2002-08-06 Klee Dienes * breakpoint.c (watchpoint_equal): New function. Like value_equal, but arrays only count as "equal" if they have the same contents. (breakpoint_re_set_one): Remove watchpoints if there is an error in setting them. (config/nm-macosx.h): Rename TARGET_RANGE_PROFITABLE_FOR_HW_WATCHPOINT to TARGET_RANGE_OK_FOR_HW_WATCHPOINT. 2002-04-07 Andrew Cagney I believe Jeff Law denies responsability for this one: * config/pa/hpux11w.mh (MH_CFLAGS): Add -Dvfork=fork. * config/pa/hpux11.mh (MH_CFLAGS): Add -Dvfork=fork. * config/pa/hpux1020.mh (MH_CFLAGS): Add -Dvfork=fork. Work-around for PR gdb/366. 2002-04-07 Elena Zannoni * remote-e7000.c (write_small, e7000_read_inferior_memory, e7000_read_inferior_memory_large, e7000_insert_breakpoint, e7000_remove_breakpoint): Use paddr_nz() to print addresses. 2002-04-07 Elena Zannoni * sh-tdep.c (sh_fp_frame_init_saved_regs, sh_nofp_frame_init_saved_regs): Use alloca() for 'where' information. 2002-04-07 Andrew Cagney * MAINTAINERS (Misc): List Daniel Jacobowitz as the GDBSERVER maintainer. 2002-04-07 Andrew Cagney * README (Reporting Bugs in GDB): Document the bug web page as the prefered way of submitting bugs. Fix PR gdb/402. 2002-04-06 Andrew Cagney * gdbarch.sh (FP_REGNUM, PC_REGNUM, SP_REGNUM): Allow default of -1. Update comment. * gdbarch.h, gdbarch.c: Re-generate. 2002-04-07 Andreas Schwab * m68klinux-nat.c (fill_fpregset): Properly pass address of buffer to regcache_collect. 2002-04-06 Andrew Cagney * gdbarch.sh (PS_REGNUM): Add. Document. Default to -1. * gdbarch.c, gdbarch.h: Re-generate. 2002-04-06 Andrew Cagney * symtab.c (lookup_symtab): Remove ``const'' from ``rp'' declaration. Fix -Werror. 2002-04-05 Daniel Jacobowitz * gdbarch.sh (initialize_non_multiarch): Call init_gdbarch_swap. * gdbarch.c: Regenerate. 2002-04-05 Michael Snyder * cli/cli-dump.c (restore_section_callback): Use paddr_nz. 2002-04-05 H.J. Lu (hjl@gnu.org) * solib-svr4.c (bkpt_names): Add "__start". 2002-04-04 Andrew Cagney * sparc-tdep.c (sparc_push_dummy_frame): Use GDB_TARGET_IS_SPARC64 as test for 64 bit target. 2002-04-05 Andrew Cagney * h8500-tdep.c (h8500_write_fp): Delete function. * dwarf2cfi.c (cfi_write_fp): Document as not used. * mips-tdep.c (mips_gdbarch_init): Do not set write_fp. * ia64-tdep.c (ia64_gdbarch_init): Do not set write_fp. * m68hc11-tdep.c (m68hc11_gdbarch_init): Do not set write_fp. * rs6000-tdep.c (rs6000_gdbarch_init): Do not set write_fp. * s390-tdep.c (s390_gdbarch_init): Do not set write_fp. (s390_write_fp): * sh-tdep.c (sh_gdbarch_init): Do not set write_fp. * x86-64-tdep.c (i386_gdbarch_init): Do not set write_fp. * d10v-tdep.c (d10v_gdbarch_init): Do not set write_fp. (d10v_write_fp): Delete function. * inferior.h (write_fp, generic_target_write_fp): Delete declarations. * regcache.c (generic_target_write_fp): Delete function. (write_fp): Delete function. * gdbarch.sh (TARGET_WRITE_FP): Delete. * gdbarch.h, gdbarch.c: Regenerate. * config/v850/tm-v850.h (TARGET_WRITE_FP): Delete macro. * config/sparc/tm-sp64.h (TARGET_WRITE_FP): Delete macro. (sparc64_write_fp): Delete declaration. * config/h8500/tm-h8500.h (TARGET_WRITE_FP): Delete macro. (h8500_write_fp): Delete declaration. 2002-04-04 Andrew Cagney * sparc-tdep.c (sparc64_write_fp): Delete. (sparc_push_dummy_frame): Replace write_fp call with code to store the FP directly. (sparc_gdbarch_init): Do not initialize write_fp. 2002-04-05 Kevin Buettner * rs6000-tdep.c (skip_prologue): Eliminate unused/unreachable clause. 2002-03-29 Jim Blandy * stack.c (get_selected_block): Add new argument `addr_in_block', used to return the exact code address we used to select the block, not just the block. * blockframe.c (get_frame_block, get_current_block): Same. * frame.h (get_frame_block, get_current_block, get_selected_block): Update declarations. * linespec.c, stack.c, blockframe.c, breakpoint.c, findvar.c, linespec.c, varobj.c, printcmd.c, symtab.c: Callers changed. 2002-04-05 Michael Snyder * breakpoint.c (insert_breakpoints): Change 'hw' to 'hardware in warning message. 2002-04-05 J. Brobecker * utils.c (xfullpath): New function. * defs.h (xfullpath): Add declaration. * source.c (openp): Use xfullpath in place of gdb_realpath to avoid resolving the basename part of filenames when the associated file is a symbolic link. This fixes a potential inconsistency between the filenames known to GDB and the filenames it prints in the annotations. * symtab.c (lookup_symtab): Use the new xfullpath function, in order to be able to match a filename with either the real filename, or the name of any symbolic link to this file. (lookup_partial_symtab): Ditto. 2002-04-04 Michael Snyder * breakpoint.c: Add support for hardware breakpoints in overlays. (overlay_events_enabled): New state variable. (insert_breakpoints): Use overlay_events_enabled to decide whether to attempt to set a breakpoint at the overlay load addr. Handle bp_hardware_breakpoint as well as bp_breakpoint. (remove_breakpoint): Use overlay_events_enabled to decide whether breakpoints need to be removed from overlay load addr. Handle bp_hardware_breakpoint as well as bp_breakpoint. (bpstat_stop_status): Handle bp_hardware_breakpoint in overlays. (create_overlay_event_breakpoint, enable_overlay_breakpoints, disable_overlay_breakpoints): Update overlay_events_enabled. 2002-04-04 Daniel Jacobowitz * dwarf2read.c (struct function_range): New. (cu_first_fn, cu_last_fn, cu_cached_fn): New. (check_cu_functions): New. (read_file_scope): Initialize global function lists. Call dwarf_decode_line after processing children. (read_func_scope): Add to global function list. (dwarf_decode_lines): Call check_cu_functions everywhere record_line is called. Call record_line with a linenumber of 0 to mark sequence ends. 2002-04-04 Michal Ludvig * x86-64-linux-nat.c (child_xfer_memory): x86-64 ptrace() ABI change sync with glibc. 2002-04-03 Jim Blandy * configure.in: Call AC_C_INLINE. * configure: Regenerated. 2002-04-01 Daniel Jacobowitz * rs6000-tdep.c: Change #include of "bfd/libcoff.h" and "bfd/libbfd.h" to "libcoff.h" and "libbfd.h". 2002-03-31 Mark Kettenis * NEWS: Mention gcore support on FreeBSD/i386. * fbsd-proc.c: New file. * config/i386/nm-fbsd.h (CHILD_PID_TO_EXEC_FILE): Define. * config/i386/fbsd.mh (NATDEPFILES): Add gcore.o and fbsd-proc.o. * lin-lwp.c (child_wait): Check SAVE_ERRNO instead of ERRNO in while statement. 2002-03-29 Jim Blandy * cli/cli-dump.c (_initialize_cli_dump): Older GCC's tolerate unescaped newlines in string literals, but newer ones don't. So escape them. 2002-03-26 Michael Snyder Andrew Cagney * cli/cli-dump.c: New file. Dump memory to file, restore file to memory. * cli/cli-dump.h: New file. * Makefile.in: Add rules, dependencies for cli-dump.o. * NEWS: Mention new commands. 2002-03-28 Michael Snyder * symfile.c (symbol_file_add): Move test for null symbols to later. 2002-03-27 Andrew Cagney From veksler at il.ibm.com: * utils.c (gdb_realpath): If canonicalize_file_name fails, return the xstrduped original path. Fix PR gdb/417. 2002-03-27 Michael Snyder * breakpoint.c (_initialize_breakpoint): Clean up help string. * infcmd.c (_initialize_infcmd): Ditto. * language.c (_initialize_language): Ditto. * symfile.c (_initialize_symfile): Ditto. * top.c (_init_main): Ditto. * cli/cli-cmds.c (init_cli_cmds): Ditto. 2002-03-27 Elena Zannoni * rs6000-tdep.c (struct rs6000_framedata): Add fields for AltiVec vector registers handling. (skip_prologue): Handle new AltiVec instructions. Fill in new fields of frame data. (frame_get_saved_regs): Fill in information for AltiVec registers. 2002-03-27 Jim Blandy * symtab.h (SYMBOL_INIT_MANGLED_NAME): Turn this macro's body into a function; leave this macro here to invoke that function. (symbol_init_mangled_name): Declaration for that function. * symtab.c (symbol_init_mangled_name): New function. 2002-03-27 Andrew Cagney * valarith.c: Replace strerror with safe_strerror. * tracepoint.c: Ditto. * lin-lwp.c: Ditto. * go32-nat.c: Ditto. * inflow.c: Ditto. * gnu-nat.c: Ditto. 2002-03-27 Andreas Schwab * event-top.c (command_line_handler): Remove useless if. 2002-03-27 Andreas Jaeger * dwarf2cfi.c: Give credit to Daniel Berlin, reformat copyright comment. 2002-03-27 Michal Ludvig * x86-64-tdep.h (X86_64_NUM_REGS, X86_64_NUM_GREGS): Delete #defines. (x86_64_num_regs, x86_64_num_gregs): Added extern variables. * x86-64-linux-nat.c (x86_64_regmap): Swapped RBX <> RDX, added DS, ES, FS, GS. (x86_64_linux_dr_get_status, supply_gregset), (fill_gregset): Changed X86_64_NUM_GREGS to x86_64_num_gregs. * x86-64-tdep.c (x86_64_register_raw_size_table): Delete. (x86_64_register_info_table): Add. (X86_64_NUM_REGS, X86_64_NUM_GREGS): Add. (x86_64_register_raw_size, x86_64_register_virtual_type), (x86_64_register_name, _initialize_x86_64_tdep): Changed to reflect new general x86_64_register_info_table. (i386_gdbarch_init): gdbarch_register_bytes is now set dynamicaly during initialization. * regformats/reg-x86-64.dat: Synced with changes to registers above. * gdbserver/linux-x86-64-low.c: Ditto. 2002-03-27 Daniel Jacobowitz * gdbserver/server.c (main): Call target_signal_to_host_p and target_signal_to_host on signals received from the remote. * gdbserver/remote-utils.c (prepare_resume_reply): Call target_signal_from_host on signals sent to the remote. * gdbserver/server.h: Add prototypes. Include "gdb/signals.h". * gdbserver/Makefile.in: Add signals.o. Add -I${INCLUDE_DIR}. 2002-03-27 Daniel Jacobowitz * signals/signals.c: Include "server.h" in gdbserver build. (target_signal_from_name): Don't use STREQ. (_initialize_signals): Likewise. Don't include function in gdbserver build. 2002-03-27 Daniel Jacobowitz * signals.c: Moved to... * signals/signals.c: Here. * Makefile (signals.o): Update. 2002-03-26 Jeff Law (law@redhat.com) * somread.c (som_symtab_read): Remove some commented out code and updated related comments. Do not set the minimal symbol table to mst_solib_trampoline for ST_ENTRY symbols with SS_LOCAL scope in a dynamic executable. * hppa-tdep.c (find_proc_framesize): Sanely handle the case where we are unable to find the minimal symbol for the given PC value. 2002-03-25 Jeff Law (law@redhat.com) * linux-proc.c (read_mapping): Scan up to end of line for filename. 2002-03-25 Michal Ludvig * x86-64-tdep.c (x86_64_skip_prologue): Rewritten from scratch. 2002-03-23 Andrew Cagney * command.h: Update copyright. (struct cmd_list_element): Replace definition with opaque declaration. (enum cmd_types): Document that it will eventually be moved to cli/cli-decode.h (CMD_DEPRECATED, DEPRECATED_WARN_USER): Delete macros. (MALLOCED_REPLACEMENT): Delete macro. * Makefile.in (cli_decode_h): Add $(command_h). (top.o, completer.o, maint.o): Add dependency on $(cli_decode_h). * top.c: Include "cli/cli-decode.h". * completer.c: Include "cli/cli-decode.h". * maint.c: Include "cli/cli-decode.h". * cli/cli-decode.h: Include "command.h". (enum command_class): Delete. (enum cmd_types): Comment out. (enum cmd_auto_boolean): Delete. (enum var_types): Delete. 2002-03-23 Andrew Cagney * cli/cli-decode.c: Include "gdb_assert.h". (add_set_or_show_cmd): New static function. (add_set_cmd): Rewrite. Use add_set_or_show_cmd. (add_show_from_set): Rewrite. Use add_set_or_show_cmd. Don't copy all fields, such as func, from the set command. 2002-03-23 Andrew Cagney * MAINTAINERS (sh-elf): Change warning flag to -w. 2002-03-23 Andrew Cagney * defs.h (error): Add printf format attribute. * thread-db.c (thread_from_lwp): Fix error format string. * stack.c (parse_frame_specification): Ditto. * cli/cli-decode.c (undef_cmd_error): Ditto. * scm-lang.c (scm_lookup_name): Ditto. * tracepoint.c (trace_error): Ditto. * remote-utils.c (usage): Ditto. * remote.c (compare_sections_command): Ditto. Fix PR gdb/328. 2002-03-22 Andrew Cagney * gdbtypes.c (append_composite_type_field): New function. (init_composite_type): New function. * gdbtypes.h (append_composite_type_field): Declare. (init_composite_type): Ditto. 2002-03-22 Elena Zannoni * ppc-linux-tdep.c (ppc_sysv_abi_use_struct_convention): New function. * ppc-tdep.h (ppc_sysv_abi_use_struct_convention): Export. * rs6000-tdep.c (rs6000_gdbarch_init): Use different structure returning convention for SYSV ABI case, but not for GNU/Linux, FreeBSD, or NetBSD. 2002-03-22 Daniel Jacobowitz * symtab.h (lookup_block_symbol): Add mangled_name argument to prototype. * symmisc.c (maintenance_check_symtabs): Call lookup_block_symbol with new mangled_name argument. * linespec.c (decode_line_1): Likewise. * valops (value_of_this): Likewise. * symtab.c (lookup_transparent_type): Likewise. (lookup_symbol_aux): Likewise. Accept new mangled_name argument. (lookup_symbol): If we are given a mangled name, pass it down to lookup_symbol_aux. (lookup_block_symbol): If we are given a mangled name to check against, only return symbols which match it. 2002-03-22 Christopher Faylor * win32-nat.c (child_create_inferior): Check for proper shell to use here, in case the user changes it on the fly. (_initialize_inftarg): Remove shell path considerations. 2002-03-21 Elena Zannoni * rs6000-tdep.c (rs6000_gdbarch_init): Use correct max size value for gdbarch_max_register_raw_size and max_register_virtual_size. Adjust copyright year. 2002-03-21 Daniel Jacobowitz * dbxread.c (process_one_symbol): Extend the first N_SLINE in a function to cover the entire beginning of the function as well if it does not already. 2002-03-21 Tom Rix * rs6000-nat.c (rs6000_ptrace32): Renamed from ptrace32. (rs6000_ptrace64): Renamed from ptrace64. 2002-03-20 Martin M. Hunt * gdbserver/remote-utils.c (remote_open): Don't call getprotobyname, we're all using TCP here so just use IPPROTO_TCP. * gdbserver/gdbreplay.c (remote_open): Ditto. 2002-03-20 Martin M. Hunt * regcache.c (_initialize_regcache): No need to call build_regcache() at this time; it gets called whenever the gdbarch changes. 2002-03-20 David O'Brien * sparc-nat.c: Include sys/param.h where possible. 2002-03-20 Daniel Jacobowitz Fix PR gdb/422. * c-lang.c (c_create_fundamental_type): Handle FT_COMPLEX, FT_DBL_PREC_COMPLEX, and FT_EXT_PREC_COMPLEX. * dwarf2read.c (read_base_type): Set TYPE_TARGET_TYPE for complex types. * stabsread.c (rs6000_builtin_type): Likewise. (read_sun_floating_type): Likewise. 2002-03-19 Peter Schauer * stabsread.c (read_member_functions): Remove skip code for duplicate constructor/destructor methods. Use standard parsing for these methods and just do not chain them to the list of methods after parsing. 2002-03-19 Alexandre Oliva * coffread.c: Remove redundant static declarations. Replace occurrences of `PTR' with `void *'. * elfread.c, mdebugread.c, minsyms.c, mipsread.c: Likewise. * top.h (quit_cover): Likewise. * defs.h (catch_errors): Likewise. 