)"
accesses. Was mh-flists-search-folders.
* mh-index.el (mh-flists-search-folders): Still used internally,
but users now use new option mh-index-new-messages-folders.
Removed documentation since to avoid duplication with
mh-index-new-messages-folders.
(mh-flists-recursive-search-flag): Deleted. Use
mh-recursive-folders-flag instead.
(mh-flists-execute): Updated docs to specify which global
variables are used. Use mh-recursive-folders-flag instead of
mh-flists-recursive-search-flag.
(mh-index-new-messages): Edited doc, and refer to new option
mh-index-new-messages-folders. Ditto within code. Don't need to
prepend + to folder name as flists does that for us. Use
2003-03-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-refile-msg): Add optional argument that controls
whether mh-last-destination-folder is updated or not.
2003-03-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-tool-bar-define): Fix a problem in the
XEmacs version which caused the show mode toolbar to have the
buttons in the reverse order. Also the add-hooks are no longer
needed since mh-toolbar-init is called in the appropriate modes.
* mh-comp.el (mh-letter-mode): Call mh-toolbar-init in XEmacs to
initialize toolbar.
* mh-utils.el (mh-show-mode): Same as above.
* mh-e.el (mh-folder-mode): Same as above.
2003-03-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-exec-cmd-env-daemon): New function which
executes a command asynchronously with its own environment.
* mh-comp.el (mh-redistribute): The function has been modified so
that /bin/sh isn't used to run send. It has also been refactored
so that the same code isn't repeated.
2003-03-21 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-invisible-header-fields): Added X-Bogosity
for bogofilter.
2003-03-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-xemacs-toolbar.el: Remove the code since that gets generated
when mh-tool-bar-define is expanded.
(mh-xemacs-icon-map): A alist to map GNU Emacs icon names to the
actual icons to be used in XEmacs. This is used in
mh-tool-bar-define.
* mh-customize.el (mh-toolbar): Use this group in XEmacs as well.
(mh-tool-bar-item-*): All these constants have been removed since
they aren't needed in the new scheme.
(mh-tool-bar-reply-3-buttons-flag): This variable has been
removed.
(mh-tool-bar-search-function): This is now used in XEmacs as well.
(mh-tool-bar-folder-set, mh-tool-bar-folder-buttons-set)
(mh-tool-bar-letter-buttons-set, mh-tool-bar-show-set)
(mh-tool-bar-letter-set): These functions aren't defined at the
top level any more.
(mh-tool-bar-reply-generator): A macro to generate the required
functions for the three reply buttons.
(mh-tool-bar-search, mh-tool-bar-customize)
(mh-tool-bar-folder-help, mh-tool-bar-letter-help)
(mh-tool-bar-reply-from, mh-show-tool-bar-reply-from)
(mh-tool-bar-reply-to, mh-show-tool-bar-reply-to)
(mh-tool-bar-reply-all, mh-show-tool-bar-reply-all): New
interactive functions that are called when tool bar buttons are
clicked.
(mh-xemacs-use-toolbar-flag, mh-xemacs-toolbar-position):
Additional customizable variables that are present only for
XEmacs.
(mh-tool-bar-define): A macro that generates the required code
for GNU Emacs and XEmacs tool bar.
(mh-tool-bar-define): Define the MH-E tool bar.
2003-03-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-notate-cur): Notate current message only if it
hasn't been marked for deletion or refiling.
2003-03-15 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-invisible-header-fields): Added
X-Spam-Checker-Version.
(mh-auto-fields-list): checkdoc fix.
2003-03-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-new-messages): If the destination folder
where the unseen messages are supposed to be copied to was
already present, but MH-E doesn't have it open, then a new folder
was being created. The change fixes this.
(mh-index-update-unseen, mh-flists-recursive-search-flag): Fix
checkdoc warnings.
* mh-loaddefs.el: Regenerated.
2003-03-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-flists-results-folder): Subfolder under
+mhe-index where the results of the flists call is put.
(mh-index-generate-pretty-name): Make sure that normal index
searching will never use the folder reserved for the flists
results.
(mh-index-search): Add an extra parameter that marks all the
messages in the index folder to the unseen sequence.
(mh-index-update-unseen): Function to keep unseen sequence of
index folder synced with the actual folders from where the
messages were copied. This works only if the unseen messages are
displayed with mh-show. Killing the unseen sequence in the index
folder or adding/removing messages to it doesn't change the
unseen sequence in the source folders yet.
(mh-flists-search-folders): Variable that decides the folders on
which flists is run.
(mh-flists-recursive-search-flag): If non-nil, flists is passed
the -recurse option.
(mh-flists-execute): Function which uses /bin/sh to execute
flists and then print out the list of message files that match.
(mh-index-new-messages): New interactive function which searches
for messages in the unseen sequence (closes SF #701756).
* mh-utils.el (mh-show-folder-map): Add binding for
mh-index-new-messages.
(mh-show-msg): Update the unseen sequence in the source folder.
* mh-e.el (mh-folder-font-lock-unseen): The function assumes that
the end of buffer is reached when there isn't a valid scan line
on the current line. This doesn't work in the index folder since
we have lines containing the folder name and empty lines in
between the actual scan lines. The modification removes this
assumption.
(mh-folder-map): Add key binding for "Fn"
* mh-seq.el (mh-iterate-on-messages-in-region): If the point is
not at the beginning of the line, then the first message in the
region would be missed. The fix avoids this.
* mh-mime.el (mh-inline-vcard-p): Don't try to inline vcards if
we don't have the right libraries.
2003-03-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-next-undeleted-msg, mh-previous-undeleted-msg)
(mh-next-msg): Add optional argument wait-after-complaining-flag.
If non-nil and there are no undeleted messages after (or before)
the current one, then pause for a second after printing out the
message.
(mh-refile-or-write-again): Modify call to mh-next-msg to use the
wait-after-complaining-flag.
2003-03-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-refile-or-write-again): If mh-next-msg fails to find
a message to go to it prints out a diagnostic, which overwrites
the diagnostic about the folder the message was refiled to. The
change fixes this.
2003-03-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-widen, mh-narrow-to-seq): Update
mh-narrowed-to-seq before notating sequences. This is a bit
helpful for mh-tick.el.
(mh-put-msg-in-seq): Fix a minor bug. No internal sequence should
be notated -- the original code was doing the right thing only for
the "unseen" sequence.
* mh-index.el (mh-index-choose): Add autoload cookie for
mh-index-choose. This is needed for GNU Emacs 20.5.
* mh-loaddefs.el: Regenerated.
2003-03-09 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-display-smileys): This function originally had a
test to see if font-lock-maximum-size was bound, but this was
recently removed. The test was put in for a reason; if
font-lock-maximum-size isn't bound, void-variable errors would
ensue. I put the bound test back in.
2003-03-08 Steve Youngs <youngs@xemacs.org>
* mh-mime.el (mh-mime-security-button-map): Use 'mh-push-button'
in XEmacs as well.
2003-03-07 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-xemacs-toolbar.el: Declare a whole bunch of stuff for GNU
Emacs, so that we don't get so many compiler warnings. Also
surround calls to set-specifier and toolbar-make-button-list with
mh-funcall-if-exists. Maybe GNU Emacs shouldn't try to compile
this file in the first place.
* mh-xemacs-compat.el (mh-modeline-glyph): Declare it within
mh-do-in-xemacs to avoid compiler warning in GNU Emacs.
(mh-xemacs-push-button): Removed.
* mh-mime.el (mh-mime-button-map): Use the generalized
mh-push-button function.
(mh-push-button): Enhance it so that it works on XEmacs too.
2003-03-08 Steve Youngs <youngs@xemacs.org>
* mh-xemacs-compat.el (mh-modeline-logo): New constant holding the
modeline image.
(mh-modeline-glyph): Use it.
2003-03-08 Steve Youngs <youngs@xemacs.org>
* mh-xemacs-toolbar.el: New file that defines and displays a
toolbar in XEmacs.
* mh-xemacs-compat.el (mh-xemacs-toolbar): Require it here.
* Makefile (MH-E-SRC): Add mh-xemacs-toolbar.el.
* mh-customize.el (mh-toolbar):
(mh-tool-bar-letter-buttons):
(mh-tool-bar-letter-buttons-set):
(mh-tool-bar-folder-buttons):
(mh-tool-bar-folder-buttons-set):
(mh-tool-bar-search-function):
(mh-tool-bar-reply-3-buttons-flag):
(mh-tool-bar-item-inc):
(mh-tool-bar-item-save-mime):
(mh-tool-bar-item-prev-msg):
(mh-tool-bar-item-page-msg):
(mh-tool-bar-item-next-msg):
(mh-tool-bar-item-delete):
(mh-tool-bar-item-refile):
(mh-tool-bar-item-undo):
(mh-tool-bar-item-perform):
(mh-tool-bar-item-toggle-show):
(mh-tool-bar-item-reply-from):
(mh-tool-bar-item-reply-to):
(mh-tool-bar-item-reply-all):
(mh-tool-bar-item-reply):
(mh-tool-bar-item-alias):
(mh-tool-bar-item-compose):
(mh-tool-bar-item-rescan):
(mh-tool-bar-item-repack):
(mh-tool-bar-item-search):
(mh-tool-bar-item-visit):
(mh-tool-bar-item-prefs):
(mh-tool-bar-item-help):
(mh-tool-bar-item-widen):
(mh-tool-bar-item-send):
(mh-tool-bar-item-attach):
(mh-tool-bar-item-spell):
(mh-tool-bar-item-save):
(mh-tool-bar-item-undo-op):
(mh-tool-bar-item-kill):
(mh-tool-bar-item-copy):
(mh-tool-bar-item-paste):
(mh-tool-bar-item-kill-draft):
(mh-tool-bar-item-comp-prefs):
The MH-E toolbar for XEmacs is defined differently from the
GNU/Emacs version, so only define these if we're in GNU/Emacs.
XEmacs doesn't need to see them and it's always good to cut down
on pollution.
2003-03-08 Steve Youngs <youngs@xemacs.org>
* mh-mime.el (mh-mime-button-map): Bind the 2nd mouse button to
`mh-xemacs-push-button' in XEmacs.
(mh-mime-security-button-map): Ditto.
* mh-xemacs-compat.el: Shush the byte-compiler.
(mh-xemacs-push-button): New function to make MIME buttons work in
XEmacs.
2003-03-08 Steve Youngs <youngs@xemacs.org>
* mh-mime.el (mh-display-emphasis): Don't test
`font-lock-maximum-size' to see if it is bound, just test for a
non-nil value. This variable can have a nil value which makes it
bound and dividing nil by 8 throws an error.
This fixes a bug in MH-E under XEmacs when
`font-lock-maximum-size' is nil that prevented article emphasis
and smiley display which in turn was causing the "Flush changes in
article x y/n" errors.
(mh-display-smileys): Ditto.
2003-03-08 Steve Youngs <youngs@xemacs.org>
* mh-utils.el (mh-logo-display): Display logo in XEmacs as well.
* mh-xemacs-compat.el (mh-modeline-glyph): New. The MH-E modeline
logo for XEmacs.
2003-03-06 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-allow-root-folder-flag): New global variable
that decides if "+" is an acceptable folder name.
(mh-folder-completion-function): Refine the test for existing
folders to take mh-allow-root-folder-flag into account.
(mh-folder-completing-read, mh-prompt-for-folder): Use the
allow-root-folder-flag argument of mh-prompt-for-folder and add a
similar argument to mh-folder-completing-read.
(mh-exec-cmd-error): Make the function nicer by using
process-environment to pass the environment variable assignments.
2003-03-05 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-push-button): Preserve point in the show buffer
if the mouse is used to expand/contract a button.
* mh-customize.el (mh-x-face-file): Mention X-Image-URL in
documentation.
* mh-comp.el (mh-insert-x-face): Modified to allow insertion of
X-Image-URL header field.
2003-03-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-face-display-function): Modified to facilitate
display of X-Image-URL images.
(mh-find-path): Initialize X-Image-URL cache directory.
(mh-x-image-url-cache-canonicalize, mh-x-image-url-fetch-image)
(mh-x-image-scale-and-display, mh-x-image-url-display)
(mh-x-image-display): New functions for X-Image-URL image display
and cache management.
* mh-customize.el (mh-show-use-xface-flag): Add info about
requirements for X-Image-URL display.
(mh-fetch-x-image-url): New customizable variable that controls
fetching of X-Image-URL.
2003-03-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-make-local-hook): New macro which works around
API changes in add-hook. Version of GNU Emacs before 21.1 and
XEmacs require a call to make-local-hook and just the LOCAL
argument of add-hook is not sufficient.
(mh-show-mode): Make kill-buffer-hook buffer local.
* mh-e.el (mh-folder-mode): Same as above.
* mh-comp.el (mh-compose-and-send-mail): Same as above.
2003-03-02 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-push-button): Clicking on a MIME button used to
cause the window with the show buffer to be selected. With this
change the selected window doesn't change.
2003-03-01 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-flists): Avoid a potential race condition.
When flists is called manually, or when an unseen message is read,
mh-speed-partial-line was not reinitialized.
* mh-e.el (mh-visit-folder): If mh-visit-folder is used to visit
the folder currently being visited (effectively doing a rescan)
then mh-previous-window-config is erroneously set. The change
fixes this.
* mh-customize.el (mh-index-show-hook): Remove unused variable.
2003-02-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-scan-folder): Call mh-reset-threads-and-narrowing
only after the user has replied to question. This avoids premature
clearing of the folder.
(mh-rescan-folder, mh-visit-folder): Remove calls to
mh-reset-threads-and-narrowing since it is now called in
mh-scan-folder anyway.
* mh-funcs.el (mh-sort-folder): Same as above.
2003-02-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-alias.el (mh-alias-alist): Change initial value to a symbol,
so that it is different from the empty list, which could also
mean that there are no aliases.
(mh-alias-reload-maybe): Change test so that empty alist of
aliases is properly handled (closes SF #693859).
2003-02-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-decode-message-header): The message header could
be encoded, for instance the author's name could contain
characters not in ASCII. This function will decode such header
fields.
(mh-mm-inline-message): Use mh-decode-message-header.
* mh-utils.el (mh-display-msg): Use mh-decode-message-header.
(mh-message-number-width): Use mh-scan-prog instead of "scan".
* mh-loaddefs.el: Regenerated.
2003-02-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-truncate-log-buffer): Refine it so that the
function will do the right thing even if called from a buffer
other than mh-log-buffer.
2003-02-22 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-add-alias): Really fix SF #690216.
This functions needs to strip brackets on standalone addresses as
well.
2003-02-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-xemacs-compat.el (replace-regexp-in-string): Remove the
definition since it isn't used any more.
2003-02-20 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-which-file-has-alias): Bug fix. Needed to
specify `noerror' on search.
* mh-alias.el (mh-alias-suggest-alias): Add condition for input
string being an email address in brackets. We need to strip out
the brackets. (closes SF #690216)
2003-02-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-pick.el (mh-search-folder): The function was setting the
global value of the variables mh-current-folder and
mh-previous-window-config. This can lead to problems in code which
assumes that these variables are nil when we aren't in a folder
buffer. So make the variables local before setting them.
2003-02-19 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-mime-display): All the MIME display code has been
wrapped in a condition-case so that if something goes wrong, the
raw message will be displayed.
* mh-funcs.el (mh-undo-folder): Comment out call to sit-for that
seems unnecessary.
* mh-e.el (mh-scan-folder): Messages marked for deletion or
refiling weren't getting annotated properly. The change fixes
this.
(mh-process-or-undo-commands): Change prompt to reflect what
really happens in the code.
2003-02-18 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-folder-expand-at-point): The function
mail-abbrev-complete-alias often returns nil. This had the
unfortunate consequence of always causing an error. The change
fixes this.
* mh-alias.el (mh-alias-canonicalize-suggestion): New function
which obviates the our need replace-regexp-in-string.
(mh-alias-suggest-alias): Use mh-alias-canonicalize-suggestion to
eliminate calls to replace-regexp-in-string. This avoids problems
in Emacs20.
* mh-utils.el (mh-notate): Handle the case when nil is passed as
notation gracefully.
(mh-speed-flists-active-p): New function that returns non-nil if
flists is being used in the speedbar to update message counts.
* mh-seq.el (mh-put-msg-in-seq): Fix a bug which made it
impossible to add messages to the unseen sequence. Also adding
messages to the unseen sequence will now update the speedbar
message counts immediately.
* mh-e.el (mh-get-new-mail, mh-process-commands)
(mh-undefine-sequence): Update speedbar message counts, if the
speedbar is active and is displaying message counts.
(mh-delete-msg-from-seq): In addition to updating message counts,
unhighlight the message so that interactively removing messages
from the unseen sequence makes the bold highlight of unseen
messages in the scan buffer go away.
(mh-clear-text-properties): New function that removes all text
properties from the current scan line.
2003-02-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-face-display-function): Wrap call of
insert-image in mh-funcall-if-exists. This avoids a compiler
warning in Emacs20.
* mh-speed.el (mh-speed-flists): Weaken test a bit to avoid
compiler warning in Emacs20.
(mh-speedbar-change-expand-button-char): Wrap call of
speedbar-insert-image-button-maybe in mh-funcall-if-exists. This
function isn't present in the speedbar that ships with Emacs20, so
calling it there causes an error.
* mh-seq.el (mh-msg-is-in-seq): Adjust loop call a bit to avoid
compiler warning in XEmacs. The XEmacs compiler should be improved
so that such spurious warnings from builtin macros are suppressed.
* mh-index.el (mh-index-search): Same as above.
* mh-e.el (tool-bar-mode): The declaration is needed for Emacs20
too.
* mh-comp.el (mailabbrev): Try loading it any way. Some day XEmacs
will get it and then MH-E will just use it.
(tool-bar-mode, tool-bar-map): These declarations are needed for
Emacs20 too.
(mh-mail-abbrev-make-syntax-table, mh-folder-expand-at-point):
Remove mh-mail-abbrev-make-syntax-table since mh-funcall-if-exists
can be used instead.
* mh-alias.el (require): Avoid autoloading functions that may not
be defined.
(mh-read-address, mh-alias-letter-expand-alias): Rewrite using
mh-funcall-if-exists.
2003-02-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-speed.el (mh-folder-speedbar-buttons, mh-speed-add-buttons)
(mh-speed-toggle): Reuse markers instead of creating more of them.
(mh-speed-flists-folder, mh-speed-flists): Add optional folder
argument to mh-speed-flists so that message counts are updated
only for that one folder.
(mh-speed-parse-flists-output): If no change in counts then avoid
consing.
* mh-index.el (mh-index-execute): Rewritten to use a temporary
buffer that is not left behind.
* mh-funcs.el (mh-store-buffer): Use mh-log-buffer instead of the
special purpose *Store Output* buffer.
2003-02-14 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-show-xface-face): Make it always be black
foreground on a white background (the reverse of that can make
some X-Face images look creepy).
* mh-utils.el (mh-truncate-log-buffer): Modify the function to
return the current size of mh-log-buffer. Also we are now a bit
more careful in adding separators between consecutive messages.
(mh-exec-cmd): Fix a bug where the the log buffer would be
displayed even if no error happened in the current command but
the log buffer had messages from a previous error.
* mh-mime.el (mh-mime-save-parts): Use mh-log-buffer to show
error messages.
* mh-alias.el (mh-alias-local-users): Add a space between parens.
2003-02-14 Steve Youngs <youngs@xemacs.org>
* mh-utils.el (mh-face-display-function): Call
`x-face-xmas-wl-display-x-face' using `mh-funcall-if-exists'.
* mh-xemacs-compat.el (replace-regexp-in-string): New.
2003-02-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-log-buffer-lines): New variable that keeps
track of the number of lines to keep in mh-log-buffer.
(mh-truncate-log-buffer): New function that is used to make sure
that the log buffer doesn't grow to unbounded size.
(mh-exec-cmd, mh-exec-cmd-daemon, mh-handle-process-error): Use
mh-truncate-log-buffer instead of erase-buffer to keep some
number of previous log messages around (closes SF #685476).
2003-02-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (tool-bar-mode): Declare it in XEmacs.
(mh-folder-mode): Use mh-funcall-if-exists to call hl-line-mode.
* mh-utils.el (mh-funcall-if-exists): New macro that calls a
function only if it exists.
(mh-logo-display, mh-defun-show-buffer): Use mh-funcall-if-exists
to call the functions find-image and deactivate-mark.
* mh-mime.el (mh-mime-cleanup, mh-small-image-p)
(mh-mm-display-part): Use mh-funcall-if-exists to call the
functions image-size and remove-images.
* mh-comp.el (tool-bar-map, tool-bar-mode): Declare the variables
in XEmacs.
(mh-folder-expand-at-point): Use mh-funcall-if-exists to call
mail-abbrev-complete-alias if it exists.
* mh-alias.el (mh-read-address): Use mh-funcall-if-exists for
future extensibility.
2003-02-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-logo-display): The function find-image is
present only in GNU Emacs.
(mh-defun-show-buffer): The function deactivate-mark is present
only in GNU Emacs.
(default-enable-multibyte-characters): Declare it in XEmacs to
avoid compiler warning.
(mh-face-display-function): Avoid inserting space if there isn't
any Face or X-Face header field to display.
* mh-seq.el (mh-thread-last-ancestor): Move declaration of
variable before its first use to silence XEmacs warning.
* mh-mime.el (default-enable-multibyte-characters, dots, type):
Declare these in XEmacs to remove compiler warnings in XEmacs.
(mh-mime-cleanup, mh-mm-display-part): Call remove-images only in
GNU Emacs.
(mh-small-image-p): Call image-size only in GNU Emacs.
* mh-index.el (mh-mairix-next-result): Fix a bug where a quote
was missing.
(mh-swish++-regexp-builder): Remove the unused binding meta.
* mh-e.el (mh-folder-size): Pass on an extra value to remove
XEmacs warning.
(mh-folder-mode): Surround calls to hl-line-mode and
tool-bar-mode with mh-do-in-gnu-emacs since these functions
aren't present in XEmacs.
* mh-customize.el (mh-tool-bar-show-set, mh-tool-bar-letter-set)
(mh-tool-bar-folder-set): These functions call tool-bar-*
functions which are present only in GNU Emacs. So surround them
with mh-do-in-gnu-emacs.
* mh-comp.el (mh-letter-mode, mh-folder-expand-at-point): Only
call these functions in GNU Emacs.
(mail-abbrevs): Declare it in XEmacs.
* mh-alias.el (mh-read-address): Call completing-read-multiple
only in GNU Emacs.
(mail-abbrevs): Declare it in XEmacs.
(mh-alias-add-alias-to-file): Remove unused code.
2003-02-14 Ville Skyttä <scop@xemacs.org>
* mh-comp.el: Add autoloaded auto-mode-alist association.
2003-02-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-face-display-function): Make the XEmacs part a
little simpler.
2003-02-14 Steve Youngs <youngs@xemacs.org>
* mh-customize.el (mh-show-xface-face): XEmacs doesn't have the
':inherit' keyword for defface, rewrite with sane defaults.
* mh-utils.el (mh-face-display-function): Fix bug that was
corrupting xface images when displayed with XEmacs' internal
xface image support. Also make XEmacs honour 'mh-show-xface-face'
when using internal xface image support.
2003-02-12 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-modify-header-field): New function. To header
FIELD add VALUE. If OVERWRITE-FLAG is non-nil then the old value,
if present, is discarded. This is more flexible than before.
(mh-insert-auto-fields): Use it. This and the new function are a
courtesy of Satyaki. Thanks!
* mh-customize.el (mh-auto-fields-list): Doc tweaks suggested by
Bill.
2003-02-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-folder-expand-at-point): Tweak the error
message. Completion in the Fcc header field is only supported in
GNU Emacs 21.
2003-02-12 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-auto-fields-list): Reorder after
`mh-identity-list' since it needs it to be defined. Move to
mh-identity customization group.
2003-02-11 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-insert-mail-followup-to-flag): Removed.
Obsolete.
(mh-insert-mail-followup-to-list): Removed. Obsolete. Use
`mh-auto-fields-list' instead, which is a more general solution.
(mh-auto-fields-list): New defcustom. Alist of addresses for
which header lines are automatically inserted. Replaces
`mh-insert-mail-followup-to-list'.
* mh-comp.el (mh-insert-mail-followup-to): Removed. Obsolete.
(mh-insert-auto-fields): New function. Insert custom fields if To
or Cc match `mh-auto-fields-list', replacing
mh-insert-mail-followup-to with a more general solution.
(mh-compose-and-send-mail): Call mh-insert-auto-fields instead of
mh-insert-mail-followup-to. Also don't call mh-insert-identity to
insert default setting if mh-insert-auto-fields inserted an
identity.
2003-02-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-xface-function): Try to load the external
x-face library only if XEmacs doesn't have xface support.
(mh-face-display-function): Renamed. Also handle various
permutations of x-face and xface support in XEmacs better.
* mh-customize.el (mh-show-use-xface-flag): Any emacs whose
major version is greater than or equal to 21 supports display of
X-Face and Face header fields.
2003-02-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-do-in-gnu-emacs, mh-do-in-xemacs): Macros that
execute code only in GNU Emacs and XEmacs respectively.
(mh-emacs21-face-display-function): Refactor to make it slightly
nicer. Get rid of compiler warnings in GNU Emacs by using the
above macros. Also check for presence of xface feature (in XEmacs
specific code) before trying to display X-Face header field image.
2003-02-11 Steve Youngs <youngs@xemacs.org>
* mh-customize.el (mh-show-use-xface-flag): If using XEmacs and
can't find the external x-face pkg still enable X-Face images if
feature 'xface is present.
Update the doc string.
* mh-utils.el (mh-emacs21-face-display-function): Make it work in
XEmacs.
(mh-show-xface-function): If using XEmacs without xface support,
use x-face.el pkg. If using XEmacs with xface support, or Emacs
21, use mh-emacs21-face-display-function.
2003-02-11 Mark D. Baushke <mdb@gnu.org>
* mh-customize.el (mh-invisible-header-fields): Add
"X-Notes-Item:" which is generated by Lotus Notes Domino. See
URL<http://www-12.lotus.com/ldd/doc/domino_notes/Rnext/help6_admin.nsf
/f4b82fbb75e942a6852566ac0037f284/5eda03c647f879c285256c1d00396051
?OpenDocument&Highlight=0,x-notes-item> for details on how Domino
users may disable (restore the default) generation of these headers.
2003-02-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-folder-expand-at-point): Add function doc string
and produce a nicer error message for Emacs versions that lack
mail-abbrev-complete-alias.
* mh-utils.el (mh-handle-process-error): Check doc fix.
* mh-e.el (mh-folder-from-address): Same as above.
2003-02-10 Peter S Galbraith <psg@debian.org>
* mh-comp.el: require mailabbrev, except in XEmacs.
(mh-mail-abbrev-make-syntax-table): New defmacro to call
mail-abbrev-make-syntax-table introduced in Emacs21.
(mh-folder-expand-at-point): Handle nested folders.
All of the above was written by Satyaki. I just applied the patch
and tested.
2003-02-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el: Fixes to keep the byte compiler happy.
* mh-customize.el (mh-invisible-header-fields): Modified to
remove space after ":" in header field names.
2003-02-09 Peter S Galbraith <psg@mixed.dyndns.org>
* mh-comp.el (mh-letter-complete): Add completion for fcc lines.
(mh-folder-expand-at-point): Do completion at point for folder
name. Like `mh-alias-letter-expand-alias' for aliases, it doesn't
work on XEmacs because it relies on `mail-abbrev-complete-alias'
to do completion. Maybe Steve could update XEmacs' mailabbrev.el?
2003-02-09 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-invisible-header-fields): Remove trailing
space in "X-Face: " and "Face: " entries since those line often
break there.
2003-02-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-emacs21-face-display-function): Use
mh-show-xface-face to colorize X-Face image.
* mh-customize.el (mh-invisible-header-fields): Add extra headers
to ignore.
(mh-show-xface-face): Allow customization of the X-Face colors.
2003-02-07 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-uncompface-executable, mh-uncompface): Remember
the path of the uncompface executable so that we don't need to
search for it every time.
(mh-emacs21-face-display-function): If more than one X-Face (or
Face) header field was present then the fields would get
concatenated, leading to garbled output. The change only displays
the first image.
* mh-customize.el (mh-x-face-file): Change documentation since it
can now be used to insert a Face header field.
* mh-comp.el (mh-insert-x-face): Generalized to allow insertion
of Face header field.
2003-02-06 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-emacs21-face-display-function): Updated
docstring. It is a common mistake to refer to a header field as a
header. The term header refers to the entire header while the term
header field refers to a single field.
* mh-customize.el (mh-show-use-xface-flag): Ditto.
2003-02-06 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-xface-function): Modified to use
mh-emacs21-face-display-function if we are running GNU Emacs 21.
(mh-face-to-png): New function to convert a Face header to a png
image.
(mh-uncompface): New function which converts an X-Face header to
a pbm image.
(mh-icontopbm): New function that does the job of icontopbm.
(mh-emacs21-face-display-function): New function that displays
Face/X-Face image in GNU Emacs 21.
(mh-show-xface): Modified to test if we are running in X.
Otherwise face display is suppressed.
* mh-customize.el (mh-show-use-xface-flag): Tweak it, now that
MH-E supports face display natively on Emacs 21. Also remove the
check for window-system since it doesn't belong in a customizable
variable.
2003-02-06 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (sendmail): Require it so that XEmacs can find
rfc822-goto-eoh.
(mh-mail-header-end): A substitute for mail-header-end that
doesn't widen the buffer. This is essential to avoid problems when
dealing with nested messages.
(mh-in-header-p, mh-letter-header-font-lock)
(mh-header-field-font-lock, mh-show-font-lock-fontify-region)
(mh-show-unquote-From): Use mh-mail-header-end instead of
mail-header-end.
* mh-mime.el (mh-decode-message-body): same as above (closes SF
#681518).
* mh-comp.el (mh-yank-cur-msg): same as above.
2003-02-05 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-display-msg): Call mh-show-mode before invisible
headers are cleaned. This means that any surviving X-Face header
can be removed unconditionally in mh-clean-msg-header.
(mh-clean-msg-header): Since the function is now called with a
read-only buffer, make the buffer temporarily writable.
* mh-mime.el (mh-mm-inline-message): Do X-Face display before
invisible headers are removed.
* mh-customize.el (mh-invisible-headers): Simplified since the
X-Face header isn't treated specially any more.
(mh-invisible-header-fields): Add Face: and X-Face: to list of
invisible headers.
* mh-mime.el (mh-mime-display): If body is empty the headers would
be treated like the body. The change fixes this (closes SF #681162).
(mh-mime-display): This change really fixes the above problem.
2003-02-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-current-folder-name): Global variable that
keeps track of current folder.
(mh-normalize-folder-name): Substitute @ with
mh-current-folder-name (closes SF #666774).
(mh-prompt-for-folder): Bind mh-current-folder-name. Also
invalidate cache if we are visiting a folder that wasn't found in
the sub-folder cache. This is an indication that folders may have
been created outside of MH-E and so the cache may be stale.
2003-02-03 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-decode-content-transfer-encoded-message): Removed.
(mh-display-msg): Remove the use of the above function.
(mh-normalize-folder-name): Leading "/" characters were being
lost. The change fixes this (closes SF #676890).
* mh-mime.el (mh-decode-message-body): New function, factored out
from mh-mime-display and enhanced, to decode message based on
charset and content-transfer-encoding. This eliminates the need
for the external mimencode (closes SF #674857).
(mh-mime-display): Use mh-decode-message-body.
* mh-e.el (mh-header-display): Don't need the binding since the
variable isn't present any more.
(mh-inc-folder): Avoid calling mh-show if point is not on a valid
scan line (closes SF #678115).
* mh-customize.el
(mh-decode-content-transfer-encoded-message-flag): Removed.
2003-02-03 Bill Wohler <wohler@newt.com>
* import-emacs: MH-E now has its own directory in Emacs.
