Makefile   [plain text]

#
# Copyright (c) 2009 Apple, Inc.
#
# Wrapper Makefile for ChatServer
#
# ChatServer consists of two main packages: jabberd2 and libidn.  The libidn
# package in built and installed into a temporary location prior to configuring
# jabberd2.  There is no install target for libidn -- only jabberd2 installs 
# any files in the system.
#

# These includes provide the proper paths to system utilities
include $(MAKEFILEPATH)/pb_makefiles/platform.make
include $(MAKEFILEPATH)/pb_makefiles/commands-$(OS).make

#
# Special variables for make targets
#
# The temporary libidn folder structure is created as follows:
#    $(OBJROOT)/
#        libidn.build/
#            src/
#                ppc/
#                i386/
#                ...
#            lib/
#                ppc/
#                i386/ 
#                ...
#            include/
# NOTE: Since the value of $(OBJROOT) varies depending on whether ~rc/bin/buildit
#       is invoked or make from the ChatServer2 directory, the location of the 
#       libidn temp directories will vary accordinly.  As additional architectures
#       are added to the Makefile, additional sub-folders will be created under 
#       src/ and lib/ as needed.
#
PROJECT_NAME	= ChatServer

# STAGING DIR
#
# As of the current release, jabberd2 and certain other package sources are build
# into a "staging" directory, which contains all the build products, but is not
# organized in the final intallation structure.  The contents of STAGING_DIR
# will be copied in the install phase (see below) to create the structure that
# will exists when Mac OS X Server is intalled.
STAGING_DIR 	:= staging

# common root directories with absolute paths
SQLITE_LIB_DIR	= /usr/lib
SQLITE_INCLUDE_DIR	= /usr/include
BUILD_DIR	= /usr
PKG_CONFIG_EXEC = /usr/local/bin/pkg-config

# common directories with relative paths (may be contained inside build directories)
ETC_DIR	= private/etc
VAR_DIR=private/var
USRBIN_DIR=usr/bin
USRLIB_DIR=usr/lib
USRLOCAL_DIR=usr/local
USRSHARE_DIR=usr/share
LIBEXEC_DIR=usr/libexec
SYSCONFIG_DIR	= etc
MAN_DIR	= usr/share/man
INFO_DIR	= usr/share/info
MIGRATION_EXTRAS_DIR	= System/Library/ServerSetup/MigrationExtras
MODULES_DIR=usr/lib/jabberd

# project directories and tools used while building, relative to the source root
TOOLS_DIR=tools
OPENSOURCE_PKG_DIR=opensource_pkgs
JABBERD_PATCH_TOOL=$(TOOLS_DIR)/patch_jabberd.pl
JABBERD_DIST_TAR=$(OPENSOURCE_PKG_DIR)/jabberd-2.1.24.1.tar.bz2
PATCH_DIR=apple_patch
PATCH_DIR_PRECONF=$(PATCH_DIR)/pre_configure
PATCH_DIR_POSTCONF=$(PATCH_DIR)/post_configure

# tool path defines
INSTALL		= /usr/bin/install
DITTO		= /usr/bin/ditto
TAR		= /usr/bin/tar
GZIP		= /usr/bin/gzip
MKDIR		= /bin/mkdir
PATCH		=/usr/bin/patch
GCC		=/usr/bin/gcc
LS		=/bin/ls
APPLELIBTOOL		=/usr/bin/libtool
FIND		=/usr/bin/find

# Set up BUILD_ARCHS.  If ARCHS were passed in, reorder them for glib-genmarshal (see later note).
ifdef ARCHS
	BUILD_ARCHS	:= $(BUILD_ARCHS) $(findstring ppc,$(ARCHS))
	BUILD_ARCHS	:= $(BUILD_ARCHS) $(findstring i386,$(ARCHS))
	BUILD_ARCHS	:= $(BUILD_ARCHS) $(findstring x86_64,$(ARCHS))
else 
	BUILD_ARCHS	= ppc i386 x86_64
endif
ARCH_SAYS := $(shell /usr/bin/arch)
SYSCTL_SAYS := $(shell /usr/sbin/sysctl -n hw.optional.x86_64)

ifeq (i386,$(ARCH_SAYS))
	ifeq (1,$(SYSCTL_SAYS))
		BUILD_ARCH := x86_64
	else
		BUILD_ARCH := i386
	endif
else
ifeq (ppc,$(ARCH_SAYS))
	BUILD_ARCH := ppc
else
	BUILD_ARCH := $(ARCH_SAYS)
endif
endif

# $(warning DEBUG: $(BUILD_ARCHS))

#-------------------------------
# Define the default build rule
#-------------------------------
#
default: build


#-------------------------------
# LIBIDN MODULE
#-------------------------------
#
# NOTE: There is no install target for libidn.  It's make output is copied 
#       to $(OBJROOT)/$(LIBIDN_BUILD_DIR) so that the jabberd2 target and
#       mu-conference target statically link against the library during the build, 
#       but the intermediate build results are discarded after the build completes.
#
# DIRECTORIES:
#       Sources:
#          tar output: $(SRCROOT)/$(LIBIDN_NAME)/
#          make sources (ppc): $(OBJROOT)/$(LIBIDN_SRC_DIR)/ppc/
#          make sources (i386): $(OBJROOT)/$(LIBIDN_SRC_DIR)/i386/
#       Build Products:
#          libraries (ppc): $(OBJROOT)/$(LIBIDN_LIB_DIR)/ppc/
#          libraries (i386): $(OBJROOT)/$(LIBIDN_LIB_DIR)/i386/
#          libraries (universal): $(OBJROOT)/$(LIBIDN_LIB_DIR)/
#          includes (universal): $(OBJROOT)/$(LIBIDN_INCLUDE_DIR)/
#
LIBIDN_VERSION	= libidn-0.6.14
LIBIDN_NAME	= libidn
LIBIDN_A	= libidn.a

LIBIDN_BUILD_DIR	:= libidn.build
LIBIDN_SRC_DIR	:= $(LIBIDN_BUILD_DIR)/src
LIBIDN_LIB_DIR	:= $(LIBIDN_BUILD_DIR)/lib
LIBIDN_INCLUDE_DIR	:= $(LIBIDN_BUILD_DIR)/include

LIBIDN_ARCHS	:= $(BUILD_ARCHS)

# libidn build rules
#

.PHONY: libidn/untar libidn/build libidn/build-lib libidn/clean libidn/cleanobj libidn/clean-all

$(LIBIDN_NAME): $(OBJROOT)
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: UNPACKING"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(LIBIDN_SRC_DIR); $(MKDIR) -p -m 755 $(OBJROOT)/$(LIBIDN_SRC_DIR)
	for i in $(LIBIDN_ARCHS) ; do \
		$(SILENT) $(CD) $(OBJROOT)/$(LIBIDN_SRC_DIR); $(TAR) -xzf $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/$(LIBIDN_VERSION).tgz; $(MV) $(LIBIDN_VERSION) $$i; \
	done

libidn/untar: $(LIBIDN_NAME)

$(LIBIDN_NAME)/config.status: libidn/untar
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: CONFIGURING"
	@echo "#"
	for i in $(LIBIDN_ARCHS) ; do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: ...configuring; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(LIBIDN_SRC_DIR)/$$i; env VALGRIND="/usr/bin/false" ./configure --prefix=$(BUILD_DIR) --build=$(BUILD_ARCH)-apple-darwin --host=$$i-apple-darwin CFLAGS="$(CFLAGS) -arch $$i"; \
	done

$(LIBIDN_NAME)/lib/.libs/libidn.dylib:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: BUILDING"
	@echo "#"
	for i in $(LIBIDN_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: ...building; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(LIBIDN_SRC_DIR)/$$i; make; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: INSTALLING"
	@echo "#"
	for i in $(LIBIDN_ARCHS) ; do \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: ...installing - caching make results: libs; arch=$$i"; \
		$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(LIBIDN_INCLUDE_DIR)/$$i; \
		$(SILENT) $(DITTO) $(OBJROOT)/$(LIBIDN_SRC_DIR)/$$i/lib/.libs/ $(OBJROOT)/$(LIBIDN_LIB_DIR)/$$i/; \
	done
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: ...installing - caching make results: includes"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(LIBIDN_INCLUDE_DIR)
	$(SILENT) $(DITTO) $(OBJROOT)/$(LIBIDN_SRC_DIR)/$(firstword $(LIBIDN_ARCHS))/lib/*.h $(OBJROOT)/$(LIBIDN_INCLUDE_DIR)/
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: ...installing - creating univeral library"
	$(SILENT) $(LIPO) -create \
		$(foreach arch, $(LIBIDN_ARCHS), -arch $(arch) $(OBJROOT)/$(LIBIDN_LIB_DIR)/$(arch)/$(LIBIDN_A) ) \
		-output $(OBJROOT)/$(LIBIDN_LIB_DIR)/$(LIBIDN_A)
	$(SILENT) $(LIPO) -info $(OBJROOT)/$(LIBIDN_LIB_DIR)/$(LIBIDN_A)

libidn/build: $(LIBIDN_NAME)/config.status $(LIBIDN_NAME)/lib/.libs/libidn.dylib

libidn/clean:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: cleaning sources"
	@echo "#"
	$(SILENT) $(RM) -rf $(LIBIDN_VERSION) $(LIBIDN_NAME) $(OBJROOT)/$(LIBIDN_BUILD_DIR)
	$(SILENT) $(TAR) -xzf $(OPENSOURCE_PKG_DIR)/$(LIBIDN_VERSION).tgz; $(MV) $(LIBIDN_VERSION) $(LIBIDN_NAME)

libidn/cleanobj:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: cleaning objects"
	@echo "#"
	for i in $(LIBIDN_ARCHS) ; do \
		$(SILENT) $(CD) $(OBJROOT)/$(LIBIDN_SRC_DIR)/$$i; make clean; \
	done

libidn/clean-all:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [libidn]: cleaning ALL"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(LIBIDN_BUILD_DIR)