2002-03-18 Andrew Cagney * defs.h (XMALLOC): Define. * gdb-events.sh (XMALLOC): Delete macro. * gdb-events.c, gdb-events.h: Regenerate. * gdbarch.sh (XMALLOC): Delete macro. * gdbarch.c: Regenerate. * serial.c (XMALLOC): Delete macro. * ui-file.c (XMALLOC): Ditto. * ser-unix.h (XMALLOC): Ditto. * sh-tdep.c (XMALLOC): Ditto. * ui-out.c (XMALLOC): Ditto. * utils.c (XMALLOC): Ditto. * i386-tdep.c (XMALLOC): Ditto. * gdb-events.c (XMALLOC): Ditto. * d10v-tdep.c (XMALLOC): Ditto. * cli-out.c (XMALLOC): Ditto. * cli-out.c, d10v-tdep.c, gdb-events.c: Update copyright. * gdb-events.sh, i386-tdep.c, ser-unix.h, serial.c: Ditto. * ui-file.c, ui-out.c: Ditto. 2002-03-18 Andrew Cagney * command.h (struct cmd_list_element): Add field context. (set_cmd_context, get_cmd_context): Declare. * cli/cli-decode.h: Ditto. * cli/cli-decode.c (get_cmd_context): New function. (set_cmd_context): New function. (add_cmd): Initialize context. Part of fixing PR gdb/145 and PR gdb/146. 2002-03-17 Andrew Cagney * cli/cli-decode.c (cmd_type): New function. * command.h (cmd_type): Declare. * infrun.c (set_schedlock_func): Call function cmd_type. * kod.c (kod_set_os): Call cmd_type. * cris-tdep.c (cris_version_update): Use function cmd_type. (cris_mode_update, cris_abi_update): Ditto. * command.h: (execute_cmd_post_hook): Declare. (execute_cmd_pre_hook): Declare. * cli/cli-script.c (clear_hook_in_cleanup): New function. (execute_cmd_post_hook, execute_cmd_pre_hook): New functions. Execute pre/post hook while ensuring that afterwords hook_in is cleared. * top.c (execute_command): Use execute_cmd_post_hook, and execute_cmd_pre_hook to execute pre/post commands. * infrun.c (normal_stop): Pass stop_command and not pre_hook to hook_stop_stub. (hook_stop_stub): Call execute_cmd_pre_hook. 2002-03-17 Andrew Cagney * kod.c (kod_set_os): Revert previous change. Is called by ``info set'' and this leads to a core dump. Move xstrdup of operating_system to after check that it is not NULL. 2002-03-17 Andrew Cagney * kod.c (kod_set_os): Remove unnecessary check that ``command->type'' is set_cmd. * valprint.c (set_input_radix): Use input_radix. (set_output_radix): Use output_radix. (set_input_radix_1, set_output_radix_1): Add FIXME - bad radix isn't reverted. 2002-03-16 Andrew Cagney * value.h (struct value): Delete field ``substring_addr''. Change aligner fields to force_doublest_align, force_longest_align, force_core_addr_align and force_pointer_aligh. * value.h (struct value): Fix typo in above change. 2002-03-16 Peter Schauer * ia64-tdep.c (ia64_gdbarch_init): Call set_gdbarch_frame_args_skip, to fix internal_error from ``maintenance print architecture''. 2002-03-16 Peter Schauer * cp-valprint.c (cp_is_vtbl_ptr_type): Handle vtbl field type for gcc versions after gcc-2.8.1. 2002-03-16 Peter Schauer * eval.c (evaluate_subexp_standard): Fix setup of ``this'' pointer for method resolution. Restore adjustment of ``this'' pointer after calling value_struct_elt, which was accidentally removed during the HP merge. 2002-03-15 Andrew Cagney * eval.c (evaluate_subexp_standard): Pass ``selected_frame'' to value_of_register. * findvar.c (value_of_register): Add ``frame'' parameter. Pass to get_saved_register. * value.h (value_of_register): Update. 2002-03-14 Richard Henderson * configure.in: Detect declaration for canonicalize_file_name. * utils.c (canonicalize_file_name): Declare, if needed. (gdb_realpath): Prefer realpath if available and usable. * config.in, configure: Rebuild. 2002-03-14 Richard Henderson * dwarf2read.c (read_array_type): Accept DW_FORM_data8 as a constant array bound. * MAINTAINERS: Add myself to write-after-approval. 2002-03-14 Michael Snyder * symfile.c (syms_from_objfile): Return immediately if no syms. (symbol_file_add): Return immediately if no syms. (find_sym_fns): Return immediately if no syms. 2002-03-13 Michal Ludvig * gdbserver/remote-util.c (remote_open): Print remote-side's IP address when remote debugging over the network. 2002-03-12 David O'Brien * config/sparc/fbsd.mh: Fix copyright. * config/sparc/fbsd.mt: Likewise. 2002-03-11 Richard Earnshaw * MAINTAINERS: Fix typo in name of gdb warnings option. (x86-64): Fix formating so that this can be parsed by awk. 2002-03-10 Daniel Jacobowitz * Makefile.in (defs_h): Add $(INCLUDE_DIR)/gdb/signals.h. * defs.h: Include "gdb/signals.h". (enum target_signal): Move to $(INCLUDE_DIR)/gdb/signals.h. 2002-03-10 Michal Ludvig * x86-64-tdep.h (sys/reg.h, x86_64_regmap): Moved to x86-64-linux-nat.c * x86-64-linux-nat.c (sys/reg.h, x86_64_regmap): Moved here from x86-64-tdep.h 2002-03-10 Daniel Jacobowitz Don Howard * mips-tdep.c (ST0_FR): Define. (mips2_fp_compat): New function, temporarily disabled. (mips_read_fp_register_single): New function. (mips_read_fp_register_double): New function. (mips_print_register): Use them. (do_fp_register_row): Likewise. 2002-03-09 Andrew Cagney * MAINTAINERS: Add Jim Ingham and Klee Dienes to ``write after approval''. 2002-03-08 Peter Schauer * stabsread.c (read_member_functions): Fix is_stub test for static member functions, improve comment. 2002-03-07 Richard Earnshaw * remote-rdi.c (myprint): Replace 'PTR' with 'void *'. (mywrite, mywritec, mypause, myreadc, mygets): Likewise. (_initialize_remote_rdi): Use add_set_boolean_cmd to register commands that set boolean values. (arm_rdi_remove_breakpoint): Rewrite to avoid uninitialized warning. (arm_rdi_resume): Always initialize PC. (arm_rdi_open): Don't use rslt as a boolean. (arm_rdi_create_inferior, arm_rdi_close, arm_rdi_resume) (arm_rdi_fetch_registers, arm_rdi_store_registers) (arm_rdi_xfer_memory, arm_rdi_files_info, arm_rdi_kill) (arm_rdi_insert_breakpoint, arm_rdi_remove_breakpoint): Likewise. 2002-03-06 Alexandre Oliva * configure.in (gdb_cv_bigtoc): Check for -bbigtoc on AIX. * configure: Rebuilt. 2002-03-06 Stephane Carrez * m68hc11-tdep.c (_initialize_m68hc11_tdep): Don't set tm_print_insn. (m68hc11_gdbarch_init): But use set_gdbarch_print_insn instead. 2002-03-06 Andrew Cagney * cli/cli-decode.c (set_cmd_completer): New function. * command.h (set_cmd_completer): Declare. * cli/cli-decode.h (set_cmd_completer): Ditto. * breakpoint.c (_initialize_breakpoint): Use set_cmd_completer. * cli/cli-cmds.c (init_cli_cmds): Ditto. * win32-nat.c (_initialize_inftarg): Ditto. * remote-rdi.c (_initialize_remote_rdi): Ditto. * proc-api.c (_initialize_proc_api): Ditto. * hppa-tdep.c (_initialize_hppa_tdep): Ditto. * source.c (_initialize_source): Ditto. * exec.c (_initialize_exec): Ditto. * solib.c (_initialize_solib): Ditto. * top.c (init_main): Ditto. * tracepoint.c (_initialize_tracepoint): Ditto. * symfile.c (_initialize_symfile): Ditto. * printcmd.c (_initialize_printcmd): Ditto. * infcmd.c (_initialize_infcmd): Ditto. * corefile.c (_initialize_core): Ditto. 2002-03-05 Andrew Cagney * MAINTAINERS (Past Maintainers): Add Frank Ch. Eigler. 2002-03-05 Andrew Cagney * MAINTAINERS: Fix Mac OS X and Objective-C/C++. 2002-03-05 Andrew Cagney * NEWS: Update headings, 5.2 has branched. 2002-03-04 Daniel Jacobowitz * gdbserver/linux-low.c (PTRACE_XFER_TYPE): Change to long. (num_regs, regmap): Move inside HAVE_LINUX_USRREGS. (register_addr, REGISTER_RAW_SIZE): Likewise. (usr_store_inferior_registers): Use PTRACE_XFER_TYPE. * gdbserver/linux-x86-64-low.c: Remove extra #endif. 2002-03-03 Michal Ludvig * MAINTAINERS (x86-64): Add myself. * x86-64-tdep.c (x86_64_push_arguments): Fixed typo naregs->nregs, changed value_ptr -> struct value * 2002-03-01 David O'Brien * configure.host (sparc64-*-freebsd): Add. * configure.tgt: Likewise. * config/sparc/fbsd.mh: New file. * config/sparc/fbsd.mt: Likewise. * config/sparc/nm-fbsd.h: Likewise. * config/sparc/tm-fbsd.h: Likewise. 2002-03-01 Daniel Jacobowitz * config/djgpp/fnchange.lst: Add regformats/reg-i386-linux.dat and regformats/reg-s390x.dat. 2002-03-01 Andrew Cagney * utils.c: Add FIXME explaining true/false problem. 2002-02-28 Andrew Cagney * MAINTAINERS (Past Maintainers): Add J.T. Conklin. 2002-02-28 Michael Chastain * MAINTAINERS: Fix typo: gdb.satbs -> gdb.stabs . 2002-02-28 Daniel Jacobowitz * gdbserver/linux-s390-low.c: New file. * regformats/reg-s390.dat: New file. * regformats/reg-s390x.dat: New file. * gdbserver/configure.srv: Add S/390. * gdbserver/Makefile.in: Add S/390. * configure.tgt: Enable gdbserver for S/390. 2002-02-28 Eli Zaretskii * go32-nat.c (_initialize_go32_nat): Don't use periods in the first line of the doc string for "info dos", except at the end of the sentence, since the short help stops at the first period. 2002-02-28 Jason Merrill * dwarf2read.c (dwarf_cfi_name): Add new codes. 2002-02-27 Fred Fish * blockframe.c (generic_fix_call_dummy): Fix obvious typo in comment (dumy -> dummy). 2002-02-27 Peter Schauer * symtab.c (gdb_mangle_name): Handle fully mangled v3 abi physnames. 2002-02-27 Rodney Brown * utils.c (gdb_realpath): Add pathconf fallback for sco3.2v5. 2002-02-27 Daniel Jacobowitz * gdbserver/acconfig.h: New file. * gdbserver/i387-fp.c: New file. * gdbserver/i387-fp.h: New file. * gdbserver/linux-x86-64.c: New file. * regformats/reg-x86-64.dat: New file. * configure.tgt: Add x86_64-*-linux* gdbserver support. * gdbserver/configure.srv: Add x86_64-*-linux* and regset support. * gdbserver/configure.in: Add support for regsets. * gdbserver/config.in: Regenerate. * gdbserver/configure: Regenerate. * gdbserver/Makefile.in: Likewise. Add $(linux_low_h). * gdbserver/linux-low.h: New file. * gdbserver/linux-low.c: Include "linux-low.h". Add support for regsets. * gdbserver/linux-arm-low.c: Include "linux-low.h". * gdbserver/linux-ia64-low.c: Include "linux-low.h". * gdbserver/linux-m68k-low.c: Include "linux-low.h". * gdbserver/linux-mips-low.c: Include "linux-low.h". * gdbserver/linux-ppc-low.c: Include "linux-low.h". * gdbserver/linux-sh-low.c: Include "linux-low.h". * gdbserver/linux-i386-low.c: Include "linux-low.h". Include "i387-fp.h". Add PTRACE_GETREGS and friends. * gdbserver/regcache.c (supply_register): New function. (supply_register_by_name): New function. (collect_register): New function. (collect_register_by_name): New function. 2002-02-27 Daniel Jacobowitz * gdbserver/Makefile.in (INTERNAL_CFLAGS): Remove -DGDBSERVER. (config.status): Add configure.srv dependency. (server_h): Add config.h dependency. 2002-02-27 Daniel Jacobowitz * regformats/reg-i386-linux.dat: New file, with $orig_eax. * gdbserver/Makefile.in: Add rules for reg-i386-linux.o. * gdbserver/configure.srv: Change i386-*-linux* to use reg-i386-linux.o. 2002-02-26 Andrew Cagney * x86-64-tdep.c: Re-indent. Update copyright date. 2002-02-26 Andrew Cagney From Michal Ludvig : * x86-64-tdep.c (value.h): Delete. (gdb_assert.h): Include. (x86_64_register_convert_to_virtual, x86_64_register_convert_to_raw ): Add check which lets only floating-point values to be converted. (value_push): Delete. (x86_64_push_arguments): Order of arguments pushed on stack fixed. (i386_gdbarch_init): Number of register_bytes fixed. 2002-02-26 Andrew Cagney * MAINTAINERS: Add x86-64 target. 2002-02-26 Andrew Cagney * memattr.c (mem_command): Eliminate ``true'' and ``false''. * osfsolib.c (solib_map_sections): Ditto. * irix5-nat.c (solib_map_sections): Ditto. * corelow.c (gdb_check_format): Ditto. * symfile.c (symfile_bfd_open): Ditto. * solib.c (solib_map_sections): Ditto. Fix PR gdb/354. 2002-02-26 Andrew Cagney * remote.c (_initialize_remote): By default, disable ``e'' and ``E'' step out-of-range packets. 2002-02-26 Andreas Schwab * config/m68k/tm-linux.h (FRAME_SAVED_PC): Define as m68k_linux_frame_saved_pc. (IN_SIGTRAMP): Define as m68k_linux_in_sigtramp instead of in_sigtramp. (SIGCONTEXT_PC_OFFSET): Remove. * m68klinux-nat.c (m68k_linux_frame_saved_pc, m68k_linux_sigtramp_saved_pc): New functions. (IS_SIGTRAMP, IS_RT_SIGTRAMP): Define. (SIGCONTEXT_PC_OFFSET): Moved here from config/m68k/tm-linux.h. (UCONTEXT_PC_OFFSET): Define. (m68k_linux_in_sigtramp): Renamed from in_sigtramp, handle both non-RT and RT signal trampolines. 2002-02-26 Richard Earnshaw * config/arm/tm-embed.h (TARGET_UPAGES): Delete. (TARGET_NBPG, STACK_END_ADDR): Delete (VARIABLES_INSIDE_BLOCK): Delete. 2002-02-25 Andrew Cagney * utils.c (perror_with_name): Make string parameter constant. (print_sys_errmsg): Ditto. (query): Ditto. * defs.h (perror_with_name): Update. (print_sys_errmsg): Update. (query): Update. 2002-02-25 Daniel Jacobowitz From Eliot Dresselhaus : * gdbserver/linux-mips-low.c (cannot_fetch_register): Fix typo. 2002-02-25 Peter Schauer * rs6000-nat.c (set_host_arch): Do not switch to a new architecture if it already matches the current architecture from the exec file. Include arch-utils.h for gdbarch_info_init prototype. * Makefile.in (rs6000-nat.o): Update dependencies. 2002-02-25 Eli Zaretskii * config/djgpp/djconfig.sh: Set NM=nm and CFLAGS="-g -O2" in the list of exported variables. 2002-02-24 Daniel Jacobowitz * gdbserver/configure.srv: New file. * gdbserver/configure.in: Use configure.srv instead of the host/target makefile fragments. Set GDBSERVER_DEPFILES from it. * gdbserver/configure: Regenerated. * gdbserver/terminal.h: New file. * gdbserver/Makefile.in: Update for configure changes. Remove more unneeded include paths. 2002-02-24 Andrew Cagney From wiz at danbala: * config/sparc/tm-sp64.h: Fix grammar and typos. Fix PR gdb/287. 2002-02-24 Andrew Cagney * lin-lwp.c, thread-db.c, defs.h, cris-tdep.c: Replace ``Linux'' with either ``GNU/Linux'' or ``Linux kernel''. Update copyright. * m68klinux-nat.c, sparc-linux-nat.c, x86-64-linux-nat.c: Ditto. * x86-64-linux-tdep.c, gregset.h, gdb_wait.h: Ditto. * ia64-linux-nat.c, infrun.c, linux-proc.c: Ditto. * proc-service.c, i386-linux-tdep.c, ppc-linux-tdep.c: Ditto. * s390-tdep.c: Ditto. * config/nm-linux.h, config/alpha/nm-linux.h: Ditto. * config/alpha/tm-alpha.h, config/alpha/tm-alphalinux.h: * config/alpha/xm-alphalinux.h, config/i386/nm-linux.h: Ditto. * config/i386/nm-x86-64.h, config/i386/tm-linux.h: Ditto. * config/m68k/tm-linux.h, config/mips/nm-linux.h: Ditto. * config/mips/tm-linux.h, config/mips/xm-linux.h: Ditto. * config/powerpc/tm-linux.h, config/s390/nm-linux.h: Ditto. * config/s390/tm-linux.h, config/sh/tm-linux.h: Ditto. * config/sparc/nm-linux.h, config/sparc/tm-linux.h: Ditto. * config/sparc/tm-sp64linux.h, config/sparc/xm-linux.h: Ditto. Fix PR gdb/378. 2002-02-23 Andrew Cagney * lin-thread.c: Delete file. * configure.in (gdb_cv_struct_reg_r_gs): Update comment to refer to gdb_proc_service.h. * configure: Re-generate. * ocd.c (ocd_open): Do not try to open the "ocd" device. * serial.c (serial_open): Delete check for "ocd". Fix PR gdb/349. * Makefile.in (linux-thread.o): Delete target. * linux-thread.c: Delete file. * config/djgpp/fnchange.lst: Rename bfd/elf32-sh64.c. Tweak other renamed SH files to be consistent. * symtab.c (sort_search_symbols): Use xfree. 2002-02-23 Richard Earnshaw * arm-linux-tdep.c (arm_linux_init_abi): Register IN_SOLIB_CALL_TRAMPOLINE and SKIP_TRAMPOLINE_CODE * config/arm/tm-linux.h (IN_SOLIB_CALL_TRAMPOLINE): Replace old definition with undef, since we don't want the sysvr4 definition. (SKIP_TRAMPOLINE_CODE): Likewise. 