* mh-e.el: (mh-version): Set to 7.2+cvs.
2003-02-03 Bill Wohler <wohler@newt.com>
Released MH-E version 7.2.
* MH-E-NEWS, README: Updated for release 7.2.
* mh-e.el (Version, mh-version): Updated for release 7.2.
2003-02-03 Bill Wohler <wohler@newt.com>
* Makefile (dist): mkdir needs to happen *before* files are
copied.
* MH-E-NEWS: Fixed some awkward verbiage.
2003-02-02 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-invisible-headers): Surround regexp-opt
expression in parens to avoid problems viewing certain messages.
2003-01-30 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-flists): Search for flists in mh-progs.
The original was inadvertently searching for flists in the user's
path.
2003-01-27 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-default-folder-must-exist-flag): Changed
default to t according to the principle of least surprise.
2003-01-26 Bill Wohler <wohler@newt.com>
* mh-utils.el: Checkdoc fixes.
* mh-pick.el (mh-do-search, mh-search-folder): Checkdoc fixes.
* mh-loaddefs.el: Regenerated (lm-verify fixes).
* mh-index.el (mh-mairix-next-result): Checkdoc fixes.
* mh-alias.el: lm-verify fix.
* Makefile (MH-E-SRC): Added ChangeLog, now that Emacs has a
lisp/mh-e directory.
(MH-E-ETC-ETC): Removed ChangeLog.
(dist): Moved creation of mail directory next to copy of files
into mail directory.
(install-emacs): Copy $(MH-E-SRC) into new directory
$(EMACS_HOME/lisp/mh-e.
(MH-E-SRC): Moved ChangeLog into new variable MH-E-OTHERS and
include MH-E-LOADDEFS there too.
(mh-loaddefs.el): Added lines so that lm-verify passes.
(dist, install-emacs): Use MH-E-OTHERS instead of MH-E-LOADDEFS.
2003-01-26 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-tidy-draft-buffer, mh-compose-and-send-mail):
Rename mh-kill-draft-hook to mh-tidy-draft-buffer.
2003-01-25 Jeffrey C Honig <jch@honig.net>
* mh-utils.el (mh-exec-cmd, mh-exec-cmd-daemon)
(mh-process-daemon): Use mh-log-buffer for the output of commands
from mh-exec-cmd.
* mh-utils.el (mh-temp-folders-buffer): Sequences and folders
loose the -temp from their buffer names as they are interesting to
the user.
* mh-seq.el (mh-list-sequences): New name, mh-sequences-buffer as
it is intended to be interesting to the user.
* mh-funcs.el (mh-list-folders): New name, mh-folders-buffer as it
is intended to be interesting to the user.
* mh-comp.el (mh-check-whom, mh-compose-and-send-mail): Use
mh-recipients-buffer constant. Add a kill buffer hook to delete
the recipients buffer when a draft buffer is killed.
2003-01-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-customize): New interactive argument
deletes other windows.
(mh-tool-bar-show-set, mh-tool-bar-letter-set)
(mh-tool-bar-folder-set): Modified so that clicking the customize
and help buttons deletes the other windows in the frame.
* mh-mime.el (mh-mm-inline-message): Remove unused code.
* mh-seq.el (mh-notate-deleted-and-refiled): Fix a small bug where
the wrong notation was being used.
(mh-toggle-threads): The function had a bug if you did the
following starting from an unthreaded wide folder:
(1) Create a sequence with S p
(2) Narrow to new sequence with S n
(3) Thread narrowed folder with T t
(4) Kill sequence with S k
(5) Unthread narrowed folder with T t
At this point we would have an empty folder. The change fixes
this.
(mh-toggle-threads): Fix documentation.
* mh-customize.el (mh-invisible-header-fields): Add
X-MHE-Checksum to invisible headers.
* mh-comp.el (mh-insert-x-mailer): Slightly more informative
X-Mailer header.
2003-01-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-header-display): Modified so that quoted-printable
or base64 encoded messages are left untouched.
* mh-utils.el (mh-decode-content-transfer-encoded-message): Munge
the Content-Transfer-Encoding header so that the MIME decoding
routines of Gnus doesn't get confused.
(mh-display-msg): Use insert-file-contents-literally so that
display will work for non-ascii.
* mh-mime.el (mh-mime-display): Use charset info to decode
message file (closes SF #655123).
2003-01-24 Bill Wohler <wohler@newt.com>
* mh-alias.el (mh-alias-add-alias-to-file): Removed period from
error message and added parens around error function.
2003-01-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-decode-quoted-printable-flag): Removed.
(mh-decode-content-transfer-encoded-message-flag): This replaces
mh-decode-quoted-printable-flag.
* mh-utils.el (mh-decode-content-transfer-encoded-message): New
function which handles messages that are encoded as base64 or
quoted-printable (closes SF #674190).
(mh-decode-quoted-printable): Removed.
(mh-display-msg): Use mh-decode-content-transfer-encoded-message
instead of mh-decode-quoted-printable.
2003-01-23 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate-scan-lines): Fix a little bug
that would occasionally cause angles ('<' and '>') to appear at
root level.
2003-01-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-notate-cur): Enable overlay arrow display in text
mode too.
* mh-e.el (mh-folder-mode): Initialize overlay-arrow-string so
that a '>' is displayed in text mode.
2003-01-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-scan-msg-overflow-regexp): Change the variable
so that a space is always maintained in the beginning of the scan
line.
* mh-seq.el (mh-notate-seq, mh-notate-cur): Make the functions
faster by cutting down on the use of mh-goto-msg.
(mh-toggle-threads): Add call to mh-notate-cur, since inserting
the folder names in a search results folder screws up the
location of the overlay arrow.
* mh-index.el (mh-index-delete-folder-headers): Position the
point on a message line if possible.
* mh-funcs.el (mh-copy-msg): Use the mh-iterate macro to make the
function faster.
* mh-e.el (mh-scan-folder): Reuse mh-notate-deleted-and-refiled.
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-add-msgs-to-seq): Add a new parameter that
suppresses the annotation of the sequence since it is
inefficient.
* mh-seq.el (mh-delete-seq): Speed up the part of the function
that removes the sequence notation.
(mh-put-msg-in-seq, mh-notate-deleted-and-refiled): Use
mh-iterate-on-messages-in-region to make the function fasters when
operating on regions. The key idea is to loop over the folder
buffer exactly once and do all annotations. The existing algo
would walk over the buffer multiple times thereby slowing things
down.
(mh-iterate-on-messages-in-region): Added an extra parameter which
is bound to the message index as the loop is executed.
(mh-region-to-msg-list, mh-thread-delete, mh-thread-refile): Use
the new mh-iterate-on-messages-in-region macro.
* mh-e.el (mh-delete-msg-no-motion, mh-refile-msg, mh-undo): Same
as above.
(mh-notate-user-sequences): Change algorithm to make notating of
user sequences fast.
2003-01-19 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-logo.xpm: New image file that contains the MH-E logo.
Change foreground color to the blue in the MH-E logo.
* Makefile (MH-E-IMG): Add mh-logo.xpm to list of image files.
* mh-utils.el (mh-show-buffer-mode-line-buffer-id): Adjust it to
keep space in the beginning for the logo.
(mh-logo-cache): New variable that caches the logo image file
location.
(mh-logo-display): Display the MH-E logo on the mode line.
(mh-display-msg): Display logo in mh-show-mode.
* mh-e.el (mh-make-folder-mode-line): Display logo in
mh-folder-mode.
* mh-comp.el (mh-compose-and-send-mail): Display logo in
mh-letter-mode.
* mh-loaddefs.el: Regenerated.
* mh-seq.el (mh-iterate-on-messages-in-region): New macro to
iterate on all messages in a region.
(mh-region-to-msg-list): Simplified since it uses
mh-iterate-on-messages-in-region now.
* mh-e.el (mh-delete-msg, mh-refile-msg): Change interactive spec
to pass the region that is to be deleted when appropriate.
(mh-delete-msg-no-motion, mh-refile-msg, mh-undo): Operate on
regions directly without creating the list of messages to be
deleted/refiled.
(mh-delete-a-msg, mh-refile-a-msg, mh-undo-msg): The msg
parameter in these functions can now be nil. If so, the current
message is deleted, refiled or undone respectively. Avoids the
use of mh-goto-msg in this case and speeds up operations on
regions quite a bit.
2003-01-19 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-read-address): Bug Fix. In XEmacs and Emacs20,
it would always prompt using "To: " instead of using the command
argument (closes SF #670913).
2003-01-19 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-folder-completion-function): If there is a
+foo/bar folder and the user types foo//bar then the completion
function would say a match happened without showing the
normalized folder name. This change fixes that.
2003-01-18 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-rmail): Modified so that new and unseen messages
are shown (closes SF #667542).
2003-01-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-generate-pretty-name): Generate nicer
names. In particular all '-' characters are removed.
2003-01-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-index-program): Documentation fix.
* mh-loaddefs.el: Regenerated.
* mh-customize.el (mh-index-program): Add choices for mairix and
pick.
* mh-index.el (mh-indexer-choices): Add search interfaces for
mairix and pick.
(mh-index-search): Add links for mairix and pick.
(mh-index-pick-folder, mh-pick-binary): Variables needed to
implement pick support.
(mh-pick-execute-search, mh-pick-next-result): New functions to
implement pick support.
(mh-mairix-binary, mh-mairix-directory, mh-mairix-folder): New
variables for mairix support.
(mh-mairix-execute-search, mh-mairix-next-result)
(mh-mairix-regexp-builder, mh-mairix-convert-to-sop*): New
functions for mairix.
* mh-funcs.el (mh-kill-folder): Move message to the end.
* mh-e.el (mh-folder-mode): Make overlay-arrow-position and
overlay-arrow-string local variables so that the arrow will
remain even if some other folder is visited.
(mh-remove-cur-notation, mh-remove-all-notation): The test isn't
required any more since overlay-arrow-position is local.
(mh-goto-cur-msg): Remove overlay arrow if current message
doesn't exist.
* mh-seq.el (mh-notate-cur): Don't need to set
overlay-arrow-string any more since it is local and has been set
at initialization.
2003-01-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-current-folder): Keep track of current
folder when flists is called.
(mh-speed-flists, mh-speed-parse-flists-output): Try to avoid
ambiguity when folders are present with + at the end of the name.
Unfortunately it can't always be avoided.
* mh-e.el (mh-folder-size): Remove the unnecessary error check.
(mh-parse-flist-output-line): Add extra argument which
occasionally avoid problems with folder names that end with '+'.
* mh-utils.el (mh-sub-folders-actual): Fix the folder name
parsing so that it doesn't get confused by trailing '+' chars in
the folder name.
2003-01-14 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-normalize-folder-name): Enhanced so that it can
now handle ".." and "." correctly during folder name completion.
(mh-normalize-folder-name): Avoid error in boundary condition
where the folder string is empty.
2003-01-14 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (mh-visit-folder): Pass `current-prefix-arg' to
the `mh-read-msg-range' function as the optional
always-prompt-flag.
2003-01-14 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-normalize-folder-name): New function that
normalizes folder names.
(mh-sub-folders): Use mh-normalize-folder-name. Also the function
has been modified so that a trailing slash is only added if the
folder potentially has subfolders.
(mh-sub-folders-actual): Simplified since the folder has already
been normalized in mh-sub-folders.
(mh-remove-from-sub-folders-cache): Modified so that the cached
results of two of the folders ancestors are invalidated.
(mh-folder-completion-map): Ugly hack to make the error go away
when minibuffer-complete-word is called.
(mh-folder-completion-function): The completion function will now
be more selective in adding '/' at the end of completed folder
names.
(mh-folder-completing-read): The folder name is normalized before
return. The minibuffer-local-completion-map is shadowed to avoid
error with SPC (bound to minibuffer-complete-word). We really
need a better solution.
2003-01-13 Bill Wohler <wohler@newt.com>
* mh-seq.el: Edited comment and docstring text to conform with RFC
2822 terminology. Message-ID is the header field. It contains a
message identifier.
2003-01-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-sub-folders): Add an argument that returns
sub-folders with a / character appended at the end.
(mh-folder-completion-function): Modify the function so that one
tab is now sufficient to complete the folder name and add a
trailing /.
(mh-folder-completing-read): Remove the trailing / that the
completion function now adds to the folder name. Also multiple /
characters in the folder input are removed. So if the user inputs
+foo///bar//baz///// then that will be converted to +foo/bar/baz.
This will improve the performance of caching.
* mh-seq.el (mh-notate-cur): Check that a valid current message
exists before trying to notate (closes SF #667331).
(mh-message-id-regexp): New variable to store regexp to recognize
message-ids.
(mh-thread-generate): Use mh-message-id-regexp to filter out non
message-id's from the References: header.
2003-01-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-notate-cur): Disable overlay-arrow display if we
aren't on a graphic display.
2003-01-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-notate-cur): New function to notate the current
message. The marker in the fringe is updated too.
(mh-narrow-to-seq, mh-widen, mh-thread-inc, mh-thread-folder): Use
the specialized function mh-notate-cur instead of mh-notate-seq.
* mh-e.el (mh-arrow-marker): New buffer local variable to store
the position where the marker in the fringe is going to be
displayed (closes SF #664824).
(mh-folder-mode): Create a marker for the fringe.
(mh-update-sequences, mh-get-new-mail, mh-goto-cur-msg): Call the
specialized function mh-notate-cur instead of mh-notate-seq or
mh-notate.
(mh-remove-cur-notation, mh-remove-all-notation): Reset the
overlay-arrow-position if needed.
* mh-loaddefs.el: Regenerated.
2003-01-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-remove-from-sub-folders-cache): Modified so that
creating nested folders doesn't produce inconsistent results.
(mh-prompt-for-folder): Remove call of mh-folder-list-change-hook.
* mh-funcs.el (mh-kill-folder): Don't ask for confirmation if
called on a folder holding index search results. Also the now
removed mh-folder-list-change-hook is called no more.
* mh-customize.el (mh-auto-folder-collect-flag)
(mh-folder-list-change-hook): Removed.
* mh-loaddefs.el: Regenerated.
2003-01-10 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-default-folder-must-exist-flag): New
variable to suppress suggested folder if the folder doesn't
already exist (closes SF #657096).
(mh-default-folder-list): New variable that
holds mapping between an address and the desired folder for
filing (closes SF #657096).
(mh-default-folder-prefix, mh-default-folder-must-exist-flag): In
docstring, refer to documentation for mh-prompt-for-refile-folder
and mh-folder-from-address.
(mh-highlight-citation-p, mh-compose-insertion,
(mh-insert-mail-followup-to-list, mh-index-program,
(mh-identity-default): Fixed case of tags.
* mh-e.el (mh-folder-from-address): Use new variable
mh-default-folder-must-exist-flag to return nil if this variable
is t and the folder doesn't already exist. In addition, can now
look up a default folder in the new variable
mh-default-folder-list (closes SF #657096).
(mh-prompt-for-refile-folder): In docstring, refer to
documentation in mh-folder-from-address.
* mh-index.el (mh-swish-execute-search): Changed \..* to \\..* in
the FileRules filename in the sample config file. Otherwise, the
users don't see the backslash at all, and no files are indexed!
(closes SF #665888).
2003-01-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-folder): Get headers for exactly the
messages that are present. If only messages 1-10 and 3800-3900
are being shown then we will now scan exactly those messages and
not the full range from 1-3900 as was being done earlier.
(mh-toggle-threads): When converting from threaded to normal view
only the messages present in the buffer are scanned. Earlier all
messages from the minimum to the maximum would be scanned (closes
SF #626117).
* mh-pick.el (mh-search-folder): Fix typo.
(mh-pick-do-search): Fix bug from cut and paste. Also set window
config properly.
* mh-utils.el (mh-prompt-for-folder): Add new argument to allow
it to accept + as a folder name. This allows the user to search
all folders when "Fs" is used.
* mh-pick.el (mh-search-folder): Fix interactive spec of function.
(mh-pick-do-search): Rewritten to call pick in one go. This will
make adding pick as a default index search program easier. Also
pick now accepts the same query syntax as the index search
programs (closes SF #664816).
(mh-next-pick-field): Removed.
(mh-pick-parse-search-buffer): New function to parse the search
buffer.
(mh-pick-construct-regexp, mh-pick-regexp-builder): New function
to produce a pick query from the parsed representation.
* mh-index.el (mh-index-do-search): Refactor the search pattern
parser into a new function and use that instead.
* mh-loaddefs.el: Regenerated.
2003-01-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-loaddefs.el: Regenerated.
* mh-utils.el (mh-remove-from-sub-folders-cache)
(mh-prompt-for-folder): Replace mh-update-sub-folders-cache with
mh-remove-from-sub-folders-cache.
(mh-exec-cmd-daemon): Mention set-process-filter in documentation.
* mh-pick.el (mh-searching-function): New buffer local variable
that keeps track of the default searching function to be used.
(mh-pick-mode): Make mh-searching-function buffer local.
(mh-search-folder): Set mh-searching-function to use pick.
(mh-search-folder, mh-pick-menu, mh-pick-mode-help-messages)
(mh-pick-mode, mh-do-pick-search, mh-pick-do-search): Rename
mh-do-pick-search to mh-pick-do-search. But keep
mh-do-pick-search as a deprecated function.
(mh-do-search): New interactive function that performs the
default search.
(mh-pick-mode-map): Update keymap.
* mh-index.el (mh-index-search): Set mh-searching-function to do
index search.
(mh-index-new-folder): Replace mh-update-sub-folders-cache with
mh-remover-from-sub-folders-cache.
* mh-funcs.el (mh-kill-folder): Same as above.
* mh-index.el (mh-index-evaluate, mh-swish++-regexp-builder):
Checkdoc fixes.
* mh-customize.el: Fixes to make byte compiler in CVS Emacs
perfectly happy.
2003-01-09 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-folder-from-address): New function that proposes the
name of a folder with an alias for the address in the current message.
(mh-prompt-for-refile-folder): Use it (closes SF #657096).
* mh-customize.el (mh-default-folder-prefix): New variable used by
mh-folder-from-address.
(mh-invisible-header-fields): Edited docstring.
* mh-alias.el (mh-alias-address-to-alias): Added ;;;###mh-autoload
cookie (used by mh-folder-from-address in mh-e.el). Edited text in
comment.
* mh-utils.el: Provided naming conventions for buffer and buffer
variable names.
(mh-temp-folders-buffer): Renamed buffer to " *mh-folders*".
(mh-temp-sequences-buffer): Renamed buffer to " *mh-sequences*".
(mh-info-buffer): Renamed from mh-temp-info-buffer.
(mh-log-buffer): New buffer variable to hold name of "*MH-E Log*"
buffer which is expected to be used for the output of MH commands.
Perhaps we always create this buffer at initialization and append
to it rather than erase it each time?
* mh-e.el (mh-quit): Loop over all buffers and delete MH-E
temporary and working buffers. As long as the buffer naming
conventions are followed, new buffers will be automatically
killed.
(mh-version): Renamed mh-temp-info-buffer to mh-info-buffer.
* mh-comp.el (mh-insert-x-mailer): Renamed mh-temp-info-buffer to
mh-info-buffer.
2003-01-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-folder-size): If the user doesn't have a
Unseen-Sequence definition in .mh_profile then an error was
produced. This change fixes that.
* mh-seq.el (mh-thread-generate): Replace the *mh-thread* buffer
with a temporary buffer which is cleaned up when the function
exits.
* mh-e.el (mh-prompt-for-refile-folder): New function which
refactors out the intelligent folder guessing code from
mh-refile-msg.
(mh-refile-msg): Use mh-prompt-for-refile-folder.
* mh-seq.el (mh-thread-refile): Use mh-prompt-for-refile-folder to
do the same intelligent destination folder guessing as
mh-refile-msg (closes SF #664829).
* mh-utils.el (mh-folder-list, mh-make-folder-list-process)
(mh-folder-list-temp, mh-folder-list-partial-line)
(mh-set-folder-list): Removed.
(mh-sub-folders-cache, mh-sub-folders, mh-sub-folders-actual):
Moved over from mh-speed.el to implement hierarchical completion.
(mh-update-sub-folders-cache): Utility function called when
new folders are created or folders are removed.
(mh-folder-completion-function): New function is the folder name
completion function used in completing-read.
(mh-folder-completing-read): A thin wrapper function that is used
instead of completing-read directly. In the future we might want
to allow the user a customizable variable which will turn off
folders based completion.
(mh-prompt-for-folder): Use mh-folder-completing-read to read in
the folder name with hierachical completion (closes SF #664821).
* mh-speed.el (mh-speed-folders, mh-speed-folders-cache)
(mh-speed-folders-actual): Moved to mh-utils.el as mh-sub-folders,
mh-sub-folders-cache and mh-sub-folders-actual respectively.
(mh-speed-invalidate-map, mh-speed-invalidate-map)
(mh-speed-add-folder): Use the new names.
* mh-funcs.el (mh-kill-folder): Remove code that used to update
mh-folder-list which is no longer present. Instead
mh-update-sub-folders-cache is called.
* mh-index.el (mh-index-new-folder): Same as above.
2003-01-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-exec-cmd-daemon): An argument was added which
controls what is done with the process output.
* mh-funcs.el (mh-kill-folder): Use mh-previous-window-config to
restore window configuration. Also the call to mh-exec-cmd-daemon
only displays output if an error happened (closes SF #664828).
(mh-rmf-daemon): Check rmf output and display it only if
something went wrong.
(mh-print-msg): Pass in nil argument to mh-exec-cmd-daemon.
* mh-comp.el (mh-redistribute, mh-send-letter): Pass in nil
argument to mh-exec-cmd-daemon so that the functions will behave
as before.
* mh-pick.el (mh-search-folder): The current window config is
stored.
(mh-make-pick-template): Make the message headers read-only.
(mh-pick-mode-help-messages): Update help message.
(mh-do-pick-search): Fix problem when buffer isn't showing any
messages.
(mh-next-pick-field): Use buffer-substring-no-properties is
better.
(mh-pick-mode-map): Add key bindings (partially addresses
SF #664816)
* mh-index.el (mh-indexer-choices): Add a new field for each
index program choice. If it is non-nil then it is the name of a
function that given a lisp expression to search for generates a
pattern that is acceptable to the search program.
(mh-index-regexp-builder): New variable that stores the function
to be used to convert from the lisp expression syntax to
something that the search program understands.
(mh-index-generate-pretty-name): Generalized so that it can take
a list of strings as input.
(mh-index-search): Modified so that if the configured program has
a corresponding regexp-builder then a search buffer like pick
search is produced. Otherwise the previous behavior is maintained.
(mh-index-do-search): New interactive function that takes the
contents of the search buffer, generates an appropriate query and
produces the search results buffer by calling mh-index-search.
(mh-replace-string, mh-index-parse-search-regexp)
(mh-index-add-implicit-ops, mh-index-evaluate): New functions
which parses the infix search expression that the user enters. A
parse tree from which queries for different search programs can
be produced is produced.
(mh-swish++-regexp-builder, mh-swish++-print-regexp): Takes the
internal form of the query and produces input suitable for
swish++.
* mh-loaddefs.el: Regenerated.
2003-01-08 Bill Wohler <wohler@newt.com>
* Makefile (emacs-logs): New target for viewing CVS Emacs logs.
Useful to see if an Emacs developer has changed MH-E.
* MH-E-NEWS: Fixed case of MH-E in the "Changes" title.
* mh-utils.el (mh-temp-info-buffer): New variable to hold name of
buffer that contains version info.
* mh-e.el (mh-version): Use mh-temp-info-buffer instead of
mh-temp-buffer since version information was getting clobbered by
the aliasing code before it could be seen (closes SF #664467).
(mh-quit): Delete mh-temp-info-buffer.
* mh-comp.el (mh-insert-x-mailer): Use mh-temp-info-buffer to find
version info instead of mh-temp-buffer. You kind of need this
patch to send mail.
2003-01-07 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Set to 7.1+cvs.
2003-01-07 Bill Wohler <wohler@newt.com>
Released MH-E version 7.1.
* MH-E-NEWS, README: Updated for release 7.1.
* mh-e.el (Version, mh-version): Updated for release 7.1.
2003-01-07 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-auto-folder-collect-flag,
mh-alias-system-aliases, mh-alias-insert-file): Edited docstrings.
* Makefile (MH-E-IMG): Added alias.pbm and alias.xpm.
* mh-alias.el (mh-alias-insert-file, mh-alias-add-alias): Fixed
checkdoc warnings.
2003-01-07 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-search-from-end): New function that is used to
replace our usage of the CL function search.
(font-lock): The library is loaded to avoid compilation warning
in CVS Emacs.
* mh-speed.el (mh-speed-goto-folder, mh-speed-add-folder)
(mh-speed-extract-folder-name, mh-speed-invalidate-map): Use
mh-search-from-end instead of search.
* mh-seq.el (mh-thread-remove-parent-link): Use loop instead of
remove*.
(mh-thread-process-in-reply-to): Use mh-search-from-end instead
of search.
* mh-index.el (mh-md5-parser): Fix name of function.
(mh-index-update-single-msg, mh-index-update-maps): Avoid using
destructuring-bind since Emacs-20.7 can't handle this particular
usage.
(mh-namazu-next-result): Use mh-search-from-end instead of
search.
* mh-e.el (recursive-load-depth-limit): Add a defvar since CVS
emacs which doesn't have the variable defined causes a compiler
warning.
(mh-refile-a-msg): Rewritten to avoid using pushnew.
(mh-undo-msg): Use loop instead of remove-if.
* mh-comp.el (mh-show-buffer-message-number): Use
mh-search-from-end instead of search.
2003-01-01 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-visit-folder): Modified so that if RANGE is nil then
all messages are displayed. Documentation modified so that this is
explicitly stated.
(mh-visit-folder): Really fix it this time.
2003-01-01 Mark D Baushke <mdb@gnu.org>
* mh-alias.el (mh-alias-from-has-no-alias-p): Needs the
mh-autoload comment or mh-customize may have problems finding the
function.
* mh-loaddefs.el: Regenerated.
2002-12-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-namazu-execute-search): Fix bug in documentation.
2002-12-28 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-letter-mode): Mention mh-compose-insertion
variable in docstring, explain how to expand directives, and
don't mention mh-mhn-compose-insertion which isn't used directly
any more.
(mh-send-letter): Mention that X-Mailer and X-Face are inserted
automatically so that a user isn't tempted to do so himself in
mh-before-send-letter-hook.
(mh-insert-letter): Use "variable" prefix for mh-invisible-headers
now that we have both a function and a variable. Clarified
language a bit.
2002-12-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-xface-function): Only load x-face-e21 if
the emacs is not XEmacs.
* mh-index.el (mh-index-new-folder): The folder created should
always be added to mh-folder-list. Otherwise folder name
completion doesn't find the new folder created.
2002-12-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-clean-message-header-flag)
(mh-visible-headers, mh-invisible-headers)
(mh-invisible-header-fields-set): Reworded to satisfy checkdoc.
* mh-loaddefs.el: Regenerated.
* mh-e.el (mh-inc-folder, mh-visit-folder, mh-read-msg-range):
Handle nil value of mh-large-folder properly.
* mh-customize.el (mh-tool-bar-show-set, mh-tool-bar-letter-set)
(mh-tool-bar-folder-set, mh-tool-bar-folder-buttons)
(mh-invisible-headers, mh-invisible-header-fields-set): Checkdoc
fixes.
(mh-large-folder): Updated to allow for infinity. If
mh-large-folder is nil then all folders are deemed small.
2002-12-23 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-inc-folder, mh-visit-folder): Emit a message if
threading was suppressed because the number of messages exceed
mh-large-folder.
2002-12-23 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-invisible-headers): Deleted. Moved to
mh-customize.el
* mh-customize.el (mh-invisible-header-fields): New
defcustom. Simple user interface to change mh-invisible-headers.
(mh-invisible-header-fields-set): New function called when
mh-invisible-header-fields is set.
(mh-invisible-headers): New function. Does the actual work of
building the variable mh-invisible-headers from
mh-invisible-header-fields.
(mh-invisible-headers): defvar moved from mh-utils.el
2002-12-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-folder-size): Removed. Something very
similar appears as mh-folder-size.
(mh-speed-view): Simplified since the range selection logic has
been moved to mh-read-msg-range.
(mh-speed-parse-flists-output-line): Moved to mh-e.el as
mh-parse-flist-output-line.
* mh-funcs.el (mh-pack-folder): Use the new mh-read-msg-range.
* mh-e.el (mh-rescan-folder): Use the new mh-read-msg-range.
(mh-parse-flist-output-line): Moved from mh-speed.el where this
function was called mh-speed-parse-flists-output-line.
(mh-folder-size): Renamed from mh-speed-folder-size. The function
has been made more general and can be called from any buffer and
not just the speedbar buffer.
(mh-visit-folder): Use the new mh-read-msg-range (addresses SF
#655891).
(mh-read-msg-range): Rewritten.
2002-12-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-delete-subject-or-thread): New interactive
function that intelligently deletes messages based on threading,
if the folder is threaded, or on subject if folder isn't threaded.
* mh-utils.el (mh-show-delete-subject-or-thread): New interactive
function, callable from the show buffer, to intelligently delete
messages based on threading info or subject.
(mh-show-mode-map): Change binding of "k" to call
mh-show-delete-subject-or-thread.
* mh-e.el (mh-folder-mode-map): Change binding of "k" to call
mh-delete-subject-or-thread.
* mh-comp.el (mh-letter-mode-map): Add key binding for
mh-insert-identity.
* mh-loaddefs.el: Regenerated.
2002-12-21 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-tool-bar-letter-set): Bug fix. The
`tool-bar-add-item-from-menu' items were broken. I can't use my
constants there.
2002-12-21 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-insert-file): Bug fix. I never checked
that an AliasFile entry existed in .mh_profile.
2002-12-21 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-alias-insertion-location): New defustom.
Specifies where new aliases are entered in alias files.
* mh-alias.el (mh-alias-add-alias-to-file): Use it.
2002-12-21 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-add-alias-to-file): If ALIAS matches
exactly, prompt to [i]nsert before old value or [a]ppend after it.
(mh-alias-insert-file): Make sure we don't edit the passwd file.
Add optional argument for alias; If ALIAS is specified and it
already exists, try to return the file that contains it.
(mh-alias-which-file-has-alias): New function. Return the name of
writable file which defines ALIAS from list FILE-LIST.
(mh-alias-add-alias): Remove prompts for case of alias already
defined; done in mh-alias-add-alias-to-file.
2002-12-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-folders-actual): Fix bug in parsing of
folder names that have spaces in them. The original function would
truncate the folder name at the first space.
(mh-speed-flists): Add -sequence option to flists. This guards
against the user specifying something other than the unseen
sequence in his .mh_profile.
(mh-speed-parse-flists-output-line): New function that parses a
single line in the output of flists to find the folder name and
the counts of unseesn and total messages.
(mh-speed-parse-flists-output): Fix parsing bug which truncates
the folder names at the first space.
* mh-index.el (mh-index-generate-pretty-name): New function which
generates a nicer name for the search results. It trims white
space at the beginning and end and replaces white space with
underscores within the search regexp.
(mh-index-search): Use mh-index-generate-pretty-name.
* mh-loaddefs.el: Regenerated.
2002-12-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-new-folder): Add new folder to
mh-folder-list to enable name completion.
(mh-glimpse-execute-search, mh-swish-execute-search)
(mh-swish++-execute-search): Fix documentation.
* mh-seq.el (mh-thread-generate): Fixed a stupid bug where the wrong
folder could get 'scan'ed when generating the threaded view.
* mh-index.el (mh-index-search): If optional prefix arg is given
then the search in the current index buffer is redone.
(mh-glimpse-execute-search, mh-swish-execute-search)
(mh-namazu-execute-search): Documentation fixes.
* mh-e.el (mh-index-previous-search): New buffer local variable
stores parameters of search that created the buffer.
(mh-folder-mode): Make mh-index-previous-search buffer local.
(mh-visit-folder): Tweak the function so that only a single window
with the folder buffer is shown if mh-showing-mode is nil.
* mh-loaddefs.el: Regenerated.
2002-12-19 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-add-alias): Bug fix.
2002-12-19 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-add-alias): New interactive command. Add
ALIAS for ADDRESS in personal alias file.
(mh-alias-grab-from-field): New interactive command. Add ALIAS for
ADDRESS in personal alias file.
(mh-alias-add-address-under-point): New interactive
command. Insert an alias for email address under point.
(mh-alias-suggest-alias): New function. Suggest an alias for STRING.
(mh-alias-insert-file): New function. Return the alias file to
write a new entry in.
(mh-alias-address-to-alias): New function. Return the ADDRESS
alias if defined, or nil."
(mh-alias-from-has-no-alias-p): New function. Return t is From has
no current alias set. Used as tool-bar button enable function.
(mh-alias-add-alias-to-file): New function. Add ALIAS for ADDRESS
in alias FILE without alias check or prompts.
* alias.xpm, alias.pbm: New tool-bar icon for
mh-alias-grab-from-field.
* mh-e.el (mh-folder-line-matches-show-buffer-p): New function.
Return t if the message under point in folder-mode is in the show
buffer.
* mh-utils.el (mh-goto-address-find-address-at-point): New
function copied from goto-addr.el, which we don't want to
force-load on users. Find e-mail address around or before point.
(mh-address-mail-regexp): New defvar. A regular expression
probably matching an e-mail address.
* mh-customize.el (mh-alias-insert-file): New defcustom.
Filename to use to store new MH-E aliases.
(mh-tool-bar-folder-buttons): Enable mh-tool-bar-item-alias icon.
* mh-comp.el (mh-extract-from-header-value): New function.
Extract From: string from header.
2002-12-19 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-update-single-msg): New defvar controls
max number of command line args.
(mh-index-execute): New function which is to be used
instead of xargs so that we don't give the shell too many command
line args.
(mh-index-update-maps): Use mh-index-execute instead of xargs.
(mh-index-search): Remove unused code. Also the first message in
folder buffer is made current.
2002-12-18 Peter S Galbraith <psg@debian.org>
* mh-loaddefs.el: Regenerated.
* mh-comp.el (mh-letter-tool-bar-map): Moved to mh-customize.el
* mh-e.el (mh-folder-tool-bar-map): Moved to mh-customize.el
* mh-utils.el (mh-get-msg-num): autoloaded.
(mh-show-tool-bar-map): Moved to mh-customize.el
* mh-customize.el (mh-tool-bar-item-*): 33 new defconsts for
tool-bar setup and customization.
(mh-tool-bar-folder-buttons-set): New function to setup the
tool-bar after customization.
(mh-tool-bar-folder-buttons): New defcustom to specify which icons
appears in the tool-bar.
(mh-tool-bar-letter-buttons-set): New function to setup the
tool-bar after customization.
(mh-tool-bar-letter-buttons): New defcustom to specify which icons
appears in the tool-bar.
(mh-tool-bar-show-set): New function to setup mh-letter-tool-bar-map.
(mh-tool-bar-letter-set): New function to setup
mh-letter-tool-bar-map.
2002-12-18 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-folder-mode-map): Change entries for "\t", "\M-\t"
and backtab to call mh-index-next-folder and
mh-index-previous-folder as appropriate.
* mh-index.el (mh-index-next-folder, mh-index-previous-folder):
New interactive functions which jumps to search results of next
and previous folders respectively.
* mh-loadddefs.el: Regenerated.
* mh-index.el (mh-index-delete-folder-headers): Arrange for
mh-goto-cur-msg to just go to the current message.
* mh-e.el (mh-visit-folder): Since mh-scan-folder erases the whole
buffer anyway, we don't need to delete the folder headers. Also
index-data is non-nil only when the buffer folder doesn't exist.
So we need to call mh-make-folder.
(mh-folder-mode): Fix bug in that mh-index-checksum-origin-map was
not being made buffer local!
2002-12-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-visit-folder): Fix bug.
* mh-index.el (mh-md5sum-buffer): Buffer from which md5sum is run.
(mh-index-folder-first, mh-index-folder-last)
(mh-index-original-msg-list): Convenience macros aren't needed
anymore since the data structure has been changed.
(mh-index-update-single-msg): New function to update maps that
relate MD5 checksums to actual messages and vice-versa for a
single message.
(mh-index-update-maps): Do the above for all messages. If some
messages don't have MD5 checksums, they are annotated with the
result of md5sum.
(mh-index-search): Updated for the new version of mh-index-data.
(mh-msg-exists-p): New function to test a message exists.
(mh-index-insert-folder-headers): Updated for new mh-index-data.
(mh-index-delete-folder-headers): New function used to eliminate
original folder names from the buffer and make it look like a
plain folder buffer. This is used from mh-process-commands.
(mh-index-visit-folder): Use new version of mh-index-data.
(mh-index-match-checksum): New function which checks if the
X-MHE-Checksum header of a message matches.
(mh-index-execute-commands): New function that rmm's the original
messages. Then after mh-execute-commands executes it will seem
that the original messages were executed upon. This completes the
fix of SF #623321.
(mh-checksum-buffer): Renamed from mh-md5sum-buffer.
(mh-checksum-cmd, mh-checksum-parser): New globals to allow
different checksum programs to be used.
(mh-checksum-choose): New functions to find a checksum program.
(mh-openssl-parser, mh-md5sum-parser, mh-md5-parser): Functions to
parse the output of md5, md5sum and openssl.
(mh-index-update-maps): Use checksum parsing function.
(mh-index-search): Set checksum choice. Add a call to recenter,
otherwise the window point in the index buffer doesn't get set
properly.
* mh-funcs.el (mh-pack-folder, mh-sort-folder): Enable these
functions in folders created by index search.
* mh-e.el (mh-index-msg-checksum-map)
(mh-index-checksum-origin-map): New buffer local variables that
keep track of message checksums (used to implement
refiling/deletion for folders created by index folders).
(mh-last-msg): Make the function behave like mh-first-msg.
(mh-visit-folder): Add new optional argument which initializes
folders created by mh-index-search.
(mh-folder-mode): Make the variables mh-index-msg-checksum-map and
mh-index-checksum-origin-map buffer local.
(mh-process-commands): Call mh-index-execute-commands when called
from an index search buffer. This will reflect the changes being
made in the search folder to the original folders.
* mh-loaddefs.el: Regenerated.
2002-12-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-insert-folder-headers): Fix a bug which
caused the folder buffer to be marked as modified after rescanning
an index folder.
2002-12-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-visit-folder): The function should insert folder
names if it is visiting a folder created by index search.
* mh-index.el (mh-index-insert-folder-headers): The function now
maintains the old value of buffer-modified-p and temporarily makes
the buffer writable.
* mh-utils.el (mh-show-index-visit-folder): New interactive
function callable from show buffer that displays search results
from one folder.
(mh-show-mode-map): Key binding for "v".
* mh-speed.el: Fix credits.
(mh-index-folder-speedbar-buttons)
(mh-index-show-speedbar-buttons)
(mh-index-folder-speedbar-key-map)
(mh-index-show-speedbar-key-map)
(mh-index-folder-speedbar-menu-items)
(mh-index-show-speedbar-menu-items): Removed since the modes
mh-index-folder-mode and mh-index-show-mode no longer exist.
(mh-speed-extract-folder-name): Remove the bits about
mh-index-folder-mode and mh-index-show-mode.
* mh-seq.el (mh-copy-seq-to-eob): Updated to work properly with
index search results.
(mh-region-to-msg-list): Skip over non-scan lines.
(mh-thread-inc, mh-thread-add-spaces, mh-thread-folder): Skip
non-scan lines when populating mh-thread-scan-line-map.
(mh-thread-folder, mh-toggle-threads): Move the check for buffer
modification from mh-thread-folder to mh-toggle-threads.
(mh-toggle-threads): When returning to unthreaded view insert the
folder names if called from a index folder.
* mh-index.el: Fix credits and update commentary.
(font-lock-defaults, mh-index-buffer, mh-index-show-buffer)
(mh-index-ma-x-msg-index, mh-index-other-buffer)
(mh-index-matches, mh-index-previous-window-configuration)
(mh-index-current-msg, mh-index-folder-mode-keymap)
(mh-index-button-map, mh-index-folder-mode-help-messages): Remove
eliminated variables.
(mh-index-folder): New variable sets the MH folder under which the
index searches are stored.
(mh-index-folder-first, mh-index-folder-last)
(mh-index-original-msg-list): Convenience macros used to pull data
elements out of a list. If needed setf can be used to change them
as well.
(mh-index-search): Rewritten to create real folders where all the
normal folder operation. This partially fixes SF #623321 (refiles
and deletes doesn't work on original messages).
(mh-index-find-max-width, mh-index-search-again)
(mh-index-insert-scan, mh-index-callback, mh-index-search)
(mh-index-notate, mh-index-show, mh-index-header-display)
(mh-index-next, mh-index-folder-mode, mh-index-show-mode):
Functions, macros and modes removed.
(mh-folder-exists-p): New function to check if a folder exists.
(mh-index-new-folder): Generate a new folder name from a given
base string that mimics the way emacs generates buffer names.
(mh-index-insert-folder-headers): Insert folder names among the
search results.
(mh-index-visit-folder): New interactive function to show the
search results of one individual folder.
(mh-swish++-execute-search): Update documentation.
* mh-funcs.el (mh-pack-folder, mh-sort-folder): Disable these
functions if index search results are being viewed.
* mh-e.el (mh-folder-font-lock-keywords): Add highlight for
folder.
(mh-index-data): New buffer local variable that will be used to
store info about index search results.
(mh-rescan-folder): Implement rescanning for index search results.
(mh-folder-mode): Make mh-index-data buffer local.
(mh-remove-all-notation): Modified to take into account not all
lines in the folder buffer are normal scan lines.
(mh-folder-mode-map): Add key binding for "v" to jump to original
folder narrowed to search results.
* mh-customize.el (mh-index-folder-face): Make it bold so that it
will look like before.
* mh-loaddefs.el: Regenerated.
2002-12-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-map-to-seq-msgs): Modified so that it can be given
a list of messages in addition to a sequence.
(mh-region-to-sequence, mh-region-to-msg-list): The function
mh-region-to-msg-list replaces mh-region-to-sequence. The new
function avoids creating a dummy sequence in MH-E.
(mh-thread-delete, mh-thread-refile, mh-put-msg-in-seq): Modified
to use mh-region-to-msg-list.
* mh-funcs.el (mh-copy-msg): Modified to use mh-region-to-msg-list.
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo): Modified to use
mh-region-to-msg-list.
* mh-comp.el (mh-forward): Modified to use mh-region-to-msg-list.
The buffer-local variable mail-header-separator is no longer
bound. This fixes a bug where the default value of
mail-header-separator gets used if mh-forward is called in a fresh
emacs session.
(mh-annotate-msg): Update this so that it will handle message
lists too.
(mh-insert-letter): Make the test stronger. Since %d is being used
the argument better be an integer.
* mh-loaddefs.el: Regenerated.
2002-12-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-funcs.el (mh-copy-msg): Add support for transient-mark-mode.
If mark is active and transient-mark-mode is enabled then all the
messages in the region are copied.
* mh-seq.el (mh-list-sequences): Use mh-coalesce-msg-list to print
messages in sequence nicely. The prompt for the folder is removed
(the current folder is always used) and the output is made nicer
by not overflowing the screen width.
* mh-loaddefs.el: Regenerated.
2002-12-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-letter-complete): Checkdoc fix.
* mh-seq.el (mh-thread-current-indentation-level): New function
which returns the thread indentation level of current message.
(mh-thread-next-sibling, mh-thread-previous-sibling): New
interactive functions to jump to the next and previous siblings in
thread tree respectively.
(mh-thread-immediate-ancestor): New function to jump to ancestor
of current message in thread tree.
(mh-thread-ancestor): New interactive function to jump to
immediate ancestor or to root message of current thread depending
on optional argument.
* mh-utils.el (mh-show-thread-ancestor)
(mh-show-thread-next-sibling, mh-show-thread-previous-sibling):
Interactive functions callable from the show buffer.
(mh-show-thread-map): Bindings for Tu, Tp and Tn.
* mh-e.el (mh-thread-map): Bindings for Tu, Tp and Tn.
* mh-loaddefs.el: Regenerated.
2002-12-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-region-to-sequence): Change name of region
sequence created to 'mhe-region. This avoids any chance of
collision with actual MH sequences.
(mh-put-msg-in-seq, mh-thread-delete, mh-thread-refile): Change
name of region sequence used to 'mhe-region. Also delete the
'mhe-region sequence when done.
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo): Same as above.
* mh-comp.el (mh-forward): Same as above.
* mh-loaddefs.el: Regenerated.
2002-12-08 Bill Wohler <wohler@newt.com>
* mh-alias.el: Edited documentation. Broke up file into 2
sections: Alias Loading and Alias Expansion. Made terminology
consistent (replaced expand, substitute, and translate with
expand).
(mh-alias-reload): Brought message in line with coding conventions
and made more concise too.
(mh-alias-translate): Renamed to mh-alias-expand.
(mh-alias-substitute-aliases-flag): Renamed to
mh-alias-expand-aliases-flag.
(mh-alias-reload-local-users): Renamed to mh-alias-local-users.
Now just returns an alist of local users rather than have
side-effects.
(mh-alias-reload): Set timestamp at beginning of function to catch
edge case when alias added just after ali runs. Changed logic to
reflect return value of mh-alias-local-users.
* mh-customize.el (mh-alias-substitute-aliases-flag): Renamed to
mh-alias-expand-aliases-flag.
(mh-alias-local-users): Fixed documentation.
* mh-loaddefs.el: Regenerated
2002-12-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (require): Load Gnus at compile time so that the
constant gnus-version is defined when MH-E is being compiled.
(mh-macro-expansion-time-gnus-version, mh-run-time-gnus-version):
Use the constant gnus-version instead of the function gnus-version
to find out about gnus version information.
(gnus-version): Remove the autoload since it is not needed any
more.
2002-12-08 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-version): Moved compilation information in front of
Emacs information. The idea is that you start at MH-E and move
outwards. Show N/A if Gnus not compiled (be explicit). Matched
coding style with other output statements. (Aside: not that
efficiency matters here, but fewer calls to format have to be
faster, right? ;-). Matched output style of old output to new
statement--liked Satyaki's indentation better ;-).
2002-12-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (gnus-version): Autoload the function for use in
mh-version.
(mh-macro-expansion-time-gnus-version): New macro that finds the
Gnus version at macro expansion time.
(mh-run-time-gnus-version): New function to find the Gnus version
at run time.
(mh-version): Add information about Gnus versions available at
compile time and run time.
2002-12-07 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-ali): Add optional argument. if USER is
t, then assume ALIAS is an address and call ali with option -user.
* mh-alias.el (mh-alias-filenames): if ARG is t, appends list of
files from `mh-alias-system-aliases' to output list obtained from
mhparam output user list only.
(mh-alias-tstamp): Use it.
2002-12-05 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-inline-vcard-p): A new function which decides if
a vcard should be displayed inline.
(mh-mime-display-single): Use mh-inline-vcard-p to display
attached vcard as a signature if no other signature is present
(this partially addresses SF #649216).
2002-12-05 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-send-letter): Edits docs for mh-mml-to-mime
getting run if variable `mh-mml-compose-insert-flag' is set.
(mh-get-header-field): use buffer-substring-no-properties instead
of buffer-substring.
2002-12-04 Peter S Galbraith <psg@debian.org>
* mh-loaddefs.el: Regenerated.
* mh-customize.el (mh-customize): Add ;;;###mh-autoload tag.
2002-12-04 Peter S Galbraith <psg@debian.org>
* mh-loaddefs.el: Regenerated.
* mh-comp.el (mh-letter-complete): New command to do alias or word
completion in letter-mode.
(mh-letter-mode-map): Add \M-\t binding for mh-letter-complete.
* mh-alias.el (mh-alias-letter-mode-expand-alias-hook): Obsolete.
Replaced by mh-letter-complete command.
(mh-alias-reload-maybe): New function to rebuild alias table if
out of date.
(mh-alias-letter-expand-alias): No longer interactive. Use
mh-letter-complete instead.
2002-12-04 Peter S Galbraith <psg@debian.org>
* mh-customize.el (mh-letter-complete-function): New defcustom.
Function to call when completing outside of fields specified to
aliases.
* mh-alias.el (mh-alias-filenames):
s/mh-mhparam-component/mh-profile-component/
(mh-profile-component): Move to mh-utils.el and make interactive.
(mh-read-address): Make it autoloaded.
* mh-loaddefs.el: Regenerated.
* mh-comp.el (mh-read-address): Removed. Replaced by mh-alias
version.
* mh-utils.el (mh-profile-component): Moved from mh-alias.el.
2002-12-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-msg-is-in-seq): Formatting change.
* mh-index.el (mh-index-insert-scan): Remove unused variable.
2002-12-04 Bill Wohler <wohler@newt.com>
* mh-loaddefs.el: Regenerated.
* Makefile (MH-E-SRC): Moved mh-loaddefs.el into MH-E-LOADDEFS as
this was causing a cycle.
(MH-E-LOADDEFS): New variable to house mh-loaddefs.el.
(emacs): Reintroduced autoloads.
(autoloads): We're baaa-aack!
(dist, install-emacs): Use MH-E-LOADDEFS.
* mh-comp.el (mh-customize): Moved to mh-customize.el.
* mh-customize.el (mh-customize): Moved here from mh-comp. Makes
more sense, doesn't it?
* mh-alias.el, mh-comp.el, mh-e.el, mh-index.el, mh-mime.el,
mh-pick.el, mh-speed.el: Added mh-autoload cookie to all
interactive functions.
2002-12-04 Satyaki Das <satyaki@theforce.stanford.edu>
* Makefile (world): Remove target.
(mh-loaddefs.el): Add comment that only GNU Emacs can be used to
regenerate mh-loaddefs.el.
* mh-make.el: Removed.
2002-12-04 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (recursive-load-depth-limit): Only modify the limit
if it is an integer.
2002-12-04 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-header-field-beginning): New function. Move to
the beginning of the current header field.
2002-12-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-make.el (mh-files): Read in the MH-E filenames from the
environment variable where the Makefile puts it.
(mh-generate-autoloads, step2): Simplified since we now have the
complete file names.
* Makefile (world): Pass the MH-E files into the script, so that
the filenames don't need to be repeated in the script.
2002-12-04 Bill Wohler <wohler@newt.com>
* mh-loaddefs.el: New file. Check in automatically generated file
and include in package for the benefit of those who don't want to
or can't compile.
* Makefile (MH-E-SRC): Added mh-loaddefs.el now that it is checked
in and will be packaged.
(emacs): Removed autoloads. Adding mh-loaddefs.el to MH-E-SRC is
sufficient to build it.
(compile): Depend on MH-E-SRC instead of MH-E-OBJ and pass $? into
emacs so that Emacs is only invoked once to compile files. This
speeds things up by a factor of 3. It would be nice to only pass
those files that have been modified, but Emacs 21.4 will have
batch-byte-compile-if-not-done which we might be able to copy into
mh-make.el (or my proposed mh-e-dev.el which would be more
general-purpose).
(.SUFFIXES): Removed. Now that compile works directly on the
sources, the implicit rule is obsolete.
(autoloads): Deleted. See emacs change above.
2002-12-03 Bill Wohler <wohler@newt.com>
* Makefile (MH-E-SRC, emacs):
2002-12-03 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-make.el (mh-emacs): Make failing condition more strict.
(mh-loaddefs-end): Remove redundant statement.
* Makefile (world): A little typo. The bug didn't seem to make any
difference though.
* mh-make.el: New script that compiles MH-E.
(mh-loaddefs-beginning, mh-loaddefs-end): Don't save the autoloads
file in between. Only save at the end.
(mh-emacs-generate-autoloads, mh-xemacs-generate-autoloads)
(mh-generate-autoloads): Replace the separate functions in Emacs
and XEmacs with one that works in both variants. This simplifies
the script a lot.
(mh-generate-autoloads): doc fix.
* Makefile (world): New target which works for both GNU Emacs and
XEmacs.
2002-12-03 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-mhparam-component): Don't raise error if call to
mhparam fails.
* mh-alias.el (mh-alias-letter-expand-alias): Build alias table if
not already available.
2002-12-03 Bill Wohler <wohler@newt.com>
* mh-customize.el (mh-show-threads-flag): Alphabetized.
2002-12-03 Jeffrey C Honig <jch@honig.net>
* Makefile: Moved .PHONY rule after all rule for compatibility
with BSD/OS's old pmake.
2002-12-03 Mark D Baushke <mdb@gnu.org>
* mh-e.el (mh-get-new-mail): Simplify no-new-mail test.
(mh-add-cur-notation): Remove unnecessary function.
2002-12-03 Peter S Galbraith <psg@debian.org>
* mh-identity.el (mh-identity-make-menu): Check if
'mh-letter-mode-map' is bound, since this code also gets run when
mh-customize.el is loaded at startup.
2002-12-03 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-customize.el (mh-show-threads-flag): New customizable
variable which controls if new folders start of in threaded mode
(closes SF #646794).
* mh-e.el (mh-rescan-folder): Fix the function so that threading
is preserved across rescans.
(mh-visit-folder, mh-inc-folder): The folder is threaded if it was
already threaded or if mh-show-threads-flag is non-nil and the
number of scan lines is fewer than mh-large-folders (closes SF
#646794).
2002-12-02 Mark D Baushke <mdb@gnu.org>
* mh-e.el (mh-add-cur-notation): New function to mark the
current message with the mh-note-cur character.
(mh-get-new-mail): Use mh-add-cur-notation to undo the work of
mh-remove-cur-notation if there was no new mail (closes SF #647681).
* mh-e.el (mh-set-cmd-note): Do not update the default mh-cmd-note
value (closes SF #643701).
2002-12-02 Peter S Galbraith <psg@debian.org>
* mh-alias.el (mh-alias-reload): Renamed from mh-alias-learn-aliases.
(mh-alias-load-local-users): Renamed from mh-alias-learn-local-users.
(mh-alias-passwd-alist): New variable, holding aliases extracted
from the passwd file.
(mh-alias-tstamp): New variable storing the timestamp for alias
list generation.
(mh-read-address, mh-alias-reload, mh-alias-reload-local-users):
Complete rewrite.
(mh-alias-minibuffer-confirm-address): Use mh-alias-translate.
(mh-alias-translate): New function. Return translation for alias,
checking if in blind or passwd list.
(mh-alias-letter-expand-alias): Rewrite using
mail-abbrev-complete-alias from mailabbrev.el
(mh-alias-expand-alias-map): New variable.
(mh-alias-ali): New function. Return formatted string of
translated ALIAS from ali.
(mh-mhparam-component): New function. Return COMPONENT value from
mhparam, or nil if unset.
(mh-alias-filenames): New function. Provide list of alias
filenames from mhparam, or nil if none are set.
* mh-customize.el (mh-alias-display-blind-name-on-completion-flag):
Obsoleted.
(mh-alias-timestamp): Renamed to mh-alias-system-aliases.
2002-12-02 Bill Wohler <wohler@newt.com>
* Makefile (mh-loaddefs.el): Suppress creation of backup file.
2002-12-02 Mark D. Baushke <mdb@gnu.org>
* Makefile (mh-loaddefs.el): Simplify rule.
* Makefile (clean): Remove mh-loaddefs.el* for good measure.
($(MH-E-OBJ)): Depend on mh-loaddefs.el to compile these.
(autoloads, mh-loaddefs.el): Revamp rules.
(mh-loaddefs.el-tail, autoloads-gen): Remove rules.
* mh-e.el (recursive-load-depth-limit): Do not try to
bump the value unless the variable exists.
* mh-e.el (recursive-load-depth-limit): Bump value of
recursive-load-depth-limit to 50 to allow emacs 21.1 which
normally has a default value of 10 to be able to compile MH-E.
2002-12-02 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-funcs.el (mh-pack-folder, mh-sort-folder): Fix the functions
so that threading is preserved (needed for SF #646794).
* mh-identity.el (mh-identity-signature-start)
(mh-identity-signature-end): Checkdoc fixes.
* mh-e.el (mh-previous-unread-msg, mh-next-unread-msg): Checkdoc
fixes.
2002-12-01 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-identity.el (compile): Make mh-identity.el compile without
warnings.
* mh-e.el (mh-previous-unread-msg, mh-next-unread-msg): New
interactive functions that go to next and previous unread
messages (closes SF #630328).
(mh-folder-mode-map): Add key bindings for M-n and M-p to
mh-folder-mode-map.
* mh-utils.el (mh-show-next-unread-msg)
(mh-show-previous-unread-msg): New interactive functions that go
to the next and previous unread messages respectively. These are
callable from the show buffer.
(mh-show-mode-map): Add key bindings for M-n and M-p to
mh-show-mode-map.
2002-12-01 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-defun-compat): Make it indent like a defun.
* mh-index.el (mh-defun-index): Make it indent like a defun.
* mh-customize.el: New file (closes SF #643722).
* Makefile (MH-E-SRC): Added mh-customize.el (closes SF #643722).
* mh-speed.el, mh-pick.el, mh-mime.el, mh-index.el, mh-e.el,
mh-comp.el: Moved all defgroups, defcustoms, and deffaces to
mh-customize.el (closes SF #643722).
* mh-utils.el (mh-xemacs-flag): Moved here from below since
needed by mh-customize.el.
(mh-customize): Required. mh-invisible-headers)
(mh-bury-show-buffer-flag, mhl-formfile):
Moved all defgroups, defcustoms, and deffaces to mh-customize.el
(closes SF #643722) .
* mh-identity.el (mh-comp-loaded): New variable in a desparate
attempt to prevent an infinite loop.
(eval-when-compile): Was able to remove these defvars as they are
now predefined in mh-loaddefs and mh-customize.
(mh-identity-list-set): Added ;;;###mh-autoload cookie.
Moved all defgroups, defcustoms, and deffaces to mh-customize.el
(closes SF #643722).
* mh-alias.el (mh-e): Require this, as it needs defcustoms, which
is in mh-customize which is required by mh-utils which is required
by mh-e.
Moved all defgroups, defcustoms, and deffaces to mh-customize.el
(closes SF #643722).
2002-11-30 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-thread-map): Add key bindings "Td" and "To" (closes
SF #630493).
(mh-help-messages): Update help message for prefix map.
(mh-help-messages): Doc fix.
(mh-help-messages): Really fix it.
* mh-utils.el (mh-show-thread-delete, mh-show-thread-refile): New
interactive functions corresponding to mh-thread-delete and
mh-thread-refile callable from the show buffer.
(mh-show-thread-map): Add key bindings for "Td" "To".
* mh-seq.el (mh-narrow-to-seq, mh-put-msg-in-seq, mh-rename-seq)
(mh-narrow-to-subject, mh-delete-subject, mh-toggle-threads): Add
mh-autoload cookies.
(mh-thread-find-children): New function which finds the region
containing all children of a message.
(mh-thread-delete): New interactive function that marks for
deletion the current message and its children.
(mh-thread-refile): New interactive function that marks for
refiling the current message and its children.
2002-11-30 Bill Wohler <wohler@newt.com>
* mh-funcs.el, mh-identity.el, mh-index.el, mh-pick.el, mh-seq.el:
Removed MH-E autoloads. These are now provided by mh-loaddefs.el.
Added ;;;###mh-autoload tag to selected functions so that
autoloads for those functions can be automatically created in
mh-loaddefs.el (closes half of SF #643722).
* mh-mime.el (mh-buffer-data): Moved to mh-utils where it is used.
Added ;;;###mh-autoload tag to selected functions so that
autoloads for those functions can be automatically created in
mh-loaddefs.el (closes half of SF #643722)..
* mh-utils.el (mh-loaddefs): Added require.
(mh-buffer-data): Moved here from mh-mime.el as it is used in
mh-display-msg.
(mh-set-cmd-note): Moved to mh-e.el.
Removed MH-E autoloads. These are now provided by mh-loaddefs.el.
Added ;;;###mh-autoload tag to selected functions so that
autoloads for those functions can be automatically created in
mh-loaddefs.el (closes half of SF #643722)..
* mh-e.el (mh-set-cmd-note): Moved here from mh-utils.el since it
uses mh-scan-format-file which is defined here.
Removed MH-E autoloads. These are now provided by mh-loaddefs.el.
Added ;;;###mh-autoload tag to selected functions so that
autoloads for those functions can be automatically created in
mh-loaddefs.el (closes half of SF #643722)..
* mh-comp.el, mh-speed.el (mh-utils): Removed require. mh-utils is
provided via mh-e.el.
Removed MH-E autoloads. These are now provided by mh-loaddefs.el.
Added ;;;###mh-autoload tag to selected functions so that
autoloads for those functions can be automatically created in
mh-loaddefs.el (closes half of SF #643722)..
* Makefile (emacs): Add dependency on autoloads.
(clean): Remove mh-loaddefs.el too.
(autoloads): New target. Builds mh-loaddefs.el.
(mh-loaddefs.el): New target. Initializes mh-loaddefs.el.
(mh-loaddefs.el-tail): New target. Appends to mh-loaddefs.el.
(autoloads-gen): Runs batch-update-autoloads to populate
mh-loaddefs.el (closes half of SF #643722)..
(auto-autoloads.elc): Renamed from autoloads to be explicit about
file that's created.
(custom-load.elc): Ditto.
2002-11-30 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-last-ancestor): New variable which keeps
track of oldest ancestor of last message. If due to narrowing the
common ancestor of two messages is lost then one of them is
promoted to be the parent of the other. This variable helps in
this process.
(mh-thread-generate-scan-lines): Group messages which belong to
the same thread tree, even if a common ancestor is no longer
present.
(mh-thread-folder, mh-copy-seq-to-eob, mh-thread-inc): Bind
mh-thread-last-ancestor to nil when calling
mh-thread-generate-scan-lines.
* mh-mime.el (font-lock): Font-lock required at compile time to
avoid warning about font-lock-maximum-size
(mh-display-smileys, mh-display-emphasis): Show graphical smileys
and emphasis only if message isn't too large.
* mh-e.el (mh-visit-folder): Revisiting a buried folder which has
been threaded or narrowed confuses MH-E. Even though the folder is
displayed as not threaded and not narrowed, MH-E still believes
the folder is in the previous state. This can cause problems when
trying to narrow/thread the folder. The change fixes this.
* mh-mime.el (mh-mime-display-alternative): The setting of
mh-display-buttons-for-inline-parts-flag was not being used when
displaying one of the alternatives. This change fixes that.
* mh-comp.el (mh-show-buffer-message-number): Replace subseq with
substring.
(mh-filter-out-non-text): When filtering out MIME buttons from
yanked text, the last line of the MIME part was getting lost. The
fix avoids that and removes only the last new line instead.
2002-11-29 Peter S Galbraith <psg@debian.org>
* Makefile (MH-E-SRC): Add mh-alias.
* mh-alias.el: Assign copyright to FSF instead of myself.
(mh-read-address): Add support for emacs-21's
completing-read-multiple to prompt for multiple entries.
(mh-alias-PC-complete-address): Deleted.
(mh-alias-learn-aliases): Use mh-exec-cmd-quiet instead of old kludge.
(mh-alias-letter-mode-expand-alias-hook): Simplify.
(mh-alias-hostname): Deleted.
(mh-alias-substitute-aliases-flag): Change default to nil.
(mh-alias-display-blind-name-on-completion-flag) Change default to
nil.
(mh-alias-alist): Now holds alias values.
(mh-alias-lowercase-alist): Deleted.
(mh-alias-minibuffer-confirm-address, mh-alias-learn-aliases)
(mh-alias-learn-local-users, mh-alias-letter-expand-alias): Use
new mh-alias-alist instead of old mh-alias-lowercase-alist.
* mh-alias.el: Moved from contrib/ directory. Now part of MH-E!
* Makefile (MH-E-SRC): Add mh-identity.
* mh-identity.el (mh-compose-and-send-mail, mh-insert-identity)
(mh-identity-make-menu, mh-identity-default, mh-identity-menu):
Moved to mh-comp.el.
* mh-comp.el (mh-compose-and-send-mail): Add mh-identity support.
(mh-insert-identity, mh-identity-make-menu, mh-identity-default)
(mh-identity-menu): Added from mh-identity.el
2002-11-29 Bill Wohler <wohler@newt.com>
* mh-comp.el, mh-e.el, mh-funcs.el, mh-identity.el, mh-index.el,
mh-mime.el, mh-pick.el, mh-seq.el, mh-speed.el, mh-utils.el:
Ran indent-region, reformatted long lines, ran untabify.
(indent-tabs-mode): Set file local variable to nil.
2002-11-29 Bill Wohler <wohler@newt.com>
Released MH-E version 7.0.
* mh-e.el (Version, mh-version): Updated for release 7.0.
* mh-comp.el (subseq, search): Require cl instead of autoloading
these due to compilation warnings in CVS Emacs.
2002-11-23 Bill Wohler <wohler@newt.com>
* MH-E-NEWS: Emphasize the renaming of the variables at the top of
the notes.
2002-11-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-mode-map): Remove binding for RET since it
is not needed and the binding is more useful to toggle display of
MIME parts.
* mh-mime.el (mh-mime-button-commands): Remove bindings for "i"
and "o" from MIME buttons.
(mh-insert-mime-button): Change comment to reflect change in
button key map.
2002-11-21 Bill Wohler <wohler@newt.com>
Released MH-E version 6.1.91.
* mh-e.el (Version, mh-version): Updated for release 6.1.91.
* MH-E-NEWS: Inline HTML parts supported with Gnus 5.10, not 5.9.
2002-11-21 Mark D. Baushke <mdb@gnu.org>
* mh-comp.el (mh-letter-insert-signature-hook): This should be in
customize-group mh-compose.
2002-11-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (load): Load mm-view.el here so that
mm-inline-text-html would be defined if available.
(mh-mm-inline-media-tests): If mm-inline-text-html is available
then use it, otherwise fall back on using mm-inline-text (closes
SF #641482).
* mh-mime.el (load): Remove the load of mm-view here since it
happens in mh-utils.el now.
2002-11-15 Bill Wohler <wohler@newt.com>
Released MH-E version 6.1.90.
* README (Compile): New section. Users must now compile MH-E due
to the vagaries of the various versions of gnus.
* Makefile (MH-E-IMG): Added reply-all.pbm, reply-all.xpm,
reply-from.pbm, reply-from.xpm, reply-to.pbm, reply-to.xpm.
(MH-E-ETC-ETC): Added Makefile and README.
(dist): Depend on all, so clean happens. Don't add .elc files to
tarball as they are built upon installation now.
2002-11-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-process-commands): Fix a bug in mh-execute-commands.
If called in threaded mode, cur was always getting set to the last
message in the folder.
2002-11-14 Bill Wohler <wohler@newt.com>
* mh-e.el (Version, mh-version): Updated for release 6.1.90.
* MH-E-NEWS, README: Updated for release 7.0.
* mh-utils.el (mh-index-search): Added full docstring which new
users will need before they run a search!
(mh-swish++-execute-search, mh-swish-execute-search,
mh-namazu-execute-search mh-glimpse-execute-search): Added
autoloads with full docstrings for the same reason!
* mh-e.el (mh-limit-map): Removed / / alias for
mh-narrow-to-subject.
* mh-utils.el (mh-show-thread-map): Removed / / alias for
mh-show-narrow-to-subject.
* mh-seq.el (mh-delete-subject): Checkdoc fix.
* mh-e.el (mh-help-messages): Added / prefix character to help
string. Tweaked / helpstring a little.
2002-11-14 Mark D. Baushke <mdb@gnu.org>
* mh-utils.el (mh-set-cmd-note): Fix nitpick by adding one to the
width for cosmetic reasons.
2002-11-14 Peter S Galbraith <psg@debian.org>
* mh-identity.el (mh-insert-identity): Fix a few things undone by
Jeff's patch.
(mml-insert-tag): Add autoload.
2002-11-13 Mark D. Baushke <mdb@gnu.org>
* mh-identity.el (mh-insert-identity): A value of either nil or
"" should cause the field to be removed.
(mh-identity-list): Update the docstring.
2002-11-13 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-limit-map): New key map for limits (subject for now).
* mh-utils.el (mh-show-limit-map): Same.
* mh-seq.el (mh-delete-subject): Renamed from
mh-delete-subject-sequence.
(mh-narrow-to-subject): Renamed from mh-narrow-to-subject-sequence.
(mh-next-unseen-subject-sequence): Removed. :-(
* mh-e.el: Use 'em
* mh-seq.el: Use 'em.
2002-11-13 Mark D. Baushke <mdb@gnu.org>
* mh-e.el (mh-alt-show): New defalias for mh-show.
(mh-alt-refile-msg): New defalias for mh-refile-msg.
(mh-alt-send): New defalias for mh-send.
(mh-folder-mode-map): Use mh-alt-show, mh-alt-refile-msg and
mh-alt-send for the alias bindings.
(mh-alt-visit-folder): New defalias for mh-visit-folder.
(mh-folder-map): Use it.
(mh-folder-message-menu): Revert previous change.
2002-11-13 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-message-menu): Make key binding "o" appear in
menu for mh-refile-msg.
2002-11-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate-scan-lines): In threaded view,
scan lines of duplicate messages were too long. The change fixes
that.
2002-11-13 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-adaptive-cmd-note-flag): Improved grammar in
docstring.
* mh-speed.el (mh-speed-run-flists-flag): While documenting this
variable in the release notes, I was unsure what would happen if
set to nil. So, I clarified the docstring and indicated
implications of setting this variable to nil, and offered manual
workaround.
2002-11-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-quit): Fix documentation and run
mh-before-quit-hook and mh-quit-hook.
2002-11-13 Bill Wohler <wohler@newt.com>
* mh-utils.el (with-mh-folder-updating): Renamed local variable
mh-save-modification-flag to save-modification-flag.
2002-11-12 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-index-keymap): Renamed to
mh-index-folder-mode-keymap to be a closer to the usual keymap
naming convention. Since we want our own keymap and not inherit
the one in mh-folder-mode, we need to use a suffix other than
-map.
* mh-e.el (mh-folder-sequence-menu): s/Msg/Message.
s/Seq/Sequence.
(mh-folder-message-menu): s/Msg/Message. Removed redundant refile
item.
(mh-folder-folder-menu): Aligned symbols.
* mh-index.el (mh-index-folder-message-menu): s/Msg/Message.
* mh-utils.el (mh-show-sequence-menu): s/Msg/Message.
s/Seq/Sequence.
(mh-show-message-menu): s/Msg/Message. Removed redundant refile
item.
(mh-show-folder-menu): Aligned symbols.
2002-11-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-matches, mh-index-current-match): Remove
these variables since they were only used for glimpse and grep.
Now the functionality of all the indexing programs will be
uniform.
(mh-index-search, mh-index-insert-scan, mh-defun-index)
(mh-index-show): Simplify functions since matches are no longer
shown.
(mh-index-parse-match): Remove function.
* mh-e.el (mh-scan-cmd-note-width, mh-scan-destination-width)
(mh-scan-date-width, mh-scan-date-flag-width)
(mh-scan-from-mbox-width, mh-scan-from-mbox-sep-width): New
variables to keep track of the widths of the different fields in
the scan lines.
(mh-scan-field-from-start-offset, mh-scan-field-from-end-offset)
(mh-scan-field-subject-start-offset): Offsets that are computed
from the scan line widths.
* mh-seq.el (mh-copy-seq-to-eob, mh-thread-inc)
(mh-thread-parse-scan-line): Use new variables that remember the
various offsets in place of integer constants.
(mh-thread-generate-scan-lines): Space shouldn't be added here!
2002-11-12 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-scan-format-mh, mh-scan-format-nmh): Noted that the
first column is column number 0 and changed "sixth column" to
"fifth column" accordingly.
* mh-index.el (mh-index-folder-mode): Clarified method of replying
in mode documentation.
(mh-index-folder-tool-bar-map): s/mh-e/MH-E/.
* mh-e.el (mh-generate-new-cmd-note): Try not to mention internal
variable mh-cmd-note in docstrings.
* mh-utils.el (mh-adaptive-cmd-note-flag): Set default value to t.
Reworded docstring so it doesn't mention internal variable
mh-cmd-note. Added information about using fixed-width message
numbers.
(mh-cmd-note): Mention mh-set-cmd-note in docstring. Also suggest
that it is updated dynamically only if mh-scan-format-file is t.
(mh-set-cmd-note): Grammer fix in docstring.
(mh-cmd-note): Noted that the first column is column number 0.
* mh-e.el (mh-scan-format-file): Added information about
mh-set-cmd-note and mh-adaptive-cmd-note-flag to docstring.
* mh-index.el (mh-index-keymap): Added bindings for i
(mh-inc-folder), m (mh-send alias), and s (mh-send) since these
appear to be supported and are found in the toolbar.
(mh-index-folder-key-map): Ditto for f (mh-visit-folder alias), o
(mh-visit-folder) alias, and v (mh-visit-folder).
(mh-index-folder-mode-help-messages): Changes for above.
(mh-index-folder-message-menu, mh-index-folder-folder-menu): New
menus. I decided to delete the unavailable items since greying out
implies that the user can do something to access them. In this
case, that's not the case. Well, that's not entirely true--the
user could write code for those functions ;-).
(mh-index-folder-mode): Use new menus.
* mh-utils.el (mh-prompt-for-folder): Added optional argument
default-string which can be used in case the string for default
isn't intuitive enough.
* mh-index.el (mh-index-search): Made default prompt more
intuitive (I hope!).
2002-11-11 Peter S Galbraith <psg@debian.org>
* mh-identity.el (mh-header-field-delete): Remove save-excursion.
Strange that this worked for me before... Thanks to Jeff for the
patch.
(mh-insert-identity): Numerous tweaks and fixes from Jeff who also
adds a nicer-looking MIME header for signatures inserted after
MIME insertions.
2002-11-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-parse-scan-line): Generalize this function
so that it can take a string containing the scan-line as argument
in addition to using the line at point.
(mh-thread-add-spaces): New function to pad each scan line to the
appropriate length. This is called when mh-cmd-note is increased.
* mh-e.el (mh-generate-new-cmd-note): Make this work on a threaded
folder by using mh-thread-add-spaces to pad the pre-existing lines
in mh-thread-scan-line-map appropriately.
(mh-thread-add-spaces): Autoload from mh-seq.
2002-11-11 Mark D. Baushke <mdb@gnu.org>
* mh-index.el: Fix checkdoc nit.
* mh-mime.el (mh-display-buttons-for-inline-parts-flag): Renamed
from mh-display-buttons-for-inline-parts.
(mh-mime-display-single): Use it.
This addresses part of SF #627015.
* mh-e.el (mh-print-background-flag): Renamed from
mh-print-background.
* mh-funcs.el (mh-print-msg): Use it.
This addresses part of SF #627015.
* mh-comp.el (mh-delete-yanked-msg-window-flag): Renamed from
mh-delete-yanked-msg-window.
(mh-yank-from-start-of-msg, mh-yank-cur-msg): Use it.
This addresses part of SF #627015.
* mh-utils.el (mh-update-sequences-after-mh-show-flag): Renamed
from mh-update-sequences-after-mh-show.
(mh-show-msg): Use it.
This addresses part of SF #627015.
* mh-utils.el (mh-decode-quoted-printable-flag): Renamed from
mh-decode-quoted-printable
(mh-display-msg, mh-decode-quoted-printable-have-mimedecode):
Use it.
This addresses part of SF #627015.
* mh-utils.el (mh-recursive-folders-flag): Renamed from
mh-recursive-folders.
(mh-make-folder-list-background): Use it.
* mh-funcs.el (mh-list-folders): Ditto.
This addresses part of SF #627015.
* mh-utils.el (mh-auto-folder-collect-flag): Renamed from
mh-auto-folder-collect.
(mh-find-path): Use it.
This addresses part of SF #627015.
* mh-utils.el (mh-decode-mime-flag): Renamed from
mh-decode-mime.
* mh-utils.el (mh-show-mode, mh-show-xface)
(mh-decode-quoted-printable, mh-display-msg, mh-display-msg): Use it.
* mh-mime.el (mh-graphical-smileys-flag)
(mh-graphical-emphasis-flag): Ditto.
* mh-index.el (mh-index-search, mh-index-show): Ditto.
* mh-e.el (mh-header-display): Ditto.
This addresses part of SF #627015.
* mh-e.el (mh-make-folder-mode-line): Use save-window-excursion
to get back to the current message.
2002-11-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-keymap, mh-index-page-msg)
(mh-index-folder-tool-bar-map): Replace mh-index-scroll-up with
mh-index-page-msg.
(mh-index-keymap, mh-index-previous-page): Replace
mh-index-scroll-down with mh-index-previous-page.
2002-11-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (autoload/require): Load mh-mime when mh-index.el is
loaded. This fixes the infinite load loop. I am not sure what the
actual problem is. Also removed the nop requires/autoloads.
(mh-defun-index): Use the right argument for mh-recenter.
Otherwise it misbehaves for the default value of
mh-summary-height.
* mh-e.el (mh-goto-next-button): Fix infinite loop when S-Tab was
used on first line of index folder buffer.
2002-11-09 Peter S Galbraith <psg@debian.org>
* mh-index.el (mh-index-folder-tool-bar-map): Tool-bar for
mh-index-mode.
(mh-index-folder-mode): Use it.
(mh-index-keymap): Added mouse-2 binding, like in regular
folder-mode.
2002-11-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-folder-mode): Fix doc string for major
mode. It was pointing to the wrong keymap.
(mh-index-show-mode): Fix doc string for mode. Also add mh-help
support.
* mh-comp.el (mh-forward, mh-yank-cur-msg): Use new macro
mh-mark-active-p instead. This does the right thing for different
variants of Emacs.
(mh-yank-cur-msg): Add a space between sexprs.
* mh-utils.el (mh-mark-active-p): New macro which papers over
diffences between GNU Emacs and XEmacs. The variables mark-active
and transient-mark-mode are used in GNU Emacs while zmacs-regions
and region-active-p are used in XEmacs.
* mh-seq.el (mh-put-msg-in-seq, mh-thread-ancestor-p): Use
mh-mark-active-p as above.
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo): Use
mh-mark-active-p as above.
2002-11-06 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-yank-cur-msg): Fix for XEmacs. It didn't work
with a selected region, and left the inserted text selected (in
reverse video). I didn't use SF patch #402315 to implement this.
2002-11-05 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-show-tool-bar-map): Change call to
mh-tool-bar-search-command such that user can customize it for the
current session.
* mh-e.el (mh-folder-tool-bar-map): Same.
2002-11-05 Bill Wohler <wohler@newt.com>
* mh-utils.el, mh-e.el (mh-tool-bar-search-function): Renamed from
mh-tool-bar-search-command.
* mh-index.el (mh-index-search): Backed out previous change to
prompt. There ain't no folder named "all."
* mh-utils.el (mh-tool-bar-search-command): Added mh-search-folder
and mh-index-search to the docstring so that user can easily click
on them for more information.
* mh-pick.el (mh-search-folder): Mention that this function uses
the MH pick command to give the user more information when
choosing between mh-search-folder and mh-index-folder.
* mh-index.el (mh-index-search): Edited the docstring. Direct the
user to mh-index-program if necessary.
(mh-index-program): Edited this docstring too. Viewing the help
in a *Help* buffer really exposes grammatical flaws.
2002-11-05 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-tool-bar-search-command): New defcustom to set
what search function to use in tool-bar.
(mh-show-tool-bar-map): Use it.
* mh-e.el (mh-folder-tool-bar-map): Use it.
2002-11-05 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-index-search): Changed default prompt from "+"
to "all". mh-prompt-for-folder doesn't seem to mind.
* mh-e.el (mh-folder-folder-menu): Added menu entry for
mh-index-search.
* mh-utils.el (mh-show-folder-menu): Added menu entry for
mh-index-search.
* mh-index.el: Added commentary on supported search engines and
for getting started (initializing database).
2002-11-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-keymap, mh-index-folder-key-map): Move key
binding of "i" to "Fi".
(mh-index-folder-mode-help-messages): Change help message to
reflect above change.
2002-11-04 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-index-program, mh-indexer): Swapped names since
the former seems like a better user variable name. If you've
customized mh-indexer, be sure to toss it out and customize
mh-index-program.
2002-11-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-indexer-choices): Not having the quotes in the
binary names is a bit nicer since that maintains uniformity with
the other names.
(mh-index-choose): Use symbol-value instead of eval. Eval should
be avoided except when it can't be :-).
2002-11-04 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-index-program): New variable to hold the name of
the indexer that was found; use this instead of clobbering
user-customizable variable mh-indexer.
(mh-index-search): Use it. Added comments to keep others from
doing what I had done (fortunately, I caught myself before
checking it in ;-).
(mh-index-choose): Set mh-index-program instead of mh-indexer.
Update docstring to describe side-effects.
* mh-index.el (mh-indexer): Added swish++ to docstring. Chances
are good that if someone has both swish++ and swish, they want to
use the much faster, much smaller swish, so move it up in the
list.
(mh-indexer-choices): Ditto for rationale for moving swish++ up in
priority over swish. Also, use -binary symbols instead of
hard-coding binary names. This allows package installers to
customize the location of the binaries in site-lisp and still have
the auto-detection code work. It also allows one to have alternate
binary names (see mh-swish++-binary).
(mh-index-search): Ditto (moving swish++ up).
(mh-swish++-binary): Look for search++, then search. The rationale
is that a package maintainer may rename search to search++ if
search is already in use (e.g., Debian) so try it first.
(mh-swish++-execute-search): Replaced Satyaki's path with dummy
path in docstring. Also removed RecurseSubdirs since this is the
default. Added comment that index might be named index++ on some
systems (e.g., Debian).
(mh-index-choose): Updated to work with new mh-indexer-choices.
2002-11-04 Peter S Galbraith <psg@debian.org>
* mh-identity.el (mh-identity-list-set): Don't call easy-menu-add
here, since that adds the menu to the Customize buffer in XEmacs.
2002-11-04 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-mhn-compose-insert-flag)
(mh-mml-compose-insert-flag): Removed eval-when-compile defvar.
* mh-mime.el (mh-mhn-compose-insert-flag)
(mh-mml-compose-insert-flag): Move variables to mh-utils.el.
Fixes mh-letter-menu for XEmacs.
2002-11-04 Eric Ding <eding@rational.com>
* mh-comp.el (mh-rejected-letter-start): add another string
2002-11-04 Eric Ding <ericding@alum.mit.edu>
* mh-comp.el (mh-rejected-letter-start): regexp-opt doesn't take
regexps as args, only regular strings
2002-11-04 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-mail-followup-to): Don't modify a
pre-existing M-F-T field. If a nmh replgroupcomps propagates a
M-F-T field in a message reply, then we have to have it alone.
2002-11-02 Bill Wohler <wohler@newt.com>
* mh-comp.el, mh-e.el, mh-funcs.el, mh-identity.el, mh-index.el,
mh-mime.el, mh-pick.el, mh-seq.el, mh-speed.el, mh-utils.el,
mh-xemacs-compat.el: Added Local Variables section. Defined
sentence-end-double-space to be nil so that those who might not
buy my setting of this variable can at least run checkdoc without
a whole lot of noise.
2002-11-02 Peter S Galbraith <psg@debian.org>
* mh-identity.el: New file. Multiple Identify support for MH-E.
Used to easily set different fields such as From and Organization,
as well as diffrent signature files. This file won't be included
with V7.0.
2002-11-02 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-mm-save-part): New function to wrap mm-save-part
from Gnus 5.10 to make it explicit which code has been
commandeered.
(mh-mime-save-part): Call mh-mm-save-part instead of cut-n-pasted
code from Gnus 5.10.
2002-11-02 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-yank-from-start-of-msg): Edit docstring to
mention related variables mh-reply-show-message-flag and
mh-delete-yanked-msg-window.
(mh-reply): Change the "Reply to whom" prompt.
2002-11-01 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-show-hook): Moved to mh-utils.el where it is used.
(mh-folder-list-change-hook): Converted this from defvar in other
files to defcustom here. It is called, not documented as
obsolete, and might as well be documented.
(mh-inc-folder, mh-quit, mh-delete-a-msg, mh-refile-a-msg,
mh-process-commands, mh-update-unseen): Added missing
documentation about hook, or made verbiage about hook consistent
throughout, even if the function isn't interactive.
* mh-utils.el (mh-folder-list-change-hook): Moved defvar to mh-e
and made it a defcustom.
(mh-show-mode-hook): Put it back in (actually, it was in mh-e.el,
but this is the place where it is called).
(mh-show-hook): Moved here from mh-e.el since it's called here.
(mh-show-mode): Call mh-show-mode-hook.
(mh-show-mode, mh-show-msg, mh-find-path, mh-prompt-for-folder,
mh-prompt-for-folder, mh-set-folder-list): Added missing
documentation about hook, or made verbiage about hook consistent
throughout, even if the function isn't interactive.
* mh-comp.el (mh-send-letter): Made verbiage about hook consistent
throughout.
(mh-insert-prefix-string): Made docstring more descriptive of what
is going on.
* mh-funcs.el (mh-kill-folder): Added missing documentation about
hook.
* mh-index.el (mh-index-show-hook): Moved defvar to defcustom.
(mh-index-show): Made verbiage about hook consistent throughout.
* mh-mime.el (mh-edit-mhn-hook): Moved defvar to defcustom.
(mh-edit-mhn): Added missing documentation about hook.
* mh-pick.el (mh-pick-mode): Made verbiage about hook consistent
throughout. Call the damn hook.
2002-11-01 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-insert-mail-followup-to-list): Fix typo so that
it will look right in info.
* mh-index.el (mh-index-search): Change argument name from
new-buffer-p to new-buffer-flag.
(mh-index-search-again, mh-index-search): New index-buffers were
being named *mh-index*<2>, *m-index*<2><2> and so on. This problem
is fixed.
(mh-index-scroll-up, mh-index-scroll-down): Scrolling in index
show buffers (after the first one) was broken.
(mh-index-quit): Bury show buffer instead of killing it. Killing
it, without killing the corresponding folder buffer, can cause
confusion with two folder buffers trying to display in the same
show buffer.
* mh-seq.el (mh-thread-prune-containers): Rewritten without
recursion. Also removed the top-level-p argument since it isn't
required anymore.
(mh-thread-sort-containers): New function factored out from
previous definition of mh-thread-prune-containers. It sorts
message containers in ascending order wrt their message indices.
(mh-thread-generate): Use new mh-thread-prune-containers.
* mh-e.el (mh-remove-all-notation): Fix the test. It was testing
at the wrong place!
2002-10-31 Bill Wohler <wohler@newt.com>
* Makefile, README, import-emacs, mh-comp.el, mh-e.el,
mh-funcs.el, mh-index.el, mh-mime.el, mh-pick.el, mh-seq.el,
mh-speed.el, mh-utils.el: Replaced mh-e with MH-E.
2002-10-31 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-parse-scan-line): Modified to remove user
sequence notation and leave notation for other things alone. This
ensures that threading doesn't lose notations for replied-to
messages.
* mh-e.el (mh-inc-folder): Remove call to mh-widen here and
instead do it in mh-get-new-mail. This way the widening happens
only if new mail is incorporated.
(mh-generate-new-cmd-note): The function now returns the point
from which the new messages start. This will allow threading to do
the right thing.
(mh-get-new-mail): Always call mh-remove-cur-notation. Otherwise
adaptive scan mode leaves two messages marked as current in
certain cases. Fix indentation of if statement. If there are
messages to be incorporated, the folder is widened. If mh-cmd-note
changes set start-of-inc correctly.
(mh-remove-all-notation): Change this function to only remove user
sequence notation and leave notation for replied-to messages and
similar notation alone. This means operations like narrowing to
subject sequence and widening don't lose notations.
2002-10-31 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-insert-mail-followup-to-list): Fixed typo in
docstring and other minor edits. Checkdoc removed trailing spaces.
(mh-insert-signature): Checkdoc flagged docstring. Reverted to
previous value. Added specific name of hook that is run.
(mh-regexp-in-field-p, mh-insert-letter): Checkdoc removed
trailing spaces.
2002-10-31 Jeffrey C Honig <jch@honig.net>
* mh-e.el (mh-show-mode-hook): Remove the unused
mh-show-mode-hook, mh-show-hook is the one that is used.
* mh-utils.el (mh-show-mode): Change the documentation to refer to
mh-show-hook instead of the unused mh-show-mode-hook.
2002-10-31 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-mail-followup-to-list): Set default to nil
and include example in doc string.
2002-10-31 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-indexer): Add customization choice for swish++.
(mh-indexer-choices): Add swish++ choice.
(mh-index-search): Change doc to reflect addition of swish++ option.
(mh-swish++-binary, mh-swish++-directory): New variables for
swish++ interface.
(mh-swish++-execute-search): New function to execute swish++
search.
(mh-swish++-next-result): Function aliased to mh-swish-next-result
since the result format of swish++ is the same as that of swish-e.
(mh-index-search): Always overwrite window-configuration with new
value. This is needed since we don't kill the index-buffer when
quitting which means the window configuration wasn't getting set
properly.
(mh-index-search-again): If index buffer is reused, reset the old
window config to its original value.
2002-10-30 Bill Wohler <wohler@newt.com>
* Makefile (emacs, xemacs): New targets.
(all): Use these targets instead of calling specific targets.
(.PHONY): Added emacs, xemacs, autoloads, custom-loads. Broke up
target and moved pieces into their own sections.
2002-10-30 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-show-font-lock-keywords): Wrap an
'eval-and-compile around its defvar, otherwise byte-compilation
fails on `mh-show-font-lock-keywords-with-cite'.
2002-10-29 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-letter-insert-signature-hook)
(mh-insert-signature): Add a hook to be called before inserting
the signature. Do not attempt to insert the signature if
mh-insert-signature-file-name is nil.
2002-10-29 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-inc-folder): Call mh-widen when mh-narrowed-to-seq
(Closes SF #629233: inc in narrowed folder suboptimal)
* mh-comp.el (mh-insert-letter): Stop using mhl to include a
message before it mangles the header, and supercite fails
(Closes SF #629153: mh-insert-letter uses mhl?).
(mh-insert-prefix-string): Leave point at beginning instead of
end, since that's what sc-cite-original does.
(mh-yank-cur-msg): Adjust for mh-insert-prefix-string change.
2002-10-30 Steve Youngs <youngs@xemacs.org>
* mh-e.el (mh-folder-mode): Check for 'font-lock-auto-fontify'
when in XEmacs so we don't do font-locking unconditionally.
* mh-utils.el (mh-show-mode): Ditto.
2002-10-29 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-refiled-face, mh-folder-cur-msg-number-face)
(mh-folder-to-face, mh-folder-body-face): Define faces instead of
copying them from font-lock faces. This mh-e will look the same
in XEmacs as it does in Emacs.
* mh-utils.el (mh-show-cc-face, mh-show-date-face)
(mh-show-header-face): Ditto.
2002-10-29 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-send-letter): I meant to use
mh-goto-header-field, not mh-get-header-field. The former returns
nil if the header is not found and doesn't need a conditional.
2002-10-29 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-forward): Bug fix. Change 'kill-line for a
'delete-region, because I don't want that text yanked with C-y.
* mh-seq.el (mh-put-msg-in-seq): Add support for selected
region (Closes SF feature request #630324).
2002-10-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-prune-subject): Make the regexp a little
general so that a subject of the form "Re[218]: howdy" would be
properly pruned.
* mh-mime.el (mh-mime-save-part): Copy function definition of
mm-save-part from cvs gnus since that function is buggy in gnus
that comes with emacs21.2.
2002-10-28 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-scan-subject-regexp): Add an expression to match an
optional bracketed number after "Re", such as in "Re[2]:"
(Patch by Satyaki; I checked it and applied).
(mh-folder-font-lock-subject): Adapt to new mh-scan-subject-regexp.
* mh-seq.el (mh-subject-to-sequence): Ditto.
* mh-e.el (mh-folder-sequence-menu): Remove "Toggle Subject
Thread" from menu. mh-toggle-threads is in the Folder menu.
* mh-e.el (mh-folder-sequence-menu): Minor menu text edits.
* mh-utils.el (mh-show-update-sequences): Added to
mh-defun-show-buffer builds; needed for menu.
(mh-show-sequence-menu, mh-show-message-menu)
(mh-show-folder-menu): 3 new menus in mh-show-mode-map that mirror
the menus used in mh-folder-mode.
(mh-show-mode): easy-menu-add the 3 menus.
2002-10-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-goto-msg): Fix the regexp to search so that we
go to the right message. In a threaded folder message 2 may be
present after 26 and the previous regexp would go to 26 when we
really wanted to go to 2!
* mh-seq.el (mh-widen): Add call to mh-recenter to make it like
mh-narrow-to-seq.
2002-10-28 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-show-mime-save-parts): Deleted definition.
(mh-show-mime-map, tool-bar-map): Use mh-mime-save-parts instead
of mh-show-mime-save-parts.
2002-10-28 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-tool-bar-map): tool-bar-add-item key name
bug fix.
* mh-utils.el (mh-show-tool-bar-map): Same.
* mh-e.el (mh-folder-tool-bar-map, mh-folder-seq-tool-bar-map): Same
2002-10-27 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-toggle-threads): Add call to mh-recenter to make
its behavior like that of mh-narrow-to-seq.
2002-10-27 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-mime-save-parts): Renamed from
mh-store-mime-parts for consistency with mh-mime-save-part. Fixed
bug whereby mh-mime-save-parts-directory was not getting
initialized properly from a string-valued
mh-mime-save-parts-default-directory.
(mh-mime-save-parts-default-directory): Ditto. Check your
customizations!
(mh-mime-save-parts-directory): Ditto.
* mh-utils.el (mh-show-mime-save-parts): Renamed from
mh-store-mime-parts.
(mh-show-mime-map): Added keybinding "K a" for
mh-show-mime-save-parts.
* mh-e.el (mh-mime-save-parts) Renamed from mh-store-mime-parts.
(mh-mime-map): Added keybinding "K a" for mh-mime-save-parts.
(mh-help-messages): Added help for "K a".
2002-10-27 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-search-addr-regexp, mh-regexp-in-field-p): Rename
the first to the second (and recode a bit).
(mh-insert-mail-followup-to): Use it.
2002-10-27 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-invisible-headers): Backed out change. Removed
Mail-Followup-To due to objections from Peter and Mark.
2002-10-27 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-msg-is-in-seq): Modified to show info about
whether the message being queried about has been marked to be
deleted or refiled.
* mh-mime.el (mh-insert-mime-security-button): Make
pressed-details a local.
2002-10-27 Steve Youngs <youngs@xemacs.org>
* .cvsignore: New file.
2002-10-26 Steve Youngs <youngs@xemacs.org>
* mh-seq.el (mh-notate-deleted-and-refiled): Don't bind local
variable 'dest', it isn't used anywhere.
* mh-pick.el (mh-do-pick-search): Don't bind local variable
'finding-messages', it isn't used anywhere.
* mh-utils.el: Byte-compiler warning suppression.
(mh-gnus-article-highlight-citation): Rather than redefining
'gnus-cite-face-list', just re-order it.
(mh-show-mode): Force turning on font-lock in XEmacs.
* mh-seq.el: Byte-compiler warning suppression.
* mh-index.el: Byte-compiler warning suppression.
* mh-comp.el: Byte-compiler warning suppression.
* mh-xemacs-compat.el: Add defaliases for 'timerp' &
'cancel-timer' to the equivalent 'itimer' functions.
(rfc822): Require it for 'rfc822-goto-eoh'.
Byte-compiler warning suppression.
* mh-e.el (mh-folder-mode): Force turning on font-lock in XEmacs.
(mh-toggle-threads): Remove duplicate autoload.
Byte-compiler warning suppression.
(mh-folder-unseen-seq-list): Use 'with-temp-buffer' to fix a bug
in XEmacs when font-lock is on.
(mh-folder-unseen-seq-name): Ditto.
2002-10-27 Mark D. Baushke <mdb@gnu.org>
* Makefile: Reorganize to allow for building also compiling for
XEmacs too. Sanitize so that it will work using least-common
denominator versions of 'make'. Tested using GNU make, Solaris make,
and Berkely make.
(all): Use recursive invokation based on the emacs or xemacs
executable passed on the 'make EMACS=xemacs' command line.
(XEMACS_OPTIONS): The incantation to be passed to an xemacs editor
to compile things properly.
(AUTO_PRELOADS): Magic XEmacs glue.
(clean): Ditto.
(autoloads): Ditto.
(custom-loads): Ditto.
2002-10-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-last-msg): Add call to mh-recenter.
2002-10-26 Peter S Galbraith <psg@debia.org>
* mh-comp.el (mh-search-addr-regexp, mh-re-search-to-cc): Remove
`mh-re-search-to-cc' in favour of more generalized new function
`mh-search-addr-regexp'.
(mh-insert-mail-followup-to): Use it.
2002-10-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-copy-seq-to-eob): Avoid rethreading when the
folder is already threaded. This is more efficient and also avoids
problems when the folder is widened.
(mh-thread-inc): Don't try to restore the point to original
location since mh-inc-folder from where this is called changes
point location after calling this function.
* mh-e.el (mh-make-folder-mode-line): Fix a small bug where the
test was wrong.
2002-10-26 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-mail-followup-to): Fix for new defcustom.
2002-10-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-notate-deleted-and-refiled): Remove unused binding
of dest. The problem was pointed out by Steve as well.
* mh-e.el (mh-toggle-threads): Remove duplicate autoload as
pointed out by Steve.
2002-10-26 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-invisible-headers): Added Mail-Followup-To.
2002-10-26 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-mail-followup-to-list): Change defvar to
defcustom.
2002-10-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-remove-all-notation): New function that removes all
notation.
* mh-seq.el (mh-narrow-to-seq): When hiding the original folder
remove all notation. This avoids stale notation hanging around.
Also changes in show buffer and position in folder buffer are
avoided if possible.
(mh-widen): When widening the scan-lines are notated based on the
current state of the folder. This means any changes made when the
folder was narrowed are shown consistently.
(mh-notate-deleted-and-refiled): Update the documentation.
(mh-thread-parse-scan-line): For some reason the ASCII value of
the space character was being used here. This is fixed.
(mh-thread-inc, mh-toggle-threads): Avoid change of point in
folder and message being displayed in shown buffer.
* mh-utils.el (mh-recenter): Rewrite mh-recenter to show fewer
blank lines when point is towards the end of the folder buffer.
2002-10-25 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-mail-followup-to-flag): New boolean
defcustom to append a Mail-Followup-To field to the header. The
insertion is done if the To: or Cc: fields matches an entry in
`mh-insert-mail-followup-to-list'."
(mh-insert-mail-followup-to-list): New defvar. List of addresses
for which a Mail-Followup-To field is inserted.
(mh-re-search-to-cc): New function. Search for REGEXP in To: and
Cc: fields.
(mh-insert-mail-followup-to): New function. Insert
Mail-Followup-To: if To or Cc match `mh-insert-mail-followup-to-list'.
(mh-compose-and-send-mail): Call mh-insert-mail-followup-to if
mh-insert-mail-followup-to-flag is true.
2002-10-25 Mark D. Baushke <mdb@gnu.org>
* mh-utils.el (mh-show-maximum-size): New variable to control
the display of large messages.
(mh-display-msg): Use it (Closes SF #488696).
* mh-seq.el (mh-toggle-threads): Checkdoc fix.
* mh-e.el (mh-reset-threads-and-narrowing): Checkdoc fix.
* mh-comp.el (mh-insert-x-mailer-flag): Renamed from
mh-insert-x-mailer-p. Update docstring.
(mh-send-letter): Use it.
(mh-reply-show-message-flag): Renamed from
mh-reply-show-message-p. Update docstring.
(mh-reply): Use it.
This addresses part of SF #627015.
* mh-e.el (mh-recenter-summary-flag): Renamed from
mh-recenter-summary-p. Update docstring.
(mh-set-scan-mode): Use it.
This addresses part of SF #627015.
2002-10-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-reset-threads-and-narrowing): New function which
resets all thread and narrowing state to completely unthreaded and
widened state. As a side effect, the folder buffer is erased.
(mh-rescan-folder): Reset threads and narrowing state.
* mh-funcs.el (mh-pack-folder-1): Reset threads and narrowing state.
* mh-seq.el (mh-copy-seq-to-eob): Change mh-view-ops after
threading is over so that if user aborts threading, it doesn't
leave mh-e in an inconsistent state.
(mh-toggle-threads): Use mh-scan-folder to populate the folder
buffer instead of mh-rescan-folder which resets threading and
narrowing state.
2002-10-24 Bill Wohler <wohler@newt.com>
* mh-e is completely checkdoc clean now.
* mh-utils.el (mh-clean-message-header-flag): Renamed from
mh-clean-message-header.
(mh-bury-show-buffer-flag): Renamed from mh-bury-show-buffer.
(mh-show-use-goto-addr-flag): Renamed from mh-show-use-goto-addr.
This addresses part of SF #627015.
* mh-mime.el (mh-clean-message-header-flag): Renamed from
mh-clean-message-header.
Checkdoc fixes. This addresses part of SF #627015.
* mh-index.el (mh-clean-message-header-flag): Renamed from
mh-clean-message-header. This addresses part of SF #627015.
* mh-funcs.el (mh-do-not-confirm-flag): Renamed from
mh-do-not-confirm. This addresses part of SF #627015.
* mh-e.el (mh-do-not-confirm-flag): Renamed from
mh-do-not-confirm.
(mh-clean-message-header-flag): Renamed from
mh-clean-message-header.
This addresses part of SF #627015.
* mh-comp.el: checkdoc fixes.
2002-10-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-copy-seq-to-eob): Rewritten to scan the headers
fresh instead of yanking from buffer. This is needed to get
correct threading in copied sequence.
(mh-thread-inc, mh-thread-update-scan-line-map)
(mh-thread-parse-scan-line): Eliminate the use, and hence the
definition of, the kludgy mh-thread-update-scan-line-map. Instead
the functions mh-notate-deleted-and-refiled and
mh-notate-user-sequences are used to get the message marks right.
(mh-thread-generate-scan-lines): Updated to allow the thread tree
to be used in a narrowed folder buffer.
(mh-thread-folder, mh-toggle-threads): Remove
mh-folder-threaded-view-flag.
(mh-thread-old-scan-line-map): New buffer-local variable that
remembers the original scan-line map so that the sequence thread,
narrow, widen will work.
(mh-narrow-to-seq, mh-widen): Remember the scan-line map when
narrowing and restore it when widening.
* mh-e.el (mh-folder-threaded-view-flag, mh-folder-folder-menu)
(mh-regenerate-headers, mh-get-new-mail)
(mh-make-folder-mode-line, mh-process-commands)
(mh-delete-scan-msgs): Remove mh-folder-threaded-view-flag.
Instead (memq 'unthread mh-view-ops) is used to test if the folder
is threaded.
* mh-mime.el (mh-display-emphasis): Shadow article-goto-body here
since we want to do emphasis on the whole of the region and not
just after the first blank line.
(mh-mm-display-part): When displaying a text part show smilies and
emphasis.
* mh-index.el (mh-index-insert-scan): Attempt to keep number of
args to scan small if there are lots of adjacent matches.
(mh-index-quit): Bury index-buffer on quit instead of killing it.
This behavior is more like that of mh-quit.
* mh-seq.el (mh-widen): If folder was threaded after narrowing
then make mh-widen undo the threading instead of erroring out.
2002-10-24 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-toggle-threads): Add a cond (as suggested by
Satyaki) to properly unthread a narrowed-to-sequence.
* mh-seq.el (mh-thread-generate-scan-lines): Fix threading
breakage from partial switch to mh-container-real-child-flag and
to dupl-flag.
* mh-comp.el (mh-yank-cur-msg): Bug fix: specify
(eq t mh-yank-from-start-of-msg) when that's what we want.
2002-10-24 Mark D. Baushke <mdb@gnu.org>
* mh-seq.el (mh-thread-prune-subject): Renamed subject-pruned-p as
subject-pruned-flag.
(mh-thread-inc): Renamed old-buffer-modified-p as
old-buffer-modified-flag.
(mh-thread-generate-scan-lines): Renamed dupl-p as dupl-flag.
This addresses part of SF #627015.
* mh-index.el (mh-index-advance): Renamed backward-p
local variable as backward-flag.
(mh-index-next-button): Renamed backward-p
argument as backward-flag.
(mh-index-show): Renamed display-headers-p argument as
display-headers-flag.
This addresses part of SF #627015.
* mh-e.el (mh-scan-format, mh-version): Use mh-nmh-flag.
(mh-folder-mime-action): Renamed include-security-p
argument as include-security-flag.
(mh-goto-next-button, mh-next-button): Renamed backward-p
argument as backward-flag.
(mh-get-new-mail): Renamed new-mail-p local variable as
new-mail-flag.
(mh-goto-cur-msg): Renamed minimal-changes-p argument as
minimal-changes-flag.
(redraw-needed-flag): Renamed redraw-needed-p local variable as
redraw-needed-flag.
(mh-seq-containing-msg): Renamed include-internal-p argument as
include-internal-flag.
(mh-page-msg): Use mh-page-to-next-msg-flag.
This addresses part of SF #627015.
* mh-mime.el (mh-mhn-compose-insert-flag): Renamed from
mh-mhn-compose-insert-p. Make it buffer-local.
(mh-mhn-compose-type, mh-mhn-compose-external-type,
mh-mhn-compose-forw, mh-edit-mhn): Use mh-mhn-compose-insert-flag.
(mh-mml-to-mime, mh-mml-secure-message-encrypt-pgpmime,
mh-mime-display-part, mh-mime-display-single): Use
mh-gnus-pgp-support-flag renamed from mh-gnus-pgp-support-p.
(mh-mime-display-single): Renamed small-image-p local
variable as small-image-flag.
(mh-mime-inline-part): Renamed local variable inserted-p as
inserted-flag.
(mh-mime-inline-part): Renamed local variable displayed-p as
displayed-flag.
This addresses part of SF #627015.
* mh-comp.el (mh-letter-menu, mh-letter-mode, mh-send-letter):
mh-mhn-compose-insert-flag.
(mh-repl-group-formfile, mh-forward): Use mh-nmh-flag
renamed from mh-nmh-p.
(mh-reply, mh-insert-x-mailer, mh-send-letter): Use mh-nmh-flag.
(mh-letter-mode-map): Use mh-gnus-pgp-support-flag renamed from
mh-gnus-pgp-support-p.
(mh-mml-secure-message-sign-pgpmime): Use
mh-gnus-pgp-support-flag.
This addresses part of SF #627015.
* mh-utils.el (mh-page-to-next-msg-flag): Renamed from
mh-page-to-next-msg-p.
(mh-show-msg): Use mh-page-to-next-msg-flag.
(mh-gnus-pgp-support-flag): Renamed from
mh-gnus-pgp-support-p.
(mh-show-font-lock-fontify-region): Fix docstring per checkdoc.
(with-mh-folder-updating): Renamed argument
save-modification-flag-p as mh-save-modification-flag.
(mh-prompt-for-folder): Renamed new-file-p local
variable as new-file-flag.
This addresses part of SF #627015.
2002-10-24 Mark D Baushke <mdb@gnu.org>
* mh-comp.el (mh-forward): Fix mh-mml-compose-insert-p reference
in last commit to be mh-mml-compose-insert-flag.
(mh-mml-compose-insert-flag): Move defvar to fix compiler warning.
2002-10-24 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-forward): Add support for transient-mark mode.
When using nmh, always specify -mime so as to preserve the
original message(s). If mh-compose-insertion is 'gnus, convert
the mhbuild format forwarding directives into MML.
2002-10-24 Eric Ding <ericding@alum.mit.edu>
* mh-comp.el (mh-send-letter): Fix for earlier change that added
"-mime" for bcc'ed MIME mail; still doesn't work with nmh 1.0, but
at least no longer triggered for every outgoing message!
2002-10-24 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-yank-cur-msg): Fix selected regions for supercite
(see text below).
* mh-comp.el (mh-yank-cur-msg): Fix for supercite. Someone played
with the point and mark setting prior to the call to
'mh-insert-prefix-string and that broke supercite. I put comments
to make it obvious to future coders why those settings exists.
Note that supercite is still broken when a region is selected in
the show buffer. Presumably it's been like that for a long time.
We need to insert the header as well as the selected region oin
that case. I'll submit an SF bug.
2002-10-24 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-yank-from-start-of-msg, mh-reply): Use -noformat
flag to reply when 'autosupercite or 'autoattrib are specified to
prevent duplicate cites of the body of a message.
2002-10-23 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (font-lock-default-fontify-region): Add autoload to
avoid compiler warning.
2002-10-23 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-mode): set fill-paragraph-function to our
own 'mh-fill-paragraph-function instead of simply
'mail-mode-fill-paragraph (because it doesn't handle a non-nil
fill-prefix correctly).
(mh-fill-paragraph-function): New function for mh-letter-mode
fill-paragraph-function in order to handle non-nil fill-prefix.
Call sendmail's mail-mode-fill-paragraph if in the mail header,
else call default fill-paragraph with fill-prefix set to nil.
(Closes SF #489927)
* mh-comp.el (mh-letter-mode): Let's use font-lock even if gnus is
used in show-mode. The reason is that gnus uses static text
properties which are not appropriate for a buffer that will be
edited. So the choice here is either fontify the citations and
header or the header only.
* mh-utils.el (mh-show-font-lock-fontify-region): Limit font-lock
in mh-show-mode to the header. Used when mh-highlight-citation-p
is set to gnus, leaving the body to be dealt with by gnus
highlighting. This fixes gnus text emphasis in mh-show-mode.
(mh-show-mode): In font-lock-defaults, set
font-lock-fontify-region-function to mh-show-font-lock-fontify-region.
2002-10-23 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-mml-attach-file): Prompt for disposition should
be Disposition, not Content-Type. The Content-Type has been
determined automatically.
2002-10-23 Mark D. Baushke <mdb@gnu.org>
* MH-E-NEWS:
s/mh-adaptive-cmd-note/mh-adaptive-cmd-note-flag/
s/mh-show-use-xface/mh-show-use-xface-flag/
s/mh-tool-bar-reply-3-buttons/mh-tool-bar-reply-3-buttons-flag/
This addresses part of SF #627015.
* mh-comp.el:
s/mh-mml-compose-insert-p/mh-mml-compose-insert-flag/
s/mh-xemacs-p/mh-xemacs-flag/
(mh-letter-menu): Use mh-mml-compose-insert-flag.
(mh-insert-x-mailer): Use mh-xemacs-flag.
(mh-mml-compose-insert-flag): Renamed from
mh-mml-compose-insert-p.
(mh-send-letter): Use mh-mml-compose-insert-flag.
This addresses part of SF #627015.
* mh-e.el:
s/mh-folder-threaded-view-p/mh-folder-threaded-view-flag/
s/mh-adaptive-cmd-note/mh-adaptive-cmd-note-flag/
s/mh-xemacs-p/mh-xemacs-flag/
(mh-folder-threaded-view-flag): Renamed from
mh-folder-threaded-view-p. Make it buffer local.
(mh-folder-tool-bar-map): Use mh-tool-bar-reply-3-buttons-flag.
(mh-remove-xemacs-horizontal-scrollbar): Use mh-xemacs-flag.
(mh-make-folder, mh-regenerate-headers, mh-get-new-mail): Use
mh-adaptive-cmd-note-flag.
(mh-folder-folder-menu, mh-regenerate-headers, mh-get-new-mail,
mh-make-folder-mode-line, mh-process-commands,
mh-delete-scan-msgs): Use mh-folder-threaded-view-flag.
This addresses part of SF #627015.
* mh-index.el:
s/mh-adaptive-cmd-note/mh-adaptive-cmd-note-flag/
(mh-index-search): Use mh-adaptive-cmd-note-flag.
This addresses part of SF #627015.
* mh-mime.el:
s/mh-mml-compose-insert-p/mh-mml-compose-insert-flag/
s/mh-xemacs-p/mh-xemacs-flag/
(mh-mml-compose-insert-flag): Renamed from
mh-mml-compose-insert-p. Make it buffer local.
(mh-mml-attach-file, mh-mml-secure-message-sign-pgpmime,
mh-mml-secure-message-encrypt-pgpmime): Use it.
(gnus-local-map-property): Use mh-xemacs-flag.
This addresses part of SF #627015.
* mh-seq.el:
s/mh-folder-threaded-view-p/mh-folder-threaded-view-flag/
(mh-thread-generate, mh-thread-folder, mh-toggle-threads): Use
mh-folder-threaded-view-flag.
This addresses part of SF #627015.
* mh-speed.el:
s/mh-speed-run-flists-p/mh-speed-run-flists-flag/
s/mh-speed-refresh-p/mh-speed-refresh-flag/
(mh-speed-run-flists-flag): Renamed from mh-speed-run-flists-p.
(mh-folder-speedbar-buttons): Use it.
(mh-speed-refresh-flag): Renamed from mh-speed-refresh-p.
(mh-speed-update-current-folder, mh-speed-invalidate-map,
mh-speed-add-folder): Use it.
This addresses part of SF #627015.
* mh-utils.el:
s/mh-xemacs-p/mh-xemacs-flag/
s/mh-tool-bar-reply-3-buttons/mh-tool-bar-reply-3-buttons-flag/
s/mh-show-use-xface/mh-show-use-xface-flag/
(mh-xemacs-flag): Renamed from mh-xemacs-p.
(mh-show-xface-function): Use it.
(mh-tool-bar-reply-3-buttons-flag): Renamed from
mh-tool-bar-reply-3-buttons.
(mh-show-tool-bar-map): Use it.
(mh-adaptive-cmd-note-flag): Renamed from mh-adaptive-cmd-note.
(mh-cmd-note): Use it in description.
(mh-show-use-xface-flag): Renamed from mh-show-use-xface. Use
mh-xemacs-flag.
(mh-show-xface): Use mh-show-use-xface-flag.
This addresses part of SF #627015.
2002-10-23 Bill Wohler <wohler@newt.com>
* Makefile (all): Rather than have to run "make clean all" all the
time, make the default target do a clean so all you have to say is
"make".
* mh-e.el (mh-folder-map): Moved "t (mh-toggle-threads)" to T
prefix.
2002-10-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-indexer-choices, mh-swish-binary): The
executable swish-e can be used to search (just like swish-search).
However the Makefile in swish-e-2.2.2 doesn't install
swish-search. So it is preferable to use swish-e.
2002-10-22 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-letter-mode-map): Added aliases for keybindings.
For example, you now have "C-c C-m C-i" in addition to "C-c C-m
i".
2002-10-22 Mark D. Baushke <mdb@gnu.org>
* mh-mime.el (mh-graphical-smileys-flag): Renamed from
mh-graphical-smileys-p.
(mh-display-smileys): Use it.
(mh-graphical-emphasis-flag): Renamed from
mh-graphical-emphasis-p.
(mh-display-emphasis): Use it. This addresses part of SF #627015.
2002-10-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-insert-mime-security-button): A message is
produced if PGP decryption/verification fails. This addresses
SF# 627025.
2002-10-21 Bill Wohler <wohler@newt.com>
* mh-seq.el (mh-widen): Checkdoc removed the period in the error.
The info node (elisp) Coding Conventions says: "An error message
should start with a capital letter but should not end with a
period."
* mh-e.el, mh-utils.el (mh-tool-bar-reply-3-buttons): Moved
defcustom to mh-utils because I got an error about a nil value for
mh-tool-bar-reply-3-buttons when I fired up mh-rmail.
* mh-comp.el, mh-funcs.el, mh-mime.el, mh-pick.el: Moved (provide)
to the end of the file to be consistent with most other files (see
additional rationale in mh-e.el description below).
* mh-e.el: Had to remove eval-when-compile from the (require 'cl)
here too (because the remove-if generated a warning in CVS Emacs).
Moved (provide) to the end of the file to be consistent with most
other files. My guess is that this is good to keep a feature from
being "provided" if the file craps out while being loaded.
2002-10-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-reply, Info-goto-node): Add autoloads to avoid
compiler warnings.
(mh-tool-bar-reply-3-buttons): Add defvar to avoid compiler
warning.
* mh-seq.el (mh-narrow-to-seq): Remember that a narrowing has
occurred.
(mh-valid-view-change-operation-p): New function that checks if
the widening or unthreading that we are about to perform is
allowed.
(mh-widen): Check if widening is applicable.
(mh-thread-inc, mh-thread-folder): Use delete-region instead of
erase-buffer. This means if the buffer is narrowed then the hidden
parts aren't removed. This allows widening of the folder later on.
(mh-toggle-threads): Maintain mh-view-ops.
* mh-e.el (mh-view-ops, mh-folder-mode): New buffer-local variable
that keeps track of the sequence in which threading and narrowing
of the folder buffer has been carried out. This is needed so that
narrowing followed by threading (or vice versa) behaves in a
reasonable manner.
(mh-regenerate-headers): Use delete-region instead of
erase-buffer.
(mh-make-folder-mode-line): Change mh-first-msg-num and
mh-last-msg-num conservatively. This might show a larger range in
the mode-line but allows the unthreading to not miss messages
present initially.
2002-10-21 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-graphical-emphasis-p): Added _underline_ to the
docstring, as well as the source of the strings,
gnus-emphasis-alist.
(mh-graphical-emphasis-p, mh-graphical-smileys-p): Set the default
to t.
2002-10-21 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-show-mode): Invoke new toolbar.
(mh-show-tool-bar-map): New tool-bar for mh-show-mode, similar to
mh-letter-mode.
2002-10-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-display-msg): Call the smiley display function
after the call to mh-show-mode. This is needed since mh-show-mode
kills all buffer-local variables and resets the variable that
controls display of graphical smileys.
2002-10-21 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-folder-mime-action): Change mime to MIME in message.
* mh-comp.el (mh-mml-to-mime autoload): Ditto.
2002-10-21 Mark D Baushke <mdb@gnu.org>
* mh-mime.el (smiley-region): Use load for a non-fatal dependency
on the smiley library.
2002-10-21 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-forward): Search for a blank line as well as
mail-header-separator.
(mh-letter-mode): Search for a blank line as well as
mail-header-separator.
(mh-send-letter): The default BCC encapsulation will make a MIME
message unreadable. If we are running nmh and the letter contains
a Bcc: and a Content-Type: field, add the -mime switch to to the
arguments to send.
2002-10-21 Peter S Galbraith <psg@debian.org>
* mh-utils.el: Add a mh-defun-show-buffer call to define
mh-show-pack-folder.
2002-10-21 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-store-mime-parts): Simplify code a bit.
* mh-e.el (mh-help-messages): Update help message for changed
keybindings.
2002-10-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-invalidate-map): Invalidate
mh-speed-folders-cache before it is used by mh-speed-folders. Also
fix indentation of if statement.
(mh-speed-folder-size): The folder name should be extracted from
the speedbar buffer and not from the temp buffer has was happening
before.
(mh-speed-folder-size): Harden the function some more. It
shouldn't produce errors any more unless flist really didn't work.
2002-10-21 Bill Wohler <wohler@newt.com>
* mh-seq.el (mh-put-msg-in-seq): Formatting only. The reason I was
in there is because I was trying to use mh-put-msg-in-seq and
mh-msg-is-in-seq non-interactively and found that although the
docstring says it uses the current message by default, I got
errors if I passed in nil for the message. Is this expected, or is
this a bug? I suppose the fix would be to make the arguments
optional, right? This would cause the arguments in
mh-put-msg-in-seq to be reversed, however. Might be a backwards
compatibility problem.
* mh-speed.el (mh-speed-view): Convert default size to string
before passing it to read-string. This was done because XEmacs
can't handle a numeric value for the default.
2002-10-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-mode-map, mh-show-folder-map)
(mh-show-sequence-map, mh-show-thread-map, mh-show-extract-map)
(mh-show-digest-map, mh-show-mime-map): Interactive functions
callable in show buffer are now prefixed with mh-show.
* mh-seq.el (mh-notate-deleted-and-refiled): Take into account the
changes to mh-refile-list and the removal of the 'deleted
sequence.
(mh-toggle-threads): Changing from threaded to normal view doesn't
try to push out message refiles and deletions to MH.
* mh-e.el (mh-rescan-folder, mh-scan-folder): Add a new optional
argument to both functions that prevents them from carrying out
pending refiles and deletes.
(mh-undo): Remove dead code.
(mh-delete-a-msg, mh-undo-msg): Get rid of the 'deleted sequence.
The same information is present in mh-delete-list any way.
(mh-refile-a-msg, mh-undo-msg, mh-process-commands): Change the
semantics of mh-refile-list to make it self-contained. This
variable now contains a list of lists. The first element of each
sublist is the destination folder name. The remaining elements are
the messages that are to be refiled to the destination folder.
(mh-toggle-threads, mh-folder-folder-menu): Use mh-toggle-threads
instead of mh-thread-folder.
2002-10-20 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-store-mime-parts): Bug fix? Make this command
work when in the show buffer, and not just in the folder buffer
pointing to a message.
2002-10-20 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-narrow-to-subject-sequence): Renamed from
mh-narrow-to-subject-thread.
(mh-subject-to-sequence): Renamed from mh-subject-thread-to-sequence.
(mh-delete-subject-sequence): Renamed from mh-delete-subject-thread.
(mh-next-unseen-subject-sequence): Renamed from
mh-next-unseen-subject-thread.
(mh-toggle-subject-thread): Removed. :-(
* mh-e.el: s/subject-thread/subject-sequence/
(mh-thread-map): Bind mh-widen to "w".
* mh-utils.el: s/subject-thread/subject-sequence/
(mh-show-thread-map): Bind mh-widen to "w".
2002-10-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-folder): This function is no longer
interactive. The mh-toggle-threads is the interactive function
that gets called by the user. Also the already computed values in
mh-first-msg-num and mh-last-msg-num are used instead of
recomputing the first and last message indices in the current
folder.
(mh-toggle-threads): New interactive function that toggles
threaded view of the folder.
* mh-utils.el (mh-letter-toggle-threads): New interactive function
which toggles thread view from show buffer. This function replaces
mh-letter-thread-folder.
(mh-show-folder-map): Use mh-letter-toggle-threads instead of
mh-letter-thread-folder.
* mh-e.el (mh-folder-map): Use mh-toggle-threads instead of
mh-thread-folder.
2002-10-20 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-scan-folder): Formatting only.
(mh-goto-cur-msg): Removed call to mh-last-msg in those cases
where there isn't a current message. Since I've started using the
speedbar to read my mh-e mail, I've had to use M-< every time to
go to the beginning of the new messages. Very annoying! Thus, if
there isn't a current message, the cursor is left alone, which
sounds like the right thing to do anyway.
2002-10-19 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-subject-thread-to-sequence): Bug fix. After
making the 'subject sequence real, I now have to delete it globally.
* mh-seq.el (mh-toggle-subject-thread): Make toggle back to full
scan exactly mh-widen (removed moving to current message).
* mh-seq.el (mh-subject-thread-to-sequence): Make 'subject
sequence a real one, exported to MH. This means you can, for
example, mh-forward it. But it also shows up with a mark in the
scan output. (Closes SF #489445).
2002-10-19 Bill Wohler <wohler@newt.com>
* mh-speed.el (mh-speed-view): If there weren't any unseen
messages, and you specified a string (a sequence like "last") when
prompted for the number of messages to display, you got an error.
This has been fixed.
2002-10-19 Mark D Baushke <mdb@gnu.org>
* mh-e.el (mh-last-destination-folder): Destination of last refile
command.
(mh-last-destination-write): Destination of last write command.
(mh-refile-msg): Use 'mh-last-destination-folder and update both it
and 'mh-last-destination.
(mh-write-msg-to-file): Use 'mh-last-destination-write and update
both it and 'mh-last-destination (Closes SF #580772).
2002-10-19 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-yank-from-start-of-msg): Changed default to
'attribution.
(mh-letter-mode-map): Removed commented-out keybindings as well as
alias "C-c C-m a (mh-compose-insertion)." Prefer "C-c C-m i."
* mh-utils.el: Removed autoload of help. It no longer appears to
be necessary in cvs Emacs (21.4).
2002-10-18 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-execute-commands): Doc fix.
(mh-compat-write-file-hook): Renamed to
mh-write-file-functions-compat.
(mh-folder-mode): Add mh-write-file-functions-compat instead of
mh-compat-write-file-hook
2002-10-18 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-invisible-headers-show-xface): Killed this
variable.
(mh-invisible-headers): Use 'mh-show-use-xface instead of
'mh-invisible-headers-show-xface to determine whether to render
the X-Face header line visible or not.
2002-10-18 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-compat-write-file-hook, mh-folder-mode): Use the new
macro mh-compat-write-file-hook to use write-file-functions for
Emacs 21.4 and local-write-file-hooks for older versions.
2002-10-18 Mark D Baushke <mdb@gnu.org>
* mh-utils.el (mh-invisible-headers): Add more anti-spam headers.
2002-10-18 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-mml-forward-message): mml-attach-file constructs
a malformed composition if the description string is empty, so
test for that and call mml-attach-file without that argument if
it's an empty string (closes SF #625168).
2002-10-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-keymap): Removed extra binding of " ".
(mh-index-folder-mode-help-messages): Made the cheat sheet entry
of quit like the others.
(mh-index-search): If space was pressed in the index buffer before
a search result has been shown with ".", the old show buffer would
be scrolled. This is confusing since the index and show buffer
contents are contradictory. Killing the show buffer here avoids
this problem.
(mh-index-configure-windows): Refine the window configuration
logic. Avoid the two window view unless there is a message being
displayed in the show buffer.
(mh-index-scroll-up): Rewrite this function. The old version had a
bizarre problem where the show buffer wouldn't be scrolled if the
speedbar was present.
(mh-index-scroll-down): Rewritten because of similar reason as
above.
2002-10-17 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-reply): Add an undo boundary in the undo list
before calling 'mh-yank-cur-msg (closes SF #623693).
2002-10-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-folder-mode): Use local-write-file-hooks instead of
write-file-hooks. This is required for XEmacs and also the right
thing according to GNU Emacs21 documentation.
2002-10-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate): Get threading to work correctly
on partial folders. The fix here disregards messages that aren't
already present in the buffer.
(mh-thread-folder): When querying scan about thread info try to
avoid asking about messages that aren't present in the folder
buffer. A more efficient fix would be to ask scan about just the
messages that are present instead of a range of messages. However
that runs the risk of sending long command lines to scan. Another
change was to populate the mh-scan-line-map early so that the
change in mh-thread-generate would work.
(mh-thread-generate-scan-lines): In case duplicates are present
make one of them the pseudo parent of the rest. This makes it look
prettier if there are multiple duplicates at top level.
* mh-comp.el (mh-edit-again): If a buffer in show-mode is being
reused then reinsert message file. This should fix SF #624283.
* mh-mime.el (mh-mm-display-part): Make sure mh-display-part is
always called when we want to remove the displayed MIME part.
2002-10-16 Bill Wohler <wohler@newt.com>
* mh-speed.el (mh-speed-folder-size): checkdoc fix.
(mh-speed-view): Tweaked output to mirror gnus verbiage. Offer
to view number of messages in folder rather than mh-large-folder.
Replaced (intern mh-unseen-seq) with mh-unseen-seq since the
former was generating errors.
2002-10-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-large-folder): New customizable variable to
control mh-e's perception of large folders.
(mh-speed-folder-size): New function which computes the size of
folder on current line.
