Makefile.in   [plain text]


# Makefile.in generated by automake 1.9.6 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005  Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#  Copyright 2005 Red Hat, Inc.
# 
#  Permission to use, copy, modify, distribute, and sell this software
#  and its documentation for any purpose is hereby granted without fee,
#  provided that the above copyright notice appear in all copies and
#  that both that copyright notice and this permission notice appear in
#  supporting documentation, and that the name of Red Hat not be used in
#  advertising or publicity pertaining to distribution of the software
#  without specific, written prior permission.  Red Hat makes no
#  representations about the suitability of this software for any
#  purpose.  It is provided "as is" without express or implied warranty.
# 
#  RED HAT DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
#  INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN
#  NO EVENT SHALL RED HAT BE LIABLE FOR ANY SPECIAL, INDIRECT OR
#  CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS
#  OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
#  OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE
#  USE OR PERFORMANCE OF THIS SOFTWARE.
#
#  Process this file with autoconf to create configure.

srcdir = @srcdir@
top_srcdir = @top_srcdir@
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
top_builddir = .
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
INSTALL = @INSTALL@
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = README $(am__configure_deps) $(dist_x11doc_DATA) \
	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
	$(top_srcdir)/configure ChangeLog config.guess config.sub \
	install-sh missing
subdir = .
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno configure.status.lineno
mkinstalldirs = $(install_sh) -d
CONFIG_CLEAN_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-exec-recursive install-info-recursive \
	install-recursive installcheck-recursive installdirs-recursive \
	pdf-recursive ps-recursive uninstall-info-recursive \
	uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(x11docdir)"
dist_x11docDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_x11doc_DATA)
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
distdir = $(PACKAGE)-$(VERSION)
top_distdir = $(distdir)
am__remove_distdir = \
  { test ! -d $(distdir) \
    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
         && rm -fr $(distdir); }; }
DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
GZIP_ENV = --best
distuninstallcheck_listfiles = find . -type f -print
distcleancheck_listfiles = find . -type f -print
ACLOCAL = @ACLOCAL@
ADMIN_MAN_DIR = @ADMIN_MAN_DIR@
ADMIN_MAN_SUFFIX = @ADMIN_MAN_SUFFIX@
AMTAR = @AMTAR@
APP_MAN_DIR = @APP_MAN_DIR@
APP_MAN_SUFFIX = @APP_MAN_SUFFIX@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BUILD_HTMLDOC_FALSE = @BUILD_HTMLDOC_FALSE@
BUILD_HTMLDOC_TRUE = @BUILD_HTMLDOC_TRUE@
BUILD_PDFDOC_FALSE = @BUILD_PDFDOC_FALSE@
BUILD_PDFDOC_TRUE = @BUILD_PDFDOC_TRUE@
BUILD_PSDOC_FALSE = @BUILD_PSDOC_FALSE@
BUILD_PSDOC_TRUE = @BUILD_PSDOC_TRUE@
BUILD_TXTDOC_FALSE = @BUILD_TXTDOC_FALSE@
BUILD_TXTDOC_TRUE = @BUILD_TXTDOC_TRUE@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DOCBOOKHTML = @DOCBOOKHTML@
DOCBOOKPDF = @DOCBOOKPDF@
DOCBOOKPS = @DOCBOOKPS@
DOCBOOKTXT = @DOCBOOKTXT@
DRIVER_MAN_DIR = @DRIVER_MAN_DIR@
DRIVER_MAN_SUFFIX = @DRIVER_MAN_SUFFIX@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
FILE_MAN_DIR = @FILE_MAN_DIR@
FILE_MAN_SUFFIX = @FILE_MAN_SUFFIX@
HARDCOPYDIR = @HARDCOPYDIR@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_MAN_DIR = @LIB_MAN_DIR@
LIB_MAN_SUFFIX = @LIB_MAN_SUFFIX@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MAKE_HTML = @MAKE_HTML@
MAKE_PDF = @MAKE_PDF@
MAKE_PS = @MAKE_PS@
MAKE_TEXT = @MAKE_TEXT@
MISC_MAN_DIR = @MISC_MAN_DIR@
MISC_MAN_SUFFIX = @MISC_MAN_SUFFIX@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
VERSION = @VERSION@
X11DOCDIR = @X11DOCDIR@
am__leading_dot = @am__leading_dot@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
SUBDIRS = hardcopy man sgml
x11docdir = @X11DOCDIR@
dist_x11doc_DATA = MAINTAINERS
EXTRA_DIST = \
	MAINTAINERS \
	misc/xlogo.epsi \
	registry \
	specs/BDF/bdf.ms \
	specs/BDF/fig1.ps \
	specs/BDF/fig2.ps \
	specs/CTEXT/ctext.tbl.ms \
	specs/FSProtocol/protocol.ms \
	specs/GL/libGL.txt \
	specs/i18n/Framework.ms \
	specs/i18n/LocaleDB.ms \
	specs/i18n/Trans.ms \
	specs/ICCCM/icccm.ms \
	specs/ICCCM/indexmacros.t \
	specs/ICE/ICElib.ms \
	specs/ICE/ice.ms \
	specs/PM/PM_spec \
	specs/Render/library \
	specs/rstart/fix.awk \
	specs/rstart/fix.nawk \
	specs/rstart/fix.sed \
	specs/rstart/rstartd.txt \
	specs/rstart/rstart.ms \
	specs/rstart/tmac.rfc \
	specs/RX/RX.mif \
	specs/saver/saver.ms \
	specs/SIAddresses/hostname.txt \
	specs/SIAddresses/IPv6.txt \
	specs/SIAddresses/localuser.txt \
	specs/SIAddresses/README \
	specs/SM/SMlib.ms \
	specs/SM/xsmp.ms \
	specs/specindex.html \
	specs/X11/abstract.t \
	specs/X11/AppA \
	specs/X11/AppB \
	specs/X11/AppC \
	specs/X11/AppD \
	specs/X11/CH01 \
	specs/X11/CH02 \
	specs/X11/CH03 \
	specs/X11/CH04 \
	specs/X11/CH05 \
	specs/X11/CH06 \
	specs/X11/CH07 \
	specs/X11/CH08 \
	specs/X11/CH09 \
	specs/X11/CH10 \
	specs/X11/CH11 \
	specs/X11/CH12 \
	specs/X11/CH13 \
	specs/X11/CH14 \
	specs/X11/CH15 \
	specs/X11/CH16 \
	specs/X11/credits.t \
	specs/X11/glossary \
	specs/X11/indexmacros.t \
	specs/X11/postproc \
	specs/Xaw/AsciiSink \
	specs/Xaw/AsciiSource \
	specs/Xaw/AsciiText \
	specs/Xaw/block.awk \
	specs/Xaw/Box \
	specs/Xaw/CH1 \
	specs/Xaw/CH2 \
	specs/Xaw/CH3.intro \
	specs/Xaw/CH4.intro \
	specs/Xaw/CH5.intro \
	specs/Xaw/CH6.intro \
	specs/Xaw/CH7.intro \
	specs/Xaw/Command \
	specs/Xaw/Dialog \
	specs/Xaw/fixindex.awk \
	specs/Xaw/Form \
	specs/Xaw/Grip \
	specs/Xaw/Label \
	specs/Xaw/List \
	specs/Xaw/MenuButton \
	specs/Xaw/Paned \
	specs/Xaw/Panner \
	specs/Xaw/Porthole \
	specs/Xaw/Repeater \
	specs/Xaw/Scrollbar \
	specs/Xaw/Simple \
	specs/Xaw/SimpleMenu \
	specs/Xaw/Sme \
	specs/Xaw/SmeBSB \
	specs/Xaw/SmeLine \
	specs/Xaw/strings.mit \
	specs/Xaw/strings.xaw \
	specs/Xaw/StripChart \
	specs/Xaw/Template \
	specs/Xaw/Text \
	specs/Xaw/TextActions \
	specs/Xaw/TextCustom \
	specs/Xaw/TextFuncs \
	specs/Xaw/TextSink \
	specs/Xaw/TextSource \
	specs/Xaw/Toggle \
	specs/Xaw/TPage_Credits \
	specs/Xaw/Tree \
	specs/Xaw/Viewport \
	specs/Xaw/widg.idxmac.t \
	specs/Xaw/Xtk.widgets \
	specs/Xaw/Xtk.widg.front \
	specs/XDMCP/xdmcp.ms \
	specs/Xext/AppGroup.mif \
	specs/Xext/bigreq.ms \
	specs/Xext/buffer.ms \
	specs/Xext/dbelib.tex \
	specs/Xext/dbe.tex \
	specs/Xext/DPMSLib.ms \
	specs/Xext/DPMS.ms \
	specs/Xext/evi.ms \
	specs/Xext/lbxalg.mif \
	specs/Xext/lbx.book \
	specs/Xext/lbx.mif \
	specs/Xext/mit-shm.ms \
	specs/Xext/recordlib.ms \
	specs/Xext/record.ms \
	specs/Xext/security.tex \
	specs/Xext/shapelib.ms \
	specs/Xext/shape.ms \
	specs/Xext/synclib.tex \
	specs/Xext/sync.tex \
	specs/Xext/tog-cup.ms \
	specs/Xext/xc-misc.ms \
	specs/Xext/xtest1.info \
	specs/Xext/xtest1.mm \
	specs/Xext/xtestlib.ms \
	specs/Xext/xtest.ms \
	specs/xfs/design.ms \
	specs/xfs/FSlib.doc \
	specs/Xi/encoding.ms \
	specs/Xi/library.ms \
	specs/XIM/xim.ms \
	specs/Xi/porting.ms \
	specs/Xi/protocol.ms \
	specs/XKB/Proto/dflttrns.fm5 \
	specs/XKB/Proto/encoding.fm5 \
	specs/XKB/Proto/keysyms.fm5 \
	specs/XKB/Proto/protocol.fm5 \
	specs/XKB/Proto/prototoc.doc \
	specs/XKB/Proto/title.fm5 \
	specs/XKB/Proto/types.fm5 \
	specs/XKB/Proto/XKBproto.book \
	specs/XKB/XKBlib/allchaps.fm5 \
	specs/XKB/XKBlib/allchaps.ix \
	specs/XKB/XKBlib/allchaps.lof \
	specs/XKB/XKBlib/allchaps.lot \
	specs/XKB/XKBlib/allchaps.ps \
	specs/XKB/XKBlib/allchaps.toc \
	specs/XKB/XKBlib/fonts.fm5 \
	specs/XKB/XKBlib/title.fm5 \
	specs/XKB/XKBlib/XKBlib.book \
	specs/XLFD/xlfd.tbl.ms \
	specs/Xmu/Xmu.ms \
	specs/XPRINT/xp_library.book \
	specs/XPRINT/xp_library_cov.mif \
	specs/XPRINT/xp_libraryIX.doc \
	specs/XPRINT/xp_library.mif \
	specs/XPRINT/xp_libraryTOC.doc \
	specs/XPRINT/xp_proto.book \
	specs/XPRINT/xp_proto_cov.mif \
	specs/XPRINT/xp_protoIX.doc \
	specs/XPRINT/xp_proto.mif \
	specs/XPRINT/xp_protoTOC.doc \
	specs/XProtocol/glossary \
	specs/XProtocol/indexmacros.t \
	specs/XProtocol/postproc \
	specs/XProtocol/X11.encoding \
	specs/XProtocol/X11.keysyms \
	specs/XProtocol/X11.protocol \
	specs/Xserver/analysis.tex \
	specs/Xserver/appgroup.ms \
	specs/Xserver/fontlib.ms \
	specs/Xserver/secint.tex \
	specs/Xserver/Xprt.book \
	specs/Xserver/Xprt_cov.mif \
	specs/Xserver/XprtIX.doc \
	specs/Xserver/Xprt.mif \
	specs/Xserver/XprtTOC.doc \
	specs/Xt/appA \
	specs/Xt/appB \
	specs/Xt/appC \
	specs/Xt/appD \
	specs/Xt/appE \
	specs/Xt/appF \
	specs/Xt/CH01 \
	specs/Xt/CH02 \
	specs/Xt/CH03 \
	specs/Xt/CH04 \
	specs/Xt/CH05 \
	specs/Xt/CH06 \
	specs/Xt/CH07 \
	specs/Xt/CH08 \
	specs/Xt/CH09 \
	specs/Xt/CH10 \
	specs/Xt/CH11 \
	specs/Xt/CH12 \
	specs/Xt/CH13 \
	specs/Xt/intr.idxmac.t \
	specs/Xt/postproc \
	specs/xtrans/Xtrans.mm \
	specs/Xt/strings.mit \
	specs/Xt/Xtk.intr.front \
	specs/XvMC/XvMC_API.txt \
	specs/Xv/xv-protocol-v2.txt \
	util/block.awk \
	util/fixindex.awk \
	util/indexmacros.t \
	util/macros.t

all: all-recursive

.SUFFIXES:
am--refresh:
	@:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
	      cd $(srcdir) && $(AUTOMAKE) --foreign  \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
	cd $(top_srcdir) && \
	  $(AUTOMAKE) --foreign  Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
uninstall-info-am:
install-dist_x11docDATA: $(dist_x11doc_DATA)
	@$(NORMAL_INSTALL)
	test -z "$(x11docdir)" || $(mkdir_p) "$(DESTDIR)$(x11docdir)"
	@list='$(dist_x11doc_DATA)'; for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  f=$(am__strip_dir) \
	  echo " $(dist_x11docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(x11docdir)/$$f'"; \
	  $(dist_x11docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(x11docdir)/$$f"; \
	done

uninstall-dist_x11docDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(dist_x11doc_DATA)'; for p in $$list; do \
	  f=$(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(x11docdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(x11docdir)/$$f"; \
	done

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

mostlyclean-recursive clean-recursive distclean-recursive \
maintainer-clean-recursive:
	@failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	    $$tags $$unique; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	tags=; \
	here=`pwd`; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '    { files[$$0] = 1; } \
	       END { for (i in files) print i; }'`; \
	test -z "$(CTAGS_ARGS)$$tags$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$tags $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && cd $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) $$here

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	$(am__remove_distdir)
	mkdir $(distdir)
	$(mkdir_p) $(distdir)/misc $(distdir)/specs $(distdir)/specs/BDF $(distdir)/specs/CTEXT $(distdir)/specs/FSProtocol $(distdir)/specs/GL $(distdir)/specs/ICCCM $(distdir)/specs/ICE $(distdir)/specs/PM $(distdir)/specs/RX $(distdir)/specs/Render $(distdir)/specs/SIAddresses $(distdir)/specs/SM $(distdir)/specs/X11 $(distdir)/specs/XDMCP $(distdir)/specs/XIM $(distdir)/specs/XKB/Proto $(distdir)/specs/XKB/XKBlib $(distdir)/specs/XLFD $(distdir)/specs/XPRINT $(distdir)/specs/XProtocol $(distdir)/specs/Xaw $(distdir)/specs/Xext $(distdir)/specs/Xi $(distdir)/specs/Xmu $(distdir)/specs/Xserver $(distdir)/specs/Xt $(distdir)/specs/Xv $(distdir)/specs/XvMC $(distdir)/specs/i18n $(distdir)/specs/rstart $(distdir)/specs/saver $(distdir)/specs/xfs $(distdir)/specs/xtrans $(distdir)/util
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
	list='$(DISTFILES)'; for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
	  esac; \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
	    dir="/$$dir"; \
	    $(mkdir_p) "$(distdir)$$dir"; \
	  else \
	    dir=''; \
	  fi; \
	  if test -d $$d/$$file; then \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
	    fi; \
	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
	  else \
	    test -f $(distdir)/$$file \
	    || cp -p $$d/$$file $(distdir)/$$file \
	    || exit 1; \
	  fi; \
	done
	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(mkdir_p) "$(distdir)/$$subdir" \
	    || exit 1; \
	    distdir=`$(am__cd) $(distdir) && pwd`; \
	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
	    (cd $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$top_distdir" \
	        distdir="$$distdir/$$subdir" \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
	-find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
	|| chmod -R a+r $(distdir)
dist-gzip: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	$(am__remove_distdir)
dist-bzip2: distdir
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

dist-tarZ: distdir
	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
	$(am__remove_distdir)

dist-shar: distdir
	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
	$(am__remove_distdir)

dist-zip: distdir
	-rm -f $(distdir).zip
	zip -rq $(distdir).zip $(distdir)
	$(am__remove_distdir)

dist dist-all: distdir
	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
	$(am__remove_distdir)

# This target untars the dist file and tries a VPATH configuration.  Then
# it guarantees that the distribution is self-contained by making another
# tarfile.
distcheck: dist
	case '$(DIST_ARCHIVES)' in \
	*.tar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
	*.tar.bz2*) \
	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
	*.tar.Z*) \
	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
	*.shar.gz*) \
	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
	*.zip*) \
	  unzip $(distdir).zip ;;\
	esac
	chmod -R a-w $(distdir); chmod a+w $(distdir)
	mkdir $(distdir)/_build
	mkdir $(distdir)/_inst
	chmod a-w $(distdir)
	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
	  && cd $(distdir)/_build \
	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
	    $(DISTCHECK_CONFIGURE_FLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) \
	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
	  && $(MAKE) $(AM_MAKEFLAGS) check \
	  && $(MAKE) $(AM_MAKEFLAGS) install \
	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
	        distuninstallcheck \
	  && chmod -R a-w "$$dc_install_base" \
	  && ({ \
	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
	  && rm -rf "$$dc_destdir" \
	  && $(MAKE) $(AM_MAKEFLAGS) dist \
	  && rm -rf $(DIST_ARCHIVES) \
	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
	$(am__remove_distdir)
	@(echo "$(distdir) archives ready for distribution: "; \
	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
distuninstallcheck:
	@cd $(distuninstallcheck_dir) \
	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
	   || { echo "ERROR: files left after uninstall:" ; \
	        if test -n "$(DESTDIR)"; then \
	          echo "  (check DESTDIR support)"; \
	        fi ; \
	        $(distuninstallcheck_listfiles) ; \
	        exit 1; } >&2
distcleancheck: distclean
	@if test '$(srcdir)' = . ; then \
	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
	  exit 1 ; \
	fi
	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
	  || { echo "ERROR: files left in build directory after distclean:" ; \
	       $(distcleancheck_listfiles) ; \
	       exit 1; } >&2
check-am: all-am
check: check-recursive
all-am: Makefile $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(x11docdir)"; do \
	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive

clean-am: clean-generic mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

info: info-recursive

info-am:

install-data-am: install-dist_x11docDATA

install-exec-am:

install-info: install-info-recursive

install-man:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-dist_x11docDATA uninstall-info-am

uninstall-info: uninstall-info-recursive

.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
	check-am clean clean-generic clean-recursive ctags \
	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-shar \
	dist-tarZ dist-zip distcheck distclean distclean-generic \
	distclean-recursive distclean-tags distcleancheck distdir \
	distuninstallcheck dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am \
	install-dist_x11docDATA install-exec install-exec-am \
	install-info install-info-am install-man install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-recursive mostlyclean mostlyclean-generic \
	mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-dist_x11docDATA \
	uninstall-info-am

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: