Freeradius, OpenLDAP, Freebsd documentation Dusty Doris dusty at doris dot cc 01-09-2003 This document describes how to setup Freeradius on a Freebsd machine using LDAP as a backend. This is by no means complete and your mileage may vary. If you are having any problems with the setup of your freeradius installation, please read the documentation that comes with Freeradius first as that is where all the information for this project came from. If you find any bugs, typos, alternative ideas, or just plain wrong information, please let me know by sending an email to the address above. The radius servers in this document are built on Freebsd 4.8, using Freeradius .81 with OpenLDAP 2.0.27 as the backend. The servers are designed to support customers for multiple services. In this document we will use regular dialup and dialup ISDN as examples of two different services using the same radius server for authentication. OVERVIEW The radius servers are to be provisioned by a some sort of system we will call Billing. Billing could simply be a script, a web front-end, or an actual integration into a billing system. Billing will provision to the master LDAP server. The master LDAP server is running slurpd, which will replicate all changes to the other radius servers. Each radius server will run a local instance of LDAP. The radius servers will be accepting Radius auth packets and Radius acct packets. The accounting packets will be stored locally on each radius server and then forwarded to the Accounting radius server, using radrelay. The Accounting radius server will store all the radius information in some sort of database such as MySQL, Postgres, or Oracle. The configuration of the actual Accounting radius server is outside the scope of this document. Please refer to the freeradius documentation for setting up that server. The Accounting radius server will help to provide a searchable interface to the accounting data for billing and usage purposes and could allow a web front-end to be built for helpdesk/customer service usage. If that is not needed for your purposes, then disregard all details about the Accounting radius server. In order to make sure no data is lost in the event of the Accounting radius server going down, the replication of data will take place using radrelay. Radrelay will do the equivalent of a tail on the detail file and will continually attempt to duplicate each radius packet that is stored in the detail file and send it off to the recipient(s) specified. Upon receipt of an accounting_response packet radrelay will consider that packet completed and continue working on the others. Each radius server will also be storing its own copy of all accounting packets that are sent to it. Each NAS will be setup with a primary radius server and a failover radius server. We will spread the load among the group of radius servers that we have so some are acting as a primary to some NAS's and acting as a secondary to others. In the event of a radius failure, the NAS should failover to the backup radius server. How to configure this is dependent on the particular NAS being used. Will use Radius acct data Billing will provision for real-time billing out to the Master LDAP server over LDAP +------------+ | Accounting | +---------+ | Radius | | Billing | +------------+ +----+----+ /|\ | | | | | | | | Provisioning | Message | | Duplicate | Acct | | | | \|/ | +------------+ | +------------------| LDAP Master| | | +------------+ | | | | Slurpd Slurpd Replication | Replication | | | | | | \|/ | | +------------+ | | | Radius2 | The Radius servers | | | LDAP Slave | will create a local | \|/ +------------+ copy of all acct +-------------+ packets and then | Radius1 | fwd a copy back | LDAP Slave | All Radius servers run a to accounting +-------------+ local copy of LDAP for /|\ /|\ Authorization and Authentication | | | | | | | | Auth Acct | | | | | | | | | | \|/ \|/ +-----------+ | | | | | NAS | | | +-----------+ The NAS will be setup to use one of the Radius servers as primary and the others as failover LDAP The LDAP directory is designed to start with the top level of dc=mydomain,dc=com. The next level of the tree contains the different services that will be stored within the ldap server. For the radius users, it will be specified as ou=radius. Below ou=radius, will be the different types of accounts. For example, ou=users will store the users and ou=profiles will store the default radius profiles. The profiles are entries that will be used to store group-wide radius profiles. The group ou=admins will be a place to enter the users for Billing, Freeradius, and any other administrative accounts that are needed. +---------------------+ | | | Dc=mydomain,dc=com |Objectclass:organizationalUnit | |Objectclass:dcObject +---------------------+ | | \|/ +---------------+ | | | Ou=radius | Objectclass:organizationalUnit | | +---------------+ | +-----------------------+-------------------------| | | | \|/ \|/ \|/ +---------+ +---------------+ +-------------+ | | | | | | |Ou=users | | Ou=profiles | | Ou=admins | | | | | | | +---------+ +---------------+ +------|------+ | | | | | | \|/ | \|/ ----- Objectclass: | ----- Objectclass: // \\ radiusprofile | // \\ person | | | | | \\ // | \\ // ----- \|/ ----- Dn:cn=freeradius Dn: uid=example,ou=users, ----- ObjectClass: ou=admins,ou=radius dc=mydomain,dc=com // \\ radiusprofile dc=mydomain,dc=com | | | | \\ // ----- Dn: uid=dial,ou=profiles,ou=radius,dc=mydomain,dc=com An example LDIF file is below. NOTE: There are unique radius attribute types and objectclasses, these will be explained in the configuration section. dn: dc=mydomain,dc=com objectClass: dcObject objectClass: organizationUnit ou: Mydomain.com Radius dc: mydomain dn: ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: radius dn: ou=profiles,ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: profiles dn: ou=users,ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: users dn: ou=admins,ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: admins dn: uid=dial,ou=profiles,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: dial radiusServiceType: Framed-User radiusFramedProtocol: PPP radiusFramedIPNetmask: 255.255.255.0 radiusFramedRouting: None dn: uid=isdn,ou=profiles,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: isdn radiusServiceType: Framed-User radiusFramedProtocol: PPP radiusFramedIPNetmask: 255.255.255.0 radiusFramedRouting: None dn: uid=example,ou=users,ou=radius,dc=mydomain,dc=com objectclass: radiusProfile uid: example userPassword: test radiusGroupName: dial radiusGroupName: isdn dn: cn=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com objectclass: person sn: freeradius cn: freeradius userPassword: freeradius dn: cn=billing,ou=admins,ou=radius,dc=mydomain,dc=com objectclass: person sn: freeradius cn: freeradius userPassword: billing dn: cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com objectclass: person sn: replica cn: replica userPassword: replica In order to configure the ldap server to understand the radius schema that we are using, the attribute types and objectclasses must be defined in slapd.conf. The file is included with the following line in slapd.conf: include /usr/local/etc/openldap/schema/RADIUS-LDAPv3.schema Below is the complete Schema ----Begin RADIUS-LDAPv3.schema---- ################################################# ##### custom radius attributes ################## objectIdentifier myOID 1.1 objectIdentifier mySNMP myOID:1 objectIdentifier myLDAP myOID:2 objectIdentifier myRadiusFlag myLDAP:1 objectIdentifier myObjectClass myLDAP:2 attributetype ( myRadiusFlag:1 NAME 'radiusAscendRouteIP' DESC 'Ascend VSA Route IP' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype (myRadiusFlag:2 NAME 'radiusAscendIdleLimit' DESC 'Ascend VSA Idle Limit' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype (myRadiusFlag:3 NAME 'radiusAscendLinkCompression' DESC 'Ascend VSA Link Compression' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype (myRadiusFlag:4 NAME 'radiusAscendAssignIPPool' DESC 'Ascend VSA AssignIPPool' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype (myRadiusFlag:5 NAME 'radiusAscendMetric' DESC 'Ascend VSA Metric' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) ################################################# attributetype ( 1.3.6.1.4.1.3317.4.3.1.1 NAME 'radiusArapFeatures' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.2 NAME 'radiusArapSecurity' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.3 NAME 'radiusArapZoneAccess' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.44 NAME 'radiusAuthType' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.4 NAME 'radiusCallbackId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.5 NAME 'radiusCallbackNumber' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.6 NAME 'radiusCalledStationId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.7 NAME 'radiusCallingStationId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.8 NAME 'radiusClass' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.45 NAME 'radiusClientIPAddress' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.9 NAME 'radiusFilterId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.10 NAME 'radiusFramedAppleTalkLink' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.11 NAME 'radiusFramedAppleTalkNetwork' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.12 NAME 'radiusFramedAppleTalkZone' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.13 NAME 'radiusFramedCompression' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.14 NAME 'radiusFramedIPAddress' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.15 NAME 'radiusFramedIPNetmask' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.16 NAME 'radiusFramedIPXNetwork' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.17 NAME 'radiusFramedMTU' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.18 NAME 'radiusFramedProtocol' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.19 NAME 'radiusFramedRoute' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.20 NAME 'radiusFramedRouting' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.46 NAME 'radiusGroupName' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.47 NAME 'radiusHint' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.48 NAME 'radiusHuntgroupName' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.21 NAME 'radiusIdleTimeout' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.22 NAME 'radiusLoginIPHost' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.23 NAME 'radiusLoginLATGroup' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.24 NAME 'radiusLoginLATNode' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.25 NAME 'radiusLoginLATPort' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.26 NAME 'radiusLoginLATService' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.27 NAME 'radiusLoginService' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.28 NAME 'radiusLoginTCPPort' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.29 NAME 'radiusPasswordRetry' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.30 NAME 'radiusPortLimit' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.49 NAME 'radiusProfileDn' DESC '' EQUALITY distinguishedNameMatch SYNTAX 1.3.6.1.4.1.1466.115.121.1.12 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.31 NAME 'radiusPrompt' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.50 NAME 'radiusProxyToRealm' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.51 NAME 'radiusReplicateToRealm' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.52 NAME 'radiusRealm' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.32 NAME 'radiusServiceType' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.33 NAME 'radiusSessionTimeout' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.34 NAME 'radiusTerminationAction' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.35 NAME 'radiusTunnelAssignmentId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.36 NAME 'radiusTunnelMediumType' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.37 NAME 'radiusTunnelPassword' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.38 NAME 'radiusTunnelPreference' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.39 NAME 'radiusTunnelPrivateGroupId' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.40 NAME 'radiusTunnelServerEndpoint' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.41 NAME 'radiusTunnelType' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.42 NAME 'radiusVSA' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.43 NAME 'radiusTunnelClientEndpoint' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) #need to change asn1.id attributetype ( 1.3.6.1.4.1.3317.4.3.1.53 NAME 'radiusSimultaneousUse' DESC '' SYNTAX 1.3.6.1.4.1.1466.115.121.1.27 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.54 NAME 'radiusLoginTime' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.55 NAME 'radiusUserCategory' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.56 NAME 'radiusStripUserName' DESC '' SYNTAX 1.3.6.1.4.1.1466.115.121.1.7 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.57 NAME 'dialupAccess' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.58 NAME 'radiusExpiration' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 SINGLE-VALUE ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.59 NAME 'radiusCheckItem' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) attributetype ( 1.3.6.1.4.1.3317.4.3.1.60 NAME 'radiusReplyItem' DESC '' EQUALITY caseIgnoreIA5Match SYNTAX 1.3.6.1.4.1.1466.115.121.1.26 ) objectclass ( 1.3.6.1.4.1.3317.4.3.2.1 NAME 'radiusprofile' SUP top STRUCTURAL DESC '' MUST ( uid ) MAY ( userPassword $ radiusArapFeatures $ radiusArapSecurity $ radiusArapZoneAccess $ radiusAuthType $ radiusCallbackId $ radiusCallbackNumber $ radiusCalledStationId $ radiusCallingStationId $ radiusClass $ radiusClientIPAddress $ radiusFilterId $ radiusFramedAppleTalkLink $ radiusFramedAppleTalkNetwork $ radiusFramedAppleTalkZone $ radiusFramedCompression $ radiusFramedIPAddress $ radiusFramedIPNetmask $ radiusFramedIPXNetwork $ radiusFramedMTU $ radiusFramedProtocol $ radiusCheckItem $ radiusReplyItem $ radiusFramedRoute $ radiusFramedRouting $ radiusIdleTimeout $ radiusGroupName $ radiusHint $ radiusHuntgroupName $ radiusLoginIPHost $ radiusLoginLATGroup $ radiusLoginLATNode $ radiusLoginLATPort $ radiusLoginLATService $ radiusLoginService $ radiusLoginTCPPort $ radiusLoginTime $ radiusPasswordRetry $ radiusPortLimit $ radiusPrompt $ radiusProxyToRealm $ radiusRealm $ radiusReplicateToRealm $ radiusServiceType $ radiusSessionTimeout $ radiusStripUserName $ radiusTerminationAction $ radiusTunnelAssignmentId $ radiusTunnelClientEndpoint $ radiusIdleTimeout $ radiusLoginIPHost $ radiusLoginLATGroup $ radiusLoginLATNode $ radiusLoginLATPort $ radiusLoginLATService $ radiusLoginService $ radiusLoginTCPPort $ radiusPasswordRetry $ radiusPortLimit $ radiusPrompt $ radiusProfileDn $ radiusServiceType $ radiusSessionTimeout $ radiusSimultaneousUse $ radiusTerminationAction $ radiusTunnelAssignmentId $ radiusTunnelClientEndpoint $ radiusTunnelMediumType $ radiusTunnelPassword $ radiusTunnelPreference $ radiusTunnelPrivateGroupId $ radiusTunnelServerEndpoint $ radiusTunnelType $ radiusUserCategory $ radiusVSA $ radiusExpiration $ dialupAccess $ radiusAscendRouteIP $ radiusAscendIdleLimit $ radiusAscendLinkCompression $ radiusAscendAssignIPPool $ radiusAscendMetric ) ) ----End RADIUS-LDAPv3.schema---- Now we need to setup the permissions on the ldap server. Notice above we created three users in the admin ou. These users will be specific for billing, freeradius, and replication. On the master ldap server, we will set the following permissions. access to attr=userPassword by self write by dn="cn=billing,ou=admins,ou=radius,dc=mydomain,dc=com" write by anonymous auth by * none access to * by self write by dn="cn=billing,ou=admins,ou=radius,dc=mydomain,dc=com" write by anonymous auth by * none This will give the billing user write access to add/delete users. For security we will not give read access to any other users. You can easily add another