(mh-speed-view): Modified to handle large folders. If the folder
being clicked has unseen messages then only those messages are
shown. Otherwise if number of messages in folder is larger than
mh-large-folders then the user is asked for the number of messages
to be shown. If the folder satisfies neither of the above cases
then it is displayed in its entirety
2002-10-15 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-index-keymap): Use gnus-define-keys. Sorted.
Noticed that there were two key bindings for SPACE...
* mh-speed.el (mh-folder-speedbar-key-map): Ditto (except for the
dup SPACE binding).
Completed help in other modes:
* mh-utils.el (mh-xemacs-p): Fixed doc.
(mh-show-mode-map, mh-show-folder-map, mh-show-sequence-map)
(mh-show-thread-map, mh-show-extract-map): Added binding for
mh-help.
* mh-pick.el (mh-search-folder): Added startup help message.
(mh-pick-mode-help-messages): New variable that contains help
messages for pick buffer.
(mh-pick-mode): Set local buffer variable mh-help-messages to
mh-pick-mode-help-messages.
* mh-index.el (mh-index-keymap): Added binding for mh-help
(mh-index-folder-mode-help-messages): New variable that contains
help messages for MH Index buffer.
(mh-index-folder-mode): Set local buffer variable mh-help-messages
to mh-index-mode-help-messages.
* mh-funcs.el (mh-help, mh-prefix-help): Call
substitute-command-keys on the help messages.
* mh-e.el (mh-help-messages): Added ,. Ran C-M-q.
(mh-help): This autoload doc is now used for more than just the
MH-Folder, so drop that specific text.
* mh-comp.el (mh-edit-again, mh-extract-rejected-mail)
(mh-forward, mh-reply, mh-send-sub): Call mh-letter-mode-message
to display a help message at startup.
(mh-letter-mode): Set local buffer variable mh-help-messages to
mh-letter-mode-help-messages.
(mh-letter-mode-help-messages): New variable with help messages
for the MH-Letter buffer.
(mh-letter-mode-message): New function that displays a startup
help message.
(mh-letter-mode-map): Added binding for mh-help. Sorted.
2002-10-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speedbar-selected-folder-with-unseen-messages-face)
(mh-speedbar-folder-face, mh-speedbar-selected-folder-face)
(mh-speedbar-folder-with-unseen-messages-face): New faces for mh-e
speedbar.
(mh-folder-speedbar-buttons, mh-speed-update-current-folder)
(mh-speed-add-buttons): Use the new faces.
(mh-speed-normal-face, mh-speed-bold-face): Functions to convert
to bold face and back to normal face.
(mh-speed-set-face): Removed.
(mh-speed-highlight): Modified to allow it to be used instead of
mh-speed-set-face. Also changes were made to fontify folders with
unread messages.
(mh-speed-parse-flists-output, mh-speed-parse-flists-output)
(mh-speed-invalidate-map): Use mh-speed-highlight instead of
mh-speed-set-face.
2002-10-15 Bill Wohler <wohler@newt.com>
* mh-mime.el, mh-seq.el, mh-speed.el, mh-utils.el: It appears that
the cl package has been restructured in 21.4 in such a way that
the use of eval-when-compile no longer suppresses warnings when
compiling so that (require 'cl) must be called directly (maybe
this is a bug in 21.4 ;-). Thus the autoloads of cl are no longer
needed. Now compiles clean under 21.4.
* mh-e.el (mh-folder-mode): The use of local-write-file-hooks is
deprecated in Emacs 21.4, so use add-hook write-file-functions (or
write-file-hook for older versions) with the LOCAL argument
instead. Now compiles clean under 21.4.
* mh-comp.el (mh-yank-cur-msg): Push a mark at the opposite end of
the included text to make it easy to jump or delete to the other
end of the included text.
2002-10-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-insert-prefix-string): Remove the erroneous use
of set-mark and other related functions.
2002-10-14 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-yank-from-start-of-msg): Fixed documentation. It
isn't ignored if there is a region. It is still used for the
attribution.
(mh-yank-cur-msg): Removed unnecessary push-mark when snarfing the
entire message. Move the cursor to the end of the snarfed message
if there is a region. In this case, push a mark so user can pop to
the beginning of the snarfed fragment.
(mh-insert-prefix-string): This calls set-mark which I find
suspect since I found that my last user mark was deleted after
yanking a message. Added a comment to this effect. Will probably
add a bug report...
* README (Installed, Supported versions): To appear in GNU Emacs
21.3; supported on Emacs 21, 20.7 and XEmacs 21.
* mh-funcs.el (mh-concat-list): Deleted. Use mapconcat instead.
(mh-help, mh-prefix-help): Use mapconcat instead of mh-concat-list.
(mh-ephem-message): Use "%s" in message.
* mh-funcs.el (mh-concat-list): New function to concatenate a list
of strings into a single string. I would have thought elisp
already contained a function like this, but I couldn't find it.
(mh-ephem-message): New function to display a message in the
minibuffer ephemerally. minibuffer-message seemed like the right
function, but it writes to the current buffer oddly enough.
(mh-help, mh-prefix-help): New functions to display command
cheat sheets in the minibuffer (closes SF #493740). It would be
nice to refactor these two into a single function if possible.
* mh-e.el (mh-folder-mode-map, mh-folder-map, mh-sequence-map)
(mh-thread-map, mh-extract-map): Added ? keybinding for `mh-help'
and `mh-prefix-help' (closes SF #493740).
(mh-help-messages): New variable to hold various help messages.
(mh-help, mh-prefix-help): Autoload from mh-funcs.el.
2002-10-13 Bill Wohler <wohler@newt.com>
* mh-index.el (mh-glimpse-directory, mh-swish-directory,
mh-namazu-directory): New variables that hold the name of the
configuration and indexing directory. All are now hidden `.'
directories.
* mh-e.el, mh-funcs.el, mh-index.el, mh-mime.el, mh-pick.el,
mh-seq.el, mh-xemacs-compat.el (Docstrings): Converted comments to
docstrings, reworded some docstrings to conform to Emacs
documentation conventions, and eliminated all checkdoc warnings
(except for -flag, which we'll fix after 6.2 is released).
2002-10-13 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-swish-next-result): Fix a bug in a corner case
where the lack of a trailing "/" caused the function to wrongly
filter out correct hits. This should fix SF #622679.
2002-10-12 Steve Youngs <youngs@xemacs.org>
* mh-utils.el (mh-xemacs-p): Simplify it, don't test for
'defvaralias' and don't use 'running-xemacs'.
2002-10-11 Bill Wohler <wohler@newt.com>
* mh-comp.el: (Docstrings): Eliminated all checkdoc warnings by
converting comments to docstrings and rewording some docstrings to
conform to Emacs documentation conventions.
2002-10-11 Steve Youngs <youngs@xemacs.org>
* mh-utils.el (mh-xemacs-p): New.
(mh-show-use-xface): Use it.
(mh-show-xface-function): Ditto.
* mh-e.el (toplevel): Ditto.
(mh-remove-xemacs-horizontal-scrollbar): Ditto.
(mh-folder-mode-map): Ditto.
* mh-comp.el (mh-insert-x-mailer): Ditto.
* mh-mime.el (gnus-local-map-property): Ditto.
(mh-mml-to-mime): Move (require 'mh-utils) to toplevel.
(mh-prompt-for-folder): Autoloading this not needed because
mh-utils is now required at toplevel.
(mh-show-xface): Ditto.
(mh-show-addr): Ditto.
2002-10-11 Bill Wohler <wohler@newt.com>
* Makefile (EMACS_HOME): Set default to $(TOP)/../emacs so it
would be useful.
* mh-utils.el (mh-invisible-headers): Added various spam header
fields.
(mh-path-search): Removed argument `func-p' and related code. It
was not documented and no one used it.
(Docstrings): Converted comments to docstrings, reworded some
docstrings to conform to Emacs documentation conventions, and
basically eliminated all checkdoc warnings (except for -flag
warnings).
2002-10-11 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate): Kill dead code.
2002-10-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-region-to-sequence): Don't include point-max in
region (closes SF #621632).
* mh-utils.el (mh-defun-show-buffer): Fix call of
frame-first-window to work with XEmacs. Also avoid warning about
cur-buffe-name in XEmacs.
(mh-modify, mh-goto-msg): Remove dead code.
* mh-speed.el (mh-speed-toggle, mh-speed-add-buttons): Remove dead
code.
* mh-seq.el (mh-subject-thread-to-sequence, mh-thread-get-message,
mh-thread-generate, mh-thread-folder): Remove dead code.
* mh-mime.el (mh-mm-inline-message): Remove dead code.
* mh-index.el (mh-index-search): Remove dead code.
* mh-comp.el (mh-open-line): Remove dead code.
* mh-e.el (mh-folder-mode): Use the macro
mh-remove-xemacs-horizontal-scrollbar to avoid compiler-warning in
Emacs.
(mh-remove-xemacs-horizontal-scrollbar): New macro to avoid
compiler-warnings.
2002-10-10 Mark D Baushke <mdb@gnu.org>
* Makefile (EMACS_OPTIONS): New macro for command-line compile
options.
(EMACS): Allow the user to specify which emacs command to use for
the compile.
(COMPILE_COMMAND): Combine the compile command with its options.
(.el.elc): Use the new $(COMPILE_COMMAND).
2002-10-10 Mark D Baushke <mdb@gnu.org>
* mh-speed.el (mh-speed-select-attached-frame): Define a new
compatibility macro for getting to the attached-frame.
(mh-speed-update-current-folder): Use it.
2002-10-10 Mark D Baushke <mdb@gnu.org>
* mh-speed.el (mh-speed-update-current-folder): Use
'dframe-select-attached-frame if we are in a newer speedbar
version that no longer supports the 'speedbar-attached-frame
variable.
2002-10-10 Steve Youngs <youngs@xemacs.org>
* mh-speed.el (mh-speed-update-current-folder): Use
'dframe-select-attached-frame' if we're in XEmacs.
* mh-e.el (mh-folder-mode): Remove the horizontal scrollbar from
the MH-Folder buffer if we're in XEmacs.
2002-10-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-show-xface-function): New global that stores
what function needs to be called to display X-Face.
(mh-show-xface): Rewritten to avoid compiler warning.
2002-10-09 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-exchange-point-and-mark-preserving-active-mark):
Simplify code for all emacsen to avoid byte-compilation warnings.
2002-10-09 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-mm-display-part): If a sub-part of the current
part is an inline image then clicking the button keeps the image
around. The change fixes this bug.
2002-10-09 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-exec-cmd-output): Use new function
'mh-exchange-point-and-mark-preserving-active-mark instead of
'exchange-point-and-mark. Fixes a bug in emacs20 and XEmacs21.
(mh-exchange-point-and-mark-preserving-active-mark): New function.
Does like 'exchange-point-and-mark but doesn't activate the mark.
* mh-comp.el (mh-letter-menu): Allow access to "Pull in All
Compositions" menu entries when edits have really occurred.
Works with "forw: -mime" mh_profile entry, so this fixes a bug.
* mh-mime.el (mh-mime-inline-part, mh-mm-display-part): Use
line-beginning-position and line-end-position instead of
point-at-bol and point-at-eol XEmacs functions.
* mh-xemacs-compat.el: Added line-end-position and
line-beginning-position compatibility aliases.
2002-10-08 Mark D. Baushke <mdb@gnu.org>
* mh-utils.el (mh-scan-msg-format-regexp): The regexp to find
%number(msg).
(mh-scan-msg-format-string): Format to be used with the current
maximum width of message number for the folder in the
`mh-upate-scan-format' function.
(mh-update-scan-format): Use `mh-scan-msg-format-regexp' for greater
flexibility. The message number is no longer anchored to the
beginning of the `mh-scan-format-nmh' or `mh-scan-format-mh' format
strings. The `mh-update-scan-format' allows for using zero-filled
message numbers.
2002-10-08 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-folder-menu): Add entry for "Thread Folder".
2002-10-07 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate): Use mh-progs to get path to mh
executables.
* mh-speed.el (mh-speed-flists): Use mh-progs to get path to mh
executables right.
(mh-speed-folders-actual): Same as above.
2002-10-05 Steve Youngs <youngs@xemacs.org>
* mh-comp.el (mh-yank-from-start-of-msg): Make default setting 't'
a const.
* mh-xemacs-compat.el (match-string-no-properties): Rewrite as a
defsubst using 'buffer-substring-no-properties' so we don't grab
any extents.
(rfc822-goto-eoh): Removed. This exists in the XEmacs mail-lib
package.
(mail-header-end): Ditto.
(mail-mode-fill-paragraph): Ditto.
2002-10-05 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-invalidate-map): When called interactively
the function will clear mh-speed-folders-cache.
2002-10-02 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-insert-mime-button): Rewrite without using
replace-match.
2002-10-01 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-file-mime-type-substitutions): Reorder code to
avoid compiler warning.
2002-10-01 Bill Wohler <wohler@newt.com>
* Makefile (MH-E-ETC): Moved ChangeLog into MH-E-ETC-ETC since it
shouldn't get installed in Emacs.
(install-emacs): Install MH-E-IMG into Emacs' lisp/toolbar and
MH-E-IMG2 into Emacs' lisp/mail.
2002-10-01 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-tool-bar-reply-3-buttons): New customization.
Non-nil means use three buttons for reply commands in tool-bar.
If you have room on your tool-bar because you are using a large
font, you may set this variable to expand the single reply
button into three buttons that won't lead to minibuffer prompt
about who to reply to.
(mh-folder-tool-bar-map): Use mh-tool-bar-reply-3-buttons to
decide how many buttons to use for replying.
* mh-mime.el (mh-file-mime-type-substitutions)
(mh-file-mime-type-substitute): Fix typos and doc strings.
2002-09-30 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-file-mime-type): Run Content-Type string returned
by file command through mh-file-mime-type-substitute (see below).
(mh-file-mime-type-substitute): Possibly change Content-Type
string using mh-file-mime-type-substitutions variable. This is
mostly because all MS-Office file are seen as application/msword
by the file command.
(mh-file-mime-type-substitutions): New variable. Defines
substitutions to make for Content-Type returned from file command.
2002-09-27 Bill Wohler <wohler@newt.com>
* README: Moved Id to end of file since it broke outline mode at
the beginning.
* import-emacs (release): Renamed "mainline" tag to
"emacs-mainline" to correspond with existing CVS tag.
(EMACS_HOME): Fixed typo in docstring.
* mh-utils.el (mh-folder-name-p, mh-defun-show-buffer): Lowercase
NIL and T in docstring.
(mh-update-scan-format): Fixed typo.
* mh-comp.el, mh-e.el, mh-pick.el, mh-utils.el: Updated from CVS
Emacs. The only new thing appears to be to downcase NIL and T in
the documentation.
2002-09-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate): The threading code will now be
more resistant to corruption of messages. Before the change any
corruption of message x would cause all messages with indices
higher than x to be neglected when threading!
2002-09-23 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-store-mime-parts): Don't store value into
user-customizable variable mh-store-mime-parts-default-directory
and use mh-store-mime-parts-directory instead.
2002-09-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-prune-subject): Use regular expressions to
make the subject pruning behave the way it is specified in the
imap-thread RFC.
* mh-speed.el (mh-speed-folders-actual): Don't use pop when we
are not going to use the first element. This avoids a compilation
warning with cvs emacs.
2002-09-19 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-display-msg): Put the call to
set-buffer-modified after mh-show-mode. This is needed for CVS
emacs since calling mh-show-mode marks the buffer as modified if
font-lock is on.
2002-09-17 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-store-mime-parts-default-directory): Renamed from
mh-store-mime-parts-directory
(mh-store-mime-parts-directory): Renamed from
mh-store-mime-parts-directory-default.
2002-09-16 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mail-citation-hook): Doc tweaks suggested by Bill.
2002-09-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (autoloads): Reorder autoload of mh-reply to avoid
compiler warning.
2002-09-03 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-store-mime-parts-directory): New defcustom.
Default directory to use for mh-store-mime-parts.
(mh-store-mime-parts): New Command. Store the MIME parts of the
current message.
(mh-store-mime-parts-directory-default): New internal working
variable. Default to use for mh-store-mime-parts-directory, set
from last use.
* mh-e.el (mh-folder-seq-tool-bar-map): Add mh-store-mime-parts to
toolbar.
2002-08-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-generate-scan-lines): In threaded view,
complete scan lines are printed for all messages (not just the
ones at the top of a thread).
* mh-index.el (mh-index-insert-scan): Replace use of kill-line
since that pollutes the kill-ring.
* mh-comp.el (autoloads): Add autoloads for search and subseq to
get rid of compiler warnings.
2002-08-19 Peter S Galbraith <psg@debian.org>
* reply-to.xpm, reply-to.pbm, reply-from.xpm, reply-from.pbm,
* reply-all.xpm, reply-all.bpm: New icons for various reply methods.
* mh-e.el (mh-folder-tool-bar-map): Split reply button into three
that won't prompt for "from", "to" and "all".
* mh-comp.el (mh-reply): Put variable reply-to in the interactive
list since it's specified on the command line for the new toolbar.
* mh-comp.el (mail-citation-hook): Tweak docs concerning
historical usage for supercite.
(mh-yank-from-start-of-msg): Add settings 'supercite and
'autosupercite. Rename 'automatic to 'autoattrib.
(mh-insert-prefix-string): Invoke sc-cite-original if
mh-yank-from-start-of-msg is et to 'supercite or 'autosupercite.
2002-08-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (compilation-fix): Reorder defvars to avoid warnings
during compilation.
2002-08-17 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-yank-from-start-of-msg): Add 'automatic choice.
Do as for `attribution' automatically when show buffer matches the
message being replied-to.
(mh-reply): Call 'mh-yank-cur-msg when mh-yank-from-start-of-msg
is set to 'automatic and show buffer matches message number being
replied-to.
(mh-show-buffer-message-number): New helper function to get the
message number of the current show-buffer.
(mh-yank-cur-msg): Handle 'automatic choice the same as 'attribution.
(mh-yank-cur-msg): Bug fix. It would bail on error if
mh-show-buffer didn't exists.
2002-08-16 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-x-mailer): It wrongly assumed that Emacs
was used even when XEmacs was used. Fixed so X-Mailer header is
more exact about what we are using.
2002-08-15 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-version): Change CVS version number to 6.1+cvs just
so X-Mailer header is more exact about what we are using.
* mh-mime.el (mh-mhn-compose-insertion, mh-mhn-compose-anon-ftp,
mh-mml-attach-file):
"Jeffrey P. Morgenthaler" <jpmorgen@congee.gsfc.nasa.go> reported
that "require" in emacs 20.3 doesn't handle 3 arguments. We
use "load" at the top of file elsewhere anyway to handle such a
case of non-essential loading, so switch to that here.
2002-08-06 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-funcs.el (autoload): Add autoload for mh-speed-invalidate-map.
* mh-speed.el (mh-speed-add-folder): New function to make the
speedbar aware of new folders when they are created by mh-e.
* mh-utils.el (mh-prompt-for-folder): Use mh-speed-add-folder to
tell speedbar that new folder is being created. Also use folder
instead of mkdir to create new folders.
2002-08-01 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-decode-quoted-printable): Conditionalize the
limit of search for quoted-printable. If we're using mm-decode
for MIME decoding, it's possible that `mimedecode' could mess our
message, so we only run a full search for quoted-printable parts
when not using gnus' mm-decode. When using mm-decode, mimedecode
can still help by handling the case of the whole message being
quoted-printable as opposed to only a part.
2002-07-31 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-compose-insertion): Moved from mh-mime.el because
the pulldown menu were broken in XEmacs21 from this variable being
undefined.
2002-07-28 Mark D. Baushke <mdb@gnu.org>
* mh-utils.el (mh-show-mode): Use the default paragraph-start
rather than the inherited text-mode value.
2002-07-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-duplicates): New hash table to track
duplicate messages.
(mh-thread-get-message): Remove debug code.
(mh-thread-canonicalize-id): Modified to handle messages without
message-id header. Such messages are given distinct copies of the
empty string as message-id.
(mh-thread-generate): The function was inadvertently rebuilding
the thread tree when message refiles and message deletes are
processed. The change here fixes that. Also code has been added to
keep track of duplicate message-id's.
(mh-thread-generate-scan-lines): Modified to print scan lines for
duplicate messages (that is messages with the same message-id).
(mh-thread-forget-message): Modified to maintain
mh-thread-duplicates.
2002-07-22 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-parse-flists-output): Use delete-region
instead of kill-region. Otherwise the kill ring gets polluted.
2002-07-16 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-thread-update-scan-line-map): New function to
refresh the stale scan lines.
(mh-thread-inc): Update old scan lines when mh-thread-inc is
called. Otherwise notations for deleted and refiled messages get
lost and the folder display gets out of sync with real mh-e state.
* mh-mime.el (mh-mm-display-part): Call Gnus citation highlight
code when text part is displayed. Otherwise buttonized text parts
aren't correctly fontified when they are displayed.
2002-07-15 Mark D. Baushke <mdb@gnu.org>
* mh-utils.el (mm-decode): Use load for the Non-fatal depencency
on the mm-decode library.
* mh-mime.el (mm-decode, mm-uu, mm-view): Use load for the
Non-fatal depencencies on the mm-decode, mm-uu and mm-view
libraries.
2002-07-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-require, mh-autoload): Remove these macros.
(mh-decode-mime): Initialized to t iff the mm-decode library is
present in the load-path.
* mh-mime.el (mh-require): Don't use it anymore.
2002-07-15 Mark D Baushke <mdb@gnu.org>
* mh-utils.el (mh-update-scan-format): Rewrite for compatibility
with Xemacs as replace-match appears not to have identical
functionality with FSF emacs.
(mh-scan-msg-format-regexp): Deleted. This regexp is now hardcoded
into the mh-update-scan-format function.
2002-07-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el: Add message threading code.
* mh-utils.el (mh-letter-thread-folder): New interactive function
that allows switching to threaded view from show buffer.
(mh-show-folder-map): Bound "F t" to call mh-letter-thread-folder.
(mh-goto-msg): Replace the function to not assume that messages
are sorted in the folder buffer.
* mh-e.el (mh-folder-threaded-view-p): New buffer local variable
in the folder buffer that records whether threaded view is being
used currently.
(mh-scan-subject-regexp, mh-scan-format-regexp): Get font lock
working for threaded view as well.
(mh-regenerate-headers): Reset mh-folder-threaded-view-p to nil.
(mh-get-new-mail, mh-process-commands): Do incremental threading
if folder is in threaded view.
(mh-delete-scan-msgs): Update thread tables if folder is in
threaded view.
(mh-folder-map): Add "F t" as key binding for mh-thread-folder
* mh-comp.el (mh-yank-cur-msg): Bug fix. mh-show-buffer is only
has a meaningful value in the folder buffer.
2002-07-11 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-yank-cur-msg): Run only if mh-show-buffer
actually exists (otherwise a back-traceable error occurred).
* mh-utils.el (mh-find-progs): Run PATH search only when mh-progs,
mh-lib and mh-lib-progs are not all already set. This allows the
user to set them using a simple setq prior to loading mh-e. This
is useful for implementation of mh-e on win32. Note that many
commands still call mh-find-path which also parses the mh_profile
file (that may still fail on win32), so this is still done often.
But it lets us change the mh_profile file and have mh-e see the
changed file without exiting emacs and starting over so I left
that in.
2002-07-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-show): Fixed a bug in mh-index-show which
caused it to lose track of point when called from show buffer.
2002-07-04 Mark D. Baushke <mdb@gnu.org>
* Makefile: Add more information and common methods to allow both
GNU make and Berkeley make to properly build everything.
2002-07-04 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-push-button): Bug fix for mime display with
mouse. Select show window before executing the mime display
functions.
2002-07-01 Mark D. Baushke <mdb@gnu.org>
* Makefile: Use a conditional variable assignment operator rather
than ifndef to let Makefile be used by both GNU make and Berkeley
make (or similar versions of make). This does not help Solaris
/usr/ccs/bin/make, but Solaris make has problems with the ifndef
syntax too.
2002-07-01 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-search): Check for mh-decode-mime before
adding mh-mime-cleanup to kill-buffer-hook.
* mh-mime.el (mm-destroy-parts): Add definition for old emacs.
2002-06-30 Mark D Baushke <mdb@gnu.org>
* mh-utils.el (mh-update-scan-format): Add documentation string.
(mh-scan-msg-format-regexp): Update the regexp to find %(msg).
(mh-set-cmd-note): When mh-scan-format-file is not t, dynamic
update of mh-cmd-note is wrong. Do not assume that
mh-scan-format-nmh and mh-scan-format-mh can be kept in lock-step
with mh-cmd-note via mh-set-cmd-note. The mh-scan-format function
is now where the updated mh-cmd-note value is put into the scan
format.
* mh-e.el (mh-generate-new-cmd-note): Add documentation string.
(mh-scan-format): Use mh-update-scan-format to get updated copies
of mh-scan-format-nmh and mh-scan-format-mh to avoid format skew.
(mh-get-new-mail): Do not try to adapt mh-cmd-note unless
mh-scan-format-file is equal to t.
(mh-scan-format-nmh): No longer buffer local.
(mh-scan-format-mh): No longer buffer local.
2002-06-30 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-max-msg-index): New variable to keep track
of max message index among search results. If mh-adaptive-cmd-note
is non-nil this is used to compute the width of the index field.
(mh-index-search): Keep track of max index seen while parsing the
search results and set it if mh-adaptive-cmd-note is non-nil.
(mh-index-find-max-width): New function to find the required width
of the message index field.
(mh-defun-index): Binding buffer local variables is bad, so don't
do that.
(mh-index-show): New argument display-headers-p decides whether
the message is displayed in raw form or not.
(mh-index-header-display): New interactive function bound to ","
which shows the message in raw form.
(mh-index-keymap): Add appropriate bindings for backtab and ",".
(read-from-string): Add ignore-errors around it so that the code
doesn't die when it gets unexpected input.
2002-06-29 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-count-windows): This function works around the
lack of the window-list builtin function in emacs20.
2002-06-29 Mark D Baushke <mdb@gnu.org>
* mh-utils.el (mh-message-number-width): New function to scan
the last message of a folder and return its width.
(mh-adaptive-cmd-note): New variable, if Non-nil indicates that
mh-set-cmd-note should be called with the message width for the
folder.
(mh-cmd-note): Update documentation.
(mh-update-scan-format): Helper function for updating the
mh-scan-format-nmh and mh-scan-format-mh variables.
(mh-scan-msg-overflow-regexp): New variable to help find problem
messages after an inc.
(mh-scan-msg-format-regexp): New variable to find the old message
width in one of the mh-scan-format-nmh or mh-scan-format-mh
variables.
(mh-set-default-cmd-note): Replaced by mh-set-cmd-note.
(mh-set-cmd-note): New function to replace update mh-cmd-note
value.
* mh-e.el (mh-regenerate-headers): If mh-adaptive-cmd-note is
non-nil, use mh-set-cmd-note on empty folder buffers.
(mh-make-folder): Ditto.
(mh-generate-new-cmd-note): New function to adapt the mh-cmd-note
to fit when mh-get-new-mail gets message number truncation.
(mh-get-new-mail): Maybe use mh-generate-new-cmd-note if
mh-adaptive-cmd-note is Non-nil.
2002-06-29 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el (mh-speed-view): The display gets confused if the
cursor is in the show buffer when mh-speed-view is called. This is
a fix for that.
2002-06-27 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-next-undeleted-msg): Get rid of optional arg
reverse-p. If there are no more undeleted messages the the point
remains at its original position and a message is produced (closes
SF #494304).
(mh-previous-undeleted-msg): Change similar to
mh-next-undeleted-msg.
(mh-next-msg, mh-refile-msg, mh-delete-msg): Backout previous
change.
(mh-folder-map): Bind "S-tab" and "K S-tab" to mh-prev-button.
* mh-utils.el (mh-show-mode-map): Bind "S-tab" and "K S-tab" to
mh-letter-prev-button.
* mh-mime.el (gnus-newsgroup-name): Initialize it to nil, so that
mm-uu-dissect doesn't cause error.
2002-06-27 Mark D Baushke <mdb@gnu.org>
* mh-utils.el (mh-cmd-note): Make buffer-local. Changes to this
variable should be made via the new mh-set-default-cmd-note
function.
(mh-set-default-cmd-note): New function to setq-default the
mh-cmd-note, mh-scan-format-mh and mh-scan-format-nmh values to
related values.
* mh-e.el (mh-scan-format-mh): Make buffer-local.
(mh-scan-format-nmh): Ditto.
(mh-scan-good-msg-regexp): Use a more general regular expression
so that the width of message numbers, mh-cmd-note, may vary.
(mh-scan-deleted-msg-regexp): Ditto.
(mh-scan-refiled-msg-regexp): Ditto.
(mh-scan-cur-msg-number-regexp): Ditto.
(mh-scan-cur-msg-regexp): Ditto.
(mh-scan-subject-regexp): Ditto.
2002-06-26 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-speed.el: Speedbar support code.
* Makefile: Add mh-speed.el to MH-E-SRC.
* mh-utils.el (mh-prompt-for-folder): Add speedbar hook if
speedbar is being used.
* mh-funcs.el (mh-kill-folder): Add speedbar hook if speedbar is
being used.
* mh-e.el (speedbar-autoloads): Autoload speedbar initialization
functions so that speedbar can find them.
2002-06-25 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-grep-execute-search, mh-grep-next-result): Allow
grep to be used to search mail.
(mh-index-font-lock-keywords): Modified to avoid bug when using
lazy font-lock.
* mh-e.el (mh-delete-msg, mh-refile-msg): Modify so that if no
undeleted (or unrefiled) message exists in the current movement
direction then try to find an undeleted (or unrefiled) message in
the opposite direction instead.
(mh-next-undeleted-msg): Added a new optional argument. If non-nil
search for undeleted message backwards if none exists in the
forward direction.
(mh-previous-undeleted-msg): Added an optional argument. If
non-nil search for undeleted message in the forward direction if
none exists in the backward direction.
(mh-next-msg): Optional argument to change direction if undeleted
messages are not found in the current direction.
* mh-index.el (mh-cmd-note): Use mh-cmd-note instead of hardcoding
the index field size to 4.
* mh-utils.el (mh-show-addr, mh-show-xface): New functions added
to do xface display and goto-addr interface to allow reuse by the
mime display code.
(mh-show-mode): Use mh-show-addr and mh-show-xface. Only add
mh-mime-cleanup to kill-buffer-hook if mime decoding is enabled.
(mh-modify): Use mh-letter-mode instead of mh-show-mode when
editing messages.
* mh-mime.el (mh-mm-inline-message): Arrange for xface and
highlighting to work in forwarded messages.
2002-06-23 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-yank-from-start-of-msg): Add 'attribution' option
to add an attribution line in mh-yank-cur-msg.
(mh-extract-from-attribution-verb): Verb to use for attribution
when a message is yanked by mh-yank-cur-msg. Provides a method
for setting a different language.
(mh-yank-cur-msg): Add support for 'attribution' option.
(mh-extract-from-attribution): Function to get the attribution
line, or the sender from the From: line in the current show buffer.
2002-06-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-show): mh-display-msg was not being called
in the show buffer. This causes weird results on some mime messages.
* mh-mime.el (gnus-newsgroup-charset): Defvar to avoid error in
pgp messages if gnus hasn't been used yet.
* mh-comp.el (mh-letter-mode-map): Typo fix.
2002-06-19 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-mml-secure-message-encrypt-pgpmime): Typo fix.
(compiler-warnings): Add autoloads to remove compiler warnings.
* mh-index.el (autoload-fixes): Fix autoload forms.
2002-06-18 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-letter-mode-map): Change binding of "\C-c\C-ma"
to mh-compose-insertion. Remove duplicate binding for "C-c\C-mf".
(compiler-warnings): Add defvar to remove compiler-warning.
2002-06-18 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-menu): Conditionalize GPG function on
mh-gnus-pgp-support-p.
* mh-mime.el (mh-mml-forward-message): s/subseq/substring/.
