frcp   [plain text]

#! /bin/bash
#
# original from:
#
# @(#) frcp.ksh 2.2 93/11/14
# 92/06/29 john h. dubois iii (john@armory.com)
# 92/10/14 Cleaned up, improved, added -d and -r options
# 92/11/11 Made work with a dest of '.'
# 93/07/09 Added -l and -n options, & login as anonymous if no .netrc entry
# 93/11/14 Use either passwd or password in .netrc, since ftp does.
#
# conversion to bash v2 syntax by Chet Ramey
#
# frcp: ftp front end with rcp-like syntax.
# Note: requires any machine names given to be listed with
#       user and password in .netrc.  If not, anonymous FTP is
#	done.
#
# full path to ftp binary
if [ -x /usr/bin/ftp ]; then
	FTP=/usr/bin/ftp;
elif [ -x /usr/ucb/ftp ]; then
	FTP=/usr/ucb/ftp
else
	FTP=ftp
fi

istrue()
{
	test 0 -ne "$1"
}
isfalse()
{
	test 0 -eq "$1"
}

# For each filename given, put the filename in filename[n]
# and the machine it is on in machine[n].
function SplitNames {
    typeset file
    typeset -i i=1

    unset filename[*] machine[*]
    for file; do
	case "$file" in
	*:*) machine[i]=${file%%:*} ;;
	*)   machine[i]=$LocalMach ;;
	esac
	filename[i]=${file#*:}
	let i+=1
    done
}

function verboseprint {
    echo "$@"
    echo "$@" 1>&2
}

function MakeDir {
    OFS=$IFS
    local IFS=/ dir component

    case "$1" in
    /*)	;;
     *) dir=.
    esac
    set -- $1
    IFS=$OFS
    for component; do
	dir=$dir/$component
	if [ ! -d "$dir" ]; then
	    if mkdir "$dir"; then :; else
		echo "Could not make directory $dir." >&2
		return 1
	    fi
	fi
    done
    return 0
}

lastisdot ()
{
	case "$1" in
	*/.|*/..)	return 0;;
	*)	return 1;;
	esac
}

# CopyFiles: issue ftp(TC) commands to copy files.
# Usage: CopyFiles [sourcemachine:]sourcepath ... [destmachine:]destpath
# Global vars:
# Uses LocalMach (should be name of local machine)
# Sets global arrs machine[]/filename[]
function CopyFiles {
    unset machine[*] filename[*]

    SplitNames "$@"	# split names into filename[1..n] and machine[1..n]

    local DestMach=${machine[$#]}	# Machine to copy files to
    local DestPath=${filename[$#]} 	# Destination file/dir

    unset machine[$#] filename[$#]

    [ -z "$DestPath" ] && DestPath=.	# dest was given as machine:

    # Try to determine if destination should be a directory
    # so that it can be forced to be a directory.

    case "$DestPath" in
    */)	;;	# don't add / if trailing / already present
    *)  if [ $# -gt 2 ] || # if more than two args given, last must be a dir
	    # If dest in on local machine, check whether it is a directory
    	   [ $DestMach = $LocalMach ] && [ -d "$DestPath" ] || 
	    # If dest ends with . or .., it is a directory
	   lastisdot "$DestPath"
	then
		DestPath=$DestPath/
	fi ;;
    esac

    # If one of the above tests made us think dest is a directory,
    # but it isn't, complain
    case "$DestPath" in
    */)	if [ "$DestMach" = "$LocalMach" ] && [ ! -d "$DestPath" ]; then
		echo "Destination is not a directory." 1>&2
		exit 1
        fi ;;
    esac

    DoCopy "$DestMach" "$DestPath"
}

# Usage: OpenMachine machine-name
# Emits login sequence or doesn't, depending on .netrc file and global
# variables anon and noanon
OpenMachine ()
{
    local machine=$1 netrc=$HOME/.netrc user= password=

    if isfalse $anon && [ -r $netrc ]; then
	set -- $(gawk '
	/machine (.* )?'"$machine"'($| )/,/^ *$/ {
	    Fields[$1] = $2
	    if ("passwd" in Fields)
		Fields["password"] = Fields["passwd"]
	    if ("login" in Fields && "password" in Fields) {
		print Fields["login"] " " Fields["password"]
		exit
	    }
	}
	' $netrc )
	user=$1
	password=$2
    fi
    if [ -z "$password" ]; then
	if istrue $noanon; then
	    echo "No .netrc entry for machine $machine" 1>&2
	    exit 1
	fi
	user=anonymous
	password=$USER@$LocalMach
    fi
    verboseprint open $machine
    echo user $user "*******" 1>&2
    echo user $user $password
}

# Usage: DoCopy destination-machine destination-path
# Copies the files in global arrs machine[]/filename[] to the given dest
# Global vars:
# Uses machine[], filename[], LocalMach, check
DoCopy ()
{
    local DestMach=$1
    local DestPath=$2
    local OpenMach	# Machine that connection is currently open to
    local OWD=$PWD SourceMach SourceFile
    local FileName
    typeset -i i=1

    while [ $i -le ${#machine[*]} ]; do
	istrue $check && verboseprint "runique"

	SourceMach=${machine[i]}
	SourceFile=${filename[i]}

	DestFile=$DestPath
	# if DestPath is a dir,
	# add source filename to it without source path
	case "$DestFile" in
	*/)	DestFile=$DestFile${SourceFile##*/} ;;
	esac

	if [ $SourceMach = $LocalMach ]; then
	    if [ $DestMach != "$OpenMach" ]; then
		OpenMachine $DestMach
		OpenMach=$DestMach
	    fi
	    verboseprint put $SourceFile $DestFile
	elif [ $DestMach = $LocalMach ]; then
	    if istrue $check && [ -f "$DestFile" ]; then
		echo "$DestFile already exists." 1>&2
		continue
	    fi
	    # If destination is on local machine,
	    # the dest will be a full dir/filename
	    if istrue $createdirs; then
		MakeDir "${DestFile%/*}" || continue
	    fi
	    if [ $SourceMach != "$OpenMach" ]; then
		OpenMachine $SourceMach
		OpenMach=$SourceMach
	    fi
	    # If source filename has wildcards ([, ], *, ?) do an mget
	    case "$SourceFile" in
	    \[*\]|*\**|*\?*)
		verboseprint lcd "$DestFile"
		verboseprint mget "$SourceFile"
		verboseprint lcd $OWD ;;
	    *)  verboseprint get "$SourceFile" "$DestFile" ;;
	    esac
	else
	    echo "Neither source machine \"$SourceMach\" "\
"nor destination machine \"$DestMach\" is local." 1>&2
	fi
	let i+=1
    done
}

# Start of main program
name=${0##*/}

if [ "$1" = -h ]; then
    echo \
"$name: do ftp transfers using rcp-style parameters.
Usage: $name <source> <destpath>   or   $name <source> [<source> ...] <destdir>
At least one of <source> and <destpath> must be the local system.
A remote filename is given as machinename:filename
If remote filenames contain wildcards, they will be globbed on the remote
machine.  Make sure they are quoted when $name is invoked.
If the invoking user's .netrc file (see ftp(TC)) contains an entry for the
remote system with a login and password supplied, $name will log in using
the given login and password.  If not, $name will login in as user
anonymous and with the user@localsystem as the password.
Options:
-c: check: do not overwrite files.
-d: create directories as needed.
-f: force: overwrite files (default).
-h: print this help.
-l: fail if there is no entry with login and password for the remote system,
    instead of logging in as anonymous.
-n: log in as anonymous even if there is an entry for the remote system in
    the user's .netrc file.
-r: read source/dest filename pairs from the standard input,
    one pair per line, and copy files accordingly."
    exit 0
fi

typeset -i check=0 createdirs=0 readinput=0 anon=0 noanon=0

while getopts :cdflnr Option
do
    case "$Option" in
    c) check=1;;
    d) createdirs=1;;
    f) check=0;;
    l) noanon=1;;
    n) anon=1;;
    r) readinput=1;;
    \?) echo "$OPTARG: invalid option."; exit 1;;
    esac
done

shift $((OPTIND-1))

LocalMach=`hostname` 

if istrue $readinput; then
    while read line; do
	CopyFiles $line
    done | $FTP -nv
else
    if [ $# -lt 2 ]; then
	echo "$name: Not enough arguments.  Use -h for help." 1>&2
	exit
    fi
    CopyFiles "$@" | $FTP -nv
fi