read-only user to this setup if you want to build some sort of web interface to do only reads. Now on the slave ldap servers (aka the radius servers) we will setup the following permissions. access to attr=userPassword by self write by dn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" write by anonymous auth by * none access to dn="ou=users,ou=radius,dc=mydomain,dc=com" by dn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" write by dn="cn=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com" read by anonymous auth by * none access to * by self write by dn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" write by anonymous auth by * none This will give the replica user write access. This user will be discussed below and it is involved in the process of replicating the master server to the slaves. The freeradius user only needs read access to do the lookups for authorization. Now we will want to setup indexes to speed up searches. At the minimum, below will work. Since all radius lookups are currently using the uid, we will want to index that. It is also a good idea to index the objectclass attribute. # Indices to maintain index objectClass eq index uid eq Now we need to setup the replication from the master to the slave servers. To do this, we will add the following to the slapd.conf file on the master: On the master LDAP server: replica host=radius1.mydomain.com binddn=cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com bindmethod=simple credentials=replica replica host=radius2.mydomain.com binddn=cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com bindmethod=simple credentials=replica We will need to add a replica for each slave LDAP server. The binddn is the name that is used to bind to the slave server, and the credentials is the secret for that user. On the slave LDAP servers: updatedn cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com updateref ldap://ldapmaster.mydomain.com Those will determine what name is allowed to update the LDAP server and if an update is attempted directly, what server to refer the update to. RADIUS The radius server is setup to use LDAP for both Authorization and Authentication. This section will describe what events will take place during an AAA session with a NAS. When the NAS sends a access_request to the radius server, the radius server will perform authorization and authentication based on a series of modules that are defined in radiusd.conf. For example, the module defined as ldap, will be used to make connections to the LDAP directory. An example is listed below. ldap { server = localhost identity = cn=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com password = example #this is the basedn to do searches on a user basedn = ou=users,ou=radius,dc=mydomain,dc=com #notice the username is the stripped user-name or user-name filter = (uid=%{Stripped-User-Name:-{User-Name}}) start_tls = no tls_mode = no #this maps ldap attributetypes to radius attributes dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_cache_timeout = 120 ldap_cache_size = 0 ldap_connections_number = 10 #password_header = {clear} #While integrating FreeRADIUS with Novell eDirectory, set #'password_attribute = nspmpassword' in order to use the universal password #of the eDirectory users for RADIUS authentication. This will work only if #FreeRADIUS is configured to build with --with-edir option. password_attribute = userPassword #Comment out the following to disable the eDirectory account policy check and #intruder detection. This will work only if FreeRADIUS is configured to build #with --with-edir option. #edir_account_policy_check=no groupname_attribute = radiusGroupName groupmembership_filter = (&(uid=%{Stripped-User-Name:-%{User-Name}}) (objectclass=radiusprofile)) groupmembership_attribute = radiusGroupName timeout = 3 timelimit = 5 net_timeout = 1 compare_check_items = no #access_attr_used_for_allow = yes } The first thing that is done is authorization of the user. The radius server will process the modules in the order specified in the authorization section of radiusd.conf. Currently, they are in the following order. preprocess suffix files ldap The first module will be preprocess. This will first check the huntgroups of the user coming in. The huntgroups are defined in the file huntgroups and they are a group listing of the NAS-IP-Addresses that make the access_request. This is useful in creating specific actions based on the NAS-IP that the request is made from. An example, is below: isdncombo NAS-IP-Address == 10.10.10.1 dialup NAS-IP-Address == 10.10.10.2 dialup NAS-IP-Address == 10.10.10.3 We will have one NAS that is used for both ISDN and regular dialup customers, the other NAS's will be only used for dialup. The preprocess module may also use the hints file, to load hints to the radius server, and add additional hacks that are based on the type of request that comes in. This is to help with certain NAS's that don't conform to radius RFC's. Check the comments in radiusd.conf for an explanation on those. The second module is suffix. This event will determine which realm the user is in, based on the User-Name attribute. It is currently setup to split the username at the occurence of the @symbol. For example, the username of example@mydomain.com, will be split into example and mydomain.com. The realm is then checked against the file proxy.conf, which will determine what actions should be taken for that realm. Certain realms can be setup to be proxied to a different radius server or set to authenticate locally. Also, the username can be setup to be stripped from the realm or left intact. An example of proxy.conf, is listed below. If the realm is to be proxied, then a secret is needed, which is the secret of the radius server it is to be proxied to. By default the User-Name will be stripped, unless the nostrip option is set. Currently we will not be using realms with our users, but adding this ability in the future will be much easier with already incorporating proxy.conf into the setup. proxy server { synchronous = no retry_delay = 5 retry_count = 3 dead_time = 120 servers_per_realm = 15 default_fallback = yes } realm NULL { type = radius authhost = LOCAL accthost = LOCAL #secret = testing123 } realm DEFAULT { type = radius authhost = LOCAL accthost = LOCAL #secret = testing123 } The next module is files, which is commonly know as the users file. The users file will start with either a username to determine how to authorize a specific user, or a DEFAULT setting. In each line it will define what items must be present for there to be a match in the form of attribute == value. If all the required attributes are matched, then attributes specified with attribute := value will be set for that user. If no match is found the users file will continue to be processed until there is a match. The last DEFAULT setting will be set as a catch-all, in case there is no previous match. If a match is made, the statement of Fall-Through determines if the users file should continue to be processed or if it should stop right there. The Ldap-Group corresponds to the LDAP attribute of radiusGroupName (see ldap configuration above). The user may be assigned multiple radiusGroupNames, one for each of the services that the user is authorized for. If the user does belong to the correct group, then the user will be authorized for that type of access. If the user does not belong to that group, then there will not be a match and the users file will continue to be processed. If a match is made and there is a User-Profile set, then the radius server will lookup the attributes that exist in that User-Profile in the LDAP directory. These are radius attributes that will be sent to the NAS as a reply-item. An example users file is below. DEFAULT Ldap-Group == disabled, Auth-Type := Reject Reply-Message = "Account disabled. Please call the helpdesk." DEFAULT Huntgroup-Name == isdncombo, NAS-Port-Type == Async, Ldap-Group == dial, User-Profile := "uid=dial,ou=profiles,ou=radius,dc=mydomain,dc=com" Fall-Through = no DEFAULT Huntgroup-Name == isdncombo, NAS-Port-Type == ISDN, Ldap-Group == isdn, User-Profile := "uid=isdn,ou=profiles,ou=radius,dc=mydomain,dc=com" Fall-Through = no DEFAULT Huntgroup-Name == dial, Ldap-Group == dial, User-Profile := "uid=dial,ou =profiles,ou=radius,dc=mydomain,dc=com" Fall-Through = no DEFAULT Auth-Type := Reject Reply-Message = "Please call the helpdesk." Notice that the catchall DEFAULT is set to Reject the user. This will stop the authorization and immediately send back an access_reject message. Because business rules are applied above to each scenario where the user will be authorized for access, if no match is found, then we will want to stop the process immediately to save resources. By using the Ldap-Group feature we can limit user logins to only the services they are subscribed to. Some examples of possible user setups are below. #user with access to dial-up dn: uid=user1,ou=users,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: user1 userPassword: whatever radiusgroupname: dial #user with access to ISDN and dial dn: uid=user2,ou=users,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: user2 userPassword: whatever radiusgroupname: dial radiusgroupname: isdn #same user as above that was suspended for not paying dn: uid=user2,ou=users,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: user2 userPassword: whatever radiusgroupname: dial radiusgroupname: isdn radiusgroupname: disabled Now that we have authorized the user, the final piece is to authenticate the user. Authentication is currently done by checking if the password sent in the access_request packet is correct. This action will be done with an attempted bind to the LDAP server using the User-Name and User-Password attributes passed to it from the access_request. If the user is successfully authorized, then an access_accept message will be sent back to the NAS, with any reply items that were defined in the authorization section. If the user did not supply the correct password, then an access_reject message will be sent to the user. If the NAS is sent an access_accept packet then the user will be given access to the service and the NAS will then send an acct_request packet. This will be a request packet to start a radius accounting session. The way the server will log the accounting packets is determined in the detail module in the radiusd.conf file. Since we will be storing a local copy and forwarding on all accounting to the Accounting radius server, we will store two local copies on the machine. The first one is done in a regular detail file as defined in the following: detail detail1 { detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d detailperm = 0600 dirperm = 0755 } The second detail file will be used by the program radrelay to relay a copy of all accounting packets to the Accounting radius server. This file is stored as a catchall for all accounting packets. The radrelay program will basically do a tail on that file and will then attempt to send a copy of each addition to it to the Accounting server. If the copy is successfully sent, then it will be deleted from this file. If the Accounting server were to go down, then this file will continue to build up entries. As soon as the Accounting server is back online, an attempt to re-send the packets to the Accounting server will made. This file is defined in the following section of radiusd.conf: detail detail2 { detailfile= ${radacctdir}/detail-combined detailperm = 0600 dirperm = 0755 locking = yes } INSTALLATION The new radius servers are currently built on Freebsd 4.8. As the version may eventually change, these instructions may no longer apply. The steps for building the server are the following: Install FreeBSD Install other FreeBSD items Install OpenLDAP *NOTE: this must be done before installing Freeradius Install FreeRadius Under the assumption that FreeBSD is already installed and the kernel rebuilt to the specifications needed for the machine, there are several other things that may be needed at this time and the purpose of this is just as a reminder. install cvsup-without-gui from the ports collection -run cvsup on all to update the ports to the most recent versions might be a good idea to upgrade the src -edit and run cvsup on /usr/share/examples/cvsup/standard-supfile -cd /usr/src - vi Makefile and follow instructions install sendmail from ports to keep up to date with the most recent versions. In the ports collection /ports/mail/sendmail run make; make install; make mailer.conf. Then edit rc.conf and change to sendmail_enable=NO -radius servers only need the local interface to send daily reports edit rc.conf to make sure inetd_enable=NO -no reason to have extra services running if you rebuilt the kernel to add support for IPFIREWALL, then remember to add a firewall rule to rc.conf -firewall_enable=YES -firewall_type=OPEN (or actually create a real firewall rule) add crontab to keep date accurate for accounting 15 03 * * * /usr/sbin/ntpdate -s thetimeserver.mydomain.com install openldap from ports download the freeradius source as the ports collection is often outdated -the default settings are /usr/local/etc/raddb, /var/log/radius.log, /var/log/radacct -since openldap was installed first, you should not need any special flags to add ldap support Now its time to configure openlap and freeradius. First we will be looking at configuring OpenLDAP -copy RADIUS-LDAPv3.schema to /usr/local/etc/openldap/schema -edit /usr/local/etc/openldap/slapd.conf ----Begin slapd.conf---- # $OpenLDAP: pkg/ldap/servers/slapd/slapd.conf,v 1.23.2.7 2003/03/24 03:54:12 #kurt Exp $ # # See slapd.conf(5) for details on configuration options. # This file should NOT be world readable. # include /usr/local/etc/openldap/schema/core.schema include /usr/local/etc/openldap/schema/RADIUS-LDAPv3.schema # Define global ACLs to disable default read access. # Do not enable referrals until AFTER you have a working directory # service AND an understanding of referrals. #referral ldap://root.openldap.org loglevel 296 pidfile /var/run/slapd.pid argsfile /var/run/slapd.args # Load dynamic backend modules: # modulepath /usr/local/libexec/openldap # moduleload back_bdb.la # moduleload back_ldap.la # moduleload back_ldbm.la # moduleload back_passwd.la # moduleload back_shell.la password-hash {SSHA} access to attr=userPassword by self write by dn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" write by anonymous auth by * none access to dn="ou=users,ou=radius,dc=mydomain,dc=com" by dn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" write by dn="cn=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com" read by anonymous auth by * none access to * by self write by dn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" write by anonymous auth by * none ####################################################################### # ldbm database definitions ####################################################################### database bdb suffix "dc=mydomain,dc=com" rootdn "cn=root,dc=mydomain,dc=com" # Cleartext passwords, especially for the rootdn, should # be avoid. See slappasswd(8) and slapd.conf(5) for details. # Use of strong authentication encouraged. rootpw {SSHA}Eu5EwPxTrwhEGrXQ9SaQZyfpu4iHt3NP # The database directory MUST exist prior to running slapd AND # should only be accessible by the slapd and slap tools. # Mode 700 recommended. directory /var/db/openldap-data # Indices to maintain index objectClass eq index uid eq mode 0600 cachesize 2000 # replica one for each #replica host=radius1.mydomain.com # binddn="cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com" # bindmethod=simple credentials=secret replogfile /var/db/openldap-slurp/replog ## REMEMBER TO ADD THIS TO THE SLAVES updatedn "cn=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com" updateref ldap://ldapmaster.mydomain.com ----End slapd.conf---- To create a rootdn that is not stored in plain text, enter the following command. $ slappasswd it will ask for password and verification New password: Re-enter new password:: -while in the shell create the directory for the ldap database, this must be created before slapd can start $ mkdir /var/db/openldap-data -move the slapd.sh.sample file to slapd.sh in /usr/local/etc/rc.d $ mv /usr/local/etc/rc.d/slapd.sh.sample slapd.sh -enable logging in /etc/syslog.conf by adding the following: local4.* /var/log/ldap.log restart syslogd -start it up on both the master and slave ldap servers $ /usr/local/etc/rc.d/slapd start -create the structural ldif, schema.ldif ----Begin schema.ldif---- dn: dc=mydomain,dc=com objectClass: dcObject objectClass: organizationUnit ou: Mydomain.com Radius dc: mydomain dn: ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: radius dn: ou=profiles,ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: profiles dn: ou=users,ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: users dn: ou=admins,ou=radius,dc=mydomain,dc=com objectclass: organizationalunit ou: admins dn: uid=dial,ou=profiles,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: dial radiusServiceType: Framed-User radiusFramedProtocol: PPP radiusFramedIPNetmask: 255.255.255.0 radiusFramedRouting: None dn: uid=isdn,ou=profiles,ou=radius,dc=mydomain,dc=com objectclass: radiusprofile uid: isdn radiusServiceType: Framed-User radiusFramedProtocol: PPP radiusFramedIPNetmask: 255.255.255.0 radiusFramedRouting: None dn: uid=example,ou=users,ou=radius,dc=mydomain,dc=com objectclass: radiusProfile uid: example userPassword: test radiusGroupName: dial radiusGroupName: isdn dn: cn=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com objectclass: person sn: freeradius cn: freeradius userPassword: freeradius dn: cn=billing,ou=admins,ou=radius,dc=mydomain,dc=com objectclass: person sn: freeradius cn: freeradius userPassword: billing dn: cn=replica,ou=admins,ou=radius,dc=mydomain,dc=com objectclass: person sn: replica cn: replica userPassword: replica ----End schema.ldif---- -add the organizational structure to the master ldap database $ ldapadd -D uid=billing,ou=admins,ou=radius,dc=mydomain,dc=com -w billing -f schema.ldif -h ldapmaster.mydomain.com -run slapcat to see what the directory looks like $ slapcat If all went well the LDAP directory should be up and running and propagated to the slaves. Now you can add your users to the master. Now its time to setup FreeRadius. First cd into /usr/local/etc/raddb and take a look at all the configuration files, they are heavily documented so you may wish to read through them all before making and changes. -edit radiusd.conf ----Begin radiusd.conf---- ## ## radiusd.conf -- FreeRADIUS server configuration file. ## prefix = /usr/local exec_prefix = ${prefix} sysconfdir = /usr/local/etc/raddb localstatedir = ${prefix}/var sbindir = ${exec_prefix}/sbin logdir = /var/log raddbdir = /usr/local/etc/raddb radacctdir = /var/log/radacct # Location of config and logfiles. confdir = ${raddbdir} run_dir = ${localstatedir}/run/radiusd log_file = ${logdir}/radius.log libdir = ${exec_prefix}/lib pidfile = ${run_dir}/radiusd.pid #user = nobody #group = nobody max_request_time = 30 delete_blocked_requests = no cleanup_delay = 5 max_requests = 0 bind_address = * port = 0 hostname_lookups = no allow_core_dumps = no regular_expressions = yes extended_expressions = yes log_stripped_names = no log_auth = no log_auth_badpass = no log_auth_goodpass = no # The program to execute to do concurrency checks. #checkrad = ${sbindir}/checkrad security { max_attributes = 200 reject_delay = 0 status_server = no } proxy_requests = yes $INCLUDE ${confdir}/proxy.conf $INCLUDE ${confdir}/clients.conf thread pool { start_servers = 5 max_servers = 32 min_spare_servers = 3 max_spare_servers = 10 max_requests_per_server = 0 } modules { ldap { server = "localhost" identity = "uid=freeradius,ou=admins,ou=radius,dc=mydomain,dc=com" password = example basedn = "ou=users,ou=radius,dc=mydomain,dc=com" filter = "(&(uid=%{Stripped-User-Name:-%{User-Name}}) (objectclass=radiusprofile)" start_tls = no tls_mode = no #default_profile = "uid=dial,ou=profiles,ou=radius,dc=mydomain,dc=com" #profile_attribute = "radiusProfileDn" dictionary_mapping = ${raddbdir}/ldap.attrmap ldap_cache_timeout = 120 ldap_cache_size = 0 ldap_connections_number = 10 #password_header = "{clear}" password_attribute = userPassword groupname_attribute = radiusGroupName groupmembership_filter = "(&(uid=%{Stripped-User-Name:-%{User-Name}})) (objectclass=radiusProfile)" groupmembership_attribute = radiusGroupName timeout = 3 timelimit = 5 net_timeout = 1 compare_check_items = no #access_attr_used_for_allow = yes } realm suffix { format = suffix delimiter = "@" } preprocess { huntgroups = ${confdir}/huntgroups #hints = ${confdir}/hints with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no } files { usersfile = ${confdir}/users #acctusersfile = ${confdir}/acct_users compat = no #use old style users } # regular detail files detail detail1 { detailfile = ${radacctdir}/%{Client-IP-Address}/detail-%Y%m%d detailperm = 0600 dirperm = 0755 } # temp detail file to replicate to accountrad detail detail2 { detailfile= ${radacctdir}/detail-combined detailperm = 0600 dirperm = 0755 locking = yes } acct_unique { key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port-Id" } #radutmp { # filename = ${logdir}/radutmp # perm = 0600 # callerid = "yes" #} #radutmp sradutmp { # filename = ${logdir}/sradutmp # perm = 0644 # callerid = "no" #} #attr_filter { # attrsfile = ${confdir}/attrs #} # The "always" module is here for debugging purposes. Each # instance simply returns the same result, always, without # doing anything. always fail { rcode = fail } always reject { rcode = reject } always ok { rcode = ok simulcount = 0 mpp = no } # # The 'expression' module current has no configuration. expr { } } instantiate { expr } authorize { preprocess suffix files ldap } authenticate { authtype LDAP { ldap } } preacct { preprocess suffix files } accounting { acct_unique detail1 detail2 #radutmp #sradutmp } #session { #radutmp #} #post-auth { # Get an address from the IP Pool. #main_pool #} ----End radiusd.conf---- -edit huntgroups to specify a NAS to a huntgroup ----Begin huntgroups---- # dialup and isdn isdncombo NAS-IP-Address == 10.10.10.1 # just dialup dialup NAS-IP-Address == 10.10.10.2 dialup NAS-IP-Address == 10.10.10.3 ----End huntgroups---- -edit proxy.conf to setup the different realms ----Begin proxy.conf---- proxy server { synchronous = no retry_delay = 5 retry_count = 3 dead_time = 120 servers_per_realm = 15 default_fallback = yes } realm NULL { type = radius authhost = LOCAL accthost = LOCAL #secret = testing123 } realm DEFAULT { type = radius authhost = LOCAL accthost = LOCAL #secret = testing123 } ----End proxy.conf---- -edit clients.conf to setup the NAS's that can talk to it ----Begin clients.conf---- client 127.0.0.1 { secret = example shortname = localhost nastype = other } # isdn and dialup nas client 10.10.10.1 { secret = example shortname = isdn nastype = cisco } #dialup only client 10.10.10.2 { secret = example shortname = dialup1 nastype = cisco } client 10.10.10.3 { secret = example shortname = dialup2 nastype = cisco } ----End clients.conf---- You may wish to look at the other files, but they should all be OK by default. -create startup files in /usr/local/etc/rc.d -radiusd.sh - the radiusd startup file ----Begin radiusd.sh---- #!/bin/sh case "$1" in start) /usr/local/sbin/radiusd echo -n ' radiusd' ;; stop) if [ -f /usr/local/var/run/radiusd/radiusd.pid ]; then kill -TERM `cat /usr/local/var/run/radiusd/radiusd.pid` rm -f /usr/local/var/run/radiusd/radiusd.pid echo -n ' radiusd' fi ;; restart) if [ -f /usr/local/var/run/radiusd/radiusd.pid ]; then kill -HUP `cat /usr/local/var/run/radiusd/radiusd.pid` echo 'radiusd restarted' fi ;; *) echo "Usage: ${0##*/}: { start | stop | restart }" 2>&1 exit 65 ;; esac ----End radiusd.sh---- -radrelay.sh - the radrelay startup file ----Begin radrelay.sh---- #!/bin/sh case "$1" in start) /usr/local/bin/radrelay -a /var/log/radacct -d /usr/local/etc/raddb \ -S /usr/local/etc/raddb/radrelay_secret -f -r accounting.mydomain.com:1813 \ detail-combined echo -n ' radrelay started' ;; stop) /usr/bin/killall radrelay echo ' radrelay stopped' ;; *) echo "Usage: $[0##*/}: { start | stop }" 2>&1 exit 65 ;; esac ----End radrelay.sh---- -create radrelay_secret in /usr/local/etc/radddb This file will contain the secret to connect to the Accounting radius server ----Begin radrelay_secret---- example ----End radrelay_secret---- Now fire them up $ /usr/local/etc/rc.d/radiusd.sh start $ /usr/local/etc/rc.d/radrelay.sh start You should be all set to start testing now. OTHER RANDOM NOTES AND THOUGHTS The client programs used to connect to the ldap directory are: -ldapadd to add a record -ldapmodify to modify a record -ldapdelete to delete a record -ldapsearch to search for a record -slapcat to show the entire directory -slappaswd to generate a crypted password Read the man pages on those commands, they tell you everything you need to know. They all follow this basic syntax. $ ldapwhatever -D "uid=someone,ou=admins,ou=radius,dc=mydomain,dc=com" -w thesecret -andthenotherstuff Finally, if you are having trouble with LDAP, run it in debug mode by changing the following in slapd.sh: slapd_args= to slapd_args= '-d 3' There is a program included with freeradius to test the radius server, its called radclient. Typing it alone will tell you all the options. You will need to create a file that contains radius attributes, such as: User-Name = example User-Password = test Service-Type = Framed-User NAS-IP-Address = 10.10.10.1 NAS-Port-Type = Async Then you fire that radius packet at the server by issuing: $ radclient -f testradiusfile localhost auth thesecret -f = filename localhost is the server you are hitting auth or acct depending on the type of packet thesecret to connect to that server Finally, if you are having trouble you can run radius in debug mode and it will output everything that happens to the screen. To do that, kill the current process and run: $ radiusd -X LINKS FREERADIUS: Main Site: -http://www.freeradius.org Documentation: -http://www.freeradius.org/radiusd/doc OPENLDAP: Main Site -http://www.openldap.org Documentation: Administrator's Guide -http://www.openldap.org/doc/admin21 RFCs: RFC2865: RADIUS Authentication -http://www.freeradius.org/radiusd/doc/rfc/rfc2865.txt RFC2866: RADIUS Accounting -http://www.freeradius.org/radiusd/doc/rfc/rfc2866.txt RFC2869: RADIUS Extentions -http://www.freeradius.org/radiusd/doc/rfc/rfc2869.txt RFC2251: LDAP v3 -http://www.ietf.org/rfc/rfc2251.txt RFC2252: LDAP v3 Attribute Syntax Definitions -http://www.ietf.org/rfc/rfc2252.txt RFC2253: LDAP UTF-8 String Representation of Distinguishe d Names (DNs) -http://www.ietf.org/rfc/rfc2252.txt RFC2849: LDAP Data Interchange Fromat (LDIFs) -http://www.ietf.org/rfc/rfc2849.txt RFC3377: LDAP v3 Technical Specs -http://www.ietf.org/rfc/rfc3377.txt