/* * Copyright (c) 1998-2002 Apple Computer, Inc. All rights reserved. * * @APPLE_LICENSE_HEADER_START@ * * The contents of this file constitute Original Code as defined in and * are subject to the Apple Public Source License Version 1.2 (the * "License"). You may not use this file except in compliance with the * License. Please obtain a copy of the License at * http://www.apple.com/publicsource and read it before using this file. * * This Original Code and all software distributed under the License are * distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, EITHER * EXPRESS OR IMPLIED, AND APPLE HEREBY DISCLAIMS ALL SUCH WARRANTIES, * INCLUDING WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT OR NON-INFRINGEMENT. * Please see the License for the specific language governing rights and * limitations under the License. * * @APPLE_LICENSE_HEADER_END@ */ #ifndef _IOKIT_IOUSBDEVICE_H #define _IOKIT_IOUSBDEVICE_H #include <IOKit/usb/IOUSBNub.h> #include <IOKit/usb/IOUSBPipe.h> #include <IOKit/IOBufferMemoryDescriptor.h> #include <kern/thread_call.h> // The following are definitions for errata properties needed for different devices. This // should be but in the dictionary of the IOUSBDevice in question. This can be achieved // by using the AppleUSBMergeNub class and having an IOProviderMergeProperties dictionary // with the required properties. // This property allows a device to specify a configuration value of 0 in its configuration // descriptor. This does not follow the spec, but we will allow it in order to get the device // to work. The property should be a Boolean // #define kAllowConfigValueOfZero "kAllowZeroConfigValue" #define kAllowNumConfigsOfZero "kAllowZeroNumConfigs" class IOUSBController; class IOUSBInterface; /*! @class IOUSBDevice @abstract The IOService object representing a device on the USB bus. @discussion This class provides functionality to configure a device and to create IOUSBInterface objects to represent the interfaces of the device. */ class IOUSBDevice : public IOUSBNub { friend class IOUSBController; friend class IOUSBInterface; OSDeclareDefaultStructors(IOUSBDevice) protected: USBDeviceAddress _address; IOUSBController * _controller; IOUSBPipe * _pipeZero; IOUSBDeviceDescriptor _descriptor; UInt32 _busPowerAvailable; UInt8 _speed; IOUSBEndpointDescriptor _endpointZero; // Fake ep for control pipe void * _port; // Obsolete, do not use IOBufferMemoryDescriptor** _configList; IOUSBInterface** _interfaceList; UInt8 _currentConfigValue; UInt8 _numInterfaces; struct ExpansionData { UInt32 _portNumber; thread_call_t _doPortResetThread; IOUSBDevice * _usbPlaneParent; bool _portResetThreadActive; bool _allowConfigValueOfZero; thread_call_t _doPortSuspendThread; bool _portSuspendThreadActive; thread_call_t _doPortReEnumerateThread; bool _resetInProgress; bool _portHasBeenReset; bool _deviceterminating; IORecursiveLock* _getConfigLock; }; ExpansionData * _expansionData; #define _portNumber _expansionData->_portNumber #define _doPortResetThread _expansionData->_doPortResetThread #define _usbPlaneParent _expansionData->_usbPlaneParent #define _portResetThreadActive _expansionData->_portResetThreadActive #define _allowConfigValueOfZero _expansionData->_allowConfigValueOfZero #define _doPortSuspendThread _expansionData->_doPortSuspendThread #define _portSuspendThreadActive _expansionData->_portSuspendThreadActive #define _doPortReEnumerateThread _expansionData->_doPortReEnumerateThread #define _resetInProgress _expansionData->_resetInProgress #define _portHasBeenReset _expansionData->_portHasBeenReset #define _deviceterminating _expansionData->_deviceterminating #define _getConfigLock _expansionData->_getConfigLock virtual void free(); const IOUSBConfigurationDescriptor *FindConfig(UInt8 configValue, UInt8 *configIndex=0); virtual IOUSBInterface * GetInterface(const IOUSBInterfaceDescriptor *interface); public: virtual IOReturn SetFeature(UInt8 feature); protected: virtual IOReturn GetConfigDescriptor(UInt8 configIndex, void *data, UInt32 len); virtual IOReturn GetDeviceDescriptor(IOUSBDeviceDescriptor *desc, UInt32 size); virtual bool init(USBDeviceAddress deviceAddress, UInt32 powerAvaiable, UInt8 speed, UInt8 maxPacketSize ); virtual bool matchPropertyTable(OSDictionary * table, SInt32 *score); public: virtual void SetProperties(); static IOUSBDevice *NewDevice(void); // IOService methods virtual bool attach(IOService *provider); virtual bool start( IOService * provider ); virtual void stop( IOService * provider ); virtual bool finalize(IOOptionBits options); virtual IOReturn message( UInt32 type, IOService * provider, void * argument = 0 ); virtual bool willTerminate( IOService * provider, IOOptionBits options ); virtual bool didTerminate( IOService * provider, IOOptionBits options, bool * defer ); virtual void SetPort(void *port); // Obsolete, do NOT use /*! @function FindNextInterfaceDescriptor return a pointer to the next interface descriptor within the given full configuration descriptor satisfying the requirements specified, or NULL if there aren't any. @param configDescIn the configuration descriptor within which to search. obtained from GetFullConfigurationDescriptor(configIndex). use NULL to specify the current configuration's descriptor. @param intfDesc interface descriptor from which to start the search. NULL for the first interface descriptor in the given configuration descriptor @param request IOUSBFindInterfaceRequest specifying the desired interface. Not changed. @param descOut pointer to placeholder for the returned descriptor ptr @result returns kIOReturnBadArgument if configDesc is not correct, or if configDesc is NULL and the device is not configured, or if intfDesc is not in configDesc. Otherwise returns kIOReturnSuccess or kIOUSBInterfaceNotFound. */ virtual IOReturn FindNextInterfaceDescriptor(const IOUSBConfigurationDescriptor *configDescIn, const IOUSBInterfaceDescriptor *intfDesc, const IOUSBFindInterfaceRequest *request, IOUSBInterfaceDescriptor **descOut); /*! @function FindNextInterface return an pointer to an IOUSBInterface object satisfying the requirements specified in request, or NULL if there aren't any. the device must be configured for there to be any interfaces. @param current interface to start searching from, NULL to start at the beginning of the device's interface list for the current configuration. @param request specifies what properties an interface must have to match. @result Pointer to a matching IOUSBInterface, or NULL if none match. Note: The IOUSBInterface is NOT retained for the caller. If the caller wishes to continue to use the returned object, it should call retain() on that object. */ virtual IOUSBInterface *FindNextInterface(IOUSBInterface *current, IOUSBFindInterfaceRequest *request); /*! @function CreateInterfaceIterator return an OSIterator to iterate through interfaces satisfying the requirements specified in request. @param request specifies what properties an interface must have to match. @result Pointer to an OSIterator. */ virtual OSIterator *CreateInterfaceIterator(IOUSBFindInterfaceRequest *request); // Get pointer to full config info (cached in device, don't free returned pointer) /*! @function GetFullConfigurationDescriptor return a pointer to all the descriptors for the requested configuration. @param configIndex The configuration index (not the configuration value) @result Pointer to the descriptors, which are cached in the IOUSBDevice object. */ virtual const IOUSBConfigurationDescriptor *GetFullConfigurationDescriptor(UInt8 configIndex); /*! @function GetConfigurationDescriptor Copy the specified amount of data for a configuration into the suppled buffer. @param configValue The configuration value @param data Buffer to copy data into @param len number of bytes to copy */ virtual IOReturn GetConfigurationDescriptor(UInt8 configValue, void *data, UInt32 len); /*! @function ResetDevice Reset the device, returning it to the addressed, unconfigured state. This is useful if a device has got badly confused. Note that the AppleUSBComposite driver will automatically reconfigure the device if it is a composite device. */ virtual IOReturn ResetDevice(); /*! @function SetConfiguration Do a USB SetConfiguration call to the device. The caller must have the device open() in order to actually cause a configuration change. If the device is currently configured, all IOUSBInterface objects associated with the device are freed. After the new configuration has been set, all of its IOUSBInterface objects are instantiated automatically. @param forClient The client requesting the configuration change @param configValue The desired configuration value. @param startInterfaceMatching A boolean specifying whether IOKit should begin the process of finding matching drivers for the new IOUSBInterface objects. */ virtual IOReturn SetConfiguration(IOService *forClient, UInt8 configValue, bool startInterfaceMatching=true); // Access to addressing and cached info /*! @function GetAddress returns the bus address of the device */ virtual USBDeviceAddress GetAddress(void); /*! @function GetSpeed returns the speed of the device */ virtual UInt8 GetSpeed(void); /*! @function GetBus returns a pointer to the IOUSBController object for the device */ virtual IOUSBController *GetBus(void); /*! @function GetBusPowerAvailable returns the power available to the device, in units of 2mA */ virtual UInt32 GetBusPowerAvailable( void ); /*! @function GetMaxPacketSize returns the maximum packet size for endpoint zero (only 8, 16, 32, 64 are valid) */ virtual UInt8 GetMaxPacketSize(void); /*! @function GetVendorID returns the Vendor ID of the device */ virtual UInt16 GetVendorID(void); /*! @function GetProductID returns the Product ID of the device */ virtual UInt16 GetProductID(void); /*! @function GetDeviceRelease returns the DeviceRelease information */ virtual UInt16 GetDeviceRelease(void); /*! @function GetNumConfigs returns the number of configs in the device config descriptor */ virtual UInt8 GetNumConfigurations(void); /*! @function GetManufacturerStringIndex returns the index of string descriptor describing manufacturer */ virtual UInt8 GetManufacturerStringIndex(void ); /*! @function GetProductStringIndex returns the index of string descriptor describing product */ virtual UInt8 GetProductStringIndex(void ); /*! @function GetSerialNumberStringIndex returns the index of string descriptor describing the device's serial number */ virtual UInt8 GetSerialNumberStringIndex(void ); /*! @function GetPipeZero returns a pointer to the device's default control pipe */ virtual IOUSBPipe * GetPipeZero(void); /*! @function MakePipe @abstract build a pipe on a given endpoint @param ep A description of the endpoint returns the desired IOUSBPipe object */ virtual IOUSBPipe* MakePipe(const IOUSBEndpointDescriptor *ep); // this method is deprecated. use the other DeviceRequest methods virtual IOReturn DeviceRequest(IOUSBDevRequest *request, IOUSBCompletion *completion = 0); // Same but with a memory descriptor virtual IOReturn DeviceRequest(IOUSBDevRequestDesc *request, IOUSBCompletion *completion = 0); /*! @function GetConfiguration Gets the current configuration from the IOUSBDevice object. Note that this call will send a control request on the bus to get the current configuration from the physical device. @param configNum Pointer to place to store configuration value. */ virtual IOReturn GetConfiguration(UInt8 *configNumber); /*! @function GetDeviceStatus Gets the device's status. Note that this sends a control request to the physical device. @param status Pointer to place to store the status. */ virtual IOReturn GetDeviceStatus(USBStatus *status); /*! @function GetStringDescriptor Get a string descriptor as ASCII, in the specified language (default is US English) @param index Index of the string descriptor to get. @param buf Pointer to place to store ASCII string @param maxLen Size of buffer pointed to by buf @param lang Language to get string in (default is US English) */ virtual IOReturn GetStringDescriptor(UInt8 index, char *buf, int maxLen, UInt16 lang=0x409); /*! @function GetChildLocationID Get the locationID (UInt32) given the port number and the parent's location @param parentLocationID locationID for the hub to which this device is attached. @param port Port number of the hub where this device is attached */ virtual UInt32 GetChildLocationID(UInt32 parentLocationID, int port); virtual const IOUSBDescriptorHeader* FindNextDescriptor(const void *cur, UInt8 descType); virtual void DisplayNotEnoughPowerNotice(); OSMetaClassDeclareReservedUsed(IOUSBDevice, 0); /*! @function DeviceRequest @abstract execute a control request to the default control pipe (pipe zero) @param request The parameter block to send to the device @param noDataTimeout Specifies an amount of time (in ms) after which the command will be aborted if no data has been transferred on the bus. @param completionTimeout Specifies an amount of time (in ms) after which the command will be aborted if the entire command has not been completed. @param completion Function to call when request completes. If omitted then DeviceRequest() executes synchronously, blocking until the request is complete. */ virtual IOReturn DeviceRequest(IOUSBDevRequest *request, UInt32 noDataTimeout, UInt32 completionTimeout, IOUSBCompletion *completion = 0); // Same but with a memory descriptor OSMetaClassDeclareReservedUsed(IOUSBDevice, 1); virtual IOReturn DeviceRequest(IOUSBDevRequestDesc *request, UInt32 noDataTimeout, UInt32 completionTimeout, IOUSBCompletion *completion = 0); OSMetaClassDeclareReservedUsed(IOUSBDevice, 2); /*! @function SuspendDevice @abstract Instruct the hub to which this device is attached to suspend or resume the port to which the device is attached. Note that if there are any outstanding transactions on any pipes in the device, those transactions will get returned with a kIOReturnNotResponding error. @param suspend Boolean value. true = suspend, false = resume. */ virtual IOReturn SuspendDevice( bool suspend); OSMetaClassDeclareReservedUsed(IOUSBDevice, 3); /*! @function ReEnumerateDevice @abstract Instruct the hub to which this device is attached to reset the port to which this device is attached. This causes the IOUSBDevice object and any child objects (IOUSBInterface objects or driver objects) to be terminated, and the device to be completely reenumerated, as if it had been detached and reattached. @param options Reserved for future use. */ virtual IOReturn ReEnumerateDevice( UInt32 options ); OSMetaClassDeclareReservedUnused(IOUSBDevice, 4); OSMetaClassDeclareReservedUnused(IOUSBDevice, 5); OSMetaClassDeclareReservedUnused(IOUSBDevice, 6); OSMetaClassDeclareReservedUnused(IOUSBDevice, 7); OSMetaClassDeclareReservedUnused(IOUSBDevice, 8); OSMetaClassDeclareReservedUnused(IOUSBDevice, 9); OSMetaClassDeclareReservedUnused(IOUSBDevice, 10); OSMetaClassDeclareReservedUnused(IOUSBDevice, 11); OSMetaClassDeclareReservedUnused(IOUSBDevice, 12); OSMetaClassDeclareReservedUnused(IOUSBDevice, 13); OSMetaClassDeclareReservedUnused(IOUSBDevice, 14); OSMetaClassDeclareReservedUnused(IOUSBDevice, 15); OSMetaClassDeclareReservedUnused(IOUSBDevice, 16); OSMetaClassDeclareReservedUnused(IOUSBDevice, 17); OSMetaClassDeclareReservedUnused(IOUSBDevice, 18); OSMetaClassDeclareReservedUnused(IOUSBDevice, 19); private: static void ProcessPortResetEntry(OSObject *target); void ProcessPortReset(void); void TerminateInterfaces(void); static void ProcessPortSuspendEntry(OSObject *target, thread_call_param_t suspend); void ProcessPortSuspend( bool suspend); static void ProcessPortReEnumerateEntry(OSObject *target, thread_call_param_t options); void ProcessPortReEnumerate(UInt32 options); }; #endif /* _IOKIT_IOUSBDEVICE_H */