2002-02-23 Andrew Cagney From 2002-02-22 Alfred M. Szmidt : * configure.in: (AC_CHECK_FUNCS) Added test for canonicalize_file_name Regenerated. * config.in, configure: Regenerated. * utils.c: (gdb_realpath) If HAVE_CANONICALIZE_FILE_NAME is defined use canonicalize_file_name. 2002-02-23 Michael Chastain * MAINTAINERS: Remove Michael Chastain from "paper trail" list. 2002-02-23 Andrew Cagney * README: Remove references to cygnus.com. * MAINTAINERS: Change Past Maintainer addresses to ``foo at bar dot com'' form. Remove references to cygnus.com and sourceware. 2002-02-23 Andrew Cagney From 2002-02-19 Paul Eggert : * Makefile.in (VER): Change "head -1" to "sed q", since POSIX 1003.1-2001 no longer allows "head -1". * gdb/Makefile.in (version.c): Likewise. * gdb/doc/Makefile.in (GDBvn.texi): Likewise. * gdb/CONTRIBUTE: Change "diff -c3" to "diff -c", which is equivalent. POSIX 1003.1-2001 no longer allows "diff -c3". 2002-02-23 Andrew Cagney * cli/cli-decode.c (cmd_cfunc_eq): New function. * command.h (cmd_cfunc_eq): Declare. * cli/cli-decode.h (cmd_cfunc_eq): Ditto. * cli/cli-cmds.h (is_complete_command): Change parameter to a ``struct cmd_list_element *''. * cli/cli-cmds.c (is_complete_command): Update. Use cmd_cfunc_eq. * top.c (execute_command): Pass the command to is_complete_command. * tracepoint.c: Replace function.cfunc with cmd_cfunc_eq. 2002-02-23 Andrew Cagney From 2002-02-20 Martin Schwidefsky : * config/s390/tm-s390.h (GDB_TARGET_IS_ESAME): Use renamed architecture defines. * s390-tdep.c (s390_gdbarch_init): Likewise. 2002-02-23 Richard Earnshaw * arm-linux-tdep.c (arm_linux_extract_return_value): Make static. (arm_linux_push_arguments): Likewise. (arm_linux_init_abi): Register them. Also register linux-specific call_dummy_words. (find_minsym_and_objfile): Use strcmp, not STREQ. * config/arm/tm-linux.h (CALL_DUMMY_WORDS): Delete. (arm_linux_call_dummy_words): Delete declaration. (EXTRACT_RETURN_VALUE, PUSH_ARGUMENTS): Delete. (arm_linux_extract_return_value, arm_linux_push_arguments): Delete declarations. (LOWEST_PC): Delete. 2002-02-23 Peter Schauer * maint.c (print_section_info): Do not prepend `0x' to filepos output, it will be handled by local_hex_string_custom. 2002-02-23 Richard Earnshaw * arm-linux-nat.c (store_newfpe_single): Use regcache_collect. (store_newfpe_double, store_newfpe_extended, store_fpregister) (store_register, store_regs, fill_gregset, fill_fpregset): Likewise. 2002-02-22 Jim Blandy Indicate that the bcache functions don't change the strings they're passed. * bcache.h (bcache, hash): Add `const' keywords to declarations. * bcache.c (bcache, hash): Add `const' keywords to definitions. 2002-02-22 Pierre Muller * win32-nat.c (child_create_inferior): Fix create flags setting bug. 2002-02-21 Christopher Faylor * win32-nat.c (register_loaded_dll): Just use raw name when we can't find the complete path to a loaded DLL. 2002-02-21 Fred Fish * dbxread.c (process_one_symbol): When finding an N_FUN symbol that marks the end of the range of a function, enter a line number entry that has a line number of zero and a PC offset that matches the end of the function. This starts a range of PC's for which no line number information is known. * symtab.c (find_pc_sect_line): If our best fit is in a range of PC's for which no line number info is found (line number is zero) then we didn't find any valid line information. * symtab.h: Document use of zero line number entry. 2002-02-21 Elena Zannoni * ppc-linux-nat.c (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Define. (have_ptrace_getvrregs): Define for run time checks. (gdb_vrregset_t): New type for Altivec register handling. (fetch_register, store_register): Fetch/store altivec register when needed. (fetch_altivec_register, store_altivec_register): New functions. (supply_vrregset, fill_vrregset): New functions. (fetch_altivec_registers, store_altivec_registers): New functions. (fetch_ppc_registers, store_ppc_registers): Fetch/store altivec registers as well. 2002-02-21 Jiri Smid * config/i386/x86-64linux.mh (NATDEPFILES): Remove x86-64-nat.o. 2002-02-21 Richard Earnshaw * Makefile.in (armnbsd-nat.o): Update dependencies. * armnbsd-nat.c (supply_gregset): New function. Common code to supply the integer register set. (supply_fparegset): New function. Similar for FPA registers. (fetch_regs, fetch_fp_regs): Use them. (fetch_core_registers): Likewise. (fetch_elfcore_registers): New function. (arm_netbsd_elfcore_fns): New core-file type specification. (_initialize_arm_netbsd_nat): Register it. 2002-02-21 Richard Earnshaw * armnbsd-nat.c: Include gdbcore.h. (FETCH_INFERIOR_REGISTERS): Just error if this isn't defined. (fetch_regs, fetch_fp_regs, store_regs, store_fp_regs): Add explicit 'void' to declaration, to shut up ARI. (fetch_core_registers): Make static. Rewrite using supply_register. (arm_netbsd_core_fns): New core-file type specification. (_initialize_arm_netbsd_nat): New function. 2002-02-21 Christopher Faylor * win32-nat.c (register_loaded_dll): Correctly check for invalid handle value. 2002-02-20 Christopher Faylor * win32-nat.c (register_loaded_dll): Handle case where FindFirstFile fails. 2002-02-20 Daniel Jacobowitz * jv-exp.y (parse_number): Change type of implicit longs to builtin_type_uint64. 2002-02-20 Daniel Jacobowitz * gdbserver/linux-low.c (mywait): Change argument to waitpid to be an integer instead of a `union wait'. 2002-02-20 Daniel Jacobowitz * mips-linux-nat.c: Call the operating system GNU/Linux. * mips-linux-tdep.c: Likewise. * mips-tdep.c: Likewise. 2002-02-20 Daniel Jacobowitz Fix PR gdb/265. * jv-exp.y (parse_number): Handle 64-bit integers. 2002-02-20 Daniel Jacobowitz * gdbserver/configure.in: Remove AM_PROC_CC_STDC. Change AC_STDC_HEADERS to AC_HEADER_STDC. * gdbserver/configure: Regenerated. 2002-02-20 Richard Earnshaw * arc-tdep.c (get_longjmp_target): Only compile this function if JB_PC is defined. * sparc-tdep.c (get_longjmp_target): Likewise. 2002-02-20 Richard Earnshaw * News: Add news about ARM and Multi-arch. Mention the new target arm*-*-netbsd*. 2002-02-19 Jim Blandy * stabsread.c (error_type_complaint): Improve error message. 2002-02-19 Daniel Jacobowitz * gdbserver/README: Update documentation. * gdbserver/configure.in: Update configury to match documentation. * gdbserver/Makefile.in: Likewise. * gdbserver/configure: Regenerated. * gdbserver/aclocal.m4: New file, generated by aclocal. * gdbserver/config.in: New file, generated by autoheader. 2002-02-19 Richard Earnshaw * config/djgpp/fnchange.lst: Add change rules for armnbsd-tdep.c and armnbsd-nat.c. 2002-02-19 Richard Earnshaw * arm-tdep.h (enum arm_float_model): New enum. (struct gdbarch_tdep): Add fp_model. * arm-tdep.c (arm_gdbarch_init): Set fp_model in tdep. Defer setting up floating-point conversions until we know the floating-point model in use by the inferior. Don't complain about being unable to determine the ABI of the inferior when we don't have one. (arm_extract_return_value): Support different floating-point models. (arm_store_return_value): Likewise. * armnbsd-tdep.c (arm_netbsd_aout_init_abi): Set fp_model in tdep to ARM_FLOAT_SOFT. (arm_netbsd_elf_init_abi): Set fp_model to ARM_FLOAT_SOFT_VFP. 2002-02-19 Peter Schauer * i386-tdep.c (i386_gdbarch_init): Eliminate incorrect use of ``current_gdbarch''. 2002-02-19 Richard Earnshaw * armnbsd-nat.c : ANSIfy all function declarations. (fetch_register, fetch_regs, fetch_fp_register, fetch_fp_regs): New. (fetch_inferior_registers): Re-implement in terms of above. (store_register, store_regs, store_fp_register, store_fp_regs): New. (store_inferior_registers): Re-implement in terms of above. 2002-02-19 Richard Earnshaw * arm-linux-nat.c: Linux -> GNU/Linux when not talking about the kernel. * arm-linux-tdep.c: Likewise. * config/arm/tm-linux.h: Likewise. 2002-02-19 Richard Earnshaw * configure.tgt (arm*-*-netbsd*): This variant is now fully multi-arch. * config/arm/nbsd.mt (TM_FILE): Delete. * config/arm/tm-nbsd.h: Delete. 2002-02-19 Richard Earnshaw * arm-tdep.c (arm_gdbarch_init): Initialize TARGET_CHAR_SIGNED. Initialize CALL_DUMMY_LENGTH. 2002-02-19 Richard Earnshaw * armnbsd-tdep.c (arm_netbsd_aout_in_solib_call_trampoline): New function. (arm_netbsd_aout_init_abi): Initialize IN_SOLIB_CALL_TRAMPOLINE. * config/arm/tm-nbsd.h: Don't include config/tm-nbsd.h, it only defines one thing and that is incorrect for this port. (IN_SOLIB_CALL_TRAMPOLINE): Delete. 2002-02-18 Pierre Muller * go32-nat.c: add i386-tdep.h include to import FP_REGNUM_P macro. 2002-02-18 Pierre Muller * win32-nat.c (display_selector): New function. Displays information about the information returned by GetThreadSelectorEntry API function. (display_selectors): New function. Displays the infomation of the selector given as argument, or of CS, DS ans FS selectors if no argument is given. ( _initialize_inftarg): Add "w32" as info prefix command. Add "info w32 selector" as command calling display_selectors. 2002-02-19 Pierre Muller * i386-tdep.c (get_longjmp_target): Fix compilation failure by setting dummy values to JB_PC and JB_ELEMENT_SIZE if not defined. 2002-02-18 Richard Earnshaw * config/arm/nbsd.mt (TDEPFILES): Add solib-sunos.o. 2002-02-18 Richard Earnshaw * arm-tdep.c (arm_set_call_dummy_breakpoint_offset): New function. (arm_fix_call_dummy): Call it. (arm_call_dummy_breakpoint_offset): Delete. (arm_gdbarch_init): Initialize call_dummy_breakpoint_offset. * config/arm/tm-arm.h (CALL_DUMMY_BREAKPOINT_OFFSET): Delete. 2002-02-18 Andrew Cagney * gdbarch.sh (FRAME_CHAIN_VALID): Only require at level 2. Default to func_frame_chain_valid. * gdbarch.h, gdbarch.c: Re-generate. * frame.h (FRAME_CHAIN_VALID): Delete definition. 2002-02-18 Elena Zannoni * ppc-linux-nat.c: Update copyright. (fetch_register, store_register): Add tid parameter, don't compute tid here. (fetch_ppc_registers, store_ppc_registers): Add tid parameter. Pass it along to callees. (fetch_inferior_registers, store_inferior_registers): Compute tid here, and pass it to calleed functions. (fill_gregset, supply_fpregset): Clean up formatting. 2002-02-18 Richard Earnshaw * arm-tdep.c (arm_gdbarch_init): Initialize coerce_float_to_double. * config/arm/tm-arm.h (COERCE_FLOAT_TO_DOUBLE): Delete. 2002-02-18 Richard Earnshaw * gdbarch.sh (GET_LONGJMP_TARGET): Add rule. * gdbarch.c gdbarch.h: Regenerate. * breakpoint.c (create_longjmp_breakpoint): Always compile this function. (breakpoint_reset): Test GET_LONGJMP_TARGET_P(). * infrun.c (GET_LONGJMP_TARGET): Delete default definition. (handle_inferior_event): Test GET_LONGJMP_TARGET_P(). * arm-tdep.h (struct gdbarch_tdep): Add jb_pc and jb_elt_size fields. * arm-tdep.c (arm_get_longjmp_target): New function. (arm_gdbarch_init): Initialize jb_pc to -1. If ABI handler changes this to a positive value register arm_get_longjmp_target as the longjmp handler. * arm-linux-tdep.c (arm_get_longjmp_target): Delete. (arm_linux_init_abi): Set up longjmp description in tdep. * armnbsd-nat.c (get_longjmp_target): Delete. * armnbsd-tdep.c (arm_netbsd_init_abi_common): Set up longjmp description in tdep. * config/arm/tm-nbsd.h (JB_ELEMENT_SIZE, JB_PC): Delete. (get_longjmp_target): Delete declaration. (GET_LONGJMP_TARGET): Delete. * config/arm/tm-linux.h (arm_get_longjmp_target): Delete declaration. (GET_LONGJMP_TARGET): Delete. 2002-02-17 Kevin Buettner From Peter Schauer : * ia64-tdep.c (ia64_gdbarch_init): Eliminate incorrect use of ``current_gdbarch''. 2002-02-17 Tom Tromey * cli/cli-cmds.c (compare_strings): New function. (complete_command): Only print each unique item once. * completer.h (complete_line): Declare. * completer.c (complete_line): New function. (line_completion_function): Use it. 2002-02-16 Andrew Cagney * gdbarch.sh (TARGET_LONG_DOUBLE_BIT): Default to 64. * gdbarch.h, gdbarch.c: Re-generate. 2002-02-16 Daniel Jacobowitz * valarith.c (value_x_unop): Fix decrement; support post-decrement. 2002-02-16 Daniel Jacobowitz From Peter Schauer : * valops.c (value_arg_coerce): Don't take the address of a reference to convert an argument to a reference. 2002-02-15 Christopher Faylor * win32-nat.c (get_image_name): New function. (handle_load_dll): Use get_image_name function. (get_child_debug_event): Avoid registering debug events until possibly execed process is started. (child_create_inferior): Allow invocation via shell so that command line redirection, etc. works ok. (_initialize_inftarg): Add new command: "set shell" to control whether a shell is used to start a process. 2002-02-15 Daniel Jacobowitz * gdbserver/linux-mips-low.c (cannot_fetch_register): Use find_regno instead of find_register_by_number. (cannot_store_register): Likewise. 2002-02-14 Pierre Muller * dwarf2read.c: Replace fprintf (stderr, ...) by fprintf_unfiltered (gdb_stderr, ...). 2002-02-15 Daniel Jacobowitz * gdbserver/gdbserver.1: Document --attach. 2002-02-15 Richard Earnshaw * arm-tdep.h (struct gdbarch_tdep): Add fields for breakpoint descriptions. * arm-tdep.c (arm_default_arm_le_breakpoint) (arm_default_arm_be_breakpoint, arm_default_thumb_le_breakpoint) (arm_default_thumb_be_breakpoint): New. Initialize them from traditional breakpoint defines. (arm_breakpoint_from_pc): Use new gdbarch_tdep entries. (arm_gdbarch_init): Initialize new breakpoint variables. * arm-linux-tdep.c (arm_linux_arm_le_breakpoint): New. (arm_linux_init_abi): Initialize linux-specific breakpoint. * armnbsd-tdep.c (arm_nbsd_arm_le_breakpoint): New. (arm_netbsd_aout_init_abi, arm_netbsd_elf_init_abi): Split common code out to ... (arm_netbsd_init_abi_common): ... here; new function. * config/arm/tm-arm.h (ARM_LE_BREAKPOINT, ARM_BE_BREAKPOINT) (THUMB_LE_BREAKPOINT, THUMB_BE_BREAKPOINT): Delete. * config/arm/tm-linux.h (ARM_LE_BREAKPOINT): Delete. * config/arm/tm-nbsd.h (ARM_LE_BREAKPOINT): Delete. 2002-02-15 Richard Earnshaw * arm-tdep.h (enum arm_abi): New enum. (struct gdbarch_tdep): New structure. (LOWEST_PC): Provide a default. (arm_gdbarch_register_os_abi): Declare new function. * arm-tdep.c (arm_abi_names): New array. (process_note_abi_tag_sections): New function. (get_elfosabi): New function. (arm_gdbarch_register_os_abi): New function. (arm_gdbarch_init): Try to determine the ABI of the inferior. If support for that ABI has been built in, then call the appropriate configuration routine. Use gdbarch_num_regs() to get the number of registers. (arm_dump_tdep): New function. (arm_init_abi_eabi_v1, arm_init_abi_eabi_v2, arm_init_abi_apcs): New place-holder functions. (_initialize_arm_tdep): Register them. * config/arm/tm-arm.h (LOWEST_PC): Delete. * armnbsd-tdep.c: New file. * Makefile.in (armnbsd-tdep.o): Add dependencies. * config/arm/nbsd.mt (TDEPFILES): Add it. * config/arm/tm-nbsd.h (LOWEST_PC): Delete. * armnbsd-nat.c: Include regcache.h. * Makefile.in (armnbsd-nat.o): Update dependency list. * arm-tdep.c (arm_get_next_pc): Use printf_filtered for error message. 2002-02-14 Daniel Jacobowitz * gdbserver/Makefile.in: Fix typos in target rules. 