si002.tcl   [plain text]

# See the file LICENSE for redistribution information.
#
# Copyright (c) 2001-2003
#	Sleepycat Software.  All rights reserved.
#
# $Id: si002.tcl,v 1.2 2004/03/30 01:24:08 jtownsen Exp $
#
# TEST	si002
# TEST	Basic cursor-based secondary index put/delete test
# TEST
# TEST  Cursor put data in primary db and check that pget
# TEST  on secondary index finds the right entries.
# TEST  Overwrite while walking primary, check pget again.
# TEST      Overwrite while walking secondary (use c_pget), check
# TEST  pget again.
# TEST  Cursor delete half of entries through primary, check.
# TEST  Cursor delete half of remainder through secondary, check.
proc si002 { methods {nentries 200} {tnum "002"} args } {
	source ./include.tcl
	global dict nsecondaries

	# Primary method/args.
	set pmethod [lindex $methods 0]
	set pargs [convert_args $pmethod $args]
	set pomethod [convert_method $pmethod]

	# Method/args for all the secondaries.  If only one method
	# was specified, assume the same method and a standard N
	# secondaries.
	set methods [lrange $methods 1 end]
	if { [llength $methods] == 0 } {
		for { set i 0 } { $i < $nsecondaries } { incr i } {
			lappend methods $pmethod
		}
	}

	set argses [convert_argses $methods $args]
	set omethods [convert_methods $methods]

	puts "Si$tnum ($pmethod/$methods) $nentries equal key/data pairs"
	env_cleanup $testdir

	set pname "primary$tnum.db"
	set snamebase "secondary$tnum"

	# Open an environment
	# XXX if one is not supplied!
	set env [berkdb_env -create -home $testdir]
	error_check_good env_open [is_valid_env $env] TRUE

	# Open the primary.
	set pdb [eval {berkdb_open -create -env} $env $pomethod $pargs $pname]
	error_check_good primary_open [is_valid_db $pdb] TRUE

	# Open and associate the secondaries
	set sdbs {}
	for { set i 0 } { $i < [llength $omethods] } { incr i } {
		set sdb [eval {berkdb_open -create -env} $env \
		    [lindex $omethods $i] [lindex $argses $i] $snamebase.$i.db]
		error_check_good second_open($i) [is_valid_db $sdb] TRUE

		error_check_good db_associate($i) \
		    [$pdb associate [callback_n $i] $sdb] 0
		lappend sdbs $sdb
	}

	puts "\tSi$tnum.a: Cursor put (-keyfirst/-keylast) loop"
	set did [open $dict]
	set pdbc [$pdb cursor]
	error_check_good pdb_cursor [is_valid_cursor $pdbc $pdb] TRUE
	for { set n 0 } { [gets $did str] != -1 && $n < $nentries } { incr n } {
		if { [is_record_based $pmethod] == 1 } {
			set key [expr $n + 1]
			set datum $str
		} else {
			set key $str
			gets $did datum
		}
		set ns($key) $n
		set keys($n) $key
		set data($n) [pad_data $pmethod $datum]

		if { $n % 2 == 0 } {
			set pflag " -keyfirst "
		} else {
			set pflag " -keylast "
		}

		set ret [eval {$pdbc put} $pflag \
		    {$key [chop_data $pmethod $datum]}]
		error_check_good put($n) $ret 0
	}
	close $did
	error_check_good pdbc_close [$pdbc close] 0
	check_secondaries $pdb $sdbs $nentries keys data "Si$tnum.a"

	puts "\tSi$tnum.b: Cursor put overwrite (-current) loop"
	set pdbc [$pdb cursor]
	error_check_good pdb_cursor [is_valid_cursor $pdbc $pdb] TRUE
	for { set dbt [$pdbc get -first] } { [llength $dbt] > 0 } \
	    { set dbt [$pdbc get -next] } {
		set key [lindex [lindex $dbt 0] 0]
		set datum [lindex [lindex $dbt 0] 1]
		set newd $datum.$key
		set ret [eval {$pdbc put -current} [chop_data $pmethod $newd]]
		error_check_good put_overwrite($key) $ret 0
		set data($ns($key)) [pad_data $pmethod $newd]
	}
	error_check_good pdbc_close [$pdbc close] 0
	check_secondaries $pdb $sdbs $nentries keys data "Si$tnum.b"

	puts "\tSi$tnum.c: Secondary c_pget/primary put overwrite loop"
	# We walk the first secondary, then put-overwrite each primary key/data
	# pair we find.  This doubles as a DBC->c_pget test.
	set sdb [lindex $sdbs 0]
	set sdbc [$sdb cursor]
	error_check_good sdb_cursor [is_valid_cursor $sdbc $sdb] TRUE
	for { set dbt [$sdbc pget -first] } { [llength $dbt] > 0 } \
	    { set dbt [$sdbc pget -next] } {
		set pkey [lindex [lindex $dbt 0] 1]
		set pdatum [lindex [lindex $dbt 0] 2]

		# Extended entries will be showing up underneath us, in
		# unpredictable places.  Keep track of which pkeys
		# we've extended, and don't extend them repeatedly.
		if { [info exists pkeys_done($pkey)] == 1 } {
			continue
		} else {
			set pkeys_done($pkey) 1
		}

		set newd $pdatum.[string range $pdatum 0 2]
		set ret [eval {$pdb put} $pkey [chop_data $pmethod $newd]]
		error_check_good pdb_put($pkey) $ret 0
		set data($ns($pkey)) [pad_data $pmethod $newd]
	}
	error_check_good sdbc_close [$sdbc close] 0
	check_secondaries $pdb $sdbs $nentries keys data "Si$tnum.c"

	# Delete the second half of the entries through the primary.
	# We do the second half so we can just pass keys(0 ... n/2)
	# to check_secondaries.
	set half [expr $nentries / 2]
	puts "\tSi$tnum.d:\
	    Primary cursor delete loop: deleting $half entries"
	set pdbc [$pdb cursor]
	error_check_good pdb_cursor [is_valid_cursor $pdbc $pdb] TRUE
	set dbt [$pdbc get -first]
	for { set i 0 } { [llength $dbt] > 0 && $i < $half } { incr i } {
		error_check_good pdbc_del [$pdbc del] 0
		set dbt [$pdbc get -next]
	}
	error_check_good pdbc_close [$pdbc close] 0
	cursor_check_secondaries $pdb $sdbs $half "Si$tnum.d"

	# Delete half of what's left, through the first secondary.
	set quar [expr $half / 2]
	puts "\tSi$tnum.e:\
	    Secondary cursor delete loop: deleting $quar entries"
	set sdb [lindex $sdbs 0]
	set sdbc [$sdb cursor]
	set dbt [$sdbc get -first]
	for { set i 0 } { [llength $dbt] > 0 && $i < $quar } { incr i } {
		error_check_good sdbc_del [$sdbc del] 0
		set dbt [$sdbc get -next]
	}
	error_check_good sdbc_close [$sdbc close] 0
	cursor_check_secondaries $pdb $sdbs $quar "Si$tnum.e"

	foreach sdb $sdbs {
		error_check_good secondary_close [$sdb close] 0
	}
	error_check_good primary_close [$pdb close] 0
	error_check_good env_close [$env close] 0
}