(mh-compose-forward): cut&paste typo: s/messages/message/.
(mml-minibuffer-read-file): autoload added.
(mml-minibuffer-read-description): autoload added.
(mml-insert-empty-tag): autoload added.
(mh-mml-secure-message-sign-pgpmime): Check mh-gnus-pgp-support-p.
(mh-mml-secure-message-encrypt-pgpmime): Check mh-gnus-pgp-support-p.
2002-06-17 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-show-use-xface): Check for availability of
`uncompface' executable on system.
* mh-mime.el (mh-compose-forward): New front end for both
mh-mml-forward-message and mh-mhn-compose-forw.
(mh-compose-insertion): New front end for both mh-mml-attach-file
and mh-mhn-compose-insertion.
(mh-mml-to-mime): New function. Compose mime message from mml
directives.
(mh-mml-forward-message): New function. Forward a message as
attachment.
(mh-mml-attach-file): New function. Attach a file to the outgoing
MIME message.
(mh-mml-compose-insert-p): New variable. Buffer-local variable to
know whether MIME insertion was done. Triggers an automatic call
to `mh-mml-to-mime' in `mh-send-letter'.
(mh-mml-secure-message-sign-pgpmime): New function.
Front end to mml-secure-message-sign-pgpmime.
(mh-mml-secure-message-encrypt-pgpmime): New function.
Front end to mml-secure-message-encrypt-pgpmime.
* mh-comp.el (mh-send-letter): automatic call to `mh-mml-to-mime'
if mh-mml-compose-insert-p is set.
(mh-letter-mode-map): Add keys for new mh-mime functions above.
* mh-comp.el: Added autoloads for new mh-mime functions above.
2002-06-17 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-show-use-xface): new defcustom to determine
whether to call external package x-face to display the x-face.
(mh-invisible-headers-show-xface): variable now defaults to value
of mh-show-use-xface.
(mh-show-mode): When mh-show-use-xface is t, invoke
external package x-face to display the x-face.
2002-06-15 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-prev-button): New interactive function which moves
point to the previous mime button in the show buffer.
(mh-folder-mode-map): Bind M-TAB and K M-TAB to mh-prev-button.
* mh-utils.el (mh-show-mode-map): Bind M-TAB and K M-TAB to call
mh-letter-prev-button (which is analogous to mh-prev-button).
(mh-gnus-pgp-support-p): New global variable to replace the
variable mh-recent-gnus-p. The name better describes what it is
used for.
* mh-mime.el (mh-mime-display-part, mh-mime-display-single): Use
mh-gnus-pgp-support-p instead of mh-recent-gnus-p.
2002-06-12 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-display-buttons-for-inline-parts): New
customizable variable. When non-nil inline parts have are
displayed with a button (that is initially expanded).
(mh-maybe-insert-newline): The function has been removed.
(mh-mime-display-single): Add code to display buttons for inline
parts. Reduce the insertion of extra newlines between inline parts
and also for pgp signature parts.
(mh-mm-display-part): The function has been rewritten and cleaned
up. There was a bug which could change the show buffer if the user
pressed C-g while a mime part was being displayed has been fixed.
(mh-press-button, mh-push-button): Use unwind-protect to make sure
that set-buffer-modified-p is always called after mime display.
(mh-mime-inline-part): The behavior of the function has been
changed so that it toggles the display of the raw bytes.
(mh-mime-display-security): Remove the display of too many
newlines.
(documentation): Remove most check-doc warnings.
* mh-comp.el (mh-filter-out-non-text): Updated since whitespace
added around mime buttons have changed.
2002-06-10 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-index.el (mh-index-last-search, mh-index-search): The default
prompt in mh-index-search has been removed since currently there
is no good way of reading "+" with mh-prompt-for-folder.
(mh-index-folder-mode, mh-index-show-mode): New major modes
derived from mh-folder-mode and mh-show-mode respectively. They
use a restricted keymap compared to the parent modes.
(mh-index-folder-face): New customizable face to display folder
names in the index buffer.
(documentation): Change two spaces after period back to one.
2002-06-08 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-folder-toggle-mime-part): New interactive function
to control mime display from folder buffer.
(mh-folder-inline-mime-part): New interactive function to inline
raw mime part from folder buffer.
(mh-folder-save-mime-part): New interactive function to save mime
part from folder buffer.
(mh-folder-mode-map): Add keybindings for "K v", "K o", "K i" and
"K \t" to mh-folder-mode-map.
(mh-goto-next-button): Modified to allow searching for next button
that satisfies some condition.
(mh-folder-mime-action): Support function for
mh-folder-save-mime-part, mh-folder-inline-mime-part and
mh-folder-toggle-mime-part.
* mh-utils.el (mh-show-mode-map): Modify keymap to add appropriate
bindings for "K v", "K o", "K i" and "K \t".
* mh-index.el (documentation): Fix docs according to checkdoc
format.
2002-06-07 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el, mh-funcs.el (Compiler): Remove (require 'view) and
instead add defvar for view-exit-action.
2002-06-06 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (mh-insert-x-face): If transient-mark-mode is enabled
the call to mark returns error. So avoid using mark.
* mh-index.el: Support for new interactive function
mh-index-search.
* mh-e.el (mh-next-button, mh-goto-next-button): Refactor
mh-next-button so that the code may be reused by mh-index.el.
(mh-folder-map): Add key "F i" to call mh-index-search.
* mh-utils.el (mh-recent-gnus-p): Fix documentation.
(mh-msg-folder, mh-display-msg): The new function mh-msg-folder
maps a MH folder name to the buffer displaying it. In normal
operation the two names are identical but they are different in a
folder buffer generated by index search. Minor modification to
mh-display-msg to use mh-msg-folder to enable mh-index-search to
reuse code.
(mh-show-mode-map): Add key "F i" to call mh-index-search.
* Makefile: Add mh-index.el
2002-06-05 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-message-menu): Add an entry for mh-modify.
2002-05-31 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-decode-quoted-printable): Only decode if the
whole message is encoded. So restrict the search for the
content-transfer-encoding header to the headers of the message
itself.
* mh-mime.el (mh-mime-display-alternative): Make sure that point
is moved after mm-display-part is called.
2002-05-29 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (mh-mime-display-single): Fix the logic that
determines when an attachment is buttonized. For inline parts that
can't be displayed a button is now created.
2002-05-29 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-regenerate-headers): Fix an error in which the
mh-mode-line-annotation was not being set properly.
* mh-mime.el, mh-utils.el (compilation): Macros mh-require and
mh-autoload are used to make sure that emacs20 doesn't croak when
it tries to load non-existent mm-* files.
(mh-decode-mime): Make it default to nil for Emacs major version
below 21.
2002-05-28 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-e.el (mh-regenerate-headers): Generalize the function to
handle multiple ranges.
2002-05-25 Satyaki Das <satyaki@theforce.stanford.edu>
* compilation: Reduce use of eval-when-compile so that load-path
is not changed if lisp files are loaded without compilation. Small
changes were made to Makefile, mh-comp.el mh-e.el, mh-funcs.el,
mh-seq.el, mh-utils.el
* mh-e.el (mh-next-button, mh-folder-mode-map): New interactive
function to advance point to next MIME button. It is bound to TAB.
* mh-utils.el (mh-letter-next-button, mh-show-mode-map): New
interactive function mh-letter-next-button has been added to
advance point to the next MIME button. It is bound to TAB.
* mh-mime.el (comments): Added some comments.
2002-05-24 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-mime.el (compilation): Replace (eval-when-compile ...) by
(eval-when (compile) ...) to remove a bug when mh-e is loaded
without compilation.
2002-05-23 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-comp.el (compilation): Some code was rearranged to avoid
compiler warnings.
* mh-e.el (compilation): Code rearrangement and extra autoloads to
remove compiler warnings
(mh-quit): Add call to mh-destroy-postponed-handles to remove
handles that are associated with external viewers. Also fixed a
bug that I accidentally introduced by adding an extra line when
cut and pasting my changes.
* mh-func.el (compilation): Code rearrangement to remove compiler
warnings.
* mh-mime.el (compilation): Code rearrangement to remove compiler
warnings.
(mh-defun-compat): New macro to define to useful functions that
aren't present present in old Gnus.
(mh-destroy-postponed-handles): New function to cleanup handles
that are associated with external viewers.
(mh-handle-set-external-undisplayer): New function to replace
mm-handle-set-external-undisplayer. It associates handles for
external viewers with the folder buffer. These are released when
the user quits the folder.
(mh-mime-display, mh-press-button, mh-push-button): Hook in
mh-handle-set-external-undisplayer.
(mh-maybe-insert-newline): New function to avoid inserting too
many newlines between mime parts.
(mh-mm-display-part): Workaround for Gnus bug which causes new
lines to be inserted when images are shown inline.
(mh-mime-display-security): Cut down on newlines inserted.
* mh-pick.el (compilation): Code rearrangement to remove compiler
warnings.
* mh-seq.el (compilation): Code rearrangement to remove compiler
warnings.
(comments): Remove @SD from comments.
* mh-utils.el (compilation): Slight code rearrangement.
(mh-defun-show-buffer): Fix documentation so that the first line
is not too long as was the case earlier. Use
mh-previous-window-config to remember where the cursor should
return functions like mh-reply.
(mh-display-msg): Initialize handles data-structure for the folder
buffer so that postponed handles can be added to it.
(mh-add-msgs-to-seq): Always keep messages in the sequences
sorted. This removes some unexpected behavior when working with
sequences that go out of sync with the corresponding MH sequences.
(mh-canonicalize-sequence): New function to sort and remove
duplicates from mh-e sequence.
2002-05-21 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (require): Load mm-decode.el here so that
mm-inline-media-tests is properly initialized.
* mh-comp.el (mh-yank-cur-msg): Don't try to remove the displayed
mime parts when yanking the message. This also fixes the problem
of regions not being respected during the yank.
2002-05-20 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (compiler-warnings): Some code was rearranged to
remove all compiler warnings.
(mh-decode-mime): New defcustom to control whether
mime attachments are shown using Gnus.
(mh-globals-hash): New global variable which maps a given buffer
to the corresponding mime data structures.
(mh-recent-gnus-p): New global variable which checks if Gnus is
recent enough so that PGP/GPG encrypted messages can be handled.
(mh-mm-inline-media-tests): Tests to determine whether a mime part
can be shown inline.
(mh-gnus-article-highlight-citation): Shadow the Gnus function,
gnus-article-add-button before gnus-article-highlight-citation is
called. This prevents the insertion of useless buttons in the
message.
(mh-show-mode): Don't set font-lock-support-mode to nil. Modify
kill-buffer-hook to call mh-mime-cleanup.
(mh-modify): Only the edit buffer is shown.
(mh-display-msg): Add call to mh-mime-display, mh-display-smileys,
mh-display-emphasis when mh-decode-mime is non-nil.
* mh-mime.el (mh-buffer-data): New structure to keep track of
per-buffer mime information.
(compiler-warnings): Some code was rearranged to get rid of all
compiler warnings.
(mh-graphical-smileys-p): New defcustom which controls whether
graphical smileys are shown.
(mh-graphical-emphasis-p): New defcustom for graphical emphasis.
(mh-max-inline-image-width, mh-max-inline-image-height): New
defcustoms for inlining image.
(gnus-local-map-property, mm-merge-handles): Copy utility
functions for use with version of Gnus that ships with Emacs21.1.
(mh-mime-cleanup): New function to free mime data-structures.
(mh-add-missing-mime-version-header): New function to add missing
Mime-Version header if a Content-Type header exists.
(mh-display-smileys): New function to show graphical smileys.
(mh-display-emphasis): New function to show graphical emphasis.
(new-globals): New variables mh-mime-button-* and
mh-mime-security-* were added to control mime buttons.
(mh-mime-display): New function to display mime messages. The
functions mh-mime-display-part, mh-mime-display-alternative,
mh-mime-display-mixed, mh-mime-part-index, mh-small-image-p,
mh-mime-display-single, mh-insert-mime-button, mh-mm-display-part,
mh-press-button, mh-push-button, mh-mime-save-part,
mh-mime-inline-part, mh-widget-press-button, mh-mm-inline-message,
mh-mime-display-security, mh-mime-security-show-details,
mh-mime-security-press-button and mh-insert-mime-security-button
were added to support mh-mime-display.
* mh-e.el (mh-header-display): Bind mh-decode-mime to nil when
mh-show-msg is called, so that mime isn't decoded when headers are
displayed.
(mh-quit): The show buffer is killed instead of invalidating and
burying it.
* mh-comp.el (mh-yank-cur-msg): Filter out the mime buttons from
the yanked message.
(mh-filter-out-non-text): New function to filter out attachments
from message being yanked.
2002-05-20 Bill Wohler <Bill.Wohler@openwave.com>
* mh-utils.el (mh-invisible-headers-show-xface): First sentence of
docstring was not entirely on first line so was truncated in
customize and help buffers. Reworded so first sentence could fit
within 80 columns per checkdoc recommendation.
(mh-defun-show-buffer): Reworded per checkdoc recommendations.
Removed @SD while I was in there.
2002-05-18 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-seq.el (mh-narrow-to-seq): This function now removes the
current message notation in the folder. Otherwise, two current
message notations may be present after mh-widen is called. Also
mh-copy-seq-to-eob is called instead of mh-copy-seq-to-point since
the latter has a bug.
(mh-copy-seq-to-point): This function has a tricky problem. It
calls mh-map-to-seq-msgs which uses mh-goto-msg. mh-goto-msg
assumes that the folder is sorted (since it uses binary
search). The assumption isn't true, so it may not copy all the
messages. Since this function is not used any more it has been
removed.
(mh-copy-seq-to-eob): This function is a specialized (and
hopefully correct) replacement for mh-copy-seq-to-point.
2002-05-17 Satyaki Das <satyaki@theforce.stanford.edu>
* mh-utils.el (mh-gnus-article-highlight-citation): Workaround for
problem caused by low value of recursive-load-depth-limit in
Emacs21.1 and CVS version of Gnus.
(mh-show-mode-map): New keymap variable to facilitate use of
summary commands from the show buffer.
(mh-show-folder-buffer): New local variable which keeps track of
the folder-buffer corresponding to the message being shown.
(mh-defun-show-buffer): New macro to convert interactive functions
callable in the summary buffer to interactive functions callable
in the show buffer.
(mh-show-mode): Make buffer read-only and use mh-show-mode-map as
keymap (closes SF #527946).
(mh-modify): New interactive function to edit a message in-place.
* mh-e.el (mh-goto-cur-msg): Add an optional argument,
minimal-changes-p. If non-nil, the function will just change
the point to current message and do not change folder display.
(mh-folder-mode-map): Make "M" call mh-modify.
2002-05-07 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-invisible-headers-show-xface): New defcustom
variable. If non-nil, the X-Face header line will be excluded from
the variable `mh-invisible-headers'. Set this when using a
package such as x-face-el to display X-Face icons in mh-show-mode.
This variable's setting will eventually be set automatically when
mh-e does its own X-Face decoding (or this variable will be replaced
by one telling mh-e to decode the X-Face). We may not ship the
next release with this variable.
2002-05-07 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-x-face-file): New defcustom variable. File name
containing the encoded X-Face string to insert in outgoing mail.
(mh-insert-x-face): New function. Appends an X-Face field to the
header, but only if it doesn't already exist and if 'mh-x-face-file'
is non-nil and points to an existing file.
(mh-send-letter): Invoke mh-insert-x-face.
2002-04-29 Mike Kupfer <m.kupfer@acm.org>
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo): Check
whether XEmacs region is actually active (needed at least for 21.1).
[Patch committed by psg]
2002-04-29 Mike Kupfer <m.kupfer@acm.org>
* mh-utils.el (mh-prompt-for-folder): Remove "default" argument
from completing-read as XEmacs-21.1 doesn't have it (21.4 does
however) and using the argument adds no functionality.
[Patch committed by psg]
2002-04-11 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo): Add support for
XEmacs to act on selected region when active.
2002-04-10 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo): XEmacs fix; Add
check to see if mark-active is bound, because Mandrake Linux include
XEmacs initialization code that binds transient-mark-mode. This
fix gets around a problem in Mandrake only. It wasn't a problem
on XEmacs generally. Fixes SF #541915.
2002-04-08 Bill Wohler <wohler@newt.com>
Released mh-e version 6.1.
* mh-e.el (mh-folder-unseen-seq-name): Use "mhparam -component
Unseen-Sequence" command and "Unseen-Sequence: \\(.*\\)$" regexp
to increase robustness.
(mh-folder-unseen-seq-list): Use `expand-file-name' as
`mh-expand-file-name' isn't needed and the former saves function
call.
(Version, mh-version): Updated for release 6.1.
2002-04-08 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-unseen-seq-list): Specify mh-progs path in
call to mark command. Fixes a bug in which unseen messages
weren't highlighted if "mark" wasn't in the path.
2002-04-07 Bill Wohler <wohler@newt.com>
* MH-E-NEWS: Updated for release 6.1.
* README: Updated for release 6.1. Updated verbiage about reading
MH-E-NEWS.
* mh-comp.el, mh-e.el, mh-funcs.el, mh-mime.el, mh-seq.el,
mh-utils.el, mh-xemacs-compat.el: Updated copyright in files
modified this year.
* mh-xemacs-compat.el: Put Author field back in, but set to FSF.
* mh-comp.el, mh-funcs.el, mh-mime.el, mh-seq.el,
mh-utils.el: Fixed all checkdoc errors, except for no
documentation, and documentation in comments. Also removed the-
prefix from certain local variables.
* mh-e.el: Fixed all checkdoc errors, except for no documentation,
and documentation in comments. Also removed the- prefix from
certain local variables.
(mh-folder-unseen-seq-name): Refactored to make default sequence
name more explicit and to handle undefined Unseen-Sequence MH
profile entry better.
2002-04-02 Peter S Galbraith <psg@debian.org>
* mh-e.el: 'defvar mh-folder-unseen-seq-name' called a function to
set it's value, and this happens also on byte-compilation (where
it can fail if the user's MH environment is not setup correctly).
I now set the value of mh-folder-unseen-seq-name at runtime when I
first need it. This should fix Debian bugs
http://bugs.debian.org/140232 and http://bugs.debian.org/140817
2002-03-25 Peter S Galbraith <psg@debian.org>
* mh-utils.el: remove "(require 'mh-e)" since mh-utils.el should
be at the bottom of the dependency tree.
* mh-e.el (mh-folder-unseen-seq-name): Make sure mh-progs is set
and use it as path to mhparam command in call-process.
2002-01-23 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-font-lock-keywords): Add call to
mh-folder-font-lock-unseen to fontify unseen messages in bold.
(mh-folder-unseen-seq-name): Provide name of unseen sequence from
mhparam. Used as default for variable of same name.
(mh-folder-unseen-seq-list): Returns a list of unseen messages
numbers for current folder.
(mh-folder-unseen-seq-cache): Cache variable to hold list of
unseen message numbers while font-lock iterates. This variable is
buffer-local.
(mh-folder-font-lock-unseen): Returns unseen message lines to
font-lock one by one.
2002-01-15 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-prefix-string): Wrap a
"(let ((zmacs-regions nil))" around (mark) so it works in XEmacs.
Bug reported and fix suggested by Will Partain <partain@dcs.gla.ac.uk>
Indeed, this is how it appears in XEmacs-21's mh-comp.el.
2001-12-16 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-forward): Move the assignment to `fwd-msg-file'
to before the assignment to `draft' as the later changes buffers
and invalidates `mh-seq-list' (which is used in a function called
by (mh-seq-to-msgs)). Resolves SF #489448.
* mh-utils.el: Add defcustoms for `mh-temp-folders-buffer' and
`mh-temp-sequences-buffer'.
* mh-e.el (mh-quit): If they exist, kill 'mh-temp-buffer,
'mh-temp-folders-buffer and 'mh-temp-sequences-buffer when
quitting.
* mh-funcs.el (mh-list-folders): Use `mh-temp-folders-buffer'
(a defcustom initialized to "*Folders*") for folder listing. Put
into view mode and set it up to kill the buffer when exiting view
mode.
* mh-seq.el (mh-list-sequences): Use `mh-temp-sequences-buffer'
(a defcustom initialized to "*Sequences") for sequences listing.
Put into view mode and set it up to kill the buffer when exiting
view mode.
2001-12-16 Bill Wohler <wohler@newt.com>
Released mh-e version 6.0.
* MH-E-NEWS: Be a little more specific about incompatible changes.
Added info about outdated manual.
Removed variables in mh-scan regexp table that did not exist in
5.0.2.
Added helpful documentation about finding relevant variables
containing regexps to mh-scan-format-file's description.
* mh-e.el (mh-scan-format-file): Added information about getting a
list of regexp variables that you'll need to change if you
customize your scan's output.
(mh-folder-mode): Added documentation about `mh-scan-format-file'
for those users who modify their scan formats.
* README: New file. Describes packages and provides simple
installation instructions.
* Makefile (clean, dist, install-emacs): Replaced $(RM) with rm
-rf (closes SF #488661).
2001-12-14 Bill Wohler <wohler@newt.com>
Released mh-e version 5.0.93.
* Makefile (MH-E-SRC): Added mh-xemacs-compat.el.
(MH-E-IMG): Added .pbm images for all. Removed mail_ prefix from
all.
(MH-E-IMG2): New variable to hold images in mail sub-directory.
(dist): Updated target to make mail sub-directory and copy
MH-E-IMG2 images there.
* mh-xemacs-compat.el: Modified docs per GNU coding conventions.
* mh-e.el: Reorganized variables having to do with the scan line.
Moved some random variables that were interspersed out of the
middle. Moved `mh-scan-format-file' first and let the variables
flow from there.
As the number of variables increases, it is becoming important to
organize the mh-e namespace. Several variables having to do with
the format of scan lines were renamed, as follows:
(mh-good-msg-regexp): Renamed to mh-scan-good-msg-regexp.
(mh-deleted-msg-regexp): Renamed to mh-scan-deleted-msg-regexp.
(mh-refiled-msg-regexp): Renamed to mh-scan-refiled-msg-regexp.
(mh-valid-scan-line): Renamed to mh-scan-valid-regexp.
(mh-cur-msg-number-regexp): Renamed to mh-scan-cur-msg-number-regexp.
(mh-cur-msg-line-regexp): Renamed to mh-scan-cur-msg-regexp.
(mh-scan-rcpt-addr-regexp): Renamed to mh-scan-rcpt-regexp.
(mh-scan.font-lock-regexp): Renamed to mh-scan-format-regexp.
(mh-folder-scan-font-lock-face): Renamed to
mh-folder-scan-format-face.
(mh-folder-cur-msg-line-face): Renamed to mh-folder-cur-msg-face).
2001-12-13 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-msg-number-regexp): Renamed to
mh-scan-msg-number-regexp.
(mh-msg-search-regexp): Renamed to mh-scan-msg-search-regexp.
* Corrected typos, quoted variables in doc strings, and made minor
wording changes in docs.
2001-12-13 Peter S Galbraith <psg@debian.org>
* mh-xemacs-compat.el: defalias 'match-string-no-properties to
'match-string for XEmacs. I've seen a better function for this
that actually removes text properties, but this will do for now.
* mh-utils.el (mh-decode-quoted-printable): deactivate-mark not
bound in XEmacs.
* mh-xemacs-compat.el: GNU Emacs Functions needed by XEmacs.
New file.
* mh-e.el: (require 'mh-xemacs-compat) when running XEmacs.
2001-12-12 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-send-letter): function local-variable-p needs two
arguments in XEmacs.
(mh-send-letter): sendmail-coding-system not bound in XEmacs.
(mh-send-letter): default-buffer-file-coding-system not bound in
Xemacs.
* mh-e.el (mh-delete-msg, mh-refile-msg, mh-undo):
transient-mark-mode not bound in XEmacs. The feature of
operations made on all messages in the selected range when
transient-mark-mode is on doesn't work in XEmacs.
* mh-e.el, mh-utils.el: Conditionalize calls to
'add-to-list 'facemenu-unlisted-faces for XEmacs.
2001-12-11 Jeffrey C Honig <jch@honig.net>
* mh-e.el (mh-scan-format): Add `mh-scan-format-file' variable to
specify the scan format string or file to use. Define formats for
MH and nmh that are compatible with the standard format, but
provide hints for font-lock. Define (mh-scan-format) for use by
(mh-regenerate-headers) and (mh-get-new-mail) to specify the args
necessary to inform the scan program which scan format string or
file to use.
2001-12-07 Peter S Galbraith <psg@debian.org>
* mh-e.el (scan.font-lock): New format file documented in comments.
(mh-scan.font-lock-regexp): Adapted to new format.
(mh-folder-font-lock-keywords): Use new format.
* mh-e.el (page-down.xpm): Icon renamed from nextpage.
* mh-utils.el (mh-decode-quoted-printable): Bug fix. Better check
on what actually is a quoted-printable attachment.
2001-12-06 Eric Ding <ericding@alum.mit.edu>
* mh-mime.el (mh-mhn-compose-insertion, mh-mhn-compose-anon-ftp):
require mailcap.el here rather than using autoload at top of
mh-mime.
(mh-file-mime-type): get rid of unused variables (why were they
there to begin with?)
2001-12-06 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-cur-msg-number-regexp, mh-cur-msg-line-regexp):
mh-cur-scan-msg-regexp splits into these two variables.
The whole-line fontification is disabled, but easily restored by a
user (although it could be a defcustom with choices DISABLED or
the correct regexp?)
(mh-folder-cur-msg-line-face): mh-folder-current-msg-face renamed
to this.
(mh-folder-cur-msg-number-face): mh-folder-current-face renamed to
this.
* cabinet.xpm: Revert to rescan icon name.
* mh-e.el (mh-folder-tool-bar-map): s/cabinet/rescan/
* mh-e.el (mh-folder-font-lock-keywords): Reorder and tweak such
that current message line highlight doesn't mess up other highlights.
2001-12-05 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el (mh-show-from-face): Change mh-show-from-face to
cyan on dark backgrounds; through a series of changes, it had
become the same color as mh-show-subject-face!
2001-12-05 Bill Wohler <Bill.Wohler@openwave.com>
* mh-e.el, mh-utils.el: Fixed typos in face definitions, and made
a couple of small doc string tweaks while I was in there. Peter,
if you don't agree, let me know and I'll back them out. I thought
the "mh-e" in the text was redundant since the variables start
with "mh"; I was also thinking ahead to how the documentation may
read.
2001-12-05 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-cur-scan-msg-regexp): Match 0 is the whole line.
(mh-folder-current-msg-face): New face with only a background
settings, used in font-lock for the current message.
(mh-folder-font-lock-keywords): Use mh-folder-current-msg-face for
mh-cur-scan-msg-regexp.
* mh-utils.el (mh-show-from-face): Use red3 instead of red for
light backgrounds. It's not as bright on the eyes.
(mh-show-subject-face): copy from mh-folder-subject-face instead.
Makes the look consistent with folder-mode.
* mh-e.el (mh-folder-subject-face): Moved to mh-utils since we
need it to copy to mh-show-subject-face.
2001-12-05 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-folder-mode-map): Moved `mh-extract-rejected-mail'
from "a" to "E". Better mnemonic, nicer to folks used to using a
for `mh-reply'.
2001-12-04 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-folder-map): Added "S" for `mh-sort-folder'.
2001-12-04 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-subject-face et al.): Yet another attempt at
colours for folder-mode. Still themed, but fewer and darker
colours (Blame Eric this time!). I'll get to underlining tomorrow
night.
* mh-e.el (mh-folder-tool-bar-map): Renamed all icons so they
don't have the word mail in them. Also generated a pbm format of
each icon for users without XPM support conpiled into Emacs.
2001-12-04 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el (mh-show-font-lock-keywords): Use
mh-header-subject-font-lock instead of regexp for subject headers,
which may go multiple lines.
(mh-header-subject-font-lock): New function.
Fix typos (hightlight -> highlight).
2001-12-04 Eric Ding <ericding@alum.mit.edu>
* mh-e.el: changes to face colors on dark backgrounds.
(mh-folder-followup-face): change to LightGoldenRod.
(mh-folder-date-face): change to snow3.
(mh-folder-msg-number-face): change to snow4.
2001-12-04 Bill Wohler <wohler@newt.com>
Released mh-e version 5.0.92.
* mh-utils.el (gnus-cite-face-list)
(mh-gnus-article-highlight-citation): Don't autoload. Revert to
requiring in `mh-gnus-article-highlight-citation' as before. With
the autoloads, if you ran mh-e before gnus, you'd get an undefined
gnus variable when viewing an article in gnus. Go figure.
2001-12-03 Bill Wohler <wohler@newt.com>
Released mh-e version 5.0.91.
* MH-E-NEWS: Removed info about bumping up `max-specpdl-size' now
that workaround has been implemented.
* Makefile (MH-E-OBJ): New variable to hold .elc files.
(all): Just compile.
(clean): New target that blows away MH-E-OBJ.
(dist): Added $(MH-E-OBJ) to tarball.
Attempt to quiet compilation errors to a dull roar.
* mh-e.el: Require easymenu, added autoload of info.
(mh-smail, mh-smail-other-window): Comment says these were needed
by Emacs 18. Out!
* mh-utils.el: Don't require sendmail, but require mh-e.
Moved autoloads to top of file, and autoload gnus-cite and
sendmail too.
* mh-pick.el: Require easymenu. Remove cond on
`easy-menu-define'--it exists.
* mh-mime.el: Autoload mailcap.
* mh-comp.el: Require mh-e and easymenu, moved autoloads to top of
file.
* Makefile: (EMACS): New constant to hold emacs calling sequence.
(install): Renamed to install-emacs.
(compile): New target to compile all files.
(dist): Make dependent on compile.
(import): Renamed to import-emacs.
(%.elc): New implicit rule to compile elisp files.
* mh-e.el (mh-thread-map): Added "Td" for
mh-delete-subject-thread.
2001-12-03 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-tool-bar-map): Change tooltip for exec icon.
* mh-e.el (mh-folder-subject-face): Change to IndianRed1.
(mh-folder-followup-face): Change to IndianRed.
(mh-folder-deleted-face): Use sedate face instead of bright one.
2001-12-03 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-invisible-headers): Increase size of
`max-specpdl-size' locally to work around insufficient default.
(mh-invisible-headers): Added X-Info and X-VSMLoop (NTMail).
2001-12-03 Jeffrey C Honig <jch@honig.net>
* mh-utils.el (mh-find-progs): Searches should not stop if the
strings are not found, there is error detection at the end of the
routine (closes SF #488231).
2001-12-02 Bill Wohler <wohler@newt.com>
* MH-E-NEWS: Added info about bumping up `max-specpdl-size'.
* Makefile (MH-E-IMG): New variable that contains images used by
mh-e. Add these files to release.
* MH-E-NEWS: Second draft of mh-e 6.0 (was 5.1) release notes.
* mh-e.el (mh-folder-updated-hook): Reworded to avoid ambiguity.
Is the hook called when you type `d' or when you type `x'?
(mh-unseen-updated-hook): Reworded to be consistent with
`mh-folder-updated-hook.'
* mh-utils.el (mh-recenter): Accepted Gerd's change which is
evaluated at compile time.
2001-12-02 Bill Wohler <wohler@newt.com>
* mh-e.el Major, major keymap changes. The specific changes are
listed below, but view the sources, or use "C-h m" in MH Folder
mode for the complete list.
Use of sub-keymaps inspired by gnus. The changes tripped me up at
first too, but after about 5 minutes of shock (which is to be
expected, I've been using the old keybindings for 16 years), I
honestly found the new bindings to be nice indeed. It will also
provide flexibility to allow for future functionality. I hate to
do this on the eve of the beta release, but you asked for it! It's
likely I'll have to pull an Eric and back this change out, but if
we can live with pink subjects, this can't be so bad ;-).
Question: will the users revolt? If they do, I suppose we can
release 6.0.1 the next day ;-).
(mh-folder-map, mh-sequence-map, mh-extract-map, mh-digest-map):
New keymaps which start with F, S, X, and D, respectively. The
mhstore commands can go in the mh-extract-map eventually.
(mh-thread-map): Renamed from mh-folder-thread-map.
Keymap changes and rationale. The sub-keymaps allowed some
consistency (e.g., esp. with l(ist) and k(ill).
e Deleted. Already have x. Now used by mh-edit-again.
a Deleted. Already have r. Now used by mh-extract-rej..
j Deleted. Already have g.
M-a -> e Better mnemonic. Matches rmail. Frees movement cmd.
M-e -> a Try `a'gain!
M-f -> Fv Frees movement command
M-f -> Ff Alias (keep?)
M-f -> Fo Alias (keep?)
M-k -> Fk No reason but to keep with folder commands
M-l -> Fl No reason but to keep with folder commands
M-p -> Fp No reason but to keep with folder commands
M-r -> Fr Frees movement command
M-s -> Fs No reason but to keep with folder commands
M-u -> Fu No reason but to keep with folder commands
M-% -> Sd Better mnemonic
M-# -> Sk Better mnemonic
M-q -> Sl Better mnemonic
C-xn -> Sn Frees up standard key binding
% -> Sp Better mnemonic for putting a message in a sequence
? -> Ss Shows sequences that message is in
C-xw -> Sw Frees up standard key binding
M-n -> Xs Better mnemonic (shar)
M-n -> Xu Better mnemonic (uuencode)
M-SPC -> DSPC Frees mark command
M-\177 -> D\177 No reason but to keep with digest commands
M-b -> Db Frees movement command
2001-12-01 Bill Wohler <wohler@newt.com>
* mh-e.el: Use gnus style of keymaps. Now requires gnus-util.
(mh-folder-thread-map): New map, created by gnus-define-keys.
Reached when typing T in mh-folder-mode-map. Moved threading
functions to this new keymap so we can use dired again.
(mh-folder-mode-map): Defined by gnus-define-keys. Otherwise than
the new threading functions, no changes to the UI were made at
this point--saving that for the next check-in.
* mh-pick.el (mh-pick-mode-map): Use gnus-define-keys. Now
requires gnus-util.
* mh-comp.el (mh-letter-mode-map): Use gnus-define-keys. Now
requires gnus-util.
2001-12-01 Jeffrey C Honig <jch@honig.net>
* mh-e.el: Update the documentation for the regexps used by
`mh-folder-font-lock-keywords' to specify how many parethesized
expressions they are expected to have and what those expressions
are expected to match.
2001-12-01 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-folder-mode): Removed iteration of key bindings,
\\{mh-folder-mode-map} suffices. Removed variable documentation
also as this is already out of date and a maintenance hassle.
Reference new mh customization group instead.
* mh-comp.el (mh-letter-mode): Ditto. Also added new information
about MIME directives getting processed automatically if inserted
via mh-e commands.
* mh-pick.el (mh-pick-mode): Edited documentation so it reads like
the other modes.
* mh-e.el (mh-compat-quit): Deleted obsolete and unused function.
Comment in this function said that `b' shouldn't be used for
burst-digest, as it is used for `back' in info, less, and rn. But
what does `back' mean in MH Folder? I suppose if you visit a
folder, you would go `back' to the original folder. Hmmm, I guess
we'll leave the `b' binding alone for now.
* mh-utils.el: Moved some of the variable comments to the first
column so they wouldn't wrap in such an ugly fashion.
(mh-showing-mode): Renamed variable and function from mh-showing
to conform with minor mode conventions. Added optional arg to
function so it would behave like a normal minor mode: no or nil
arg toggles mode, 0 arg turns off, non-nil turns on. It also turns
out that desktop-create-buffer would barf when recreating mh-e
buffers because it was calling mh-show with an arg.
(mh-show-mode): Use define-derived-mode to simplify definition a
*lot*.
(mh-set-mode-name): Deprecated by use of define-derived-mode.
Removed.
* mh-pick.el (mh-pick-mode): Use define-derived-mode to simplify
definition a *lot*.
* mh-e.el (mh-scan-prog): Removed message about "Buffer local" as
this message will appear in a future version of Emacs.
(mh-inc-folder): mh-showing renamed to mh-show-mode and made a
real minor mode.
(mh-folder-mode): Use define-derived-mode to simplify definition a
*lot*.
* import-emacs (release): Change `(none)' to `mainline' so import
doesn't choke after running `cvs up -A' on Emacs.
(COPYING): Moved from $EMACS_HOME/etc to $EMACS_HOME.
(cvs update): Whoops! Forgot the second join (-jemacs).
make import works fine again.
2001-11-30 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-font-lock-keywords): Change order of
font-lock patterns such that subject body text doesn't get date
fontification.
* mh-e.el (mh-scan-subject-regexp): Bug fix. Remove a dot.
scan.font-lock users have to setq it separately.
2001-11-30 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el (mh-clean-msg-header): Go back to using
mh-delete-line. Using invisible text property is nicer in some
ways, but winds up with somewhat mysterious behavior should user
kill/yank stuff from the header (i.e., text gets yanked invisibly
and won't be seen by user until file is reloaded).
2001-11-29 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-page-msg): Use mh-next-direction to page in the
right direction.
2001-11-29 Jeffrey C Honig <jch@honig.net>
* mh-e.el (mh-scan-folder): Fix logic to not attempt to go to
the current message if there are no messages in the folder.
2001-11-29 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-font-lock-subject): New fontifier function
for subject lines in folder-mode
(mh-scan-followup-regexp): Deleted obsolete regexp. Use
mh-scan-subject-regexp instead.
(mh-folder-font-lock-keywords): Use mh-folder-font-lock-subject
instead of obsolete mh-scan-followup-regexp variable.
(mh-folder-date-face, mh-folder-msg-number-face):
(mh-folder-subject-face, mh-folder-followup-face):
Now defined as proper faces instead of copied from font-lock
faces.
* mh-mime.el (mh-media-type-regexp): New variable. Regexp matching
valid media types used in MIME attachment compositions.
(mh-file-mime-type): Use mh-media-type-regexp instead of
hard-wiring its value.
* mh-utils.el (mh-show-unquote-From): New function to unquote
"^>From" in mh-show-mode (not saved to disk).
(mh-show-mode): Call mh-show-unquote-From.
2001-11-29 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el (mh-clean-msg-header): Use mh-make-line-invisible
rather than mh-delete-line.
(mh-make-line-invisible): New function to make line(s) invisible
rather than deleting line(s). Optional argument specifies number
of lines to delete.
(mh-show-msg): screen-height has been deprecated; use no more.
(mh-notate): screen-width has been deprecated; use no more.
2001-11-29 Jeffrey C Honig <jch@honig.net>
* mh-utils.el: (mh-find-progs): Change mh-find-progs to rely on
the existence of mhparam. The location of mhparam is used to find
`mh-progs'. It uses the libdir and etcdir to find the
`mh-lib-progs' and `mh-lib' directories. If etcdir doesn't return
anything we assume `mh-lib-progs' is the same as `mh-lib' and that
we are using MH instead of nmh.
2001-11-29 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-scan.font-lock-regexp): Change docs to reflect that
second paren expression is the user match.
(mh-folder-font-lock-keywords): Change from 1st to 2nd parenthesized
expression to match user name, after Jeffrey's change to the regexps.
2001-11-29 Bill Wohler <Bill.Wohler@openwave.com>
* mh-utils.el (mh-clean-message-header): Default is now t.
(mh-invisible-headers): Padded out to contain all the headers that
the mh-e developers don't like to see (closes SF #415759).
2001-11-28 Bill Wohler <Bill.Wohler@openwave.com>
* mh-comp.el (mh-rejected-letter-start): Added MIME MDN. While
this allows mh-extract-rejected-mail to strip the start of the
MDN, there is still a closing MIME marker at the end. This should
be cleaned up eventually.
2001-11-28 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-seq-tool-bar-map): New tool-bar used for
folder-mode when narrowed to sequence.
* mh-seq.el (mh-narrow-to-seq): Set tool-bar to
mh-folder-seq-tool-bar-map.
(mh-widen): Set tool-bar to mh-folder-tool-bar-map.
* widen.xpm: New icon used in mh-folder-seq-tool-bar-map.
* mh-mime.el (mh-file-mime-type): Much better check on validity of
'file' output.
* mh-e.el (mh-scan-subject-regexp): New regexp variable for
subject string in folder mode. Used to extract subject sequence,
and will be used for font-lock soon.
* mh-seq.el (mh-subject-thread-to-sequence): More robust code by
using mh-scan-subject-regexp, allows users with non-standard
scan format to use subject sequences.
* mh-comp.el (mh-letter-fill-column): Fill column to use in
mh-letter-mode. (Yes, I'm doing this in spite of what Bill said;
Someone can always undo it later)
(mh-letter-mode): setq fill-column to mh-letter-fill-column.
2001-11-28 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-page-msg): The first time the end of page is hit,
set mh-page-to-next-msg-p to t. The second time the end of page is
hit, go to the next message.
* mh-utils.el: (mh-show-msg): Initialize mh-page-to-next-msg-p to
nil.
2001-11-27 Bill Wohler <wohler@newt.com>
* mh-mime.el (mh-mime-content-types): Updated list of types to
contain types used by mh-e developers, but not including types not
listed in
http://www.isi.edu/in-notes/iana/assignments/media-types/media-types.
2001-11-27 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-subject-thread-to-sequence) New function placing
all messages with similar subject line into a sequence named
'subject.
(mh-narrow-to-subject-thread): New command to narrow to all
messages with similar subject line into a sequence named 'subject.
(mh-toggle-subject-thread): New command to toggle between a new
'subject sequence or the wide view of a folder.
(mh-delete-subject-thread): New command to delete all following
messages with similar subject lines (leaving preceeding ones
untouched).
(mh-next-unseen-subject-thread): New command to create and move to
a new subject thread created from the next unseen message as a
starting point.
* mh-e.el (mh-folder-message-menu): New menu entries for subject
threads.
(mh-folder-mode-map): New keybindings for subject threads.
(mh-lessp): New function to sort messages.
* mh-utils.el (mh-show-font-lock-keywords): and various
faces... scoped within eval-after-load "font-lock" to avoid
requiring font-lock to use its faces.
* mh-e.el (mh-folder-font-lock-keywords): Same.
2001-11-27 Jeffrey C Honig <jch@honig.net>
* mh-mime.el (mh-file-mime-type): Use mh-temp-buffer instead of
" *mh-temp".
* mh-comp.el (mh-insert-x-mailer): Kill mh-temp-buffer after use.
2001-11-26 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el: revert to using external mimedecode to decode
MIME quoted-printable parts
2001-11-26 Jeffrey C Honig <jch@honig.net>
* mh-e.el (mh-process-commands): Added mh-folder-updated-hook.
* mh-e.el (mh-update-unseen): Added mh-unseen-updated-hook.
2001-11-26 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-file-mime-type): Make sure output from file
command is known to mailcap file, otherwise prompt the user.
(mh-mime-content-types): Add "image/png" type.
* mh-e.el (mh-folder-font-lock-keywords): Use a bunch of new
mh-folder-*-face faces.
* mh-utils.el (mh-show-font-lock-keywords): Use a bunch of new
mh-show-*-face faces.
* mh-utils.el (mh-letter-header-font-lock): Bug fix. Fix infinite
loop in emacs20 font-locking.
(mh-header-field-font-lock): Preventive fix with similar change.
* mh-comp.el (mh-reply-show-message-p): Typo. diplayed -> displayed.
* MH-E-NEWS: Same.
* mh-e.el (mh-folder-tool-bar-map): Bug fix. I had
mh-repack-folder instead of mh-pack-folder.
2001-11-26 Bill Wohler <wohler@phone.com>
* mh-e.el:
Updated header for consistency and to conform with (elisp)Library
Headers.
(mh-do-not-confirm): Updated documentation string to reflect
reality (e.g., is no longer used by mh-kill-folder and is used by
more functions than just mh-undo-folder).
(mh-page-msg): Now shows the next undeleted message if looking at the
bottom of the current message.
(mh-process-or-undo-commands): Fixed indentation.
* mh-mime.el:
(mh-mhn-compose-insertion, mh-mhn-compose-anon-ftp): If MIME type
cannot be determined with file command, use mailcap-mime-types (if
available) to provide list for completing read.
* MH-E-NEWS: First draft of mh-e 5.1 release notes.
2001-11-26 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el (mh-decode-quoted-printable): Implement
quoted-printable decoding in elisp (starting with code copied
from FLIM).
(mh-decode-quoted-printable-region): Move (require 'hexl) outside
while loop.
(mh-decode-quoted-printable): give user a choice between using
internal code or external program to decode quoted-printable
content. Resurrect code that calls external mimedecode program.
2001-11-25 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-highlight-citation-p): New variable to determine
whether to hightlight citations in message body with gnus,
font-lock or not at all.
(mh-show-font-lock-keywords): removed citations from keywords.
(mh-show-font-lock-keywords-with-cite): New variable, equivalent
to prior mh-show-font-lock-keywords.
(mh-gnus-article-highlight-citation): hook into gnus for
multi-level citation highlighting.
(mh-show-mode): Use either mh-show-font-lock-keywords or
mh-show-font-lock-keywords-with-cite, depending on value of
mh-highlight-citation-p, and possibly call
mh-gnus-article-highlight-citation.
* mh-comp.el (mh-letter-mode): Same as for mh-show-mode above.
2001-11-25 Jeffrey C Honig <jch@honig.net>
* mh-comp.el (mh-redistribute): Added mh-redist-background
variable to cause mh-redistribute to run the redist command in the
background. This causes the transaction log to be visible, like
with send.
2001-11-25 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-inc-folder): 'inc' finishes by displaying the first
new message if already showing messages.
2001-11-22 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-prompt-for-folder): Exit with error if no folder
specified, otherwise mh-refile-msg may try to create a folder with
empty name, and this creates problems; even mh-undo can't handle
it (Closes SF #476824).
* mh-comp.el (mh-letter-tool-bar-map): Info button needed to
require 'info. Also tweaked help texts.
(mh-letter-menu): Use headline capitalization (Closes SF #483203).
* mh-e.el (mh-folder-tool-bar-map): Same as above.
(mh-folder-folder-menu, mh-folder-message-menu):
(mh-folder-sequence-menu): Same as above.
* mh-pick.el (mh-pick-menu): Same as above.
2001-11-21 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-reply-show-message-p): The setting of this
variable determines whether the MH show-buffer is diplayed with
the current message when using mh-reply without a prefix argument.
Set it to nil if you already include the message automatically in
your draft using "repl: -filter repl.filter" in your ~/.mh_profile
file.
(mh-reply): Don't show message in other window if
mh-reply-show-message-p is nil.
* mh-e.el (mh-folder-tool-bar-map): Add mail_exec.xpm icon for
mh-execute-commands.
* mh-utils.el (mh-show-mouse): New function to click on a message
in folder-mode and show that message.
* mh-e.el (mh-folder-mode-map): Bind mh-show-mouse to mouse-2.
* mh-e.el (mh-page-msg): Show buffer first if not displayed,
instead of simply complaining there's no other window.
* mh-e.el (mh-folder-tool-bar-map): New tool-bar for folder mode!
(mh-folder-mode): Setup tool-bar.
* mh-mime.el (mh-have-file-command): try to non-fatally load
executable.el because emacs20 doesn't autoload it.
* mh-utils.el (load "executable" t t): Idem.
* mh-utils.el (mh-clean-msg-header): Bug fix. locally bind
after-change-functions to nil, working around a strange font-lock
bug in emacs20 when (add-hook 'mh-show-mode-hook 'turn-on-font-lock)
was used.
* mh-comp.el (require 'sendmail): Moved from mh-comp.el to
mh-utils.el because it is needed in reading mail too.
(mh-header-field-end, mh-in-header-p): Moved to mh-utils.el
because they are needed by mh-show-mode's font-lock code.
Unfortunately, this splits the field related code into two files.
Perhaps it should all go into mh-utils?
2001-11-20 Eric Ding <ericding@alum.mit.edu>
* mh-utils.el (mh-show-from-face): Fix typo in defface
2001-11-20 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-mail-header-separator): Set to -------- as
defined by MH (components, and replcomps files). This variable
cannot be a regexp since it is used as an argument to insert and
is passed through regexp-quote before being used. The previous
value broke a lot of code, including mailcrypt.
* mh-comp.el (mh-letter-mode, mh-send-letter): Insert X-Mailer
header field from mh-send-letter.
(mh-edit-again, mh-extract-rejected-mail): Call
mh-insert-header-separator to ensure that there is a separator.
Packages such as mailcrypt depend on it.
(mh-insert-header-separator): New function to insert
mh-mail-header-separator if it doesn't exist.
2001-11-20 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-mode): Make font-lock-defaults a local variable
* mh-e.el (mh-folder-mode): Same.
* mh-utils.el (mh-show-mode): Same.
* mh-e.el (mh-scan-msg-num-regexp): Delete variable and replace
with mh-good-msg-regexp.
* mh-utils.el (mh-mail-header-separator): Bug fix. Moved from
mh-comp.el to mh-utils.el (which mh-comp.el loads).
* mh-comp.el (mh-in-header-p): Recycle sendmail.el code (as
suggested by Bill).
* mh-utils.el (mh-letter-header-font-lock): Use mh-in-header-p.
* mh-comp.el (mh-letter-tool-bar-map): tool-bar customize button goes
to customizing mh-compose group.
* mh-utils.el (mh-show-mode): font-lock bug fix. Locally set
font-lock-support-mode to nil.
(mh-letter-header-font-lock, mh-header-field-font-lock): font-lock
bug fix. Don't return match beyond font-lock search limit.
* mh-comp.el (mh-letter-mode): Emacs20 bug fix. tool-bar-mode is
not a bound variable.
2001-11-19 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-tool-bar-map): tool-bar help button goes
to 'Draft Editing' info node.
* mh-utils.el (mh-show-from-face, mh-show-to-face): New faces used
for font-lock.
(mh-header-to-font-lock, mh-header-cc-font-lock)
(mh-header-field-font-lock): New helper function returning whole
header field arguments to font-lock.
(mh-show-font-lock-keywords): Heavily modified using the above.
* mh-e.el (mh-scan-msg-num-regexp): Regexp matching the message
number in scan lines.
(mh-scan-date-regexp): Regexp matching a valid date in scan lines.
(mh-scan-rcpt-addr-regexp): Regexp specifying the recipient in
scan lines for messages we sent.
(mh-scan-followup-regexp): Regexp matching a followup subject
line, starting with Re:
(mh-scan-body-regexp):
Regexp matching the message body beginning displayed in scan lines.
(mh-scan.font-lock-regexp): Regexp matching output of the the
optional scan.font-lock format file.
(mh-folder-font-lock-keywords): New font-lock for folder-mode that
uses the above regexps.
2001-11-19 chad <y@mit.edu>
* mh-comp.el (mh-letter-tool-bar-map): made both references to
mh-letter-tool-bar-map conditional on tool-bar-mode, instead of
just one.
2001-11-19 Bill Wohler <wohler@newt.com>
* mh-comp.el (mh-position-on-field): Move to the end of the header
if the field is not present. This function was documented to do
this, but wasn't doing so.
(mh-insert-x-mailer): Simplified by using existing
mh-goto-header-field and mh-insert-fields functions. Now that
mh-insert-fields is used to insert X-Mailer header field, no
longer need to include X-Mailer in mh-x-mailer-string.
2001-11-18 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-tool-bar-map): New version of
mh-letter-mode tool-bar. Changed order of buttons; made customize
and info buttons specific to mh-e.
* mh-e.el (mh-folder-font-lock-keywords): New font-lock regexp
uses variables mh-deleted-msg-regexp, mh-refiled-msg-regexp and
mh-cur-scan-msg-regexp, so will better adapt to non-default scan
formats. Also, lines marked for refiling are now fontified.
2001-11-18 Bill Wohler <wohler@newt.com>
* mh-utils.el (mh-show-mode): Added local variable
mail-header-separator which is initialized to
mh-mail-header-separator.
* mh-comp.el (mh-mail-header-separator): Updated to include ^$.
Needed when running mh-edit-again, since by then the separator is
gone. Added documentation saying one should use
mail-header-separator and initialize it from
mh-mail-header-separator.
(mh-forward): Initialize mail-header-separator since
mh-letter-mode hasn't kicked in yet (which does initialize
mail-header-separator).
(mh-letter-mode): Initialize mail-header-separator from
mh-mail-header-separator, not hard-coded string.
* mh-comp.el (mh-insert-x-mailer-p): New variable to control
whether X-Mailer string is inserted. Default: t.
(mh-x-mailer-string): New variable that caches actual X-Mailer
string.
(mh-letter-mode): Call mh-insert-x-mailer if mh-insert-x-mailer-p
is t.
(mh-insert-x-mailer): New function that inserts X-Mailer header
field.
2001-11-17 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-letter-header-font-lock): New function to return
the entire mail header to font-lock for sedate font-locking.
(mh-show-font-lock-keywords): Modified to fontify whole lines and use
mh-letter-header-font-lock above to fontify whole header.
2001-11-17 Bill Wohler <wohler@newt.com>
* mh-comp.el (mail-header-separator): Added ^ and $ to make more
specific.
(mh-forward, mh-letter-mode): Replaced hard-coded string with
mail-header-separator.
2001-11-16 Bill Wohler <wohler@newt.com>
* mh-e.el (mh-e-RCS-id): Renamed to mh-version.
(mh-version): The variable: Set to a number instead of Id since
the Id didn't have the mh-e version number, and both Emacs and
gnus do it this way too.
(mh-version): The function: Fixed for nmh. Now displays mh-e
version correctly. Cleaned up output and display mh-progs, etc.
(Closes SF #405620.)
2001-11-15 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-tool-bar-map): New tool-bar support for
mh-letter-mode in emacs21. Uses icons from gnus/message.el.
* mh-comp.el (mh-letter-mode): Add buffer-local binding of
tool-bar-map to mh-letter-tool-bar-map.
2001-11-15 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-have-file-command): Add check for existence of
executable-find command, which Jeffrey didn't exist in emacs-20.4.
* mh-utils.el (mh-decode-quoted-printable-have-mimedecode): same
as above.
* mh-mime.el (mh-file-mime-type): Bug Fix. Some versions of
'file' output a string like "file: Using regular magic file..."
to stderr, so discard stderr when using call-process with 'file'.
2001-11-14 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-have-file-command): Check if 'file' command on
system accepts arguments -i -b before accepting it for our use.
2001-11-14 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-find-progs): Use expand-file-name instead of
concatenating together strings into a path.
2001-11-14 Peter S Galbraith <psg@debian.org>
* mh-e.el (mh-folder-sequence-menu): Enable mh-widen in sequence
menu only when mh-narrowed-to-seq is t.
2001-11-14 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-have-file-command): Use 'executable-find' instead
of more complicated and error-prone call-process to which command.
* mh-utils.el (mh-decode-quoted-printable-have-mimedecode): Same
change as above.
2001-11-14 Jeffrey C Honig <jch@honig.net>
* mh-e.el (mh-make-folder-mode-line): Bug fix. Properly deal with
folders that do not have any lines in them. Print "no msgs"
instead of "0 msgs". Do not try to print a range when there are
no messages.
* mh-e.el (mh-regenerate-headers): Bug fix. Catch and remove the
"scan: band message list" message.
2001-11-13 Jeffrey C Honig <jch@honig.net>
* mh-utils.el (mh-find-progs): Bug fix. Add "mh/etc" to the
subdirectories to search for "components". On BSD/OS, nmh is in
"/usr/contrib/mh/*".
2001-11-13 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-mode): Bug fix. Load mh-mime before
setting mh-mhn-compose-insert-p (when looking at a "forw: -mime"
message containing a MIME composition) such that the variable is
properly declared as buffer-local.
2001-11-12 Bill Wohler <wohler@newt.com>
* mh-funcs.el (mh-print-msg): mhl is in the mh-lib-progs
directory, not mh-lib (closes SF #481128).
2001-11-12 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-widen): Bug fix (closes SF #481036).
In a sequence with pending deletes and refiles, running mh-widen
would wipe out their notations, even though the sequences are still
defined. Fixed by calling a new function,
mh-notate-deleted-and-refiled. Also changed the coping of
mh-goto-msg-num since it didn't work consistently.
* mh-seq.el (mh-notate-deleted-and-refiled): New functions written
to fix above mh-widen bug. It's a first cut, we may want to clear
all notations first, and notate the current-message sequence and
user sequences. Time will tell.
2001-11-12 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-widen): Make it attempt to stay on the same
message number (closes SF bug #480922).
2001-11-11 Bill Wohler <wohler@newt.com>
* import-emacs: New shell script to import Emacs changes to mh-e.
* Makefile (import): New target to import Emacs changes.
2001-11-09 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-file-mime-type): Bug fix. Change regexp to
extract mime type from 'file -i' command output.
2001-11-08 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-update-sequences-after-mh-show):
New customizable variable telling whether to run
mh-update-sequences in mh-show-mode. Default is t.
* mh-utils.el (mh-show-msg): Run mh-update-sequences when
mh-update-sequences-after-mh-show is set.
2001-11-08 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-decode-quoted-printable-have-mimedecode):
New variable telling whether command 'mimedecode' is on system.
(http://www.freesoft.org/CIE/FAQ/mimedeco.c)
* mh-utils.el (mh-decode-quoted-printable):
New customizable variable telling whether to run mimedecode on
MIME message containing quoted-printable parts. mimedecode will
only alter quoted-printable parts , leaving others intact, and the
resulting message is still fully MIME.
* mh-utils.el (mh-decode-quoted-printable): New function to run
mimedecode on the current buffer.
* mh-utils.el (mh-display-msg): Conditionnaly call
mh-decode-quoted-printable function if mh-decode-quoted-printable
variable is set, to view messages containing quoted-printable
characters into 8-bit.
2001-11-08 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-mode): Set mh-mhn-compose-insert-p if
looking at a "forw: -mime" message containing a MIME composition.
* mh-mime.el (mh-file-mime-type): Bug fix. Failed on files like
"~/.mh_profile" because of shell construct. Wrapped filename with
expand-file-name.
* mh-comp.el (mh-letter-mode-map): C-cC-o keybinding in
mh-letter-mode-map for mh-open-line.
2001-11-07 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-open-line): New user function to split open a line
when editing a reply with included text.
* mh-comp.el (mh-current-fill-prefix): New function used by
mh-open-line to get the fill-prefix on the current line.
* mh-comp.el: Add mh-open-line to mh-letter-mode menubar.
2001-11-06 Peter S Galbraith <psg@debian.org>
* mh-seq.el (mh-region-to-sequence): New function, creating a
sequence named 'region containing the message list in the selected
region.
* mh-e.el (mh-delete-msg): Mark messages in region for deletion if
mark is active and in transient-mark-mode.
* mh-e.el (mh-refile-msg): Mark messages in region for refiling if
mark is active and in transient-mark-mode.
* mh-e.el (mh-undo): Undo message marks for refile or deletion if
region if mark is active and in transient-mark-mode.
2001-11-06 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-letter-mode): Use sendmail.el's fill-paragraph.
Copy its settings for paragraph-start, paragraph-separate,
fill-paragraph-function, adaptive-fill-regexp and
adaptive-fill-first-line-regexp. This make M-q (fill-paragraph)
work correctly!
2001-11-05 Peter S Galbraith <psg@debian.org>
* mh-funcs.el (mh-kill-folder): Remove mh-do-not-confirm condition
and always prompt the user for such a drastic step. Also change
the prompt a bit to clarify it.
2001-11-04 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-mhn-compose-insert-p): New buffer-local variable
to tell when a MIME insertion was done in a letter.
* mh-mime.el (mh-mhn-compose-type): Set mh-mhn-compose-insert-p.
* mh-mime.el (mh-mhn-compose-external-type):
Set mh-mhn-compose-insert-p.
* mh-mime.el (mh-mhn-compose-forw): Set mh-mhn-compose-insert-p.
* mh-mime.el (mh-edit-mhn): Clear mh-mhn-compose-insert-p.
* mh-comp.el (mh-send-letter): Run mh-edit-mhn when
mh-mhn-compose-insert-p is set.
2001-11-03 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-have-file-command): new function testing whether
file command is on the system.
* mh-mime.el (mh-file-mime-type): new function returning MIME type
from file command.
* mh-mime.el (mh-mhn-compose-insertion): Make use of
mh-file-mime-type function instead of prompting.
2001-10-30 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-show-use-goto-addr): defcustom this new
variable, determining whether to call goto-addr in mh-show-mode.
* mh-utils.el (mh-show-mode): Call goto-address when
mh-show-use-goto-addr is t.
2001-10-25 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-recenter): Clarify docs and change '(t) to
(list 4) to match elisp doc on what C-u prefix argument actually is.
2001-10-23 Peter S Galbraith <psg@debian.org>
* mh-utils.el (mh-summary-height): In my quest to make mh-e more
useful out-of-the-box for new users, set mh-summary-height to a
minimum of 4 and a maximum of 10 depending on frame height. I
typically have 70 lines in my Emacs frame, so having a default of
4 was silly for my case.
* mh-e.el (mh-update-sequences): Check for nil value of
mh-current-folder, which happens if mh-summary-height < 4
although I haven't tracked doen why that happens.
2001-10-22 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-insert-fields): Test for nil value when inserting
field.
2001-10-20 Peter S Galbraith <psg@debian.org>
* mh-comp.el (mh-user-agent-compose): Merged-in from XEmacs-21.4 source
* mh-comp.el (mh-letter-mode): Add easy-menu-add statement for XEmacs21
* mh-pick.el (mh-pick-mode): Add easy-menu-add statement for XEmacs21.
* mh-e.el (mh-folder-mode): Add easy-menu-add statements for XEmacs21.
* mh-utils.el: defalias 'screen-height to 'frame-height for XEmacs21.
2001-10-19 Peter S Galbraith <psg@debian.org>
* mh-mime.el (mh-edit-mhn): Use mhbuild in nmh context.
* mh-utils.el (mh-find-progs): The variable mh-nmh-p (t when nmh
is in use rather than MH) was set assuming that the string "nmh"
will be in mh-lib-progs or mh-lib. This failed on Debian systems.
Better to check for the existence of mhbuild in directory mh-progs.
(closes SF bug #441776)
2001-10-18 Peter S Galbraith <psg@debian.org>
* mh-e.el: Add menubar entry from contrib/mh-menubar.el
* mh-comp.el: Add menubar entry from contrib/mh-menubar.el
* mh-pick.el: Add menubar entry from contrib/mh-menubar.el
2001-07-30 Peter S Galbraith <psg@debian.org>
* mh-e.el: Change font-lock patterns for folders.
Fontify scan.font-lock patterns (which will be documented)
and fontify subject lines prefixed with "Re:" differently.
* mh-comp.el (mh-letter-mode): Add font-lock support as in
mh-show-mode.
2001-04-14 chad brown <y@mit.edu>
Rearrange the font-lock keywords a bit.
2001-04-12 chad brown <y@mit.edu>
Preliminary (somewhat boring) font-lock support for mh-e. More
interesting font-lock support probably wants to have better
support for multiple format files
2001-02-24 chad brown <y@mit.edu>
Add default nmh paths to mh-find-prog in mh-utils.el.
change to mh-kill-folder in mh-funcs.el to make it more general.
2001-02-19 Bill Wohler <wohler@newt.com>
* Makefile (EMACS): Renamed to EMACS_HOME. Also, don't define if
EMACS_HOME already exists to give developer a chance to set
environment variable.
(install): $MH-E-SRC is copied to $(EMACS_HOME)/lisp/mail, not
$(EMACS_HOME)/src.
(dist): Leave release in current directory.
Copyright (C) 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc.
This file is part of GNU Emacs.
GNU Emacs is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU Emacs is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU Emacs; see the file COPYING. If not, write to the
Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
Boston, MA 02110-1301, USA.
;; arch-tag: 2577172b-b1bf-4d87-acfb-c9d8780e8851