.\" $OpenBSD: ssh-keygen.1,v 1.79 2008/07/24 23:55:30 sthen Exp $ .\" .\" -*- nroff -*- .\" .\" Author: Tatu Ylonen <firstname.lastname@example.org> .\" Copyright (c) 1995 Tatu Ylonen <email@example.com>, Espoo, Finland .\" All rights reserved .\" .\" As far as I am concerned, the code I have written for this software .\" can be used freely for any purpose. Any derived versions of this .\" software must be clearly marked as such, and if the derived work is .\" incompatible with the protocol description in the RFC file, it must be .\" called by a name other than "ssh" or "Secure Shell". .\" .\" .\" Copyright (c) 1999,2000 Markus Friedl. All rights reserved. .\" Copyright (c) 1999 Aaron Campbell. All rights reserved. .\" Copyright (c) 1999 Theo de Raadt. All rights reserved. .\" .\" Redistribution and use in source and binary forms, with or without .\" modification, are permitted provided that the following conditions .\" are met: .\" 1. Redistributions of source code must retain the above copyright .\" notice, this list of conditions and the following disclaimer. .\" 2. Redistributions in binary form must reproduce the above copyright .\" notice, this list of conditions and the following disclaimer in the .\" documentation and/or other materials provided with the distribution. .\" .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. .\" .Dd $Mdocdate: July 24 2008 $ .Dt SSH-KEYGEN 1 .Os .Sh NAME .Nm ssh-keygen .Nd authentication key generation, management and conversion .Sh SYNOPSIS .Nm ssh-keygen .Bk -words .Op Fl q .Op Fl b Ar bits .Fl t Ar type .Op Fl N Ar new_passphrase .Op Fl C Ar comment .Op Fl f Ar output_keyfile .Ek .Nm ssh-keygen .Fl p .Op Fl P Ar old_passphrase .Op Fl N Ar new_passphrase .Op Fl f Ar keyfile .Nm ssh-keygen .Fl i .Op Fl f Ar input_keyfile .Nm ssh-keygen .Fl e .Op Fl f Ar input_keyfile .Nm ssh-keygen .Fl y .Op Fl f Ar input_keyfile .Nm ssh-keygen .Fl c .Op Fl P Ar passphrase .Op Fl C Ar comment .Op Fl f Ar keyfile .Nm ssh-keygen .Fl l .Op Fl f Ar input_keyfile .Nm ssh-keygen .Fl B .Op Fl f Ar input_keyfile .Nm ssh-keygen .Fl D Ar reader .Nm ssh-keygen .Fl F Ar hostname .Op Fl f Ar known_hosts_file .Op Fl l .Nm ssh-keygen .Fl H .Op Fl f Ar known_hosts_file .Nm ssh-keygen .Fl R Ar hostname .Op Fl f Ar known_hosts_file .Nm ssh-keygen .Fl U Ar reader .Op Fl f Ar input_keyfile .Nm ssh-keygen .Fl r Ar hostname .Op Fl f Ar input_keyfile .Op Fl g .Nm ssh-keygen .Fl G Ar output_file .Op Fl v .Op Fl b Ar bits .Op Fl M Ar memory .Op Fl S Ar start_point .Nm ssh-keygen .Fl T Ar output_file .Fl f Ar input_file .Op Fl v .Op Fl a Ar num_trials .Op Fl W Ar generator .Sh DESCRIPTION .Nm generates, manages and converts authentication keys for .Xr ssh 1 . .Nm can create RSA keys for use by SSH protocol version 1 and RSA or DSA keys for use by SSH protocol version 2. The type of key to be generated is specified with the .Fl t option. If invoked without any arguments, .Nm will generate an RSA key for use in SSH protocol 2 connections. .Pp .Nm is also used to generate groups for use in Diffie-Hellman group exchange (DH-GEX). See the .Sx MODULI GENERATION section for details. .Pp Normally each user wishing to use SSH with RSA or DSA authentication runs this once to create the authentication key in .Pa ~/.ssh/identity , .Pa ~/.ssh/id_dsa or .Pa ~/.ssh/id_rsa . Additionally, the system administrator may use this to generate host keys, as seen in .Pa /etc/rc . .Pp Normally this program generates the key and asks for a file in which to store the private key. The public key is stored in a file with the same name but .Dq .pub appended. The program also asks for a passphrase. The passphrase may be empty to indicate no passphrase (host keys must have an empty passphrase), or it may be a string of arbitrary length. A passphrase is similar to a password, except it can be a phrase with a series of words, punctuation, numbers, whitespace, or any string of characters you want. Good passphrases are 10-30 characters long, are not simple sentences or otherwise easily guessable (English prose has only 1-2 bits of entropy per character, and provides very bad passphrases), and contain a mix of upper and lowercase letters, numbers, and non-alphanumeric characters. The passphrase can be changed later by using the .Fl p option. .Pp There is no way to recover a lost passphrase. If the passphrase is lost or forgotten, a new key must be generated and copied to the corresponding public key to other machines. .Pp For RSA1 keys, there is also a comment field in the key file that is only for convenience to the user to help identify the key. The comment can tell what the key is for, or whatever is useful. The comment is initialized to .Dq user@host when the key is created, but can be changed using the .Fl c option. .Pp After a key is generated, instructions below detail where the keys should be placed to be activated. .Pp The options are as follows: .Bl -tag -width Ds .It Fl a Ar trials Specifies the number of primality tests to perform when screening DH-GEX candidates using the .Fl T command. .It Fl B Show the bubblebabble digest of specified private or public key file. .It Fl b Ar bits Specifies the number of bits in the key to create. For RSA keys, the minimum size is 768 bits and the default is 2048 bits. Generally, 2048 bits is considered sufficient. DSA keys must be exactly 1024 bits as specified by FIPS 186-2. .It Fl C Ar comment Provides a new comment. .It Fl c Requests changing the comment in the private and public key files. This operation is only supported for RSA1 keys. The program will prompt for the file containing the private keys, for the passphrase if the key has one, and for the new comment. .It Fl D Ar reader Download the RSA public key stored in the smartcard in .Ar reader . .It Fl e This option will read a private or public OpenSSH key file and print the key in RFC 4716 SSH Public Key File Format to stdout. This option allows exporting keys for use by several commercial SSH implementations. .It Fl F Ar hostname Search for the specified .Ar hostname in a .Pa known_hosts file, listing any occurrences found. This option is useful to find hashed host names or addresses and may also be used in conjunction with the .Fl H option to print found keys in a hashed format. .It Fl f Ar filename Specifies the filename of the key file. .It Fl G Ar output_file Generate candidate primes for DH-GEX. These primes must be screened for safety (using the .Fl T option) before use. .It Fl g Use generic DNS format when printing fingerprint resource records using the .Fl r command. .It Fl H Hash a .Pa known_hosts file. This replaces all hostnames and addresses with hashed representations within the specified file; the original content is moved to a file with a .old suffix. These hashes may be used normally by .Nm ssh and .Nm sshd , but they do not reveal identifying information should the file's contents be disclosed. This option will not modify existing hashed hostnames and is therefore safe to use on files that mix hashed and non-hashed names. .It Fl i This option will read an unencrypted private (or public) key file in SSH2-compatible format and print an OpenSSH compatible private (or public) key to stdout. .Nm also reads the RFC 4716 SSH Public Key File Format. This option allows importing keys from several commercial SSH implementations. .It Fl l Show fingerprint of specified public key file. Private RSA1 keys are also supported. For RSA and DSA keys .Nm tries to find the matching public key file and prints its fingerprint. If combined with .Fl v , an ASCII art representation of the key is supplied with the fingerprint. .It Fl M Ar memory Specify the amount of memory to use (in megabytes) when generating candidate moduli for DH-GEX. .It Fl N Ar new_passphrase Provides the new passphrase. .It Fl P Ar passphrase Provides the (old) passphrase. .It Fl p Requests changing the passphrase of a private key file instead of creating a new private key. The program will prompt for the file containing the private key, for the old passphrase, and twice for the new passphrase. .It Fl q Silence .Nm ssh-keygen . Used by .Pa /etc/rc when creating a new key. .It Fl R Ar hostname Removes all keys belonging to .Ar hostname from a .Pa known_hosts file. This option is useful to delete hashed hosts (see the .Fl H option above). .It Fl r Ar hostname Print the SSHFP fingerprint resource record named .Ar hostname for the specified public key file. .It Fl S Ar start Specify start point (in hex) when generating candidate moduli for DH-GEX. .It Fl T Ar output_file Test DH group exchange candidate primes (generated using the .Fl G option) for safety. .It Fl t Ar type Specifies the type of key to create. The possible values are .Dq rsa1 for protocol version 1 and .Dq rsa or .Dq dsa for protocol version 2. .It Fl U Ar reader Upload an existing RSA private key into the smartcard in .Ar reader . .It Fl v Verbose mode. Causes .Nm to print debugging messages about its progress. This is helpful for debugging moduli generation. Multiple .Fl v options increase the verbosity. The maximum is 3. .It Fl W Ar generator Specify desired generator when testing candidate moduli for DH-GEX. .It Fl y This option will read a private OpenSSH format file and print an OpenSSH public key to stdout. .El .Sh MODULI GENERATION .Nm may be used to generate groups for the Diffie-Hellman Group Exchange (DH-GEX) protocol. Generating these groups is a two-step process: first, candidate primes are generated using a fast, but memory intensive process. These candidate primes are then tested for suitability (a CPU-intensive process). .Pp Generation of primes is performed using the .Fl G option. The desired length of the primes may be specified by the .Fl b option. For example: .Pp .Dl # ssh-keygen -G moduli-2048.candidates -b 2048 .Pp By default, the search for primes begins at a random point in the desired length range. This may be overridden using the .Fl S option, which specifies a different start point (in hex). .Pp Once a set of candidates have been generated, they must be tested for suitability. This may be performed using the .Fl T option. In this mode .Nm will read candidates from standard input (or a file specified using the .Fl f option). For example: .Pp .Dl # ssh-keygen -T moduli-2048 -f moduli-2048.candidates .Pp By default, each candidate will be subjected to 100 primality tests. This may be overridden using the .Fl a option. The DH generator value will be chosen automatically for the prime under consideration. If a specific generator is desired, it may be requested using the .Fl W option. Valid generator values are 2, 3, and 5. .Pp Screened DH groups may be installed in .Pa /etc/moduli . It is important that this file contains moduli of a range of bit lengths and that both ends of a connection share common moduli. .Sh FILES .Bl -tag -width Ds .It Pa ~/.ssh/identity Contains the protocol version 1 RSA authentication identity of the user. This file should not be readable by anyone but the user. It is possible to specify a passphrase when generating the key; that passphrase will be used to encrypt the private part of this file using 3DES. This file is not automatically accessed by .Nm but it is offered as the default file for the private key. .Xr ssh 1 will read this file when a login attempt is made. .It Pa ~/.ssh/identity.pub Contains the protocol version 1 RSA public key for authentication. The contents of this file should be added to .Pa ~/.ssh/authorized_keys on all machines where the user wishes to log in using RSA authentication. There is no need to keep the contents of this file secret. .It Pa ~/.ssh/id_dsa Contains the protocol version 2 DSA authentication identity of the user. This file should not be readable by anyone but the user. It is possible to specify a passphrase when generating the key; that passphrase will be used to encrypt the private part of this file using 3DES. This file is not automatically accessed by .Nm but it is offered as the default file for the private key. .Xr ssh 1 will read this file when a login attempt is made. .It Pa ~/.ssh/id_dsa.pub Contains the protocol version 2 DSA public key for authentication. The contents of this file should be added to .Pa ~/.ssh/authorized_keys on all machines where the user wishes to log in using public key authentication. There is no need to keep the contents of this file secret. .It Pa ~/.ssh/id_rsa Contains the protocol version 2 RSA authentication identity of the user. This file should not be readable by anyone but the user. It is possible to specify a passphrase when generating the key; that passphrase will be used to encrypt the private part of this file using 3DES. This file is not automatically accessed by .Nm but it is offered as the default file for the private key. .Xr ssh 1 will read this file when a login attempt is made. .It Pa ~/.ssh/id_rsa.pub Contains the protocol version 2 RSA public key for authentication. The contents of this file should be added to .Pa ~/.ssh/authorized_keys on all machines where the user wishes to log in using public key authentication. There is no need to keep the contents of this file secret. .It Pa /etc/moduli Contains Diffie-Hellman groups used for DH-GEX. The file format is described in .Xr moduli 5 . .El .Sh SEE ALSO .Xr ssh 1 , .Xr ssh-add 1 , .Xr ssh-agent 1 , .Xr moduli 5 , .Xr sshd 8 .Rs .%R RFC 4716 .%T "The Secure Shell (SSH) Public Key File Format" .%D 2006 .Re .Sh AUTHORS OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen. Aaron Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt and Dug Song removed many bugs, re-added newer features and created OpenSSH. Markus Friedl contributed the support for SSH protocol versions 1.5 and 2.0.