2002-02-14 Daniel Jacobowitz Fix part of PR gdb/267. * linespec.c (find_methods): Handle constructors specially for now. 2002-02-14 Corinna Vinschen * arm-tdep.c (arm_push_arguments): Eliminate special float type handling. * config/arm/tm-arm.h (COERCE_FLOAT_TO_DOUBLE): Define to call standard_coerce_float_to_double(). 2002-02-14 Christopher Faylor * config/i386/xm-cygwin.h: Revert inadvertent reinclusion of GDBINIT_FILENAME. 2002-02-14 Elena Zannoni * rs6000-tdep.c (rs6000_gdbarch_init): Don't call find_variant_by_name, because it confuses the multiarch framework. Return NULL if there isn't an architecture with the user supplied name, instead of forcing a different one without recording the change with the multiarch machinery. (find_variant_by_name): Delete. 2002-02-14 Peter Schauer * config/i386/i386sol2.mh (NATDEPFILES): Add i387-nat.o, needed by i386v4-nat.o now. Add gcore.o, Solaris x86 supports gcore. 2002-02-13 Martin M. Hunt * stack.c (print_frame_info_base): When calling print_frame_info_listing_hook, set current_source_symtab. 2002-02-14 Daniel Jacobowitz * gdbserver/Makefile.in: Add regformats directory to INCLUDE_CFLAGS, and remove unused $(INCLUDE_DIR). Add regcache.c to OBS. Add generated register protocol files to clean target. Update dependencies for new objects, obsolete old target code. * gdbserver/linux-low.c: Remove all platform-specific code to new files. Remove various dead code. Update to use regcache functionality. * gdbserver/remote-utils.c (fromhex): Add return statement to quiet warning. (putpkt): Dynamically allocate buf2 because PBUFSIZ is no longer constant. (input_interrupt): Add integer parameter to match prototype of a signal handler. (outreg): Use register_data (). (prepare_resume_reply): Use gdbserver_expedite_regs. * gdbserver/server.c (main): Dynamically allocate own_buf because PBUFSIZ is no longer constant. Use registers_to_string () and registers_from_string (). * gdbserver/server.h: No longer include "defs.h". Add prototypes for error (), fatal (), and warning (). Update definition of PBUFSIZ to use regcache functionality. Add include guard. * gdbserver/utils.c (fatal): Add missing ``const''. (warning): New function. * regformats/regdat.sh: Include "regcache.h" in generated files. Provide init_registers () function. * regformats/regdef.h: Add prototype for set_register_cache (). Add include guard. * gdbserver/linux-arm-low.c: New file. * gdbserver/linux-i386-low.c: New file. * gdbserver/linux-ia64-low.c: New file. * gdbserver/linux-m68k-low.c: New file. * gdbserver/linux-mips-low.c: New file. * gdbserver/linux-ppc-low.c: New file. * gdbserver/linux-sh-low.c: New file. * gdbserver/regcache.c: New file. * gdbserver/regcache.h: New file. * gdbserver/low-linux.c: Removed obsolete file. 2002-02-14 Daniel Jacobowitz * config/arm/linux.mt: Update GDBSERVER_DEPFILES. * config/i386/linux.mt: Likewise. * config/ia64/linux.mt: Likewise. * config/m68k/linux.mh: Likewise. * config/powerpc/linux.mh: Likewise. * config/mips/linux.mt: Likewise. * config/sh/linux.mt: Add GDBSERVER_DEPFILES. * config/i386/i386lynx.mh: Mark gdbserver variables as (currently) obsolete for this target. * config/i386/nbsd.mt: Likewise. * config/i386/nbsdelf.mt: Likewise. * config/m32r/m32r.mt: Likewise. * config/m68k/m68klynx.mh: Likewise. * config/m68k/nbsd.mt: Likewise. * config/m68k/sun3os4.mh: Likewise. * config/mips/vr5000.mt: Likewise. * config/ns32k/nbsd.mt: Likewise. * config/pa/hppabsd.mh: Likewise. * config/pa/hppaosf.mh: Likewise. * config/powerpc/nbsd.mt: Likewise. * config/rs6000/rs6000lynx.mh: Likewise. * config/s390/s390.mt: Likewise. * config/s390/s390x.mt: Likewise. * config/sparc/sparclynx.mh: Likewise. * config/sparc/sun4os4.mh: Likewise. * config/i386/x86-64linux.mt: Likewise. * config/sparc/linux.mh: Likewise. 2002-02-14 Daniel Jacobowitz * configure.tgt: Configure gdbserver only for known working targets. Set ${build_gdbserver} instead of modifying ${configdirs}. * configure.in: Check ${build_gdbserver}. Put gdbserver/ into SUBDIRS if it is configured. Update comment for ${nativefile}. * configure: Regenerated. 2002-02-13 Michael Snyder * gcore.c (gcore_command): Use gcore_default_target instead of NULL. (default_gcore_mach): Just return 0, work around a problem in bfd. (default_gcore_target): OK to return NULL if exec_bfd is null. (make_mem_sec): Use a cast, avoid a warning. * procfs.c (find_memory_regions_callback): Use a cast instead of calling host_pointer_to_address (which complains if sizeof (host pointer) != sizeof (target pointer)). (procfs_make_note_section): Avoid overflow in psargs string. * procfs.c (procfs_make_note_section): Make the default implementation return an error. 2002-02-13 Rodney Brown * procfs.c (procfs_make_note_section): Provide a default definition (for alpha-dec-osf4.0f). Fix typos. 2002-02-13 Elena Zannoni * linux-proc.c: Add include of regcache.h. * Makefile.in (linux-proc.o): Add dependency on regcache.h. 2002-02-13 Andrew Cagney From 2002-01-18 Greg McGary : * memattr.c (create_mem_region): Disallow useless empty region. Regions are half-open intervals, so allow [A..B) [B..C) as non-overlapping. 2002-02-13 Michael Chastain * defs.h: Kill CONST_PTR. * c-lang.h (c_builtin_types): Change CONST_PTR to simple "const". * c-lang.c (c_builtin_types): Likewise. * ch-lang.c (ch_builtin_types): Likewise. * f-lang.c (f_builtin_types): Likewise. * language.c (unknown_builtin_types): Likewise. * m2-lang.c (m2_builtin_types): Likewise. * p-lang.c (pascal_builtin_types): Likewise. * scm-lang.c (c_builtin_types): Likewise. 2002-02-13 Keith Seitz * arm-tdep.h (arm_get_next_pc): Add declaration. 2002-02-13 Richard Earnshaw * arm-tdep.c (arm_use_struct_convention): Make static. Move to be with other related struct-returning functions. (arm_extract_struct_value_address): New function. (arm_gdbarch_init): Initialize the above in multi-arch vector. Also initialize float_format, double_format and long_double_format as appropriate to the endianness of the target. * config/arm/tm-arm.h (TARGET_DOUBLE_FORMAT): Delete. (arm_use_struct_convention): Delete declaration. (USE_STRUCT_CONVENTION, EXTRACT_STRUCT_VALUE_ADDRESS): Delete. 2002-02-13 Keith Seitz * defs.h (core_addr_to_string_nz): New function. 2002-02-13 Mark Kettenis Apply missing bits of 2002-01-15 patch. * i386v4-nat.c (supply_fpregset): Use i387_supply_fsave. (fill_fpregset): Use i387_fill_fsave. 2002-02-12 Keith Seitz * utils.c (core_addr_to_string): Use phex instead of phex_nz. (core_addr_to_string_nz): New function. 2002-02-11 Richard Earnshaw * arm-linux-nat.c: Really include arm-tdep.h. * config/arm/tm-linux.h (struct type, struct value): Declare. 2002-02-11 Michael Snyder * procfs.c: Include elf-bfd.h (for elfcore_write functions). (gcore section): Ifdef for Solaris and Unixware only. (procfs_do_thread_registers): Unixware needs one lwpstatus per thread (not one prstatus or pstatus). (procfs_make_note_section): Iterate only over kernel threads (lwps), not over all gdb threads. For unixware, call elfcore_write_pstatus once before iterating over threads. 2002-02-11 Richard Earnshaw * arm-tdep.h: New file. * arm-tdep.c: Include arm-tdep.h. (arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call) (arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy) (arm_print_float_info, arm_register_type, convert_to_extended) (arm_elf_make_msymbols_special, arm_coff_make_msymbol_special) (arm_extract_return_value, arm_register_name): Make static. (arm_software_single_step): Similarly. Fix types in declaration. (arm_register_byte, arm_register_raw_size, arm_register_virtual_size) (arm_store_return_value, arm_store_struct_return): New functions. (arm_gdbarch_init): Register the above functions. Also register call_dummy_start_offset, sizeof_call_dummy_words, function_start_offset, inner_than, decr_pc_after_break, fp_regnum, sp_regnum, pc_regnum, register_bytes, num_regs, max_register_raw_size, max_register_virtual_size, register_size. Set up prologue_cache.saved_regs here, rather than ... (_initialize_arm_tdep): ... here. * config/arm/tm-arm.h (struct type, struct value): Delete forward declarations. (arm_addr_bits_remove, arm_smash_text_address, arm_saved_pc_after_call) (arm_skip_prologue, arm_call_dummy_words, arm_fix_call_dummy) (arm_print_float_info, arm_register_type, convert_to_extended) (arm_elf_make_msymbols_special, arm_coff_make_msymbol_special) (arm_extract_return_value, arm_register_name): Delete declarations. (SMASH_TEXT_ADDRESS, ADDR_BITS_REMOVE, FUNCTION_START_OFFSET) (SKIP_PROLOGUE, SAVED_PC_AFTER_CALL, INNER_THAN, BREAKPOINT_FROM_PC) (DECR_PC_AFTER_BREAK, PRINT_FLOAT_INFO, REGISTER_SIZE, NUM_REGS) (REGISTER_NAME, REGISTER_BYTES, REGISTER_BYTE, REGISTER_RAW_SIZE) (REGISTER_VIRTUAL_SIZE, MAX_REGISTER_RAW_SIZE) (MAX_REGISTER_VIRTUAL_SIZE, REGISTER_VIRTUAL_TYPE, STORE_STRUCT_RETURN) (EXTRACT_RETURN_VALUE, STORE_RETURN_VALUE, CALL_DUMMY_WORDS) (SIZEOF_CALL_DUMMY_WORDS, CALL_DUMMY_START_OFFSET, FIX_CALL_DUMMY) (SOFTWARE_SINGLE_STEP_P, SOFTWARE_SINGLE_STEP) (ELF_MAKE_MSYMBOL_SPECIAL, COFF_MAKE_MSYMBOL_SPECIAL) Delete. (arm_pc_is_thumb, arm_pc_is_thumb_dummy, thumb_get_next_pc) (arm_get_next_pc): No-longer static -- these are needed by the RDI interface. * arm-linux-nat.c arm-linux-tdep.c armnbsd-nat.c: Include arm-tdep.h. * remote-rdi.c remote-rdp.c: Likewise. * Makefile.in (arm-linux-nat.o, arm-linux-tdep.o arm-tdep.o) (armnbsd-nat.o, remote-rdi.o, remote_rdp.o): Update dependencies. * config/arm/tm-nbsd.h (SOFTWARE_SINGLE_STEP_P): Delete bogus definition. * arm-tdep.h (ARM_A1_REGNUM, ARM_A4_REGNUM, ARM_AP_REGNUM) (ARM_SP_REGNUM, ARM_LR_REGNUM, ARM_PC_REGNUM, ARM_F0_REGNUM) (ARM_F3_REGNUM, ARM_F7_REGNUM, ARM_FPS_REGNUM, ARM_PS_REGNUM): Renamed from non-ARM_ prefixed definitions. * arm-tdep.c armnbsd-nat.c arm-linux-nat.c arm-linux-tdep.c: Update all uses of above. * remote-rdi.c remote-rdp.c: Likewise. * arm-linux-nat.c (ARM_CPSR_REGNUM): Renamed from CPSR_REGNUM. 2002-02-11 Richard Earnshaw * arm-tdep.c (arm_frameless_function_invocation) (arm_frame_args_address, arm_frame_locals_address, arm_frame_num_args) (arm_frame_chain, arm_init_extra_frame_info, arm_frame_saved_pc) (arm_read_fp, arm_frame_init_saved_regs, arm_push_dummy_frame) (arm_pop_frame, arm_get_next_pc): Make static. (arm_gdbarch_init): Register above in gdbarch structure. (arm_read_fp): Renamed from arm_target_read_fp. (arm_pc_is_thumb, arm_pc_is_thumb_dummy): Make static. * config/arm/tm-arm.h (arm_frameless_function_invocation) (arm_frame_args_address, arm_frame_locals_address, arm_frame_num_args) (arm_frame_chain, arm_init_extra_frame_info, arm_frame_saved_pc) (arm_target_read_fp, arm_frame_init_saved_regs, arm_push_dummy_frame) (arm_pop_frame, arm_get_next_pc, arm_pc_is_thumb) (arm_pc_is_thumb_dummy): Delete declarations. (INIT_EXTRA_FRAME_INFO, TARGET_READ_FP, FRAME_CHAIN) (FRAMELESS_FUNCTION_INVOCATION, FRAME_SAVED_PC, FRAME_ARGS_ADDRESS) (FRAME_LOCALS_ADDRESS, FRAME_NUM_ARGS, FRAME_ARGS_SKIP) (FRAME_INIT_SAVED_REGS, PUSH_DUMMY_FRAME, POP_FRAME): Delete. 2002-02-10 Daniel Jacobowitz * symtab.c (compare_search_syms): New function. (sort_search_symbols): New function. (search_symbols): Sort symbols after searching rather than before. 2002-02-10 Andrew Cagney * NEWS: Linux -> GNU/Linux. 2002-02-10 Andrew Cagney * gdbarch.sh: For for level one methods, disallow a definition when partially multi-arched. Add comments explaining rationale. * gdbarch.h: Re-generate. 2002-02-10 Andrew Cagney * gdbarch.sh (EXTRA_STACK_ALIGNMENT_NEEDED): Don't require when multi-arch partial. 2002-02-10 Andrew Cagney * gdbarch.sh: Map LEVEL onto a symbolic GT_LEVEL. Exit on bad field. Use diff -u. * gdbarch.c: Re-generate. 2002-02-10 Andrew Cagney * config/mips/tm-mips.h (CALL_DUMMY_LOCATION): Delete. * gdbarch.sh (PUSH_RETURN_ADDRESS): Don't require when multi-arch partial. 2002-02-10 Andrew Cagney * gdbarch.sh (REGISTER_CONVERTIBLE): Don't require when multi-arch partial. (PUSH_ARGUMENTS): Switch to using predefault. * gdbarch.c: Regenerate. 2002-02-10 Andrew Cagney * valops.c (PUSH_ARGUMENTS): Delete definition. * gdbarch.sh (PUSH_ARGUMENTS): Don't require when multi-arch partial. Default to default_push_arguments. * gdbarch.h, gdbarch.c: Regenerate. 2002-02-09 Andrew Cagney * defs.h (throw_exception): Rename return_to_top_level. Update comments. * utils.c (error_stream, internal_verror, quit): Ditto. * top.c (throw_exception, catcher): Ditto. * sparclet-rom.c (sparclet_load): Ditto. * remote.c (interrupt_query, minitelnet): Ditto. * remote-sds.c (interrupt_query): Ditto. * remote-mips.c (mips_error, mips_kill): Ditto. * ocd.c (interrupt_query): Ditto. * monitor.c (monitor_interrupt_query): Ditto. * m3-nat.c (suspend_all_threads, thread_resume_command): Ditto. * target.h: Update comment. * m3-nat.c, ocd.c, sparclet-rom.c: Update copyright. 2002-02-09 Andrew Cagney * gdbarch.sh (TARGET_LONG_DOUBLE_FORMAT): Default to default_double_format. * gdbarch.h, gdbarch.c: Re-generate. * findvar.c (floatformat_unknown): Delete variable definition. * doublest.h (floatformat_unknown): Delete variable declaration. 2002-02-09 Jim Blandy * stabsread.c (read_type): Add code to parse Sun's syntax for prototyped function types. 2002-02-09 Andrew Cagney * Makefile.in (SUBDIR_CLI_INITS): Set to SUBDIR_CLI_SRCS. (SUBDIR_MI_INITS): Set to SUBDIR_MI_SRCS. 2002-02-09 Peter Schauer * xcoffsolib.c (_initialize_xcoffsolib): Renamed from _initialize_solib. Fixes name clash with solib.c:_initialize_solib, now _initialize_xcoffsolib gets called again and overrides the commands from solib.c in a native configuration. 2002-02-09 Mark Kettenis * doublest.c (store_typed_floating): Don't try to return a value. Fixes PR gdb/290. 2002-02-08 Jim Blandy * c-typeprint.c (c_type_print_varspec_suffix): If a function type is prototyped and has no arguments, print its argument list as `(void)'. 2002-02-08 Chris Demetriou * MAINTAINERS (write-after-approval): Add myself. (paper-trail): I've escaped! 2002-02-08 Christopher Faylor * win32-nat.c (cygwin_pid_to_str): Revert 2002-02-08 change xasprintf changes. (_initialize_check_for_gdb_ini): Ditto. 2002-02-08 Martin M. Hunt * win32-nat.c (cygwin_pid_to_str): Fix typo. xaprintf -> xasprintf. 2002-02-08 Pierre Muller * win32-nat.c: Remove use of printf and sprintf functions. 2002-02-08 Richard Earnshaw * arm-tdep.c (arm_frame_chain_valid): Make static. (arm_push_arguments): Likewise. (arm_gdbarch_init): New function. (_initialize_arm_tdep): Call it. * config/arm/tm-arm.h (GDB_MULTI_ARCH): Set to 1. (TARGET_DOUBLE_FORMAT): Test TARGET_BYTE_ORDER, not target_byte_order. (FRAME_CHAIN_VALID): Delete. (arm_frame_chain_valid): Delete declaration. (PUSH_ARGUMENTS): Delete. (arm_push_arguments): Delete declaration. (CALL_DUMMY_P): Delete. 2002-02-08 Andrew Cagney Corinna Vinschen * gdbtypes.c (build_gdbtypes): Disable setting a specific float format on builtin float types. 