#-------------------------------
# PKG-CONFIG MODULE
#-------------------------------
#
# NOTE: There is no install target for pkg-config.  It's make output is copied 
#       to $(OBJROOT)/$(PKG_CONFIG_BUILD_DIR) so that the mu-conference target can 
#       use the binary during the build, but the intermediate build results are 
#       discarded after the build completes.
#
# DIRECTORIES:
#       Sources:
#          tar output: $(SRCROOT)/$(PKG_CONFIG_NAME)/
#          make sources (ppc): $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)/ppc/
#          make sources (i386): $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)/i386/
#       Build Products:
#          tool (ppc): $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/ppc/
#          tool (i386): $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/i386/
#          tool (universal): $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/
#

PKG_CONFIG_VERSION	= pkg-config-0.23
PKG_CONFIG_NAME	= pkg-config

PKG_CONFIG_BUILD_DIR	:= pkg-config.build
PKG_CONFIG_SRC_DIR	:= $(PKG_CONFIG_BUILD_DIR)/src
PKG_CONFIG_BIN_DIR	:= $(PKG_CONFIG_BUILD_DIR)/bin

PKG_CONFIG_ARCHS	:= $(BUILD_ARCHS)

# pkg-config build rules
#

.PHONY: pkg-config/untar pkg-config/build pkg-config/clean pkg-config/cleanobj pkg-config/clean-all

$(PKG_CONFIG_NAME): $(OBJROOT)
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: UNPACKING"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(PKG_CONFIG_SRC_DIR); $(MKDIR) -p -m 755 $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)
	for i in $(PKG_CONFIG_ARCHS) ; do \
		$(SILENT) $(CD) $(OBJROOT)/$(PKG_CONFIG_SRC_DIR); $(TAR) -xzf $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/$(PKG_CONFIG_VERSION).tgz; $(MV) $(PKG_CONFIG_VERSION) $$i; \
	done

pkg-config/untar: $(PKG_CONFIG_NAME)

$(PKG_CONFIG_NAME)/config.status: pkg-config/untar
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: CONFIGURING"
	@echo "#"
	for i in $(PKG_CONFIG_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: ...configuring; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)/$$i; ./configure --prefix=$(BUILD_DIR) --target=$$i-apple-darwin CFLAGS="$(CFLAGS) -arch $$i"; \
	done

$(PKG_CONFIG_NAME)/pkg-config: $(PKG_CONFIG_NAME)/config.status
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: BUILDING"
	@echo "#"
	for i in $(PKG_CONFIG_ARCHS); do \
		$(SILENT) $(ECHO)  "#"; \
		$(SILENT) $(ECHO)  "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: ...building; arch=$$i"; \
		$(SILENT) $(ECHO)  "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)/$$i; make; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: INSTALLING"
	@echo "#"
	for i in $(PKG_CONFIG_ARCHS); do \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: ...installing - caching make results; arch=$$i"; \
		$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/$$i; \
		$(SILENT) $(DITTO) $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)/$$i/pkg-config $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/$$i/; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: ...installing - creating univeral library"
	@echo "#"
	$(SILENT) $(LIPO) -create \
		$(foreach arch, $(PKG_CONFIG_ARCHS), -arch $(arch) $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/$(arch)/pkg-config )  \
		-output $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/pkg-config
	$(SILENT) $(LIPO) -info $(OBJROOT)/$(PKG_CONFIG_BIN_DIR)/pkg-config

pkg-config/build: $(PKG_CONFIG_NAME)/config.status $(PKG_CONFIG_NAME)/pkg-config

pkg-config/clean:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: cleaning sources"
	@echo "#"
	$(SILENT) $(RM) -rf $(PKG_CONFIG_VERSION) $(PKG_CONFIG_NAME) $(OBJROOT)/$(PKG_CONFIG_BUILD_DIR)
	$(SILENT) $(TAR) -xzf $(OPENSOURCE_PKG_DIR)/$(PKG_CONFIG_VERSION).tgz; $(MV) $(PKG_CONFIG_VERSION) $(PKG_CONFIG_NAME)

pkg-config/cleanobj:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: cleaning objects"
	@echo "#"
	for i in $(PKG_CONFIG_ARCHS) ; do \
		$(SILENT) $(CD) $(OBJROOT)/$(PKG_CONFIG_SRC_DIR)/$$i; make clean; \
	done

pkg-config/clean-all:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [pkg-config]: cleaning ALL"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(PKG_CONFIG_BUILD_DIR)


#-------------------------------
# GETTEXT MODULE
#-------------------------------
#
# NOTE: There is no install target for gettext.  It's make output is copied 
#       to $(OBJROOT)/$(GETTEXT_BUILD_DIR) so that the mu-conference target can 
#       use the binary during the build, but the intermediate build results are 
#       discarded after the build completes.
#
# DIRECTORIES:
#       Sources:
#          tar output: $(SRCROOT)/$(GETTEXT_NAME)/
#          make sources (ppc): $(OBJROOT)/$(GETTEXT_SRC_DIR)/ppc/
#          make sources (i386): $(OBJROOT)/$(GETTEXT_SRC_DIR)/i386/
#       Build Products:
#          /usr/bin/* (ppc): $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/ppc/$(USRBIN_DIR)
#          /usr/bin/* (i386): $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/i386/$(USRBIN_DIR)
#          /usr/bin/* (universal): $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR)
#          /usr/lib/* (ppc): $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/ppc/$(USRLIB_DIR)
#          /usr/lib/* (i386): $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/i386/$(USRLIB_DIR)
#          /usr/lib/* (universal): $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR)
#

GETTEXT_VERSION	= gettext-0.16.1
GETTEXT_NAME	= gettext

GETTEXT_BUILD_DIR	:= gettext.build
GETTEXT_SRC_DIR	:= $(GETTEXT_BUILD_DIR)/src
GETTEXT_INSTALL_DIR	:= $(GETTEXT_BUILD_DIR)/install

# GETTEXT_BIN_FILES_TO_LIPO  List of all thin binaries that need to be lipo'd 
#                            into universal binaries for the gettext component.
GETTEXT_BIN_FILES_TO_LIPO	= \
envsubst \
gettext \
msgattrib \
msgcat \
msgcmp \
msgcomm \
msgconv \
msgen \
msgexec \
msgfilter \
msgfmt \
msggrep \
msginit \
msgmerge \
msgunfmt \
msguniq \
ngettext \
recode-sr-latin \
xgettext

# GETTEXT_LIB_FILES_TO_LIPO  List of all thin binaries that need to be lipo'd 
#                            into universal binaries for the gettext component.
GETTEXT_LIB_FILES_TO_LIPO	= \
libasprintf.a \
libgettextpo.a \
libintl.a \
$(GETTEXT_NAME)/hostname \
$(GETTEXT_NAME)/urlget

GETTEXT_ARCHS	:= $(BUILD_ARCHS)

# gettext build rules
#
.PHONY: gettext/untar gettext/build gettext/clean gettext/cleanobj gettext/clean-all

$(GETTEXT_NAME): $(OBJROOT)
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: UNPACKING"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(GETTEXT_SRC_DIR); $(MKDIR) -p -m 755 $(OBJROOT)/$(GETTEXT_SRC_DIR)
	for i in $(GETTEXT_ARCHS) ; do \
		$(SILENT) $(CD) $(OBJROOT)/$(GETTEXT_SRC_DIR); $(TAR) -xzf $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/$(GETTEXT_VERSION).tgz; $(MV) $(GETTEXT_VERSION) $$i; \
	done

gettext/untar: $(GETTEXT_NAME)

$(GETTEXT_NAME)/config.status: gettext/untar
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: CONFIGURING"
	@echo "#"
	for i in $(GETTEXT_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...configuring; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...configuring - patching $(OBJROOT)/$(GETTEXT_SRC_DIR)/$$i/gettext-tools/misc/Makefile.in; arch=$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(GETTEXT_SRC_DIR)/$$i/gettext-tools/misc; $(CP) Makefile.in Makefile.in.bak; $(PATCH) -u Makefile.in $(SRCROOT)/$(PATCH_DIR_PRECONF)/gettext/gettext-tools/misc/Makefile.in.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(GETTEXT_SRC_DIR)/$$i; ./configure --prefix=$(BUILD_DIR) --build=$(BUILD_ARCH)-apple-darwin --host=$$i-apple-darwin --disable-shared CFLAGS="$(CFLAGS) -arch $$i" CPPFLAGS="$(CPPFLAGS) -arch $$i" LDFLAGS="$(LDFLAGS) -arch $$i"; \
	done

$(GETTEXT_NAME)/gettext:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: BUILDING"
	@echo "#"
	for i in $(GETTEXT_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...building; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(GETTEXT_SRC_DIR)/$$i; make; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...building - caching make results; arch=$$i"; \
		$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$$i; \
		$(SILENT) $(CD) $(OBJROOT)/$(GETTEXT_SRC_DIR)/$$i; make install DESTDIR=$(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$$i; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...building - creating universal binaries"
	@echo "#"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR)
	for i in $(GETTEXT_BIN_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(GETTEXT_ARCHS), -arch $(arch) $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(arch)/$(USRBIN_DIR)/$$i ) \
			-output $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
		$(SILENT) $(STRIP) $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR)/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...building - creating universal libraries"
	@echo "#"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR)/gettext
	for i in $(GETTEXT_LIB_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR)/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(GETTEXT_ARCHS), -arch $(arch) $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(arch)/$(USRLIB_DIR)/$$i ) \
			-output $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR)/$$i; \
		$(SILENT) $(STRIP) $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR)/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR)/$$i; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: ...building - caching includes"
	@echo "#"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/usr
	$(SILENT) $(DITTO) $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(firstword $(GETTEXT_ARCHS))/usr/include $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/usr/include

gettext/build: $(GETTEXT_NAME)/config.status $(GETTEXT_NAME)/gettext

gettext/clean:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: cleaning sources"
	@echo "#"
	$(SILENT) $(RM) -rf $(GETTEXT_VERSION) $(GETTEXT_NAME) $(OBJROOT)/$(GETTEXT_BUILD_DIR)
	$(SILENT) $(TAR) -xzf $(OPENSOURCE_PKG_DIR)/$(GETTEXT_VERSION).tgz; $(MV) $(GETTEXT_VERSION) $(GETTEXT_NAME)

gettext/cleanobj:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: cleaning objects"
	@echo "#"
	for i in $(GETTEXT_ARCHS) ; do \
		$(SILENT) $(CD) $(OBJROOT)/$(GETTEXT_SRC_DIR)/$$i; make clean; \
	done

gettext/clean-all:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [gettext]: cleaning ALL"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(GETTEXT_BUILD_DIR)


#-------------------------------
# GLIB MODULE
#-------------------------------
#
# NOTE: There is no install target for glib.  It's make output is copied 
#       to $(OBJROOT)/$(GLIB_BUILD_DIR) so that the mu-conference target can 
#       use the library during the build, but the intermediate build results are 
#       discarded after the build completes.
#
# DIRECTORIES:
#       Sources:
#          tar output: $(SRCROOT)/$(GLIB_NAME)/
#          make sources (ppc): $(OBJROOT)/$(GLIB_SRC_DIR)/ppc/
#          make sources (i386): $(OBJROOT)/$(GLIB_SRC_DIR)/i386/
#       Build Products:
#          /usr/lib/* (ppc): $(OBJROOT)/$(GLIB_INSTALL_DIR)/ppc/$(USRLIB_DIR)
#          /usr/lib/* (i386): $(OBJROOT)/$(GLIB_INSTALL_DIR)/i386/$(USRLIB_DIR)
#          /usr/lib/* (universal): $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)
#

GLIB_VERSION	= glib-2.16.6
GLIB_NAME	= glib

GLIB_BUILD_DIR	:= glib.build
GLIB_SRC_DIR	:= $(GLIB_BUILD_DIR)/src
GLIB_INSTALL_DIR	:= $(GLIB_BUILD_DIR)/install

# GLIB_BIN_FILES_TO_LIPO  List of all thin binaries that need to be lipo'd 
#                         into universal binaries for the glib component.
GLIB_BIN_FILES_TO_LIPO	= \
glib-genmarshal \
gobject-query

# GLIB_LIB_FILES_TO_LIPO  List of all thin libraries that need to be lipo'd 
#                         into universal libraries for the glib component.
GLIB_LIB_FILES_TO_LIPO	= \
libglib-2.0.a \
libgmodule-2.0.a \
libgobject-2.0.a \
libgthread-2.0.a

# GLIB_PC_FILES_TO_COPY   List of all glib library .pc to be copied into the
#                         /usr/lib directory for the glib component.
GLIB_PC_FILES_TO_COPY	= \
glib-2.0.pc \
gmodule-2.0.pc \
gobject-2.0.pc \
gthread-2.0.pc

GLIB_CONFIG_CFLAGS := -I$(OBJROOT)/$(GETTEXT_INSTALL_DIR)/usr/include
GLIB_CONFIG_LDFLAGS := -L$(OBJROOT)/$(GETTEXT_INSTALL_DIR)/usr/lib -L/System/Library/Frameworks/CoreFoundation.framework -L/usr/lib -framework CoreServices

GLIB_MAKE_CPPFLAGS := $(GLIB_CONFIG_CFLAGS)
GLIB_MAKE_CFLAGS := $(GLIB_CONFIG_CFLAGS)
GLIB_MAKE_LDLAGS := $(GLIB_CONFIG_LDFLAGS)

GLIB_ARCHS := $(BUILD_ARCHS)

export PATH := $(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRBIN_DIR):$(OBJROOT)/$(PKG_CONFIG_BIN_DIR):/usr/local/bin:$(PATH)

# glib build rules
#
.PHONY: glib/untar glib/build glib/clean glib/cleanobj glib/clean-all

$(GLIB_NAME): $(OBJROOT)
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: UNPACKING"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(GLIB_SRC_DIR); $(MKDIR) -p -m 755 $(OBJROOT)/$(GLIB_SRC_DIR)
	for i in $(GLIB_ARCHS); do \
		$(SILENT) $(CD) $(OBJROOT)/$(GLIB_SRC_DIR); $(TAR) -xzf $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/$(GLIB_VERSION).tgz; $(MV) $(GLIB_VERSION) $$i ;\
	done

glib/untar: $(GLIB_NAME)

# A NOTE ABOUT GLIB-GENMARSHAL:
#    Note that the GLIB_GENMARSHAL variable is always set to the path of the ppc version 
#    of the glib-genmarshal. The reason for this is due to limitations in cross-compiling
#    on PowerPC - i.e. when cross-compiling on ppc for i386, make cannot execute the 
#    i386 version of the tool, HOWEVER, thanks to Rosetta, cross-compiling on i386 for ppc,
#    make is able to run the ppc version of the tool.
#
# IMPORTANT: 
#    Because of the above glib-genmarshal restriction, building the glib target on a ppc host 
#    requires that the ppc architecture must always be built BEFORE the i386 architecture.
#
$(GLIB_NAME)/config.status: glib/untar
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: CONFIGURING"
	@echo "#"
	for i in $(GLIB_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...configuring; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(GLIB_SRC_DIR)/$$i; \
		$(SILENT) $(CP) $(SRCROOT)/config_cache/glib/$$i/config.cache $(OBJROOT)/$(GLIB_SRC_DIR)/$$i/config.cache; \
		env CFLAGS="-arch $$i $(GLIB_CONFIG_CFLAGS)" \
		    CPPFLAGS="-arch $$i $(GLIB_CONFIG_CFLAGS)" \
			LDFLAGS="-arch $$i $(GLIB_CONFIG_LDFLAGS)" \
			GLIB_GENMARSHAL="$(OBJROOT)/$(GLIB_SRC_DIR)/$(firstword $(GLIB_ARCHS))/gobject/glib-genmarshal" \
		./configure --prefix=$(BUILD_DIR) --build=$(BUILD_ARCH)-apple-darwin --host=$$i-apple-darwin --enable-static --disable-shared --with-libiconv=native --config-cache CFLAGS="$(CFLAGS) -arch $$i"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...configuring - patching $(OBJROOT)/$(GLIB_SRC_DIR)/$$i/config.h; arch=$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(GLIB_SRC_DIR)/$$i; $(CP) config.h config.h.bak; $(PATCH) -u config.h $(SRCROOT)/$(PATCH_DIR_POSTCONF)/glib/$$i/config_h.patch; \
	done

$(GLIB_NAME)/glib:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: BUILDING"
	@echo "#"
	for i in $(GLIB_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...building; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(GLIB_SRC_DIR)/$$i; \
		env CPPFLAGS="-arch $$i $(GLIB_MAKE_CPPFLAGS)" \
	         CFLAGS="-arch $$i $(GLIB_MAKE_CFLAGS)" \
		     LDFLAGS="-arch $$i $(GLIB_MAKE_LDLAGS)" \
		make; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: INSTALLING"
	@echo "#"
	for i in $(GLIB_ARCHS); do \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...installing - caching make results; arch=$$i"; \
		$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GLIB_INSTALL_DIR)/$$i; \
		$(SILENT) $(CD) $(OBJROOT)/$(GLIB_SRC_DIR)/$$i; make install DESTDIR=$(OBJROOT)/$(GLIB_INSTALL_DIR)/$$i; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...installing - creating universal binaries"
	@echo "#"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRBIN_DIR)
	for i in $(GLIB_BIN_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(GLIB_ARCHS), -arch $(arch) $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(arch)/$(USRBIN_DIR)/$$i ) \
			-output $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
		$(SILENT) $(STRIP) $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRBIN_DIR)/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
	done
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)
	for i in $(GLIB_LIB_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(GLIB_ARCHS), -arch $(arch) $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(arch)/$(USRLIB_DIR)/$$i ) \
			-output $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)/$$i; \
		$(SILENT) $(STRIP) $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)/$$i; \
	done
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...installing - copying .pc files"
	@echo "#"
	for i in $(GLIB_PC_FILES_TO_COPY); do \
		$(SILENT) $(CP) $(OBJROOT)/$(GLIB_SRC_DIR)/$(firstword $(GLIB_ARCHS))/$$i $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)/; \
	done
	$(SILENT) $(LS) -l $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR)/*.pc
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: ...installing - caching includes"
	@echo "#"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(GLIB_INSTALL_DIR)/usr
	$(SILENT) $(DITTO) $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(firstword $(GLIB_ARCHS))/usr/include $(OBJROOT)/$(GLIB_INSTALL_DIR)/usr/include

glib/build: $(GLIB_NAME)/config.status $(GLIB_NAME)/glib

glib/clean:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: cleaning sources"
	@echo "#"
	$(SILENT) $(RM) -rf $(GLIB_VERSION) $(GLIB_NAME) $(OBJROOT)/$(GLIB_BUILD_DIR)
	$(SILENT) $(TAR) -xzf $(OPENSOURCE_PKG_DIR)/$(GLIB_VERSION).tgz; $(MV) $(GLIB_VERSION) $(GLIB_NAME)

glib/cleanobj:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: cleaning objects"
	@echo "#"
	for i in $(GLIB_ARCHS); do \
		$(SILENT) $(CD) $(OBJROOT)/$(GLIB_SRC_DIR)/$$i; make clean; \
	done

glib/clean-all:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [glib]: cleaning ALL"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(GLIB_BUILD_DIR)


#-------------------------------
# MU-CONFERENCE MODULE
#-------------------------------
#
# NOTE: The mu-conference module is a libary that is installed in (WHERE?).  
#       During the muc/build phase, the make output is copied to 
#       $(OBJROOT)/$(MUC_BUILD_DIR) in preparation for final installation.
#
# DIRECTORIES:
#       Sources:
#          tar output: $(SRCROOT)/$(MUC_NAME)/
#          make sources (ppc): $(OBJROOT)/$(MUC_SRC_DIR)/ppc/
#          make sources (i386): $(OBJROOT)/$(MUC_SRC_DIR)/i386/
#       Build Products:
#          /usr/lib/* (ppc): $(OBJROOT)/$(MUC_INSTALL_DIR)/ppc/$(USRLIB_DIR)
#          /usr/lib/* (i386): $(OBJROOT)/$(MUC_INSTALL_DIR)/i386/$(USRLIB_DIR)
#          /usr/lib/* (universal): $(OBJROOT)/$(MUC_INSTALL_DIR)/$(USRLIB_DIR)
#

MUC_VERSION	= mu-conference_0.8
MUC_NAME	= mu-conference

MUC_BUILD_DIR	:= mu-conference.build
MUC_SRC_DIR	:= $(MUC_BUILD_DIR)/src
MUC_INSTALL_DIR	:= $(MUC_BUILD_DIR)/install

# MUC_BIN_FILES_TO_LIPO  List of all thin binaries that need to be lipo'd 
#                         into universal binaries for the glib component.
MUC_BIN_FILES_TO_LIPO	= mu-conference

# MUC_LIB_FILES_TO_LIPO  List of all thin libraries that need to be lipo'd 
#                         into universal libraries for the glib component.
MUC_LIB_FILES_TO_LIPO	= \
libglib-2.0.a \
libgmodule-2.0.a \
libgobject-2.0.a \
libgthread-2.0.a

MUC_ARCHS := $(BUILD_ARCHS)

MUC_MAKE_CFLAGS := -I$(OBJROOT)/$(GLIB_INSTALL_DIR)/usr/include/glib-2.0/glib \
                   -I$(OBJROOT)/$(GLIB_INSTALL_DIR)/usr/include/glib-2.0 \
                   -I$(OBJROOT)/$(GLIB_SRC_DIR)/$(firstword $(MUC_ARCHS)) \
                   -I$(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/include \
                   -I$(OBJROOT)/$(LIBIDN_INCLUDE_DIR) \
                   -DLIBIDN \
                   -g
MUC_MAKE_LDFLAGS := -L$(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR) -L$(OBJROOT)/$(GETTEXT_INSTALL_DIR)/$(USRLIB_DIR) -L$(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src -L$(OBJROOT)/$(LIBIDN_LIB_DIR) -framework CoreFoundation -framework CoreServices
MUC_MAKE_PKG_CONFIG_PATH := $(OBJROOT)/$(GLIB_INSTALL_DIR)/$(USRLIB_DIR):$(PATH)

# mu-conference build rules
#
.PHONY: muc/untar muc/install muc/build muc/clean muc/cleanobj muc/clean-all

$(MUC_NAME): $(OBJROOT)
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: UNPACKING"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(MUC_SRC_DIR)
	for i in $(MUC_ARCHS); do \
		$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(MUC_SRC_DIR)/$$i; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i; $(TAR) -xzf $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/$(MUC_VERSION).tgz; $(MV) $(MUC_VERSION) $(MUC_NAME); $(CHOWN) -R $(USER):$(GROUP) $(MUC_NAME); \
	done

muc/untar: $(MUC_NAME)

muc/muc:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: BUILDING"
	@echo "#"
	for i in $(MUC_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: ...patching; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src; $(CP) conference_room.c conference_room.c.bak; $(PATCH) -u conference_room.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/conference_room.c.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src; $(CP) main.c main.c.bak; $(PATCH) -u main.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/main.c.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src/jcomp; $(CP) jcr_deliver.c jcr_deliver.c.bak; $(PATCH) -u jcr_deliver.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/jcomp/jcr_deliver.c.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src/jcomp; $(CP) jcr_main_stream_error.c jcr_main_stream_error.c.bak; $(PATCH) -u jcr_main_stream_error.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/jcomp/jcr_main_stream_error.c.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src/jcomp; $(CP) jcr_shutdown.c jcr_shutdown.c.bak; $(PATCH) -u jcr_shutdown.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/jcomp/jcr_shutdown.c.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src/jcomp; $(CP) jcr_elements.c jcr_elements.c.bak; $(PATCH) -u jcr_elements.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/jcomp/jcr_elements.c.patch; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src; $(CP) conference.c conference.c.bak; $(PATCH) -u conference.c $(SRCROOT)/$(PATCH_DIR_PRECONF)/mu-conference/src/conference.c.patch; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: ...building; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i/$(MUC_NAME)/src; \
		make PKG_CONFIG_PATH=$(MUC_MAKE_PKG_CONFIG_PATH) \
		                 CFLAGS="-arch $$i $(MUC_MAKE_CFLAGS)" \
		                 LDFLAGS="-arch $$i $(MUC_MAKE_LDFLAGS)"; \
	done

muc/install:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: INSTALLING"
	@echo "#"
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: ...installing - creating universal binaries"
	@echo "#"
	$(SILENT) $(MKDIR) -p -m 777  $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)
	for i in $(MUC_BIN_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(MUC_ARCHS), -arch $(arch) $(OBJROOT)/$(MUC_SRC_DIR)/$(arch)/$(JCR_NAME)/$(MUC_NAME)/src/$$i ) \
			-output $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)/$$i; \
		$(SILENT) $(CP) $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)/$$i $(SYMROOT)/ > /dev/null 2>&1; \
		$(SILENT) $(STRIP) $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)/$$i; \
	done

muc/build: muc/untar muc/muc muc/install

muc/clean:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: cleaning sources"
	@echo "#"
	$(SILENT) $(RM) -rf $(MUC_VERSION) $(MUC_NAME) $(OBJROOT)/$(MUC_BUILD_DIR)
	$(SILENT) $(TAR) -xzf $(OPENSOURCE_PKG_DIR)/$(MUC_VERSION).tgz; $(MV) $(MUC_VERSION) $(MUC_NAME)

muc/cleanobj:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: cleaning objects"
	@echo "#"
	for i in $(MUC_ARCHS); do \
		$(SILENT) $(CD) $(OBJROOT)/$(MUC_SRC_DIR)/$$i; make clean; \
	done

muc/clean-all:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [mu-conference]: cleaning ALL"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(MUC_BUILD_DIR)

#-------------------------------
# JABBER_OD_AUTH MODULE
#-------------------------------
#
# NOTE: There is no install target for jabber_od_auth.  It's make output is built 
#       into $(OBJROOT)/$(STAGING_DIR)/$(ODAUTH_LIB_DIR) so that the jabber target can 
#       use this library during it's own build phase, then discarded after the 
#       build is finished.
#
# DIRECTORIES:
#       Sources:
#          make sources (universal): $(SRCROOT)/$(ODAUTH_SRC_DIR)/
#       Build Products:
#          objects (ppc):        $(OBJROOT)/$(ODAUTH_BUILD_DIR)/ppc/
#          objects (i386):       $(OBJROOT)/$(ODAUTH_BUILD_DIR)/i386/
#          library (ppc):        $(OBJROOT)/$(ODAUTH_BUILD_DIR)/ppc/
#          library (i386):       $(OBJROOT)/$(ODAUTH_BUILD_DIR)/i386/
#          library (universal):  $(OBJROOT)/$(ODAUTH_LIB_DIR)/
#          includes (universal): $(OBJROOT)/$(ODAUTH_INCLUDE_DIR)/
#

ODAUTH_SRC_DIR	:= jabber_od_auth
ODAUTH_BUILD_DIR	:= jabber_od_auth.build
ODAUTH_LIB_DIR	:= $(ODAUTH_BUILD_DIR)/lib
ODAUTH_INCLUDE_DIR	:= $(ODAUTH_BUILD_DIR)/include

OD_AUTH_ARCHS := $(BUILD_ARCHS)

#
# od_auth/build rules
#   od_auth/build       : builds the jabber_od_auth library
#
.PHONY: od_auth/build

od_auth/build:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabber_od_auth]: BUILDING; DEST=$(OBJROOT)/$(ODAUTH_BUILD_DIR)"
	@echo "#"
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(ODAUTH_INCLUDE_DIR)
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(ODAUTH_LIB_DIR)
	$(SILENT) $(LN) -sf $(PROJECT_DIR)/$(ODAUTH_SRC_DIR)/apple_authenticate.h $(OBJROOT)/$(ODAUTH_INCLUDE_DIR)/
	$(SILENT) $(LN) -sf $(PROJECT_DIR)/$(ODAUTH_SRC_DIR)/apple_authorize.h $(OBJROOT)/$(ODAUTH_INCLUDE_DIR)/
	$(SILENT) $(LN) -sf $(PROJECT_DIR)/$(ODAUTH_SRC_DIR)/sasl_switch_hit.h $(OBJROOT)/$(ODAUTH_INCLUDE_DIR)/
	$(SILENT) $(LN) -sf $(PROJECT_DIR)/$(ODAUTH_SRC_DIR)/odkerb.h $(OBJROOT)/$(ODAUTH_INCLUDE_DIR)/
	# use best version available
	if [ -f $(OBJROOT)/UninstalledProducts/libxmppodauth.a ]; then \
	    $(SILENT) $(LN) -sf $(OBJROOT)/UninstalledProducts/libxmppodauth.a $(OBJROOT)/$(ODAUTH_LIB_DIR)/ ;\
	else \
	    $(SILENT) $(LN) -sf $(OBJROOT)/$(CONFIGURATION)/libxmppodauth.a $(OBJROOT)/$(ODAUTH_LIB_DIR)/ ;\
	fi
	$(SILENT) $(LIPO) -info $(OBJROOT)/$(ODAUTH_LIB_DIR)/libxmppodauth.a

od_auth/clean:
	$(SILENT) $(RM) -rf $(OBJROOT)/$(ODAUTH_BUILD_DIR)


#-------------------------------
# JABBERD2 MODULE
#-------------------------------
#
JABBERD2_VERSION	= jabberd-2.1.24.1-1
JABBERD2_SAVE	= jabberd2-save
JABBERD2_NAME	= jabberd2

.PHONY: jabberd2/jabberd2 jabberd2/makeinstall jabberd2/build jabberd2/clean jabberd2/cleanobj jabberd2/clean-all \
	jabberd2/extract_and_patch jabberd2/post-configure_patch

JABBERD2_BUILD_DIR 	:= jabberd2.build
JABBERD2_SRC_DIR	:= $(JABBERD2_BUILD_DIR)/src
JABBERD2_INSTALL_DIR	:= $(JABBERD2_BUILD_DIR)/install

JABBERD2_ARCHS 	:= $(BUILD_ARCHS)

JABBERD2_CONFIG_OPTS= \
		--infodir=/$(INFO_DIR) \
		--mandir=/$(MAN_DIR) \
		--sysconfdir=/$(SYSCONFIG_DIR)/jabberd \
		--disable-mysql \
		--enable-sqlite \
		--enable-mio=kqueue \
		--enable-debug \
		--enable-developer \
		--with-sasl=cyrus \
		--with-extra-include-path=$(OBJROOT)/$(LIBIDN_INCLUDE_DIR):$(SASL_INCLUDE_DIR):$(SQLITE_INCLUDE_DIR):$(OBJROOT)/$(ODAUTH_INCLUDE_DIR) \
		--with-extra-library-path=$(OBJROOT)/$(LIBIDN_LIB_DIR):$(SQLITE_LIB_DIR):$(OBJROOT)/$(ODAUTH_LIB_DIR) \
                CFLAGS="$(CFLAGS) -D HAVE_MEMMOVE -arch $$i" \
                LIBS="-lresolv -framework Security -framework DirectoryService -L$(OBJROOT)/$(ODAUTH_LIB_DIR) -lxmppodauth -framework OpenDirectory -F/System/Library/PrivateFrameworks -framework CoreFoundation -framework CoreSymbolication -framework PasswordServer -framework SystemConfiguration"

# JABBERD2_EXEC_FILES_TO_LIPO  List of all thin binaries that need to be lipo'd 
#                         into universal binaries for the jabberd2 component.
JABBERD2_EXEC_FILES_TO_LIPO	= c2s resolver router s2s sm
# JABBERD2_LIB_FILES_TO_LIPO  List of all thin jabberd library files to lipo into universal.  This list depends on how jabberd2 is configured.
#   Jabberd accesses the lib files via symlinks; we just ditto the symlinks from one of the thin build dirs.
JABBERD2_LIB_FILES_TO_LIPO = \
authreg_sqlite.so \
mod_active.0.0.0.so \
mod_amp.0.0.0.so \
mod_announce.0.0.0.so \
mod_deliver.0.0.0.so \
mod_disco-publish.0.0.0.so \
mod_disco.0.0.0.so \
mod_echo.0.0.0.so \
mod_help.0.0.0.so \
mod_iq-last.0.0.0.so \
mod_iq-ping.0.0.0.so \
mod_iq-private.0.0.0.so \
mod_iq-time.0.0.0.so \
mod_iq-vcard.0.0.0.so \
mod_iq-version.0.0.0.so \
mod_offline.0.0.0.so \
mod_presence.0.0.0.so \
mod_privacy.0.0.0.so \
mod_roster-publish.0.0.0.so \
mod_roster.0.0.0.so \
mod_session.0.0.0.so \
mod_status.0.0.0.so \
mod_template-roster.0.0.0.so \
mod_vacation.0.0.0.so \
mod_validate.0.0.0.so \
storage_sqlite.so

# JABBERD2_FILES_TO_ARCHIVE  All files archived by the jabberd2/cleanobj target.
#                            WARNING: any files introduced into the jabberd2
#                            source folders must be added here too to avoid
#                            losing changes which are not committed to CVS.
JABBERD2_FILES_TO_ARCHIVE	= \
jabberd2/acinclude.m4 \
jabberd2/aclocal.m4 \
jabberd2/AUTHORS \
jabberd2/c2s/authreg.c \
jabberd2/c2s/bind.c \
jabberd2/c2s/c2s.c \
jabberd2/c2s/c2s.h \
jabberd2/c2s/main.c \
jabberd2/c2s/Makefile.am \
jabberd2/c2s/Makefile.in \
jabberd2/c2s/sm.c \
jabberd2/ChangeLog \
jabberd2/compile \
jabberd2/config.guess \
jabberd2/config.h.in \
jabberd2/config.rpath \
jabberd2/config.sub \
jabberd2/configure \
jabberd2/configure.ac \
jabberd2/COPYING \
jabberd2/depcomp \
jabberd2/Doxyfile.in \
jabberd2/etc/c2s.xml.dist.in \
jabberd2/etc/jabberd.cfg.dist.in \
jabberd2/etc/Makefile.am \
jabberd2/etc/Makefile.in \
jabberd2/etc/resolver.xml.dist.in \
jabberd2/etc/router-filter.xml.dist.in \
jabberd2/etc/router-users.xml.dist.in \
jabberd2/etc/router.xml.dist.in \
jabberd2/etc/s2s.xml.dist.in \
jabberd2/etc/sm.xml.dist.in \
jabberd2/etc/templates \
jabberd2/etc/templates/Makefile.am \
jabberd2/etc/templates/Makefile.in \
jabberd2/etc/templates/roster.xml.dist.in \
jabberd2/INSTALL \
jabberd2/install-sh \
jabberd2/ltmain.sh \
jabberd2/Makefile.am \
jabberd2/Makefile.in \
jabberd2/man/c2s.8.in \
jabberd2/man/jabberd.8.in \
jabberd2/man/Makefile.am \
jabberd2/man/Makefile.in \
jabberd2/man/resolver.8.in \
jabberd2/man/router.8.in \
jabberd2/man/s2s.8.in \
jabberd2/man/sm.8.in \
jabberd2/mio/Makefile.am \
jabberd2/mio/Makefile.in \
jabberd2/mio/mio.c \
jabberd2/mio/mio.h \
jabberd2/mio/mio_epoll.c \
jabberd2/mio/mio_epoll.h \
jabberd2/mio/mio_impl.h \
jabberd2/mio/mio_poll.c \
jabberd2/mio/mio_poll.h \
jabberd2/mio/mio_select.c \
jabberd2/mio/mio_select.h \
jabberd2/mio/mio_kqueue.c \
jabberd2/mio/mio_kqueue.h \
jabberd2/missing \
jabberd2/NEWS \
jabberd2/PROTOCOL \
jabberd2/README \
jabberd2/README.win32 \
jabberd2/resolver/dns.c \
jabberd2/resolver/dns.h \
jabberd2/resolver/Makefile.am \
jabberd2/resolver/Makefile.in \
jabberd2/resolver/resolver.c \
jabberd2/resolver/resolver.h \
jabberd2/resolver/TODO \
jabberd2/router/aci.c \
jabberd2/router/filter.c \
jabberd2/router/main.c \
jabberd2/router/Makefile.am \
jabberd2/router/Makefile.in \
jabberd2/router/router.c \
jabberd2/router/router.h \
jabberd2/router/user.c \
jabberd2/s2s/db.c \
jabberd2/s2s/in.c \
jabberd2/s2s/main.c \
jabberd2/s2s/Makefile.am \
jabberd2/s2s/Makefile.in \
jabberd2/s2s/out.c \
jabberd2/s2s/router.c \
jabberd2/s2s/s2s.h \
jabberd2/s2s/util.c \
jabberd2/sm/aci.c \
jabberd2/sm/dispatch.c \
jabberd2/sm/feature.c \
jabberd2/sm/main.c \
jabberd2/sm/Makefile.am \
jabberd2/sm/Makefile.in \
jabberd2/sm/mm.c \
jabberd2/sm/mod_active.c \
jabberd2/sm/mod_amp.c \
jabberd2/sm/mod_announce.c \
jabberd2/sm/mod_deliver.c \
jabberd2/sm/mod_disco.c \
jabberd2/sm/mod_disco_publish.c \
jabberd2/sm/mod_echo.c \
jabberd2/sm/mod_help.c \
jabberd2/sm/mod_iq_last.c \
jabberd2/sm/mod_iq_ping.c \
jabberd2/sm/mod_iq_private.c \
jabberd2/sm/mod_iq_time.c \
jabberd2/sm/mod_iq_vcard.c \
jabberd2/sm/mod_iq_version.c \
jabberd2/sm/mod_offline.c \
jabberd2/sm/mod_presence.c \
jabberd2/sm/mod_privacy.c \
jabberd2/sm/mod_roster.c \
jabberd2/sm/mod_roster_publish.c \
jabberd2/sm/mod_session.c \
jabberd2/sm/mod_status.c \
jabberd2/sm/mod_template_roster.c \
jabberd2/sm/mod_vacation.c \
jabberd2/sm/mod_validate.c \
jabberd2/sm/object.c \
jabberd2/sm/pkt.c \
jabberd2/sm/pres.c \
jabberd2/sm/sess.c \
jabberd2/sm/sm.c \
jabberd2/sm/sm.h \
jabberd2/sm/storage.c \
jabberd2/sm/user.c \
jabberd2/storage/authreg_anon.c \
jabberd2/storage/authreg_db.c \
jabberd2/storage/authreg_ldap.c \
jabberd2/storage/authreg_ldapfull.c \
jabberd2/storage/authreg_mysql.c \
jabberd2/storage/authreg_oracle.c \
jabberd2/storage/authreg_pam.c \
jabberd2/storage/authreg_pgsql.c \
jabberd2/storage/authreg_pipe.c \
jabberd2/storage/authreg_sqlite.c \
jabberd2/storage/Makefile.am \
jabberd2/storage/Makefile.in \
jabberd2/storage/storage_db.c \
jabberd2/storage/storage_fs.c \
jabberd2/storage/storage_ldapvcard.c \
jabberd2/storage/storage_mysql.c \
jabberd2/storage/storage_oracle.c \
jabberd2/storage/storage_pgsql.c \
jabberd2/storage/storage_sqlite.c \
jabberd2/subst/dirent.c \
jabberd2/subst/dirent.h \
jabberd2/subst/getopt.c \
jabberd2/subst/getopt.h \
jabberd2/subst/gettimeofday.c \
jabberd2/subst/inet_aton.c \
jabberd2/subst/inet_ntop.c \
jabberd2/subst/inet_pton.c \
jabberd2/subst/ip6_misc.h \
jabberd2/subst/Makefile.am \
jabberd2/subst/Makefile.in \
jabberd2/subst/snprintf.c \
jabberd2/subst/strndup.c \
jabberd2/subst/subst.h \
jabberd2/subst/syslog.c \
jabberd2/subst/syslog.h \
jabberd2/subst/timegm.c \
jabberd2/sx/ack.c \
jabberd2/sx/callback.c \
jabberd2/sx/chain.c \
jabberd2/sx/client.c \
jabberd2/sx/compress.c \
jabberd2/sx/env.c \
jabberd2/sx/error.c \
jabberd2/sx/io.c \
jabberd2/sx/Makefile.am \
jabberd2/sx/Makefile.in \
jabberd2/sx/plugins.h \
jabberd2/sx/sasl.h \
jabberd2/sx/sasl_cyrus.c \
jabberd2/sx/sasl_gsasl.c \
jabberd2/sx/sasl_scod.c \
jabberd2/sx/scod \
jabberd2/sx/scod/Makefile.am \
jabberd2/sx/scod/Makefile.in \
jabberd2/sx/scod/mech_anonymous.c \
jabberd2/sx/scod/mech_digest_md5.c \
jabberd2/sx/scod/mech_plain.c \
jabberd2/sx/scod/scod.c \
jabberd2/sx/scod/scod.h \
jabberd2/sx/server.c \
jabberd2/sx/ssl.c \
jabberd2/sx/sx.c \
jabberd2/sx/sx.h \
jabberd2/TODO \
jabberd2/tools/db-jd14-2-jd2.sql \
jabberd2/tools/db-setup.mysql \
jabberd2/tools/db-setup.oracle \
jabberd2/tools/db-setup.pgsql \
jabberd2/tools/db-setup.sqlite \
jabberd2/tools/db-update.mysql \
jabberd2/tools/jabberd.in \
jabberd2/tools/jabberd.rc \
jabberd2/tools/Makefile.am \
jabberd2/tools/Makefile.in \
jabberd2/tools/migrate.pl \
jabberd2/tools/pipe-auth.pl \
jabberd2/UPGRADE \
jabberd2/util/access.c \
jabberd2/util/base64.c \
jabberd2/util/config.c \
jabberd2/util/datetime.c \
jabberd2/util/hex.c \
jabberd2/util/inaddr.c \
jabberd2/util/inaddr.h \
jabberd2/util/jid.c \
jabberd2/util/jid.h \
jabberd2/util/jqueue.c \
jabberd2/util/jsignal.c \
jabberd2/util/log.c \
jabberd2/util/Makefile.am \
jabberd2/util/Makefile.in \
jabberd2/util/md5.c \
jabberd2/util/md5.h \
jabberd2/util/nad.c \
jabberd2/util/nad.h \
jabberd2/util/pool.c \
jabberd2/util/pool.h \
jabberd2/util/rate.c \
jabberd2/util/serial.c \
jabberd2/util/sha1.c \
jabberd2/util/sha1.h \
jabberd2/util/stanza.c \
jabberd2/util/str.c \
jabberd2/util/uri.h \
jabberd2/util/util.h \
jabberd2/util/util_compat.h \
jabberd2/util/xdata.c \
jabberd2/util/xdata.h \
jabberd2/util/xhash.c \
jabberd2/util/xhash.h

# jabberd2 build rules
#
#	jabberd2/extract_and_patch		: Expands the jabberd2 source tarball and applies Apple (pre-configure) patches
#   jabberd2/config.status  		: runs the configure script for the jabberd2 sources
#	jabberd2/post-configure_patch	: Applies Apple post-configure patches to the jabberd2 source
#   jabberd2/jabberd2          		: Patches and configures the jabberd2 source to prepare for makeinstall
#   jabberd2/makeinstall    		: creates installed file and directoried in an intermediate directory
#   jabberd2/build         		 	: wrapper rule for jabberd2 and makeinstall
#

$(JABBERD2_NAME)/extract_and_patch:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: EXTRACT AND PATCH; SRCROOT=$(SRCROOT)"
	@echo "#"
	for i in $(JABBERD2_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...extracting; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...extracting - SRCROOT=$(SRCROOT)"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...extracting - creating $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i"; \
		$(SILENT) $(MKDIR) -p -m 777 $(OBJROOT)/$(JABBERD2_SRC_DIR); \
		$(SILENT) $(SRCROOT)/$(JABBERD_PATCH_TOOL) -a -f $(SRCROOT)/$(JABBERD_DIST_TAR) -p $(SRCROOT)/$(PATCH_DIR_PRECONF)/$(JABBERD2_NAME) -n $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i -t $(OBJROOT)/$(JABBERD2_BUILD_DIR); \
	done

$(JABBERD2_NAME)/config.status:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: CONFIGURING; SRCROOT=$(SRCROOT)"
	@echo "#"
	for i in $(JABBERD2_ARCHS); do \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...configuring; arch=$$i"; \
		$(SILENT) $(ECHO) "#"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...configuring - SRCROOT=$(SRCROOT)"; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...configuring - creating $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i; $(RM) -rf ac-stdint.h; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...configuring - creating final sources; arch=$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i; \
		$(SILENT) $(CP) $(SRCROOT)/config_cache/jabberd2/$$i/config.cache $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i/config.cache; \
		./configure --prefix=$(BUILD_DIR) --build=$(BUILD_ARCH)-apple-darwin --host=$$i-apple-darwin --config-cache $(JABBERD2_CONFIG_OPTS); \
	done

$(JABBERD2_NAME)/post-configure_patch:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: POST-CONFIGURE PATCHING; SRCROOT=$(SRCROOT)"
	@echo "#"
	for i in $(JABBERD2_ARCHS); do \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...configuring - patching $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i/Makefile; arch=$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i; $(CP) Makefile Makefile.bak; $(PATCH) -F3 -u Makefile $(SRCROOT)/$(PATCH_DIR_POSTCONF)/$(JABBERD2_NAME)/Makefile.patch; \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...configuring - patching $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i/config.h; arch=$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i; $(CP) config.h config.h.bak; $(PATCH) -u config.h $(SRCROOT)/$(PATCH_DIR_POSTCONF)/$(JABBERD2_NAME)/config_h.patch; \
	done

jabberd2/jabberd2: $(JABBERD2_NAME)/extract_and_patch $(JABBERD2_NAME)/config.status $(JABBERD2_NAME)/post-configure_patch
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: BUILDING; SRCROOT=$(SRCROOT)"
	@echo "#"
	for i in $(JABBERD2_ARCHS); do \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...building; arch=$$i; src=$(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i"; \
		$(SILENT) $(CD) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i; \
		make; \
	done

jabberd2/makeinstall:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: INSTALLING; DESTDIR=$(OBJROOT)/$(JABBERD2_BUILD_DIR)"
	@echo "#"
	for i in $(JABBERD2_ARCHS); do \
		$(SILENT) $(ECHO) "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...installing; arch=$$i"; \
		$(SILENT) $(MKDIR) -p -m 777 $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$$i; \
		$(SILENT) $(CD) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$$i; make install DESTDIR=$(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$$i; \
	done
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...installing - creating universal binaries"
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)
	$(SILENT) $(MKDIRS) $(SYMROOT)/$(USRBIN_DIR)
	for i in $(JABBERD2_EXEC_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(JABBERD2_ARCHS), -arch $(arch) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(arch)/$(USRBIN_DIR)/$$i )  \
			-output $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
		$(SILENT) $(CP) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)/$$i $(SYMROOT)/$(USRBIN_DIR)/; \
		$(SILENT) $(STRIP) -S $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)/$$i; \
	done
	$(SILENT) $(INSTALL) -m 755 -o root -g wheel $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(firstword $(JABBERD2_ARCHS))/$(USRBIN_DIR)/jabberd $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRBIN_DIR)
	$(SILENT) $(MKDIRS) $(SYMROOT)/$(JABBER_VAR_DIR)/modules/jabberd2
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2
# Copy symlinks for jabberd2 modules
	$(SILENT) $(DITTO) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(firstword $(JABBERD2_ARCHS))/$(MODULES_DIR) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2
# .la files shouldn't be necessary for dynamic shared objects
	$(SILENT) $(RM) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2/*.la
#  This is not working, but it would be nice to make the list of shared libs dynamic based on what jabberd2 builds.
#	JABBERD2_LIB_FILES_TO_LIPO = $(shell $(FIND) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(firstword $(JABBERD2_ARCHS))/$(MODULES_DIR) -name "*.so" -type f|awk -F "/" '{print $NF}')
	for i in $(JABBERD2_LIB_FILES_TO_LIPO); do \
		$(SILENT) $(RM) -rf $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2/$$i; \
		$(SILENT) $(LIPO) -create \
			$(foreach arch, $(JABBERD2_ARCHS), -arch $(arch) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(arch)/$(MODULES_DIR)/$$i ) \
			-output $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2/$$i; \
		$(SILENT) $(CP) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2/$$i $(SYMROOT)/$(JABBER_VAR_DIR)/modules/jabberd2/; \
		$(SILENT) $(STRIP) -S $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2/$$i > /dev/null 2>&1; \
		$(SILENT) $(LIPO) -info $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2/$$i; \
	done
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...installing version and license info"
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/jabberd2.plist $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/jabberd2.txt $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/mu-conference.plist $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/mu-conference.txt $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/glib.plist $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/glib.txt $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/proxy65.plist $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/proxy65.txt $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/libidn.plist $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/libidn.txt $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/gettext.plist $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceVersions
	$(SILENT) $(INSTALL) -m 444 -o root -g wheel $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/gettext.txt $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(USRLOCAL_DIR)/OpenSourceLicenses
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: ...installing - copying man pages for executables"
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(MAN_DIR)
	$(SILENT) $(DITTO) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(firstword $(JABBERD2_ARCHS))/$(MAN_DIR) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(MAN_DIR)

jabberd2/build: jabberd2/jabberd2 jabberd2/makeinstall

# jabberd2/clean rules
#   jabberd2/clean     : erase all except pre-defined jabberd2 sources (DEFAULT)
#   jabberd2/cleanobj  : standard make clean to erase just the object files
#   jabberd2/clean-all : wipe the jabberd2 directory for later restore from archive

jabberd2/clean:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: cleaning OBJECTS"
	@echo "#"
	$(SILENT) $(RM) -rf $(OBJROOT)/$(JABBERD2_SRC_DIR)

jabberd2/cleanobj:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: cleaning SOURCES"
	@echo "#"
	$(SILENT) $(TAR) -czf $(JABBERD2_SAVE).tgz $(JABBERD2_FILES_TO_ARCHIVE)
	$(SILENT) -$(RM) -rf $(JABBERD2_VERSION) $(JABBERD2_NAME) $(OBJROOT)/$(JABBERD2_SRC_DIR)
	$(SILENT) $(TAR) -xzf $(JABBERD2_SAVE).tgz

jabberd2/clean-all:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [jabberd2]: cleaning ALL"
	@echo "#"
	$(SILENT) $(RM) -rf $(JABBERD2_NAME) $(OBJROOT)/$(JABBERD2_SRC_DIR)

#-------------------------------
# TOP-LEVEL MAKE RULES
#-------------------------------
#

BACKUPRESTORE_SRC_DIR=backup_restore
MIGRATION_SRC_DIR=migration

# FILES_TO_INSTALL  Used by the installsrc target.
#                   WARNING! Make sure to update this will ALL project sources 
#                   (files AND folders), or the B&I build may fail!!!

FILES_TO_INSTALL		=  \
Makefile $(TOOLS_DIR) $(OPENSOURCE_PKG_DIR)\
apple_patch cfg-apple config_cache \
$(AUTOBUDDY_SRC_DIR) $(BACKUPRESTORE_SRC_DIR) $(ODAUTH_SRC_DIR) \
$(MIGRATION_SRC_DIR) \
$(JABBERD2_NAME)

#.PHONY: all build configure install untar clean cleanobj clean-all installhdrs installsrc \
#	install/intro_banner install/jabber_usr_dir install/autobuddy \
#	install/mu-conference install/runtime_scripts install/man_pages \
#	install/custom_configs install/sbsbackup install/jabber_var_dirs \
#	install/file_proxy install/migration install/copy_dstroot
.PHONY: all build configure install untar clean cleanobj clean-all installhdrs installsrc \
	install/intro_banner install/jabber_usr_dir \
	install/mu-conference install/runtime_scripts install/man_pages \
	install/custom_configs install/sbsbackup install/jabber_var_dirs \
	install/file_proxy install/migration install/copy_dstroot

all: build

build: od_auth/build gettext/build glib/build libidn/build muc/build jabberd2/build

configure: $(LIBIDN_NAME)/config.status libidn/build $(JABBERD2_NAME)/config.status

#
# Create the final install image for DSTROOT
#
# The install target takes all the intermediate build products from jabberd2 and the other 
# components and creates STAGING_DIR, which is used to intall all the build products into
# their final directories and perform any final patches.  Once STAGING_DIR is fully
# processed, it is then copied to DSTROOT as the final set of files to be installed in the OS.
#
# - Executables are lipo'd from each installed architecture and combined into a single universal 
#   binary in the common staging directory.
# - Non-executables generated by the configure script are installed from the ppc build into the 
#   common staging directory.
# - Other files are copied from the common source directory into the common staging directory.
# - Miscellaneous patch are applied here before final installation in DSTROOT.
#

JABBER_VAR_DIR=$(VAR_DIR)/jabberd

#
# Install sub-targets
#

install/intro_banner:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: COPYING; STAGING_DIR=$(OBJROOT)/$(STAGING_DIR)"
	@echo "#"
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(STAGING_DIR)/$(USRBIN_DIR)

install/jabber_usr_dir:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying jabber binaries"
	$(SILENT) $(DITTO) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/usr $(OBJROOT)/$(STAGING_DIR)/usr

install/mu-conference:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying mu-conference binary"
	$(SILENT) $(MKDIRS) $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)
	$(SILENT) $(CP) $(OBJROOT)/$(MUC_INSTALL_DIR)/$(LIBEXEC_DIR)/mu-conference $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/

install/runtime_scripts:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying runtime scripts"
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)
	$(SILENT) $(CP) $(SRCROOT)/tools/ichatserver_init_tool $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/server_backup
	$(SILENT) $(CP) $(SRCROOT)/$(BACKUPRESTORE_SRC_DIR)/iChatServer_* $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/server_backup/
	$(SILENT) $(MKDIR) -p -m 700 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/tmp
	
#install/man_pages:
#	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying additional man pages"
#	$(SILENT) $(MKDIR) -p -m 755  $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8
#	$(SILENT) $(CP) $(SRCROOT)/tools/ichatserver_init_tool.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
#	$(SILENT) $(CP) $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/mu-conference.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
#	$(SILENT) $(CP) $(SRCROOT)/$(AUTOBUDDY_SRC_DIR)/jabber_autobuddy.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/

install/man_pages:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying additional man pages"
	$(SILENT) $(MKDIR) -p -m 755  $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8
	$(SILENT) $(CP) $(SRCROOT)/tools/ichatserver_init_tool.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/ichatserver_init_tool.8
	$(SILENT) $(CP) $(SRCROOT)/$(OPENSOURCE_PKG_DIR)/mu-conference.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/mu-conference.8
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/jabber_config_migrator.pl.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/jabber_config_migrator.pl.8
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/jabber_data_migrate_1.4-2.x.rb.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/jabber_data_migrate_1.4-2.x.rb.8
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/jabber_data_migrate_2.0-2.1.pl.8 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(MAN_DIR)/man8/jabber_data_migrate_2.0-2.1.pl.8

install/custom_configs:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying Apple configuration files"
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)
	$(SILENT) $(CP) -r $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(firstword $(JABBERD2_ARCHS))/$(SYSCONFIG_DIR)/jabberd $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/
	$(SILENT) $(RM) -rf $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(firstword $(JABBERD2_ARCHS))/$(SYSCONFIG_DIR)/jabberd
	$(SILENT) $(RM) -rf $(OBJROOT)/$(STAGING_DIR)/$(SYSCONFIG_DIR)
	$(SILENT) $(CP) $(SRCROOT)/cfg-apple/*.xml $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/
	$(SILENT) $(CP) $(SRCROOT)/cfg-apple/*.cfg $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/
	$(SILENT) $(CP) $(SRCROOT)/cfg-apple/muc-jcr.xml $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/
	$(SILENT) $(CHOWN) jabber:wheel $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/*.xml
	$(SILENT) $(CHOWN) jabber:wheel $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/jabberd.cfg
	$(SILENT) $(CHMOD) 600 $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/*.xml
	$(SILENT) $(CHMOD) 600 $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/jabberd/jabberd.cfg

install/sbsbackup:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying SBS Backup files"
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/server_backup
	$(SILENT) $(CP) $(SRCROOT)/$(BACKUPRESTORE_SRC_DIR)/75-iChatServer.plist $(OBJROOT)/$(STAGING_DIR)/$(ETC_DIR)/server_backup/

install/migration:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying migration tools"
	$(SILENT) $(MKDIR) -p -m 700 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/tmp
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(MIGRATION_EXTRAS_DIR)
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/58_jabbermigrator.pl $(OBJROOT)/$(STAGING_DIR)/$(MIGRATION_EXTRAS_DIR)/
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/jabber_config_migrator.pl $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/jabber_data_migrate_1.4-2.x.rb $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/
	$(SILENT) $(CP) $(SRCROOT)/$(MIGRATION_SRC_DIR)/jabber_data_migrate_2.0-2.1.pl $(OBJROOT)/$(STAGING_DIR)/$(LIBEXEC_DIR)/

install/jabber_var_dirs:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying - creating Jabberd /var directories"
	$(SILENT) $(MKDIR) -p -m 750 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)
	$(SILENT) $(CP) $(OBJROOT)/$(JABBERD2_SRC_DIR)/$(firstword $(JABBERD2_ARCHS))/tools/db-setup.sqlite $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/
	$(SILENT) $(MKDIR) -p -m 750 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/modules
	$(SILENT) $(DITTO) $(OBJROOT)/$(JABBERD2_INSTALL_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2
	$(SILENT) $(CHOWN) -R jabber:jabber $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/modules/jabberd2
	$(SILENT) $(MKDIR) -p -m 750 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/message_archives
	$(SILENT) $(CHOWN) jabber:admin $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/message_archives
	$(SILENT) $(MKDIR) -p -m 750 $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/muc_room_logs
	$(SILENT) $(CHOWN) jabber:jabber $(OBJROOT)/$(STAGING_DIR)/$(JABBER_VAR_DIR)/muc_room_logs

install/file_proxy:
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying File Proxy files"
	$(SILENT) $(MKDIR) -p -m 750 $(OBJROOT)/$(STAGING_DIR)/private/var/jabberd/log
	$(SILENT) $(MKDIR) -p -m 755 $(OBJROOT)/$(STAGING_DIR)/$(USRSHARE_DIR)/proxy65
	$(SILENT) $(CP) $(SRCROOT)/modules/filetransfer/proxy65.py $(OBJROOT)/$(STAGING_DIR)/$(USRSHARE_DIR)/proxy65
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(USRSHARE_DIR)/proxy65/proxy65.py
	$(SILENT) $(CP) $(SRCROOT)/modules/filetransfer/socks5.py $(OBJROOT)/$(STAGING_DIR)/$(USRSHARE_DIR)/proxy65
	$(SILENT) $(CHMOD) 644 $(OBJROOT)/$(STAGING_DIR)/$(USRSHARE_DIR)/proxy65/socks5.py
	$(SILENT) $(CHOWN) -R root:wheel $(OBJROOT)/$(STAGING_DIR)/$(USRSHARE_DIR)/proxy65

install/copy_dstroot:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...copying staged content to DSTROOT"
	@echo "#"
	$(SILENT) $(DITTO) $(OBJROOT)/$(STAGING_DIR)/private $(DSTROOT)/private
	$(SILENT) $(DITTO) $(OBJROOT)/$(STAGING_DIR)/usr $(DSTROOT)/usr
	$(SILENT) $(DITTO) $(OBJROOT)/$(STAGING_DIR)/System $(DSTROOT)/System
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: [staging]: ...fixing DESTROOT ownership & permissions"
	$(SILENT) $(CHOWN) jabber:jabber $(DSTROOT)/private/var/jabberd
	$(SILENT) $(CHOWN) jabber:jabber $(DSTROOT)/private/var/jabberd/db-setup.sqlite
	$(SILENT) $(CHOWN) -R jabber:jabber $(DSTROOT)/private/var/jabberd/log
	$(SILENT) $(CHOWN) -R jabber:admin $(DSTROOT)/private/var/jabberd/message_archives
	$(SILENT) $(CHOWN) -R jabber:jabber $(DSTROOT)/private/var/jabberd/modules
	$(SILENT) $(CHOWN) -R jabber:jabber $(DSTROOT)/private/var/jabberd/tmp
	$(SILENT) $(CHOWN) root:wheel $(DSTROOT)/$(MAN_DIR)/man8/*

install/end_banner:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: BUILD COMPLETE."
	@echo "#"
	@echo "### The latest information about Jabber 2.0 is available on the web"
	@echo "### at http://jabberd.jabberstudio.org/2/.  Use Server Preferences"
	@echo "### or Server Admin app to set up and start iChat Server."

#
# MAIN INSTALL TARGET
#
# Executes all sub-targets and displays the completion banner
#
#install: build \
#		install/intro_banner install/jabber_usr_dir install/autobuddy \
#		install/mu-conference install/runtime_scripts install/man_pages \
#		install/custom_configs install/sbsbackup install/jabber_var_dirs \
#		install/file_proxy install/migration \
#		install/copy_dstroot install/end_banner
install: build \
		install/intro_banner install/jabber_usr_dir \
		install/mu-conference install/runtime_scripts install/man_pages \
		install/custom_configs install/sbsbackup install/jabber_var_dirs \
		install/file_proxy install/migration \
		install/copy_dstroot install/end_banner

untar: libidn/untar jabberd2/untar

clean: libidn/clean jabberd2/clean

cleanobj: libidn/cleanobj jabberd2/cleanobj

clean-all: libidn/clean-all jabberd2/clean-all

installhdrs:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: No headers to install in $(SRCROOT)"
	@echo "#"

# installsrc target -- make sure that all source files to be installed 
#                      are included in the FILES_TO_INSTALL list
installsrc:
	@echo "#"
	@echo "# `date +%Y/%m/%d\ %H:%M:%S` ChatServer: Installing sources into $(SRCROOT)"
	@echo "#"
	$(SILENT) -$(RM) -rf $(SRCROOT)
	$(SILENT) $(MKDIRS) $(SRCROOT)
	$(SILENT) $(CP) -r $(FILES_TO_INSTALL) $(SRCROOT)
#	$(SILENT) install-src-run=1

#
# Rules for special build directories
#
#
$(BUILD_DIR):
	$(SILENT) $(MKDIRS) $@

$(DSTROOT):
	$(SILENT) $(MKDIRS) $@

$(OBJROOT):
	$(SILENT) $(MKDIRS) $@