2002-02-08 Daniel Jacobowitz * utils.c: Include before "bfd.h". * tui/tui-hooks.c: Likewise. * tui/tui.c: Likewise. * tui/tuiCommand.c: Likewise. * tui/tuiData.c: Likewise. * tui/tuiDataWin.c: Likewise. * tui/tuiDisassem.c: Likewise. * tui/tuiGeneralWin.c: Likewise. * tui/tuiIO.c: Likewise. * tui/tuiLayout.c: Likewise. * tui/tuiRegs.c: Likewise. * tui/tuiSource.c: Likewise. * tui/tuiSourceWin.c: Likewise. * tui/tuiStack.c: Likewise. * tui/tuiWin.c: Likewise. 2002-02-07 Elena Zannoni * sh-tdep.c (sh_nofp_frame_init_saved_regs): Extend where[] array to include space for pseudoregs as well. Update loops accordingly. (sh_fp_frame_init_saved_regs): Ditto. (sh_init_extra_frame_info, sh_pop_frame): Split long lines. 2002-02-07 Andrew Cagney * MAINTAINERS: Andreas Schwab is GNU/Linux m68k maintainer. Add Richard Earnshaw to Arm maintainers. 2002-02-07 Andrew Cagney * defs.h (warning_begin): Delete declaration. * config/powerpc/tm-ppcle-eabi.h (TARGET_BYTE_ORDER_DEFAULT): Delete macro. 2002-02-07 Michael Snyder * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Logic bug, remove misplaced else. 2002-02-07 Klee Dienes * fork-inferior.c (fork_inferior): Add '!' to the list of characters that need to be quoted when building a string for the shell. Quote '!' specifically with a backslash, since CSH chokes when trying to evaluate "str!str". 2002-02-06 Nick Clifton * rdi-share/host.h: Only provide a typedef for bool if it is not defined. 2002-02-04 Michael Snyder * breakpoint.h (enum bptype): Add new overlay event bp type. (enable_overlay_breakpoints, disable_overlay_breakpoints): Export. * breakpoint.c (create_internal_breakpoint): New function. (internal_breakpoint_number): Moved into create_internal_breakpoint. (create_longjmp_breakpoint): Use create_internal_breakpoint. (create_thread_event_breakpoint): Ditto. (create_solib_event_breakpoint): Ditto. (create_overlay_event_breakpoint): New function. (enable_overlay_breakpoints, disable_overlay_breakpoints): New funcs. (update_breakpoints_after_exec): Delete and re-initialize overlay event breakpoints after an exec. Add FIXME comment about longjmp breakpoint. (print_it_typical): Ignore overlay event breakpoints. (print_one_breakpoint): Ditto. (mention): Ditto. (bpstat_what): Do not stop for overlay event breakpoints. (delete_breakpoint): Don't delete overlay event breakpoints. (breakpoint_re_set_one): Delete the overlay event breakpoint. (breakpoint_re_set): Re-create overlay event breakpoint. * symfile.c (overlay_auto_command): Enable overlay breakpoints. (overlay_manual_command): Disable overlay breakpoints. (overlay_off_command): Disable overlay breakpoints. 2002-02-06 Richard Earnshaw * arm-tdep.c: Include elf-bfd.h and coff/internal.h. (MSYMBOL_SET_SPECIAL, MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Move defines to here from config/tm-arm.h. (coff_sym_is_thumb): Make static. (arm_elf_make_msymbol_special): New function. (arm_coff_make_msymbol_special): New function. * config/arm/tm-arm.h (MSYMBOL_SET_SPECIAL): Delete definition. (MSYMBOL_IS_SPECIAL, MSYMBOL_SIZE): Likewise. (coff_sym_is_thumb): Delete declaration. (arm_elf_make_msymbol_special): Declare. (arm_coff_make_msymbol_special): Declare. (ELF_MAKE_MSYMBOL_SPECIAL): Call arm_elf_make_msymbol_special. (COFF_MAKE_MSYMBOL_SPECIAL): Call arm_coff_make_msymbol_special. 2002-02-06 Richard Earnshaw * arm-tdep.c (arm_software_single_step): ANSIfy function declaration. 2002-02-06 Richard Earnshaw * gdbarch.sh (PRINT_FLOAT_INFO): Add rule. * gdbarch.c gdbarch.h: Regenerate. * arch-utils.c (default_print_float_info): New function. * arch-utils.h (default_print_float_info): Prototype it. * infcmd.c (float_info): Call PRINT_FLOAT_INFO. * doc/gdbint.texinfo (FLOAT_INFO): Mark as deprecated. (PRINT_FLOAT_INFO): Document it. * arm-tdep.c (arm_print_float_info): Renamed from arm_float_info. * config/arm/tm-arm.h (FLOAT_INFO): Delete. (PRINT_FLOAT_INFO): Define. 2002-02-06 Pierre Muller * win32-nat.c (_initialize_check_for_gdb_ini): Add typecast to sprintf argument to suppress a warning. 2002-02-05 Pierre Muller * win32-nat.c (last_sig): Changed type of variable to target_signal, to allow easier handling of pass state. (DEBUG_EXCEPTION_SIMPLE): New macro, used in handle_exception, that gives exception name and address. (handle_exception): Use DEBUG_EXCEPTION_SIMPLE macro and set last_sig value to ourstatus->value.sig. Some missing exceptions added. (child_continue): Correctly report continue_status. (get_child_debug_event,do_initial_child_stuff): Set last_sig to TARGET_SIGNAL_0 (new default value). (child_resume): consider sig argument passed to decide if the exception should be passed to debuggee or not. 2002-02-05 Michael Snyder * regcache.c (fetch_register): Call target_fetch_register only if we don't call FETCH_PSEUDO_REGISTER. (store_register): Call target_store_register only if we don't call STORE_PSEUDO_REGISTER. 2002-02-05 Elena Zannoni * gdbarch.sh: Add definitions for COFF_MAKEMSYMBOL_SPECIAL and ELF_MAKE_MSYMBOL_SPECIAL. * gdbarch.c, gdbarch.h: Regenerate. * arch-utils.c (default_make_msymbol_special): New function. * arch-utils.h (default_make_msymbol_special): Export. * elfread.c (elf_symtab_read): Compile use of ELF_MAKE_MSYMBOL_SPECIAL unconditionally because it is now multiarched. * coffread.c (coff_symtab_read): Ditto, for COFF_MAKE_MSYMBOL_SPECIAL. 2002-02-05 Jim Blandy * solib-svr4.c (svr4_truncate_ptr): New function. (svr4_relocate_section_addresses): Do the address arithmetic with the appropriate truncation for target addresses, even when CORE_ADDR is larger than a target address. 2002-02-05 Daniel Jacobowitz * gdbserver/linux-low.c (mywait): Cast second argument of waitpid to (int *). 2002-02-05 Daniel Jacobowitz * gdbserver/linux-low.c (kill_inferior): Remove commented out code. 2002-02-05 Daniel Jacobowitz * c-valprint.c (c_val_print): Handle TYPE_CODE_COMPLEX. 2002-02-05 Daniel Jacobowitz * gdbserver/linux-low.c: Remove unused include files. 2002-02-05 Daniel Jacobowitz * gdbserver/linux-low.c: Define PTRACE_ARG3_TYPE. (read_inferior_memory): Use it. (write_inferior_memory): Likewise. 2002-02-05 Daniel Jacobowitz * gdbserver/linux-low.c (create_inferior): Call strerror instead of grubbing through sys_errlist. 2002-02-05 Daniel Jacobowitz * gdbserver/linux-low.c: New file, copied exactly from low-linux.c. 2002-02-04 Pierre Muller * win32-nat.c (handle_exception): Handle Ctrl-Break exception. 2002-02-04 Andrew Cagney * cli/cli-decode.c (do_cfunc, set_cmd_cfunc): New functions. (do_sfunc, set_cmd_sfunc): New functions. * command.h (struct cmd_list_element): Add field func. * cli/cli-decode.h (struct cmd_list_element): Ditto. * command.h (set_cmd_sfunc, set_cmd_cfunc): Declare. * cli/cli-decode.h: Ditto. * cli/cli-decode.c (help_cmd): Test for func not cfunc/sfunc. (help_all, help_cmd_list): Ditto. (find_cmd, complete_on_cmdlist): Ditto. * top.c (execute_command): Ditto. * cli/cli-setshow.c (do_setshow_command): Call func instead of function.sfunc. * infcmd.c (notice_args_read): Fix function signature. * cli/cli-cmds.c (init_cli_cmds): Use set_cmd_sfunc. * cli/cli-decode.c (add_set_cmd): Ditto. * utils.c (initialize_utils): Ditto. * maint.c (_initialize_maint_cmds): Ditto. * infrun.c (_initialize_infrun): Ditto. * demangle.c (_initialize_demangler): Ditto. * remote.c (add_packet_config_cmd): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * cris-tdep.c (_initialize_cris_tdep): Ditto. * proc-api.c (_initialize_proc_api): Ditto. * kod.c (_initialize_kod): Ditto. * valprint.c (_initialize_valprint): Ditto. * top.c (init_main): Ditto. * infcmd.c (_initialize_infcmd): Ditto. * corefile.c (_initialize_core): Ditto. * arm-tdep.c (_initialize_arm_tdep): Ditto. * arch-utils.c (initialize_current_architecture): Ditto. (_initialize_gdbarch_utils): Ditto. * alpha-tdep.c (_initialize_alpha_tdep): Ditto. * cli/cli-decode.c (add_cmd): Use set_cmd_cfunc. * wince.c (_initialize_inftarg): Ditto. * symfile.c (_initialize_symfile): Ditto. * mips-tdep.c (_initialize_mips_tdep): Ditto. * language.c (_initialize_language): Ditto. * arc-tdep.c (_initialize_arc_tdep): Ditto. 2002-02-04 Michael Snyder * memattr.c (_initialize_mem): Elaborate the help for 'mem' command. 2002-02-04 Daniel Jacobowitz * gdbserver/Makefile.in: Add regformats directory to INCLUDE_CFLAGS. Add rules for building the register data files. 2002-02-04 Daniel Jacobowitz * regformats/regdat.sh: Add braces to the definition of expedite_regs_${arch}. 2002-02-04 Daniel Jacobowitz * regformats/regdef.h (struct reg): Add comment describing the requirements for offset and size fields. 2002-02-04 Andreas Schwab * config/ia64/linux.mh: Don't set NAT_CLIBS and REGEX. * config/ia64/linux.mt: Don't set GDBSERVER_LIBS. 2002-02-04 Richard Earnshaw * gdbarch.sh (copyright): Update years in generated header. (SMASH_TEXT_ADDRESS): Add rule. * gdbarch.h, gdbarch.c: Re-generate. * coffread.c: Multi-arch uses of SMASH_TEXT_ADDRESS. * dbxread.c: Likewise. * dwarfread.c: Likewise. * elfread.c: Likewise. * somread.c: Likewise. * arm-tdep.c (arm_smash_text_address): New function. * config/arm/tm-arm.h (SMASH_TEXT_ADDRESS): Define in terms of above. 2002-02-04 Pierre Muller Add support for hardware watchpoints on win32 native. * win32-nat.c (CONTEXT_DEBUG_DR macro): Add use of CONTEXT_DEBUG_REGISTERS. (dr variable): New variable. Static array containing a local copy of debug registers. (debug_registers_changed): New variable. Reflects when debug registers are changed and need to be written to inferior. (debug_registers_used): New variable. Reflects when any debug register was set, used when new threads are created. (cygwin_set_dr, cygwin_set_dr7, cygwin_get_dr6): New functions used by i386-nat code. (thread_rec): Set dr array if id is the thread of current_event . (child_continue, child_resume): Change the debug registers for all threads if debug_registers_changed. (child_add_thread): Change the debug registers if debug_registers_used. * config/i386/cygwin.mh: Add use of i386-nat.o file. Link nm.h to new nm-cygwin.h file. + config/i386/nm-cygwin.h: New file. Contains the macros used for use of hardware registers. 2002-02-03 Andrew Cagney * valprint.c (print_floating): Allow non TYPE_CODE_FLT types. Restore behavour broken by 2002-01-20 Andrew Cagney IEEE_FLOAT removal. 2002-02-03 Daniel Jacobowitz * c-valprint.c (c_val_print): Pass a proper valaddr to cp_print_class_method. * valops.c (search_struct_method): If there is only one method and args is NULL, return that method. 2002-02-03 Daniel Jacobowitz * gdbtypes.c (init_simd_type): Use TYPE_TAG_NAME instead of accessing tag_name directly. 2002-02-03 Daniel Jacobowitz * ax-gdb.c (find_field): Use TYPE_TAG_NAME instead of accessing tag_name directly. 2002-02-03 Daniel Jacobowitz PR gdb/280 * gdbtypes.c (replace_type): New function. * gdbtypes.h (replace_type): Add prototype. * stabsread.c (read_type): Use replace_type. 2002-02-03 Richard Earnshaw * Makefile.in (memattr.o): Add missing dependencies rule. 2002-02-03 Peter Schauer * breakpoint.c (break_at_finish_command): Really export. (break_at_finish_at_depth_command): Ditto. (tbreak_at_finish_command): Ditto. * hppa-tdep.c: Include completer.h. * Makefile.in (hppa-tdep.o): Add dependency on $(completer_h). (COMMON_OBS): Remove duplicate ui-file.o, frame.o, doublest.o. 2002-02-01 Andrew Cagney * utils.c (do_write): New function. (error_stream): Rewrite combining the code from error_begin and verror. (verror): Rewrite using error_stream. (error_begin): Delete function. 2002-02-01 Andrew Cagney * utils.c (error_begin): Make static. * defs.h (error_begin): Delete declaration. * linespec.c (cplusplus_error): Replace cplusplus_hint. (decode_line_1): Use cplusplus_error instead of error_begin, cplusplus_hint and return_to_top_level. * coffread.c (coff_symfile_read): Use error instead of error_begin and return_to_top_level. * infrun.c (default_skip_permanent_breakpoint): Ditto. 2002-02-01 Andrew Cagney * language.h (type_error, range_error): Make string parameter constant. * language.c (warning_pre_print): Delete extern declaration. * dwarfread.c (warning_pre_print): Ditto. * language.c (type_error, range_error): Rewrite to use verror and vwarning instead of warning_begin. 2002-02-01 Michael Snyder * breakpoint.c (breakpoint_re_set): Delete ancient #if 0 code. (set_ignore_count): Move misplaced comment back where it belongs. 2002-02-01 Andrew Cagney * command.h (NO_FUNCTION): Delete macro. * cli/cli-decode.h (NO_FUNCTION): Ditto. * top.c (execute_command): Replace NO_FUNCTION with NULL. * tracepoint.c (_initialize_tracepoint): Ditto. * cli/cli-decode.c (add_set_cmd): Ditto. * cli/cli-cmds.c (init_cli_cmds): Ditto. 2002-02-01 Daniel Jacobowitz * gnu-v3-abi.c (gnuv3_virtual_fn_field): Update comments. Update ``this'' pointer when calling virtual functions. 2002-02-01 Michael Snyder * breakpoint.c (create_temp_exception_breakpoint): Delete. * hppa-tdep.c: Deprecate xbreak, txbreak and bx commands. 2002-02-01 Daniel Jacobowitz * regformats/reg-arm.dat: New file. * regformats/reg-i386.dat: New file. * regformats/reg-ia64.dat: New file. * regformats/reg-m68k.dat: New file. * regformats/reg-mips.dat: New file. * regformats/reg-ppc.dat: New file. * regformats/reg-sh.dat: New file. * regformats/regdef.h: New file. * regformats/regdat.sh: New file. 2002-02-01 Richard Earnshaw * arm-tdep.c (arm_frameless_function_invocation): Add some comments. (arm_frame_args_address, arm_frame_locals_address): New functions. (arm_frame_num_args): New function. * config/tm-arm.h (FRAME_ARGS_ADDRESS): Call arm_frame_args_address. (FRAME_LOCALS_ADDRESS): Call arm_frame_locals_address. (FRMA_NUM_ARGS): Call arm_frame_num_args. 2002-01-31 Michael Snyder * breakpoint.c (break_at_finish_command): Export. (break_at_finish_at_depth_command): Export. (tbreak_at_finish_command): Export. (_initialize_breakpoint): Delete "xbreak" and "tbreak" commands. * hppa-tdep.c (_initialize_hppa_tdep): Add "xbreak" and "tbreak" commands, which are HPPA specific. * printcmd.c (disassemble_command): Remove an ancient artifact of an old merge. * symfile.h (enum overlay_debugging_state): Define enum constant values for overlay mode. * symfile.c (overlay_debugging): Use enums instead of literals. (overlay_is_mapped, overlay_auto_command, overlay_manual_command): Ditto. * breakpoint.c (insert_breakpoints, remove_breakpoint, breakpoint_here_p, breakpoint_inserted_here_p, breakpoint_thread_match, bpstat_stop_status, describe_other_breakpoints, check_duplicates, clear_command): Coding standard fixes. * target.c (target_xfer_memory): Add spaces, coding standard. (do_xfer_memory): Add missing line to trust-readonly code: check bfd SEC_READONLY flag for section. 2002-01-31 Andrew Cagney * PROBLEMS: Fix typo, 5.1->5.1.1. 2002-01-30 Daniel Jacobowitz * symtab.c (find_pc_sect_psymtab): Do not search psymtabs for data symbols, since we search based on textlow and texthigh. (find_pc_sect_symtab): Likewise. 2002-01-30 Andrew Cagney * defs.h (vwarning): Declare. * utils.c (vwarning): New function. (warning): Call vwarning. (warning_begin): Delete function. * rs6000-nat.c (vmap_ldinfo): Use the function warning to print the warning message. * d10v-tdep.c (d10v_address_to_pointer) [0]: Delete call to warning_begin. 2002-01-30 Michael Snyder * NEWS: Mention "set trust-readonly-sections" command. Mention generate-core-file command. 2002-01-15 Michael Snyder * target.c: New command, "set trust-readonly-sections on". (do_xfer_memory): Honor the suggestion to trust readonly sections by reading them from the object file instead of from the target. (initialize_targets): Register command "set trust-readonly-sections". 2002-01-29 Andrew Cagney * parse.c (target_map_name_to_register): Simplify, search regs and pseudo-regs using a single loop. 2002-01-30 Andrew Cagney * PROBLEMS: Note that the i386 fix was missing from 5.1.1. 2002-01-15 Rodney Brown * config/i386/tm-i386v4.h: Define HAVE_I387_REGS. * config/i386/i386v42mp.mh: Add i387-nat.o . * i386v4-nat.c: Include i387-nat.h. (supply_fpregset): Use i387_supply_fsave. (fill_fpregset): Use i387_fill_fsave. 2002-01-30 Richard Earnshaw * arm-tdep.c (arm_call_dummy_words): Define. * arm-linux-tdep.c (arm_linux_call_dummy_words): Define. * config/arm/tm-arm.h (CALL_DUMMY_P): Define. (CALL_DUMMY_WORDS): Define. (arm_call_dummy_words): Declare. * config/arm/tm-linux.h (CALL_DUMMY_WORDS): Define. (arm_linux_call_dummy_words): Declare. 2002-01-30 Andreas Schwab * m68klinux-nat.c: Fix last change to use regcache_collect instead of referencing registers[] directly. 2002-01-29 Andrew Cagney * parse.c (target_map_name_to_register): Delete code wrapped in #ifdef REGISTER_NAME_ALIAS_HOOK. 2002-01-28 Michael Snyder * regcache.c (legacy_read_register_gen): Need to be able to read pseudo-register as well as real register. (legacy_write_register_gen): Ditto. 2002-01-28 Andrew Cagney * config/mips/tm-wince.h (TARGET_BYTE_ORDER): Delete. * config/sparc/tm-sparc.h (TARGET_BYTE_ORDER): Delete. * config/ns32k/tm-umax.h (TARGET_BYTE_ORDER): Delete. * config/ia64/tm-ia64.h (TARGET_BYTE_ORDER): Delete. * config/m32r/tm-m32r.h (TARGET_BYTE_ORDER): Delete. * config/m68k/tm-m68k.h (TARGET_BYTE_ORDER): Delete. * config/m88k/tm-m88k.h (TARGET_BYTE_ORDER): Delete. * config/mn10200/tm-mn10200.h (TARGET_BYTE_ORDER): Delete. * config/pa/tm-hppa.h (TARGET_BYTE_ORDER): Delete. * config/sh/tm-wince.h (TARGET_BYTE_ORDER): Delete. * config/v850/tm-v850.h (TARGET_BYTE_ORDER): Delete. * config/vax/tm-vax.h (TARGET_BYTE_ORDER): Delete. * config/z8k/tm-z8k.h (TARGET_BYTE_ORDER): Delete. * config/i960/tm-i960.h (TARGET_BYTE_ORDER): Delete. * config/i386/tm-i386.h (TARGET_BYTE_ORDER): Delete. * config/h8500/tm-h8500.h (TARGET_BYTE_ORDER): Delete. * config/h8300/tm-h8300.h (TARGET_BYTE_ORDER): Delete. * config/fr30/tm-fr30.h (TARGET_BYTE_ORDER): Delete. * config/d30v/tm-d30v.h (TARGET_BYTE_ORDER): Delete. * config/alpha/tm-alpha.h (TARGET_BYTE_ORDER): Delete. 2002-01-28 Andrew Cagney * arch-utils.c (TARGET_BYTE_ORDER_DEFAULT): Delete macro. (target_byte_order): Initialize to BFD_ENDIAN_BIG. (initialize_current_architecture): Update target_byte_order using information from BFD. * config/mcore/tm-mcore.h (TARGET_BYTE_ORDER_DEFAULT): * config/arm/tm-arm.h (TARGET_BYTE_ORDER_DEFAULT): Delete. 2002-01-28 Andrew Cagney * config/vax/tm-vax.h (INVALID_FLOAT): Move macro from here... * vax-tdep.c (INVALID_FLOAT): To here. Document why it is broken. * rs6000-tdep.c (rs6000_do_registers_info): Delete code wrapped in #ifdef INVALID_FLOAT. * infcmd.c (do_registers_info): Ditto. * values.c (unpack_double): Ditto. Add comment. * config/ns32k/tm-umax.h (INVALID_FLOAT): Delete macro that was already commented out. 2002-01-26 Andreas Schwab * config/m68k/nm-linux.h (FETCH_INFERIOR_REGISTERS): Define. * m68klinux-nat.c: Update ptrace interface for fetching/storing registers and add support for PTRACE_GETREGS. 2002-01-24 Andrew Cagney GDB 5.1.1 released from 5.1 branch. * NEWS: Add 5.1.1 news. * README: Sync with 5.1 branch. 2002-01-23 Fred Fish * mdebugread.c (parse_partial_symbols): Only copy stabstring1 to stabstring on initial malloc. Reallocing will copy it for us, if necessary. 2002-01-23 Elena Zannoni * Makefile.in (hpread_h): Delete. (HFILES_NO_SRCDIR): Remove hpread.h. (ALLDEPFILES): Remove hp-psymtab-read.c and hp-symtab-read.c. (hpread.o): Update dependencies. (hp-psymtab-read.o, hp-symtab-read.o): Remove. * hp-psymtab-read.c: Remove file. * hp-symtab-read.c: Remove file. * hpread.h: Remove file. * hpread.c: Merge all contents of hp-psymtab-read.c, hp-symtab-read.c and hpread.h into this file, as it was prior to January 1999. * config/pa/hpux11w.mh, config/pa/hpux11.mh, config/pa/hpux1020.mh, config/pa/hppaosf.mh, config/pa/hppahpux.mh, config/pa/hppabsd.mh (NATDEPFILES): Remove hp-psymtab-read.o and hp-symtab-read.o, add hpread.o. 2002-01-23 Elena Zannoni * ppc-linux-nat.c (ppc_register_u_addr, supply_gregset, fill_gregset): Call gdbarch_tdep() just once, assign result to variable and use that, instead of calling the function several times. 2002-01-24 Alexandre Oliva * configure.host: Accept sparcv9 as alias for sparc64. * configure.tgt: Likewise. 2002-01-22 Kevin Buettner * solib-aix5.c (build_so_list_from_mapfile) (aix5_relocate_main_executable): Fix xcalloc() calls so order of arguments is not reversed. * solib-sunos.c (sunos_relocate_main_executable): Likewise. * solib-svr4.c (svr4_relocate_main_executable): Likewise. 2002-01-22 Elena Zannoni * sh-tdep.c (sh_pseudo_register_read): New function. Renamed and modified version of obsolete sh_fetch_pseudo_register. (sh_fetch_pseudo_register): Rename to sh_pseudo_register_read. (sh4_register_read): New function. (sh_pseudo_register_write): New function. Renamed and modified version of obsolete sh_store_pseudo_register. (sh_store_pseudo_register): Rename to sh_pseudo_register_write. (sh4_register_write): New function. (sh_gdbarch_init): Remove setting of gdbarch function fetch_pseudo_register and store_pseudo_register. Remove setting of register_convert_to_raw, register_convert_to_virtual, register_convertible. (sh_sh4_register_convertible): Delete. No longer needed. All is taken care by architecture specific functions register_read/register_write. (sh_sh4_register_convert_to_virtual): Make static. (sh_sh4_register_convert_to_raw): Ditto. 2002-01-22 Andrew Cagney * doublest.c (floatformat_is_negative): Assert FMT is non NULL. (floatformat_is_nan, floatformat_mantissa): Ditto. * gdbtypes.c (_initialize_gdbtypes): Initialize TYPE_FLOATFORMAT for builtin_type_ieee_single_little, builtin_type_ieee_double_big, builtin_type_ieee_double_little, builtin_type_ieee_double_littlebyte_bigword, builtin_type_m68881_ext, builtin_type_i960_ext, builtin_type_m88110_ext, builtin_type_m88110_harris_ext, builtin_type_arm_ext_big, builtin_type_arm_ext_littlebyte_bigword, builtin_type_ia64_spill_big, builtin_type_ia64_spill_little and builtin_type_ia64_quad_big, builtin_type_ia64_quad_little. 2002-01-22 Corinna Vinschen * xstormy16-tdep.c (xstormy16_scan_prologue): Add frameless parameter. Set frameless flag if it exists and depended of whether the scanned function is frameless or not. (xstormy16_skip_prologue): If function is frameless, return result of xstormy16_scan_prologue(). (xstormy16_frame_init_saved_regs): Adjust xstormy16_scan_prologue() call. 2002-01-21 Elena Zannoni * sh-tdep.c (sh_fp_frame_init_saved_regs, sh_push_arguments, sh_generic_show_regs, sh3_show_regs, sh3e_show_regs, sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs, sh_sh4_register_byte, sh_sh4_register_raw_size, sh_sh3e_register_virtual_type, sh_sh4_register_virtual_type, sh_sh4_register_convertible, sh_sh4_register_convert_to_virtual, sh_sh4_register_convert_to_raw, sh_fetch_pseudo_register, sh_store_pseudo_register, sh_do_pseudo_register): Call gdbarch_tdep() just once, assign result to variable and use that, instead of calling the function several times. 2002-01-20 Mark Kettenis * go32-nat.c (fetch_register): Use FP_REGNUM_P and FPC_REGNUM_P macros instead of LAST_FPU_CTRL_REGNUM. (store_register): Likewise. 2002-01-21 Jim Blandy * infcmd.c (run_command): Check that the `exec' target layer's BFD is up-to-date before running the program, not just when a program exits. 2002-01-21 Fred Fish * arm-tdep.c (thumb_skip_prologue): Quit scanning prologue when we have found all instructions we are looking for. 2002-01-21 Richard Earnshaw * arm-tdep.c (arm_register_name): New function. (arm_registers_names): Make static. * config/arm/tm-arm.h (arm_register_names): Delete declaration. (arm_register_name): Declare. (REGISTER_NAME): Use it. 2002-01-21 Richard Earnshaw Kevin Buettner Convert arm targets to new FRAME interface. * arm-tdep.c (struct frame_extra_info): Remove fsr. (arm_frame_find_save_regs): Delete. (arm_frame_init_saved_regs): New. (arm_init_extra_frame_info): Alloacte saved_regs as required. Allocate extra_info as required. Convert all uses of fsr.regs to use saved_regs, similarly all uses of EXTRA_FRAME_INFO fields to use extra_info. (thumb_scan_prologue, arm_scan_prologue, arm_find_callers_reg) (arm_frame_chain, arm_frame_saved_pc, arm_pop_frame): Likewise. (check_prologue_cache, save_prologue_cache): Likewise. (_initialize_arm_tdep): Ensure prologue_cache is correctly set up. * config/arm/tm-arm.h (EXTRA_FRAME_INFO): Delete. (FRAME_FIND_SAVED_REGS): Delete. (arm_frame_find_saved_regs): Delete prototype. (arm_frame_init_saved_regs): New prototype. (FRAME_INIT_SAVED_REGS): Define. 2002-01-20 Andrew Cagney * config/arc/tm-arc.h (IEEE_FLOAT): Delete. 2002-01-20 Andrew Cagney From Jeff Law : * infttrace.c: Include . (child_pid_to_exec_file): Revamp. Use pstat call to get the exec file if the ttrace equivalent fails. 2002-01-20 Andrew Cagney * rdi-share/devsw.c (openLogFile): Delete unused ``struct tm lt''. (closeLogFile): Ditto. 2002-01-20 Michael Chastain * top.c (print_gdb_version): Bump copyright year to 2002. 2002-01-20 Andrew Cagney * MAINTAINERS (Blanket Write Privs): Add Kevin Buettner, Elena Zannoni and Eli Zaretskii. 2002-01-20 Daniel Jacobowitz * buildsym.c: Update copyright years. * c-typeprint.c: Likewise. * dwarf2read.c: Likewise. * f-typeprint.c: Likewise. * gdbtypes.c: Likewise. * gdbtypes.h: Likewise. * hp-symtab-read.c: Likewise. * hpread.c: Likewise. * mdebugread.c: Likewise. * p-typeprint.c: Likewise. 2002-01-20 Andrew Cagney * remote-sim.c (gdbsim_open): Simplify code testing the macro TARGET_BYTE_ORDER_SELECTABLE_P. Assume the target is always byte-order selectable. * sparc-tdep.c (sparc_target_architecture_hook): Ditto. * arch-utils.c: Ditto. (set_endian): Ditto. (set_endian_from_file): Ditto. * gdbserver/low-sim.c (create_inferior): Ditto. * gdbarch.sh: Ditto. * gdbarch.h: Re-generate. * config/powerpc/tm-ppc-eabi.h (TARGET_BYTE_ORDER_SELECTABLE_P): * config/sparc/tm-sparclite.h (TARGET_BYTE_ORDER_SELECTABLE): * config/sparc/tm-sparclet.h (TARGET_BYTE_ORDER_SELECTABLE): * config/mcore/tm-mcore.h (TARGET_BYTE_ORDER_SELECTABLE_P): * config/arm/tm-wince.h (TARGET_BYTE_ORDER_SELECTABLE_P): * config/arm/tm-linux.h (TARGET_BYTE_ORDER_SELECTABLE_P): * config/arc/tm-arc.h (TARGET_BYTE_ORDER_SELECTABLE): * config/arm/tm-arm.h (TARGET_BYTE_ORDER_SELECTABLE_P): Delete macro definition. * config/mips/tm-wince.h: Remove #undef of macro TARGET_BYTE_ORDER_SELECTABLE. * config/sh/tm-wince.h: Ditto. 2002-01-20 Daniel Jacobowitz * gdbtypes.h (struct cplus_struct_type): Add is_artificial to member function fields. Add accessor macro TYPE_FN_FIELD_ARTIFICIAL. * dwarf2read.c (dwarf2_add_member_fn): Check for artificial methods. * c-typeprint.c (c_type_print_base): Skip artificial member functions. 2002-01-20 Daniel Jacobowitz * f-typeprint.c: Delete unused function f_type_print_args. * p-typeprint.c: Delete unused function pascal_type_print_args. 2002-01-20 Daniel Jacobowitz * gdbtypes.h (struct type): Fix whitespace. Remove obsolete comment. Add ``artificial'' to ``union field_location''. * dwarf2read.c: Remove ad-hoc TYPE_FIELD_ARTIFICIAL. * buildsym.c (finish_block): Initialize TYPE_FIELD_ARTIFICIAL to 0. * mdebugread.c (parse_symbol): Likewise. * stabsread.c (define_symbol): Likewise. * hp-symtab-read.c (hpread_function_type): Likewise, instead of initializing TYPE_FIELD_BITPOS to n (obsolete). (hpread_doc_function_type): Likewise. * hpread.c (hpread_function_type): Likewise. 2002-01-20 Andrew Cagney * configure.in (host_makefile_frag): Only require a host makefile fragment when a native build. * configure: Re-generate. 2002-01-20 Andrew Cagney * doublest.h (floatformat_from_type): Declare. * doublest.c (floatformat_from_type): New function. (convert_typed_floating): Use. * valprint.c (print_floating): Replace checks for IEEE_FLOAT with call to function floatformat_from_type. * gdbarch.sh (IEEE_FLOAT): Delete. * gdbarch.h, gdbarch.c: Re-generate. * config/i960/tm-i960.h (IEEE_FLOAT): Delete macro. * config/i386/tm-i386.h (IEEE_FLOAT): Ditto. * config/z8k/tm-z8k.h (IEEE_FLOAT): Ditto. * config/sparc/tm-sparc.h (IEEE_FLOAT): Ditto. * config/pa/tm-hppa.h (IEEE_FLOAT): Ditto. * config/m88k/tm-m88k.h (IEEE_FLOAT): Ditto. * config/m68k/tm-m68k.h (IEEE_FLOAT): Ditto. * config/h8500/tm-h8500.h (IEEE_FLOAT): Ditto. * config/h8300/tm-h8300.h (IEEE_FLOAT): Ditto. * config/fr30/tm-fr30.h (IEEE_FLOAT): Ditto. * config/arm/tm-arm.h (IEEE_FLOAT): Ditto. * config/alpha/tm-alpha.h (IEEE_FLOAT): Ditto. * s390-tdep.c (s390_gdbarch_init): Do not set ieee_float. * x86-64-tdep.c (i386_gdbarch_init): Ditto. * sparc-tdep.c (sparc_gdbarch_init): Ditto. * sh-tdep.c (sh_gdbarch_init): Ditto. * mips-tdep.c (mips_gdbarch_init): Ditto. * m68hc11-tdep.c (m68hc11_gdbarch_init): Ditto. * cris-tdep.c (cris_gdbarch_init): Ditto. 2002-01-20 Jiri Smid * configure.host, configure.tgt: Support x86-64. * NEWS: Note new target x86-64. * config/i386/x86-64linux.mh (NATDEPFILES): x86-64-nat.o removed. * x86-64-linux-nat.c (x86_64_register_u_addr): New function. * config/i386/nm-x86-64.h (ATTACH_LWP): Removed. * Makefile.in (x86-64-tdep.o, x86-64-linux-tdep.o, x86-64-linux-nat.o): Fix dependencies. 2002-01-19 Andrew Cagney * utils.c: Remove #ifndef MALLOC_INCOMPATIBLE. * config/sparc/xm-sun4os4.h (PTRACE_ARG3_TYPE): Move macro .... * config/sparc/nm-sun4os4.h (PTRACE_ARG3_TYPE): ... to here. * config/sparc/xm-sun4os4.h: Delete file. * config/sparc/sun4os4.mh (XM_FILE): Delete makefile variable. 2002-01-19 Andrew Cagney * config/sparc/sparclynx.mh (XM_FILE): Delete. * config/rs6000/rs6000lynx.mh (XM_FILE): Delete. * config/m68k/m68klynx.mh (XM_FILE): Delete. * config/i386/i386lynx.mh (XM_FILE): Delete. * config/rs6000/xm-rs6000ly.h: Delete file. * config/sparc/xm-sparclynx.h: Delete file. * config/m68k/xm-m68klynx.h: Delete file. * config/i386/xm-i386lynx.h: Delete file. * config/xm-lynx.h: Delete file. * config/djgpp/fnchange.lst: Update. 2002-01-19 Jason Thorpe * alpha-tdep.c (alpha_register_byte): New function. (alpha_register_raw_size): Ditto. (alpha_register_virtual_size): Ditto. (alpha_skip_prologue_internal): Renamed from alpha_skip_prologue. (alpha_skip_prologue): New version that calls alpha_skip_prologue_internal. (alpha_in_lenient_prologue): Use alpha_skip_prologue_internal. * config/alpha/tm-alpha.h (SKIP_PROLOGUE): Remove second argument from alpha_skip_prologue. (REGISTER_BYTE): Use alpha_register_byte. (REGISTER_RAW_SIZE): Use alpha_register_raw_size. (REGISTER_VIRTUAL_SIZE): Use alpha_register_virtual_size. (FRAMELESS_FUNCTION_INVOCATION): Use generic_frameless_function_invocation_not. (FRAME_NUM_ARGS): Use frame_num_args_unknown. (COERCE_FLOAT_TO_DOUBLE): Use standard_coerce_float_to_double. 2002-01-19 Andrew Cagney * config/mips/xm-news-mips.h: Delete file. * config/mips/news-mips.mh (XM_FILE): Delete makefile variable. * config/m88k/xm-m88k.h: Delete file. * config/m88k/xm-dgux.h: Do not include xm-m88k.h. * config/m88k/xm-delta88v4.h: Ditto. * config/m88k/xm-delta88.h: Ditto. * config/alpha/xm-fbsd.h: Delete file. * config/alpha/fbsd.mh (XM_FILE): Delete makefile variable. * config/sparc/xm-sparc.h: Delete file. * Makefile.in (xm-sun4os4.h): Delete dependency. * config/sparc/xm-sun4sol2.h: Do not include xm-sparc.h. * config/sparc/xm-sun4os4.h: Ditto. * config/sparc/xm-linux.h: Ditto. * config/i386/xm-windows.h: Delete file. 2002-01-19 Andrew Cagney * utils.c: Include for MAXPATHLEN. (gdb_realpath): Use MAXPATHLEN when PATH_MAX is not defined. 2002-01-19 Jason Thorpe * alpha-tdep.c (alpha_call_dummy_words): New. * config/alpha/tm-alpha.h (CALL_DUMMY): Remove. (CALL_DUMMY_P): Define. (CALL_DUMMY_WORDS): Define. (SIZEOF_CALL_DUMMY_WORDS): Define. 2002-01-19 Per Bothner * gnu-v3-abi.c (gnuv3_rtti_type): Guard that vtable_symbol_name isn't NULL, which can happen with some gcj-3.x-produced code. 2002-01-19 Jason Thorpe * alpha-tdep.c (alpha_register_virtual_type): New function. (alpha_init_frame_pc_first): Ditto. (alpha_fix_call_dummy): Ditto. (alpha_store_struct_return): Ditto. (alpha_extract_struct_value_address): Ditto. * config/alpha/tm-alpha.h (REGISTER_VIRTUAL_TYPE): Use alpha_register_virtual_type. (STORE_STRUCT_RETURN): Use alpha_store_struct_return. (EXTRACT_STRUCT_VALUE_ADDRESS): Use alpha_extract_struct_value_address. (FIX_CALL_DUMMY): Use alpha_fix_call_dummy. (INIT_FRAME_PC): Use init_frame_pc_noop. (INIT_FRAME_PC_FIRST): Use alpha_init_frame_pc_first. 2002-01-19 Mark Kettenis * i386gnu-nat.c: Include "i386-tdep.h". (fetch_fpregs): Simplify code dealing with uninitialized floating point states such that it doesn't require FP7_REGNUM. 2002-01-18 Jason Thorpe * alpha-tdep.c (frame_extra_info): New. (alpha_find_saved_regs): Make static. Use frame->extra_info. (alpha_frame_init_saved_regs): New function. (alpha_frame_saved_pc): Use frame->extra_info. (temp_saved_regs): Don't declare as struct frame_saved_regs. (heuristic_proc_desc): Adjust for temp_saved_regs changes. (init_extra_frame_info): Rename to... (alpha_init_extra_frame_info): ...this. Use frame->extra_info. (alpha_print_extra_frame_info): New function. (alpha_frame_locals_address): Ditto. (alpha_frame_args_address): Ditto. (alpha_pop_frame): Use frame->extra_info. * config/alpha/tm-alpha.h (FRAME_ARGS_ADDRESS): Use alpha_frame_args_address. (FRAME_LOCALS_ADDRESS): Use alpha_frame_locals_address. (alpha_find_saved_regs): Remove prototype. (FRAME_INIT_SAVED_REGS): Use alpha_frame_init_saved_regs. (EXTRA_FRAME_INFO): Remove. (INIT_EXTRA_FRAME_INFO): Use alpha_init_extra_frame_info. (PRINT_EXTRA_FRAME_INFO): Use alpha_print_extra_frame_info. 2002-01-18 Jason Thorpe * alpha-tdep.c (alpha_osf_in_sigtramp): New function. (alpha_cannot_fetch_register): Ditto. (alpha_cannot_store_register): Ditto. (alpha_register_convertible): Ditto. (alpha_use_struct_convention): Ditto. * config/alpha/tm-alpha.h: Update copyright years. (IN_SIGTRAMP): Use alpha_osf_in_sigtramp. (INNER_THAN): Use core_addr_lessthan. (CANNOT_FETCH_REGISTER): Use alpha_cannot_fetch_register. (CANNOT_STORE_REGISTER): Use alpha_cannot_store_register. (REGISTER_CONVERTIBLE): Use alpha_register_convertible. (USE_STRUCT_CONVENTION): Use alpha_use_struct_convention. (FRAME_CHAIN): Remove unnecessary cast. 2002-01-18 Andrew Cagney * NEWS: Document that testsuite/gdb.hp/gdb.threads-hp/ is obsolete. 2002-01-18 Andrew Cagney * infptrace.c: Remove ATTRIBUTE_UNUSED. Update copyright. * monitor.c, remote-array.c, remote-bug.c: Ditto. * remote-e7000.c, remote-es.c, remote-mips.c: Ditto. * remote-nindy.c, remote-os9k.c, remote-rdi.c: Ditto. * remote-rdp.c, remote-sds.c, remote-sim.c: Ditto. * remote-st.c, remote-vx.c, remote.c, win32-nat.c: Ditto. * x86-64-linux-nat.c: Ditto. 2002-01-18 Jason Thorpe * alpha-tdep.c (alpha_register_name): New function. * config/alpha/tm-alpha.h (REGISTER_NAMES): Remove. (REGISTER_NAME): Define. 2002-01-18 Jason Thorpe * config/nm-nbsd.h (KERNEL_U_ADDR): Remove. 2002-01-18 Jason Thorpe * alpha-tdep.c: Update copyright years. (alpha_next_pc): New function. (alpha_software_single_step): Ditto. * config/alpha/tm-alpha.h: Add prototype for alpha_software_single_step. 2002-01-18 Jason Thorpe * alphabsd-nat.c: Update copyright years. (fill_gregset): Use regcache_collect. (fill_fpregset): Likewise. (fetch_inferior_registers): Only fetch integer registers if requested to do so. (store_inferior_registers): Only store integer registers if requested to do so. 2002-01-17 Andrew Cagney * config/alpha/alpha-osf3.mh (XDEPFILES): Delete. * config/alpha/alpha-osf2.mh (XDEPFILES): Delete. * config/alpha/alpha-osf1.mh (XDEPFILES): Delete. * config/alpha/alpha-linux.mh (XDEPFILES): Delete. * config/alpha/fbsd.mh (XDEPFILES): Delete. * config/arm/linux.mh (XDEPFILES): Delete. * config/arm/nbsd.mh (XDEPFILES): Delete. * config/i386/i386dgux.mh (XDEPFILES): Delete. * config/i386/i386sol2.mh (XDEPFILES): Delete. * config/i386/i386m3.mh (XDEPFILES): Delete. (NATDEPFILES): Move i387-tdep.o and core-aout.o to here. * config/i386/i386gnu.mh (XDEPFILES): Delete. * config/i386/fbsd.mh (XDEPFILES): Delete. * config/i386/i386bsd.mh (XDEPFILES): Delete. * config/i386/i386sco5.mh (XDEPFILES): Delete. * config/i386/i386v4.mh (XDEPFILES): Delete. * config/i386/i386v42mp.mh (XDEPFILES): Delete. * config/i386/i386sco4.mh (XDEPFILES): Delete. * config/i386/i386aix.mh (XDEPFILES): Delete. * config/i386/go32.mh (XDEPFILES): Delete. * config/i386/cygwin.mh (XDEPFILES): Delete. * config/i386/i386lynx.mh (XDEPFILES): Delete. * config/i386/i386mach.mh (XDEPFILES): Delete. * config/i386/i386v32.mh (XDEPFILES): Delete. * config/i386/linux.mh (XDEPFILES): Delete. * config/i386/nbsdelf.mh (XDEPFILES): Delete. * config/i386/ncr3000.mh (XDEPFILES): Delete. * config/i386/i386mk.mh (NATDEPFILES): Rename XDEPFILES. * config/i386/i386sco.mh (XDEPFILES): Delete. * config/i386/i386v.mh (XDEPFILES): Delete. * config/i386/nbsd.mh (XDEPFILES): Delete. * config/i386/ptx.mh (NATDEPFILES): Rename XDEPFILES. * config/i386/ptx4.mh (NATDEPFILES): Rename XDEPFILES. * config/i386/symmetry.mh (XDEPFILES): Delete. * config/i386/obsd.mh (XDEPFILES): Delete. * config/i386/x86-64linux.mh (XDEPFILES): Delete. * config/ia64/linux.mh (XDEPFILES): Delete. * config/ia64/aix.mh (XDEPFILES): Delete. * config/m68k/apollo68b.mh (XDEPFILES): Delete. * config/m68k/dpx2.mh (XDEPFILES): Delete. * config/m68k/3b1.mh (NATDEPFILES): Rename XDEPFILES. * config/m68k/apollo68v.mh (XDEPFILES): Delete. * config/m68k/hp300bsd.mh (XDEPFILES): Delete. * config/m68k/linux.mh (XDEPFILES): Delete. * config/m68k/m68klynx.mh (XDEPFILES): Delete. * config/m68k/m68kv4.mh (XDEPFILES): Delete. * config/m68k/nbsd.mh (XDEPFILES): Delete. * config/m68k/sun2os3.mh (XDEPFILES): Delete. * config/m68k/sun2os4.mh (XDEPFILES): Delete. * config/m68k/sun3os3.mh (XDEPFILES): Delete. * config/m68k/sun3os4.mh (XDEPFILES): Delete. * config/m88k/delta88.mh (XDEPFILES): Delete. * config/m88k/delta88v4.mh (XDEPFILES): Delete. * config/m88k/m88k.mh (XDEPFILES): Delete. * config/mips/littlemips.mh (NATDEPFILES): Rename XDEPFILES. * config/mips/linux.mh (XDEPFILES): Delete. * config/mips/irix6.mh (XDEPFILES): Delete. * config/mips/irix5.mh (XDEPFILES): Delete. * config/mips/irix4.mh (XDEPFILES): Delete. * config/mips/irix3.mh (XDEPFILES): Delete. * config/mips/decstation.mh (XDEPFILES): Delete. * config/mips/mipsm3.mh (XDEPFILES): Delete. (NATDEPFILES): Move core-aout.o to here. * config/ns32k/nbsd.mh (XDEPFILES): Delete. * config/pa/hpux1020.mh (XDEPFILES): Delete. * config/pa/hppabsd.mh (XDEPFILES): Delete. * config/pa/hppahpux.mh (XDEPFILES): Delete. * config/pa/hpux11w.mh (XDEPFILES): Delete. * config/pa/hppaosf.mh (XDEPFILES): Delete. * config/pa/hpux11.mh (XDEPFILES): Delete. * config/powerpc/aix.mh (XDEPFILES): Delete. * config/powerpc/nbsd.mh (XDEPFILES): Delete. * config/powerpc/linux.mh (XDEPFILES): Delete. * config/romp/rtbsd.mh: Rename XDEPFILES. * config/rs6000/rs6000lynx.mh (XDEPFILES): Delete. * config/rs6000/aix4.mh (XDEPFILES): Delete. * config/rs6000/rs6000.mh (XDEPFILES): Delete. * config/s390/s390.mh (XDEPFILES): Delete. * config/vax/vaxbsd.mh (NATDEPFILES): Rename XDEPFILES. * config/sparc/sun4sol2.mh (XDEPFILES): Delete. * config/sparc/sun4os4.mh (XDEPFILES): Delete. * config/sparc/sparclynx.mh (XDEPFILES): Delete. * config/sparc/nbsdelf.mh (XDEPFILES): Delete. * config/sparc/nbsd.mh (XDEPFILES): Delete. * config/sparc/linux.mh (XDEPFILES): Delete. * config/vax/vaxult.mh (XDEPFILES): Delete. * config/vax/vaxult2.mh (XDEPFILES): Delete. * Makefile.in (DEPFILES): Remove XDEPFILES. 2002-01-17 Andrew Cagney * utils.c (internal_verror): Fix comments, default is yes not no. Update queries to match. Default to quit and dump core. 2002-01-17 Andrew Cagney * breakpoint.c: Update assuming #if UI_OUT is always true. Update copyright. * defs.h, event-top.c, gdbcmd.h: Ditto. * infcmd.c, infrun.c, main.c, printcmd.c, remote.c: Ditto. * source.c, stack.c, symfile.c, symtab.c, thread.c: Ditto. * top.c, cli/cli-cmds.c, cli/cli-decode.c: Ditto. * cli/cli-script.c, cli/cli-script.h, cli/cli-setshow.c: Ditto. * mi/ChangeLog, mi/mi-cmd-break.c, mi/mi-cmd-stack.c: Ditto. * mi/mi-main.c:Ditto. * stack.c, symfile.c: Update copyright. 2002-01-17 Daniel Jacobowitz * gdbserver/low-hppabsd.c, gdbserver/low-lynx.c, gdbserver/low-nbsd.c, gdbserver/low-sim.c, gdbserver/low-sparc.c, gdbserver/low-sun3.c, gdbserver/low-linux.c, gdbserver/server.c: Correct copyright notices. 2002-01-17 Daniel Jacobowitz * gdbserver/low-hppabsd.c (myattach): New function, returning -1. * gdbserver/low-lynx.c (myattach): Likewise. * gdbserver/low-nbsd.c (myattach): Likewise. * gdbserver/low-sim.c (myattach): Likewise. * gdbserver/low-sparc.c (myattach): Likewise. * gdbserver/low-sun3.c (myattach): Likewise. * gdbserver/low-linux.c (myattach): New function. * gdbserver/server.c (attach_inferior): New function. (main): Handle "--attach". 2002-01-16 Andrew Cagney * MAINTAINERS (language support): Daniel Jacobwitz is C++ maintainer. 2002-01-15 Daniel Jacobowitz * c-typeprint.c (is_type_conversion_operator): Add additional check for non-conversion operators. 2002-01-15 Michael Snyder * linux-proc.c: Add "info proc" command, a la procfs.c. (read_mapping): New function, abstract and re-use code. (linux_find_memory_regions): Use new func read_mapping. (linux_info_proc_cmd): New function, implement "info proc". (_initialize_linux_proc): Add new command "info proc". 2002-01-15 Michael Snyder * symfile.c (generic_load): Use bfd_map_over_sections method instead of manipulating bfd structure members directly. (add_section_size_callback): New function, bfd sections callback used by generic_load. (load_sections_callback): New function, bfd sections callback used by generic_load. 2002-01-15 Elena Zannoni [Based on work by Jim Blandy] * gdbtypes.h (builtin_type_v16qi, builtin_type_v8hi): Export. (builtin_type_vec128): Export. * gdbtypes.c (builtin_type_v16qi, builtin_type_v8hi): New SIMD types. (builtin_type_vec128): New builtin type for 128 bit vector registers. (build_gdbtypes): Initialize builtin_type_v16qi and builtin_type_v8hi. Create the vec128 register builtin type structure. (build_builtin_type_vec128): New function. (_initialize_gdbtypes): Register builtin_type_v16qi and builtin_type_v8hi with gdbarch. Same for builtin_type_vec128. * rs6000-tdep.c (rs6000_register_virtual_type): Change type of AltiVec register to new builtin type. 2001-01-15 Daniel Jacobowitz * stabsread.c (read_type): Pass dbx_lookup_type (typenums) to make_cv_type. 2002-01-14 Andrew Cagney * config/pa/tm-hppa.h (DEPRECATED_CLEAN_UP_REGISTER_VALUE): Rename CLEAN_UP_REGISTER_VALUE. * regcache.c (supply_register): Update only call. 2002-01-14 Andrew Cagney * configure.tgt: Mark a29k-*-aout*, a29k-*-coff*, a29k-*-elf*, a29k-*-ebmon*, a29k-*-kern*, a29k-*-none*, a29k-*-udi* and a29k-*-vxworks* targets as obsolete. 2002-01-14 Michael Snyder * linux-proc.c (linux_do_thread_registers): Ignore fpxregs until we can resolve portability issues. * gregset.h: Remove references to fpxregs. * gcore.c (gcore_command): Initialize note_sec to NULL. 2002-01-13 Andrew Cagney * signals.c (target_signal_to_name): Rewrite. Only use signals[].name when in bounds and non-NULL. 2002-01-13 Andrew Cagney From Petr Ledvina : * signals.c (target_signal_to_name): Verify that SIG is within the bounds of the signals array. 2002-01-13 Andrew Cagney * MAINTAINERS: Remove arm-coff and arm-pe from target list. 2002-01-13 Keith Seitz * stack.c (print_frame_info_base): Print the frame's pc only if when print_frame_info_listing_hook is not defined. 2002-01-13 Keith Seitz * varobj.c (varobj_set_value): Make sure that there were no errors evaluating the object before attempting to set its value. value_cast now properly adjusts VALUE_ADDRESS for baseclasses, so this offset adjustment is no longer necessary. (create_child): Don't set the error flag if the child is a CPLUS_FAKE_CHILD. (value_of_child): If value_fetch_lazy fails, return NULL so that callers will be notified that an error occurred. (c_value_of_variable): Delay check of variable's validity until later. We actually want all structs and unions to have the value "{...}". Do not return "???" for variables which could not be evaluated. This error condition must be returned to the caller so that it can get the error condition from gdb. (cplus_name_of_child): Adjust index for vptr before figuring out the name of the child. (cplus_value_of_child): If a child's (real) parent is not valid, don't even bother trying to give a value for it. Just return an error. Change all instances in this function. (cplus_type_of_child): If our parent is one of the "fake" parents, we need to get at the type of the real parent, and derive the child's true type using this information. 2002-01-13 Andrew Cagney From 2002-01-09 John Marshall : * CONTRIBUTE, README, TODO: Change sourceware.cygnus.com to sources.redhat.com, and tweak some related URLs which had suffered from linkrot. 2002-01-13 Andrew Cagney From Jeff law: * hppa-tdep.c (hppa_push_arguments): Correct handling of 5-7 byte structures passed in registers. 2002-01-13 Eli Zaretskii * go32-nat.c (save_npx) [__DJGPP_MINOR__ < 3]: Remove extraneous white space which prevented compilation. Reported by DSK . 2002-01-11 Michael Snyder * symfile.c (build_section_addr_info_from_section_tab): Use bfd access method instead of manipulating bfd directly. (syms_from_objfile): Ditto. (simple_overlay_update_1): Ditto. (simple_overlay_update): Ditto. (generic_load): Ditto. (overlay_unmapped_address): FIXME comment, bfd access methods. (sections_overlap): FIXME comment, bfd access methods. (pc_in_mapped_range): FIXME comment, bfd access methods. (pc_in_unmapped_range): FIXME comment, bfd access methods. (section_is_mapped): FIXME comment, bfd access methods. (section_is_overlay): FIXME comment, bfd access methods. * symfile.c (generic_load): Whitespace and long line cleanups. Remove duplicate variable, change several local variables to more appropriate data types. (print_transfer_performance): Use %lu instead of %ld for ulongs. 2002-01-12 Andrew Cagney From Peter Schauer: * language.c (longest_local_hex_string_custom): Use phex_nz to convert NUM to a hex string. 2002-01-12 Elena Zannoni * sh-tdep.c (sh_gdbarch_init): Move setting of long_bit earlier in the function. Update Copyright year. 2002-01-12 Andrew Cagney * language.c (longest_raw_hex_string): Delete unused function. 2002-01-11 Petr Sorfa * MAINTAINERS (write-after-approval): Add myself. * dwarf2read.c (read_tag_string_type): Handling of DW_AT_byte_size. (read_tag_string_type): FORTRAN fix to prevent propagation of first string size. (set_cu_language): Handling of DW_LANG_Fortran95 2002-01-11 Richard Earnshaw * armnbsd-nat.c (fetch_inferior_registers): Change inferior_pid -> GETPID(inferior_ptid). (store_inferior_registers): Likewise. 2002-01-10 Jason Merrill * dwarf2read.c (decode_locdesc): Implement DW_OP_litn, DW_OP_dup. Fix DW_OP_minus. 2002-01-10 Andrew Cagney * config/djgpp/fnchange.lst: Add renames for bfd/ChangeLog-0001 and bfd/elf32-sh-nbsd.c. 2002-01-10 Michael Snyder * NEWS: Mention --pid and corefile/proc-id behavior change. * Makefile.in: Add rules for gcore.o and linux-proc.o. * gcore.c: Include cli/cli-decode.h instead of command.h. * main.c (captured_main): Add new command line option "--pid". If the second command line argument (following the symbol-file) begins with a digit, try to attach to it before trying to open it as a corefile. (print_gdb_help): Document the "--pid" argument. 2002-01-10 Eli Zaretskii * completer.c (command_completer): New function. * completer.h : Add prototype. * cli/cli-cmds.c (init_cli_cmds): Make command_completer be the completer for the "help" command. 2002-01-09 Jason Merrill * c-typeprint.c (is_type_conversion_operator): Fix thinko. 2002-01-09 Michael Snyder * i386-linux-nat.c (fill_fpxregset): Make global. (store_fpxregset): Ditto. * gregset.h (gdb_fpxregset_t): Define. (supply_fpxregset): Prototype. (fill_fpxregset): Prototype. * exec.c (exec_make_note_section): Don't call elfcore_write_prpsinfo. 2002-01-09 Richard Earnshaw * config/arm/arm-tdep.h (arm_software_single_step): Remove PARAMS. * config/arm/nm-nbsd.h (arm_register_u_addr): Likewise. * config/arm/tm-nbsd.h (get_longjmp_target): Likewise. 2002-01-09 Andrew Cagney * MAINTAINERS: Update target maintainer rules so that any Maintainer can approve a tested patch for a maintenance-only target. 2002-01-09 Richard Earnshaw * MAINTAINERS (write-after-approval): Add myself. * arm-tdep.c (arm_init_extra_frame_info): Cast NULL argument to IN_SIGTRAMP. 2002-01-08 Michael Snyder * linux-proc.c (child_pid_to_exec_file): Use readlink to get the real name of the executable, rather than the /proc name. 2002-01-03 Michael Snyder Implement a "generate-core-file" command in gdb, save target state. * gcore.c: New file. Implement new command 'generate-core-file'. Save a corefile image of the current state of the inferior. * linux-proc.c: Add linux-specific code for saving corefiles. * target.h (struct target_ops): Add new target vectors for saving corefiles; to_find_memory_regions and to_make_corefile_notes. (target_find_memory_regions): New macro. (target_make_corefile_notes): New macro. * target.c (update_current_target): Inherit new target methods. (dummy_find_memory_regions): New place-holder method. (dummy_make_corefile_notes): New place-holder method. (init_dummy_target): Initialize new dummy target vectors. * exec.c (exec_set_find_memory_regions): New function. Allow the exec_ops vector for memory regions to be taken over. (exec_make_note_section): New function, target vector method. * defs.h (exec_set_find_memory_regions): Export prototype. * procfs.c (proc_find_memory_regions): New function, corefile method. (procfs_make_note_section): New function, corefile method. (init_procfs_ops): Set new target vector pointers. (find_memory_regions_callback): New function. (procfs_do_thread_registers): New function. (procfs_corefile_thread_callback): New function. * sol-thread.c (sol_find_memory_regions): New function. (sol_make_note_section): New function. (init_sol_thread_ops): Initialize new target vectors. * inftarg.c (inftarg_set_find_memory_regions): New function. Allow to_find_memory_regions vector to be taken over. (inftarg_set_make_corefile_notes): New function. Allow to_make_corefile_notes vector to be taken over. * thread-db.c (thread_db_new_objfile): Don't activate thread-db interface layer if not target_has_execution (may be a corefile). * config/i386/linux.mh: Add gcore.o to NATDEPFILES. * config/sparc/sun4sol2.mh: Ditto. * config/alpha/alpha-linux.mh: Ditto. * config/arm/linux.mh: Ditto. * config/i386/x86-64linux.mh: Ditto. * config/ia64/linux.mh: Ditto. * config/m68k/linux.mh: Ditto. * config/mips/linux.mh: Ditto. * config/powerpc/linux.mh: Ditto. * config/sparc/linux.mh: Ditto. 2002-01-07 Michael Snyder * arm-linux-nat.c: Remove references to regcache.c internal data (registers[] and register_valid[]). 2002-01-07 Michael Snyder * linux-proc.c: New file. Implement child_pid_to_exec_file, so that attaching to a pid will automatically read the process's symbol file and shlibs. * Makefile.in: Add rule for linux-proc.o. * config/nm-linux.h: Define CHILD_PID_TO_EXEC_FILE. * config/alpha/alpha-linux.mh: Add linux-proc.o to NATDEPFILES. * config/arm/linux.mh: Ditto. * config/i386/linux.mh: Ditto. * config/i386/x86-64linux.mh: Ditto. * config/ia64/linux.mh: Ditto. * config/m68k/linux.mh: Ditto. * config/mips/linux.mh: Ditto. * config/powerpc/linux.mh: Ditto. * config/sparc/linux.mh: Ditto. 2002-01-06 Pierre Muller * win32-nat.c: Add i386-tdep.h dependency. 2002-01-07 Michael Snyder * solib.c (info_sharedlibrary_command): Use TARGET_PTR_BIT instead of bfd_get_arch_size. Don't bail out just because there's no exec_bfd. * cp-valprint.c (cp_print_value): FIXME comment, alloca size. * p-valprint.c (pascal_object_print_value): Ditto. * somread.c (som_symtab_read): Ditto. * symfile.c (simple_free_overlay_region_table): Ditto. * valops.c (value_assign): Ditto. * tracepoint.c (tracepoint_save_command): From Klee Dienes -- use tilde_expand and strerror for opening save-tracepoints file. * thread-db.c (thread_db_new_objfile): Indendation fix. * infptrace.c (GDB_MAX_ALLOCA): New define. (child_xfer_memory): Use xmalloc/xfree instead of alloca if the size of the buffer exceeds GDB_MAX_ALLOCA (default 1 megabyte, can be overridden with whatever value is appropriate to the host). * infttrace.c (child_xfer_memory): Add FIXME warning about use of alloca to allocate potentially large buffer. * rs6000-nat.c (child_xfer_memory): Ditto. * symm-nat.c (child_xfer_memory): Ditto. * x86-64-linux-nat.c (child_xfer_memory): Ditto. 2002-01-07 Jackie Smith Cashion From Nick Clifton * d10v-tdep.c: Set STACK_START to 0x200bffe. 2002-01-07 Michael Snyder * solib-legacy.c (legacy_svr4_fetch_link_map_offsets): Don't use exec_bfd if it's NULL. 2002-01-06 Mark Kettenis * valops.c (value_arg_coerce): Fix formatting. 2002-01-06 Andrew Cagney * hp-psymtab-read.c: Include "gdb_string.h" instead of . * gnu-nat.c: Ditto. 2002-01-06 Andrew Cagney * MAINTAINERS: Note that alpha-dec-osf4.0a, arc-elf, arm-coff, arm-elf, arm-pe, d30v-elf, fr30-elf, h8300hms, h8500hms, i960-coff, m32r-elf, m68k-elf, m88k, mcore-elf, mn10200-elf, ns32k-netbsd, hppa1.1-hp-proelf, v850-elf, vax-dec-vms5.5 and z8k-coff have not been multi-arched. Update z8k-coff build status. 2002-01-06 Andrew Cagney * MAINTAINERS: Mark a29k target as obsolete. * Makefile.in (a29k-tdep.o, remote-adapt.o, remote-eb.o) (remote-mm.o, remote-udi.o): Obsolete. Remove references in comments. * NEWS: Note that a29k targets are obsolete. * a29k-tdep.c: Mark as obsolete. * configure.tgt: Mark a29k-*-aout*, a29k-*-coff*, a29k-*-elf*, a29k-*-ebmon*, a29k-*-kern*, a29k-*-none*, a29k-*-udi* and a29k-*-vxworks* targets as obsolete. * remote-adapt.c: Obsolete. * remote-eb.c: Obsolete. * remote-mm.c: Obsolete. * remote-udi.c: Obsolete. * config/a29k/a29k-udi.mt: Obsolete. * config/a29k/a29k.mt: Obsolete. * config/a29k/tm-a29k.h: Obsolete. * config/a29k/tm-vx29k.h: Obsolete. * config/a29k/vx29k.mt: Obsolete. 2002-01-05 Andrew Cagney * rs6000-tdep.c (rs6000_do_registers_info): Replace BIG_ENDIAN with BFD_ENDIAN_BIG. 2002-01-05 Andrew Cagney * configure.in (AC_CHECK_HEADERS): Do not check for . * configure, config.in: Re-generate. * config/vax/xm-vaxbsd.h: Do not include . * defs.h: Do not include . 2002-01-05 Jason Thorpe * acconfig.h (HAVE_PT_GETXMMREGS): New. * config.in: Regenerate. * configure.in: Update copyright years. Add test for PT_GETXMMREGS supplied by . * configure: Regenerate. * i386bsd-nat.c: Update copyright years. (fill_gregset): Use regcache_collect. (fetch_inferior_registers): Only fetch integer registers if requested to do so. Add support for XMM registers using PT_GETXMMREGS. (store_inferior_registers): Only store integer registers if requested to do so. Add support for XMM registers using PT_SETXMMREGS. * i386nbsd-nat.c (fetch_inferior_registers): Remove. (store_inferior_registers): Remove. (fetch_core_registers): Use supply_gregset and i387_supply_fsave. (fetch_elfcore_registers): New function. (i386nbsd_elfcore_fns): New. (_initialize_i386nbsd_nat): Register i386nbsd_elfcore_fns. * config/i386/nbsd.mh (NATDEPFILES): Add i387-nat.o and i386bsd-nat.o. * config/i386/nbsdelf.mh (NATDEPFILES): Likewise. * config/i386/nbsd.mt (TDEPFILES): Add i386bsd-nat.o. * config/i386/nbsdelf.mt (TDEPFILES): Likewise. * config/i386/tm-nbsd.h: Update copyright years. (HAVE_SSE_REGS): Define. (IN_SIGTRAMP): Define as i386bsd_in_sigtramp. (SIGTRAMP_START): Redefine as i386bsd_sigtramp_start. (SIGTRAMP_END): Redefine as i386bsd_sigtramp_end. (SIGCONTEXT_PC_OFFSET): Remove. (FRAME_SAVED_PC): Define as i386bsd_frame_saved_pc. 2002-01-05 Andrew Cagney * configure.tgt: Remove powerpc-*-macos* target. * config/m68k/xm-mpw.h: Delete file. * config/xm-mpw.h: Delete file. * ser-mac.c: Delete file. * mpw-make.sed: Delete file. * mpw-config.in: Delete file. * mac-xdep.c: Delete file. * mac-gdb.r: Delete file. * mac-defs.h: Delete file. * mac-nat.c: Delete file. * config/powerpc/macos.mh: Delete file. * config/powerpc/macos.mt: Delete file. * config/powerpc/nm-macos.h: Delete file. * config/powerpc/tm-macos.h: Delete file. * source.c (openp, open_source_file): Remove obsolete code. * top.c (gdb_readline): Ditto. * utils.c (query): Ditto. * event-top.c (display_gdb_prompt): Ditto. * Makefile.in (ser-mac.o): Delete obsolete target. * NEWS: Update. 2002-01-04 Andrew Cagney * defs.h (BIG_ENDIAN): Delete macro definition. * a29k-tdep.c, arch-utils.c, arm-tdep.c, ax-gdb.c, ch-exp.c, coffread.c, cris-tdep.c, d10v-tdep.c, d30v-tdep.c, defs.h, findvar.c, infcmd.c, mem-break.c, mips-tdep.c, mn10300-tdep.c, printcmd.c, remote-os9k.c, remote-rdi.c, remote-rdp.c, remote-sim.c, remote.c, rs6000-tdep.c, sh-tdep.c, sparcl-tdep.c, stabsread.c, valops.c, valprint.c, config/a29k/tm-a29k.h, config/a29k/tm-vx29k.h, config/arm/tm-arm.h, config/d30v/tm-d30v.h, config/fr30/tm-fr30.h, config/h8300/tm-h8300.h, config/h8500/tm-h8500.h, config/m32r/tm-m32r.h, config/m68k/tm-m68k.h, config/m88k/tm-m88k.h, config/mips/tm-mips.h, config/pa/tm-hppa.h, config/sparc/tm-sparc.h, config/z8k/tm-z8k.h, mi/mi-cmd-disas.c, mi/mi-main.c: Replace BIG_ENDIAN with BFD_ENDIAN_BIG. * gdbarch.sh: Replace BIG_ENDIAN with BFD_ENDIAN_BIG. * gdbarch.c: Re-generate. 2002-01-04 Daniel Jacobowitz * thread-db.c (thread_db_new_objfile): Do not enable thread_db for core files. 2002-01-04 Jason Thorpe * config/arm/nbsd.mh (XDEPFILES): Remove ser-tcp.o. 2002-01-04 Andrew Cagney * value.h (value_ptr): Delete typedef. 2002-01-04 Jason Thorpe * i386nbsd-nat.c: Update copyright years. Include i386-tdep.h. 2002-01-04 Elena Zannoni * stabsread.c: Update copyright years. From Debashis Mahata : (read_struct_fields): Deal with Sun C compiler erroneous stab output for structs and unions. Fix PR gdb/269. 2002-01-04 Daniel Jacobowitz * p-valprint.c: Include "cp-abi.h" for baseclass_offset prototype. 2002-01-04 Daniel Jacobowitz * cp-abi.c: Fix whitespace. (baseclass_offset): New wrapper function. * cp-abi.h (baseclass_offset): Add prototype. (struct cp_abi_ops): Add baseclass_offset pointer. * valops.c (vb_match): Move to... * gnu-v2-abi.c (vb_match): here. * valops.c (baseclass_offset): Move to... * gnu-v2-abi.c (gnuv2_baseclass_offset): here, and rename. * gnu-v3-abi.c (gnuv3_baseclass_offset): New function. * gnu-v2-abi.c (init_gnuv2_ops): Initialize baseclass_offset. * gnu-v3-abi.c (init_gnuv3_ops): Likewise. * hpacc-abi.c (init_hpacc_ops): Likewise. 2002-01-04 Daniel Jacobowitz * valops.c (find_overload_match): Accept obj as a reference parameter. Update it before returning. * value.h (find_overload_match): Update prototype. * eval.c (evaluate_subexp_standard): Pass object to find_overload_match by reference. 2002-01-03 Andrew Cagney * valarith.c: Replace value_ptr with struct value pointer. Remove register attribute from value declarations. * valops.c: Ditto. * value.h: Ditto. * scm-lang.c (scm_lookup_name): Ditto. 2002-01-03 Michael Snyder Abstract the functionality of iterating over mapped memory regions into a general purpose iterator function. * procfs.c (iterate_over_mappings): New function, general purpose iterator for memory sections. (proc_iterate_over_mappings): Reimplement using iterate_over_mappings. (solib_mappings_callback): New function, callback for above. (info_proc_mappings): Reimpliment using iterate_over_mappings. (info_mappings_callback): New function, callback for above. * procfs.c (proc_set_watchpoint): Add cast to suppress warning. 2002-01-01 Mark Kettenis * i386-tdep.h (struct gdbarch_tdep): Add `os_ident' member. * i386-tdep.c: Include "elf-bfd.h". (process_note_abi_tag_sections): New function. (i386_gdbarch_init): Add code to recognize various OS/ABI combinations. * maint.c (_initialize_maint_cmds): Add missing \ in string-literal. For older changes see ChangeLog-2001 Local Variables: mode: change-log left-margin: 8 fill-column: 74 version-control: never End: