#!/bin/sh
# 
# fax - script to make, send, receive, view or print a fax
# Copyright 1993-1999 by Ed Casas 
# 
# --- Start of user configuration section --- 
# 
# Notes: 
#
#  - do not put spaces before or after the equal (=) signs.
#
#  - variables can also be set on the command line, for example:
#       fax DEV=cua0 send file.ps
#    or in a configuration file (see CONFIGFILES below)
#

# The names of the fax script, efax and efix, including full path
# if necessary.

FAX=fax
EFAX=efax
EFIX=efix

# The device to which the fax modem is connected (e.g. ttya for
# /dev/ttya).  Use a dial-out (cua) device if available.  If
# there are links to this device then all programs must use same
# name or the UUCP locking mechanism will fail.  For example, if
# /dev/modem is a link to /dev/cua1, then getty, uucp, kermit,
# pppd, dip, etc. must *all* use either /dev/modem or /dev/cua1.
#
# To support port sharing the answer mode device may be different
# than the send or receive device.
#
# The alternate devices are used when a primary device doesn't exist.
# This can be useful when supporting multiple kinds of modems.

DEV=cu.usbmodem
DEVANSWER=tty.usbmodem

ALTDEV=cu.modem
ALTDEVANSWER=tty.modem

if [ ! -e /dev/$DEV -a "x$ALTDEV" != "x" -a -e /dev/$ALTDEV ]; then
    DEV=$ALTDEV
fi

if [ ! -e /dev/$DEVANSWER -a "x$ALTDEVANSWER" != "x" -a -e /dev/$ALTDEVANSWER ]; then
    DEVANSWER=$ALTDEVANSWER
fi

# Your fax number in international format, 20 characters maximum.
# Use only digits, spaces, and the "+" character.

FROM="+1 800 555 5555"

# Your name as it should appear on the page header.

NAME="Put Your Name Here"

# The preferred page size for creating and printing faxes.
# Allowed values are "letter", "legal", and "a4".

PAGE=letter
# PAGE=legal
# PAGE=a4

# The type of printer. Use 'pcl' for HP-PCL or 'ps' for
# Postscript.  See definition of PRINT (below) for more options.

PRTYPE=ps				# Postscript (e.g. Apple LaserWriter)
# PRTYPE=pcl				# HP-PCL (e.g. HP LaserJet) 

# The command to print image files from standard input.  Typically
# this is "lpr" or "lp".

PRCMD="lpr"

# The command to view a Portable Gray Map (PGM) image from the
# standard input.  Typically "xv -" or "xloadimage stdin".

VIEWCMD="xloadimage stdin"		# best
# VIEWCMD="pnmtoxwd | xwud"		# slower alternative
# VIEWCMD="xv -"			# much slower alternative	

# The name of the Ghostscript executable including full path if
# necessary.  Only required if faxing Postscript files.

GS=gs

# Dial string prefix and suffix such as T for tone dialing, P for
# pulse dialing, 9 to get an external line, commas for delays or
# W to wait for dial tone.  See definition of TELCVT below if you
# have more complex requirements.

DIALPREFIX="T"
DIALSUFFIX=""

# The name(s) of lock file(s) according to your system's
# conventions. Protect with single quotes for delayed evaluation.
# Add a leading '#' to the file name to use binary format.

# LOCK='-x /var/lock/LCK..$DEV'			# modern systems
# LOCK='-x /usr/spool/uucp/LCK..$DEV'		# older systems
# LOCK='-x /var/lock/LCK..$DEV -x /var/spool/uucp/LCK..$DEV' # both
# LOCK='-x #/usr/spool/uucp/LCK..$DEV'		# binary format
# LOCK='-x /usr/spool/locks/LK.047.040.011'	# SysV style names
LOCK=''					# no lock file

# Uncomment one of the following lines to force xon/xoff flow
# control only if you have one of the types of modems listed.

# FCINIT='-j\Q4'		# AT&T (Dataport, Paradyne)
# FCINIT='-j\Q1'		# Motorola (Power Modem, 3400 Pro,...)
# FCINIT='-j*F1'		# QuickComm (Spirit II)
# FCINIT='-j&H2&I0&R1&D3I4'	# USR (Courier, Sportster)
# FCINIT='-or'			# Multi-Tech (for bit reversal)

# FCINIT="$FCINIT -j+FBO=0"	# USR modems using Class 2.0

# ****************************************************************
# The remaining options probably won't need to be changed.
# ****************************************************************

# Configuration files that are sourced if they exist.  Comment
# out if you don't need to use config files. Warning: any type of
# shell command in these files will be executed.

CONFIGFILES="/etc/efax.rc ${HOME:-~}/.efaxrc ./.efaxrc"

# A command that will generate unique names for logs and received
# files.  'date +%m%d%H%M%S' works on most systems.  Protect with
# single quotes.

TSTAMP='date +%m%d%H%M%S'
# TSTAMP='echo $$'		# alternative - use process number

# Shell command to convert aliases to phone numbers when sending
# faxes.  When executed $1 will be the alias and $f the file name
# to search.  The example below uses a directory file where alias
# lines start with the keyword "fax" followed by the alias in
# parentheses and a colon.  The remainder of the line is taken to
# be the phone number. Other lines are ignored.  For example, if
# one of the files in DIRFILES (defined below) contained the line
# "fax(kpmg): 691-3031", you could use the command "fax send kpmg
# invoice.24". Protect with single quotes.

LOOKUP='eval sed -n -e "/^fax($1):/{" -e "s/^[^:]*://p" -eq -e"}" $f'

# List of telephone directory file(s) to be searched.  The
# default is the file .faxdir in the user's home directory.

DIRFILES="${HOME:-.}/.faxdir"

# Shell command to convert phone numbers to dial strings.  This
# lets you to store numbers without the long distance or
# alternate carrier access codes, passwords, accounting digits,
# etc.  In the examples below this is used to convert numbers
# beginning with '+'; the first substitution handles same-country
# calls and the second handles international calls.

TELCVT='sed -e s/+1/1/ -e s/+/011/'	# North America
# TELCVT='sed -e s/+61/0/ -e s/+/0011/' # Australia
# TELCVT='sed -e s/+44/0/ -e s/+/00/'	# UK
# TELCVT='sed -e s/+49/0/ -e s/+/00/'	# Germany
# TELCVT='sed -e s/+852// -e s/+/001/'	# Hong Kong
# TELCVT='sed -e s/+33// -e s/+/19W/'	# France (?)
# TELCVT='sed -e s/+34/0/ -e s/+/07W/'	# Spain
# TELCVT='sed -e s/+1/10288/'		# use AT&T
# TELCVT='sed -e s/+/T82W1682W9W/'	# get out of PBX

# efix options to use a bitmap font for text-to-fax conversion.
# The option -l66 puts 66 lines of text per page, -d1,1 sets 1
# inch top & left margin.  Comment these out to use the built-in
# font. Use "fax makefont" to make bitmap fonts from Postscript
# fonts.

# TEXTFONT="-l66 -d1,1 -f /usr/bin/efaxfont"

# efax options to specify a different font for headers. Generate
# using "fax makefont."

# HDRFONT="-f /usr/bin/efaxfont"

# Dimensions of page sizes.

PAGE_letter="8.465x11in"	# fax width x letter length
PAGE_legal="8.465x14in"		# fax width x legal length
PAGE_a4="21x29.7cm"		# ISO A4

# Default resolution for converting to fax format. Can only be
# 204x196 or 204x98.

RES=204x196			# default "Fine" resolution (196 lpi)
# RES=204x98			# standard resolution (98 lpi)

# When the print and view commands below are executed, $f will be
# the input file name and $PAGEDIM will be one of the above page
# dimensions. Protect with single quotes.

# PRINT: A command to convert fax files to a printable format.
# For printers other than Postscript or PCL you can use efix's
# PBM output and an appropriate pbm filter (such as pbmtoepson)
# or efix's Postsript output and Ghostscript as a filter. Change
# the scaling (-s) and displacement (-d) options as required to
# fit the image onto the area your printer can print.

PRINT='$EFIX -ve -p$PAGEDIM -r300 -s0.98 -d0,0.125 -o$PRTYPE $f'

# example using pbm utilities:
# PRINT='$EFIX -ve -p$PAGEDIM -r60x72 -opbm $f | pbmtoepson'

# example using Ghostscript:
# PRINT='$EFIX -ve -p$PAGEDIM -r120x144 -ops $f | \
#	$GS -q  -sPAPERSIZE=$PAGE -sDEVICE=epson -r120x144 \
#	-dNOPAUSE -dSAFER -sOutputFile=- - '

# VIEW: A command to convert fax files to PGM format for
# previewing.  efix's pgm output reduces image dimensions by 4X.

# VIEW='$EFIX -ve -p$PAGEDIM -r200 -opgm $f' 	# 50dpi: fast, whole-page view
VIEW='$EFIX -ve -p$PAGEDIM -r300 -opgm $f'	# 75dpi: slower, readable size

# Commands to set up modem.  "-iZ -iE0&D2S7=120"
# works with almost all modems.  See the efax(1) man page for
# details.

INIT="-iZ -i&FE0&D2S7=120"

# Command(s) to reset modem when efax finishes. "-kZ" works in
# almost all cases.

RESET="-kZ"
# RESET="-kZ -k&F+FCLASS=0"	# for modems that stay in fax mode after reset

# Speaker mode(M) and loudness(L). Mn sets speaker mode where n
# means: 0:never, 1:until carrier, 2:always, 3:on receive only.

SPKR="-iM1L0"

# Options to use a particular command sets.  Normally efax
# selects the command set based on the modem's capabilities.  Use
# -o1 to force Class 1, -o2 for Class 2 and -o0 for Class 2.0.
# Class 2 is not the same as Class 2.0

CLASSINIT="-o1"	# Class 1
# CLASSINIT=""		# Class 2
# CLASSINIT="-o0"	# Class 2.0

# The modem's capabilities for sending faxes.  Normally efax
# chooses these by querying the modem.  "-c 1,3,0,0,0,0,0,0"
# forces 9600 bps maximum speed.  See the efax(1) man page for a
# description of the fields.

# TXCAP="-c 1,3,0,2,0,0,0,0"

# Capabilities for receiving faxes.  Usually the same as TXCAP.
# If your modem only receives at 4800 bps use "-c 1,1,0,0,0,0,0,0".

# RXCAP="$TXCAP"

# Additional options required only for transmit or only for
# receive.  None normally required.

RXINIT=""
TXINIT=""

# Command to make a date for the page header. Protect with single
# quotes.  'date "+%Y/%m/%d %H:%M"' works on most systems.

DATECMD='date "+%Y/%m/%d %H:%M"'	# YYYY/MM/DD HH:MM (24hour)
# DATECMD='date'			# longer, more readable

# Page header format.  You may use $DATE, $NAME, $FROM, $TO, and
# "%d/%d" (for page number and count).  Protect with single
# quotes.  Example: '$DATE $FROM $NAME p. %d/%d'.

HDR='$DATE     $FROM      $NAME     p. %d/%d'

# BUSYRETRIES is a list of delays in seconds between attempts to
# redial busy numbers.  Comment out if you don't want to retry
# busy numbers.

BUSYRETRIES="30 60 120 300 60 600 60 60 1200 60 60"

# FAILRETRIES is a list of delays in seconds between attempts to
# retry failed transmissions.  Retries are only attempted if at
# least one page was sent in the previous attempt. Retries
# include only pages not already sent. Comment out if you don't
# want to retry failed transmissions.

FAILRETRIES="300 300"	# try two more times at 5 minute intervals

# Command to run another program (efax) at a higher-than-normal
# scheduling priority.  This command isn't used if it fails
# (e.g. because the current user isn't privileged).  Comment this
# out if it causes problems.

NICE="nice -n -10"

# Standard versions of commands that are often aliased.

RM="/bin/rm -f"
LS="/bin/ls"

# Messages to display.  VERB sets the messages displayed (stderr)
# and VERBLOG the messages written to log files (stdout).

VERB="ewin"		# show errors, warnings, progress & negotiation
VERBLOG="chewmainrxtf"	# log everything

# ****************************************************************
# The remaining configuration options apply only to the `fax
# answer' command.  You can ignore these if you will only be
# running efax manually.  See "USING INIT TO RUN EFAX" in the
# efax man page for more information.
# ****************************************************************

# device or file where fatal error messages should be written

CONSOLE=/dev/console

# The directory to store incoming faxes and log files.  This directory
# should already exist and be writable by the user(s) of this script.

FAXDIR=/var/spool/fax
LOGDIR=/var/log/fax

# The strftime(3) pattern that generates the file name for
# received files.  For example, at 10:45:36 on February 25,
# "%m%d%H%M%S" would produce 0225104536, "%j-%H%M" would produce
# 056-1045, and %d%b%H%M 25Feb1045.

ANSFNAME="%m%d%H%M%S"

# umask for received files. Use 022 to allow anyone to retrieve faxes.

UMASK=022

# The user to be sent mail when a fax is received.

FAXMGR=root

# The sendmail executable including full path if necessary.  Only
# required if forwarding received faxes by e-mail in $NOTIFY.

SENDMAIL=/usr/sbin/sendmail

# The command to execute when a fax is received.  Normally this
# sends FAXMGR e-mail or prints the received fax.  The variable
# $f will be the name of the log file, $FILES will contain the
# names of the received files, and $REMID will have the remote ID
# string or '?' if none. The faxmail function will e-mail the fax
# as MIME image/tiff attachments.  Comment this out to do
# nothing.  Protect with single quotes.

NOTIFY='faxmail | $SENDMAIL $FAXMGR'
# NOTIFY='mail -s "fax/message from $REMID: $FILES" $FAXMGR <$f'
# NOTIFY='lpr $f ; $FAX print $OPT $FILES'

# The number of rings to wait before answering.

ANSRINGS=4

# If you want to enable fax/data adaptive answer (AA) read the
# efax man page and define DATAINIT to be the options that enable
# AA. Note: AA does not work properly on some (2400/9600) modems
# unless the modem initialization is done at 2400 bps (not
# possible with efax). USR modems do not support modem adaptive
# answer (+FAE=) in Class 1.  &C1 enables most modems' DCD line
# so a signal can be sent to shells when a call is dropped.  You
# must also define DCMD (see below).

DATAOPT="-j&C1 -j+FCLASS=0 -jS7=30"
# DATAINIT="$DATAOPT -j+FAE=1"		# Class 1 modem adaptive answer
# DATAINIT="$DATAOPT -j+FAA=1"		# Class 2[.0] modem adaptive answer
# DATAINIT="$DATAOPT -oa"		# software adaptive answer
# DATAINIT="$DATAOPT"			# data-only answer

# If you have a voice modem and want to answer in voice mode
# define VOICEINIT to be the options that enable voice mode.  You
# must also set VCMD below. Voice support is not yet available.

# VOICEINIT="-j#CLS=8"			# Rockwell voice modems
# VOICEINIT="-jM2L2#CLS=8#VLS=4"	#    with speaker on

# Argument to exec(2) of "/bin/sh -c" for incoming data calls.
# This command will usually exec getty(8) but can include other
# commands to set up the serial port, etc.  Up to 6 %d arguments
# are replaced by the baud rate following the CONNECT response
# from the modem or 19200 if none.  If using getty_ps ensure
# /etc/gettydefs has entries for all possible %d values
# (e.g. 19200). Use 'nice' if required to reduce any special
# priority set by NICE.

DCMD="exec /sbin/getty -h $DEV %d vt100"	# for getty_ps (Linux)
# DCMD="exec /sbin/agetty -h $DEV %d vt100"	# for agetty (Linux)
# DCMD="exec pppd $DEV %d"			# start PPP server

# Argument to exec(2) of "/bin/sh -c" for incoming voice calls.
# This command will usually be a shell script that interacts with
# the caller by using efone to play/record audio and detect DTMF
# tones.  Up to 6 %d arguments are replaced by the modem file
# descriptor.  VCMD can "exec fax reanswer" to switch to fax or
# data mode if required.

FONE=/usr/bin/fone				# minimal voice mail
VCMD="exec $FONE %d"

# The owner.group and mode to which "fax answer" sets the serial
# device.  This allows non-root processes to grab the device from
# efax even if a previous process (e.g. login) has changed it.
# Comment out if you don't need to reset device ownership.

OWNER=root.tty		# typical
MODE=666		# anybody
# MODE=660		# only owner & group

# Regular expression for efax exit codes in log files that will
# *not* be saved.  For example, use [145] to ignore exits due to
# `locked' (1), `no modem' (4), and `signal' (5) conditions

NOLOG='[145]'

# ****************************************************************
# --- End of user configuration section ---
# ****************************************************************

# --- source configuration files

for f in $CONFIGFILES
do
	if [ -r $f ]
	then
		. $f
	fi
done

# --- set any variables given on command line

while : ; do
	case $# in 0) break ;; esac
	case "$1" in [A-Z]*=*) eval $1 ; shift ;; *) break ;; esac
done

# -------- initialize 

ERR=0

$NICE true 2>/dev/null ; case $? in 0) ;; *) NICE="" ;; esac

# --- check for a command or alias and optional flags

cmd=""
case $0 in
*/faxlpr|faxlpr) cmd=faxlpr ;; 
*) 
	while : ; do
	case $# in 0) case $cmd in '') cmd=receive ;; esac ; break ;; esac
   	case $1 in 
	-l) OPT="$OPT -l" ; RES=204x98 ; shift ;; 
	-h) OPT="$OPT -h" ; RES=204x196 ; shift ;; 
	-v) OPT="$OPT -v" ; VERB=$VERBLOG ; shift ;; 
	*) 
		case $cmd in '') cmd=$1 ; shift ;; *) break ;; esac
	;;
   	esac
	done
;; 
esac


# -------- If answer mode use the optional answer device

if [ "x$cmd" = "xanswer" ]; then
	if [ "x$DEVANSWER" != "x" ]; then
		DEV=$DEVANSWER
	fi
fi

# -------- resolve dependencies on command-line arguments

eval LOCK=\"$LOCK\"			# depends on DEV

# make device name w/o directories

case $DEV in
	*/*) DEVN=`echo $DEV|sed -e s./._.g` ;;
	*) DEVN=$DEV ;;
esac

case $PAGE in
	letter)	PAGEDIM="$PAGE_letter" ;;
	legal) 	PAGEDIM="$PAGE_legal" ;;
	a4) 	PAGEDIM="$PAGE_a4" ;;
	*) 	echo "Error: PAGE=\"${PAGE}\" not valid." ; exit 2 ;;
esac	

# -------- functions

faxmail () {
   echo "Subject: fax/message from $REMID : $FILES"
   echo "Mime-Version: 1.0"
   echo "Content-Type: multipart/mixed; boundary=EFAX_MAIL"
   echo ""
   echo "--EFAX_MAIL"
   echo "Content-Type: text/plain; charset=\"us-ascii\""
   echo "Content-Transfer-Encoding: 7bit"
   echo ""
   cat $f
   for f in $FILES
   do
     echo "--EFAX_MAIL"
     echo "Content-Type: image/tiff; name=\"$f.tiff\""
     echo "Content-Transfer-Encoding: base64"
     echo "Content-Disposition: attachment; filename=\"$f.tiff\""
     echo ""
     $EFIX -M <$f
     echo "--EFAX_MAIL--"
   done
   echo "--EFAX_MAIL--"
}

# -------- export variables for fone script

export DEV TSTAMP

# -------- do the appropriate command

while : ; do 	# so we can use `break' to get to the end of the script

case $cmd in 

# fax answer : clean up logs and exec efax. normally run by launchd(8).

	answer)

	if cd $FAXDIR ; then :
	else
		echo "Error: $FAX cannot cd to $FAXDIR" >>$CONSOLE
		sleep 30
		break
	fi

	umask $UMASK
	case $OWNER in '') ;; *) chown $OWNER /dev/$DEV ;; esac
	case $MODE  in '') ;; *) chmod $MODE  /dev/$DEV ;; esac

	for f in ${DEVN}.[0-9]*  	# clean up old log files
	do
	  if [ -r $f ]
	  then
	    egrep	"done, returning $NOLOG|exec'ing" $f >/dev/null 2>/dev/null
	    case $? in
	    1)    FILES=`sed -n -e  '/received ->/s/^.*-> \(.*\)$/\1/p' $f`
		  FILES=`echo $FILES`
		  REMID=`sed -n -e '/remote ID ->/s/^.*-> \(.*\)$/\1/p' \
			  -e tok -e b -e ':ok' -e q $f`
		  case $REMID in '') REMID='?' ;; esac
		  eval $NOTIFY
	    ;;
	    esac

	    echo   >>${LOGDIR}/${DEVN}.log && \
	    cat $f >>${LOGDIR}/${DEVN}.log && \
  	    $RM $f || \
	    echo "Error: $FAX cannot save log files" >>$CONSOLE
	  fi
	done	

	while [ -f ${DEVN}.stop ] ; do sleep 15 ; done

	exec $NICE $EFAX -v "" -v "$VERBLOG" -d/dev/$DEV $INIT $SPKR \
	$CLASSINIT $FCINIT $RXINIT $LOCK \
	$RXCAP -l "$FROM" $RESET \
	$DATAINIT -g "$DCMD" $VOICEINIT -e "$VCMD" \
	-jS0=$ANSRINGS -w -s -r "$ANSFNAME" 2>$CONSOLE >${DEVN}.$$

	echo ERROR: $FAX answer exec failed >>$CONSOLE ; sleep 30

	break
	;;


# fax reanswer : switch from voice mode to fax[/data] mode

	reanswer)

	# we should already be in the fax spool directory, the
	# device locked, the modem answered and initialized in
	# voice mode and stdout/stderr redirected appropriately

	umask $UMASK

	exec $NICE $EFAX -v "" -v "$VERBLOG" -d/dev/$DEV '-i#CLS=0' \
	$CLASSINIT $FCINIT $RXINIT \
	$RXCAP -l "$FROM" $RESET \
	$DATAINIT -g "$DCMD" \
	-r "$ANSFNAME"

	echo ERROR: $FAX reanswer exec failed >>$CONSOLE ; sleep 30

	break
	;;

# fax queue : list received fax files

	q*)

 	cd $FAXDIR
 	case $? in 0) ;; *) echo "cannot cd to $FAXDIR" ; break ;; esac
 
 	for f in [0-9]*.[0-9][0-9][0-9] [0-9]*.v
	do
		if [ -r $f ]
		then
			echo
			echo Fax files in `pwd` :
			echo
			${LS} -l [0-9]*.[0-9][0-9][0-9]  [0-9]*.v 2>/dev/null
			echo
		       	break
 		fi
	done

	break 
	;;	

# faxlpr : get phone number and user from current cf* file and run fax send 

	faxlpr)

	# display permissions for debugging
	echo "$0: running as:" >&2 ; id -a >&2
	${LS} -ld $FAXDIR >&2

	# the lpr spool directory for printer 'fax'
	if ! cd $FAXDIR
	then 
		echo "$0: cannot cd to $FAXDIR" >&2 ; break 
	fi

	if ! test -r lock
	then 
		echo "$0: can't read lock file" >&2  ; break 
	fi
	
	cfile=`tail -1 lock`

	if ! test -r $cfile
	then
		echo "$0: can't read control file" >&2  ; break 
	fi

	cfile=`cat $cfile`

	num=` echo "$cfile" | sed -e /^[^J]/d -e s/.//`
	host=`echo "$cfile" | sed -e /^[^H]/d -e s/.//`
	user=`echo "$cfile" | sed -e /^[^P]/d -e s/.//`

	if ! test "$num"
	then
		echo "$0: can't read phone number" >&2  ; break 
	fi

	# save stdin in a file
	if ! cat - >> fax$$
	then
		echo "$0: can't write `pwd`/fax$$" >&2  ; break 
	fi

	l=`$FAX send "$num" fax$$`

	case $? in
	0) echo "$l" | mail -s "fax to $num succeeded" $user@$host ;;
	*) echo "$l" | mail -s "fax to $num failed   " $user@$host ;;
	esac

	$RM fax$$ fax$$.???

	break 
	;;	

# fax start/stop/status : manage fax receive daemon

	start|stop|st*)		# common section

	cd $FAXDIR ; 
	case $? in 0) ;; *) echo "cannot cd to $FAXDIR" ; break ;; esac

	n= ; for f in ${DEVN}.[0-9]* ; do logfile="$f" ; n=x$n ; done

	case $n in 
	xx*) echo Warning: multiple logs for $DEV : ; ${LS} ${DEVN}.[0-9]* ;;
	esac

	case $logfile in 
	*\*) echo no fax answer process for device $DEV ; break ;;
	esac

	efaxpid=`echo $logfile | sed -e "s/${DEVN}\.//g"`

	case $cmd in

# fax start - remove stop file so fax answer will continue

	start)

	if [ ! -w . ] ; then echo "can't write  `pwd`" ; break ; fi
        $RM ${DEVN}.stop
	break 
	;;

# fax stop - make a stop file and kill current fax answer daemon

	stop)

	if [ ! -w . ] ; then echo "can't write `pwd`" ; break ; fi
	touch ${DEVN}.stop
	echo stopping fax daemon for ${DEV}, pid=$efaxpid
	kill -HUP $efaxpid
	break 
	;;


# fax status - display pid and log file for current daemon

	st*)

	if [ -f ${DEVN}.stop ] ; then stat="(set to stop)" ; fi

      	if ps -u $efaxpid 2>/dev/null ; then :
      	else
		echo "NOT ACTIVE (last daemon was $efaxpid)"
      	fi

	echo
	echo from: $FAXDIR/$logfile
	echo

	egrep "Warning|Error|starts|activity|opened|received -|done" $logfile

	case $# in 
	0) ;; *) echo "---------------" ; sleep $1 ; exec $FAX status $1 ;;
	esac

	break
	;;

	esac	# common section
	;;

# fax makefont : rasterize a PS font into a 256-character-wide bitmap

	makefont)

	if [ $# -lt 5 ]
	then
        	echo Usage: fax makefont fontname fontsize \
			cellwidth cellheight filename
		echo "(cellwidth and cellheight in pixels, fontsize in points)"
		echo "Example: fax makefont Courier-Bold 8 16 24 efaxfont"
		echo "will make an 8pt font (there are about 3 pixels per pt)"
        	exit 1
	fi

	FNTFMT=pbmraw	# format for font files
	# FNTFMT=tiffg3	# smaller, available with Ghostscript 3.x or later

	pelwidth=`expr 256 \* $3`
	gs -q -sDEVICE=$FNTFMT -r204x196 -g${pelwidth}x$4 \
		-sOutputFile=$5 - <<EOF
        /$1 findfont $2 scalefont setfont 
        /buf 1 string def
        /dx $3 204 div 72 mul def	% x offset per character
        0 1 255 { 
           dup dx mul 0.7 add 3 moveto
           buf exch 0 exch put 
           buf show
        } for
        showpage
EOF
	break
	;;

# fax make : convert a text or Postscript file to fax format

	m*)

	case $# in 0) echo "No files specified" ; ERR=2 ; break ;; esac

	if [ ! -r $1 ] ; then echo "Can't read $1" ; ERR=2 ; break ; fi


	read x <$1
	case $x in
	%!*|?%!*)
		echo "$1 is postscript..."
		# GS can't deal with long paths so we 'cd' 
		DIRNAME=`dirname $1` ; BASENAME=`basename $1`
		( cd $DIRNAME ; \
		$GS -q -sDEVICE=tiffg3 -r$RES -dNOPAUSE -dSAFER \
		-sOutputFile=$BASENAME.%03d \
		-sPAPERSIZE=$PAGE \
		$BASENAME </dev/null >/dev/null )
		;;
	II*|MM*|P4*)
		echo "$1 is an image file..."
		$EFIX -ve -otiffg3 -p$PAGEDIM -r$RES -n $1.%03d $1
		;;
	*)	echo "$1 is text..."
		$EFIX -ve -otiffg3 -p$PAGEDIM -r$RES -n $1.%03d $TEXTFONT $1
		;;
	esac

	break
	;;

# fax send : fax files to given number, converting first if necessary

	s*)
	
	case $# in
	0) echo "missing phone number to call" ; ERR=2 ; break ;;
	esac

	# look up names

	case $1 in 
		[A-Za-z]*) 
		for f in $DIRFILES ; do
			if [ -r $f ] ; then TELNO=`$LOOKUP` ; fi
			case "$TELNO" in '') continue ;; *) break ;; esac
		done
		case "$TELNO" in
			'') echo "Name lookup for $1 failed" ; ERR=2 ; break ;;
			*) echo "Lookup: $1 = $TELNO" ;;
		esac
		;;
		*) TELNO="$1" ;;
	esac

	shift 

	case "$TO" in '') TO="$TELNO" ;; *) ;; esac

	TELNO=`echo $TELNO|sed "s/[ 	()][ 	()]*//g"`

	# handle manual dialing and number->dial string conversions

	case "$TELNO" in
	-m*)	MANINIT="-jX3" ; TELNO="" ;;
	+*)	TELNO=`echo $TELNO | $TELCVT` ;;
	esac
	
	case $TELNO in 
	'') 	;; 
	*)	TELNO="${DIALPREFIX}${TELNO}${DIALSUFFIX}" ;; 
	esac

	# use `fax make' to convert files if they need to be updated

	FILES=""
	for f in $* ; do
		case $f in -) FILES="$FILES -" ; continue ;; esac
		if [ ! -r $f ] ; then
	      		echo "can't read file $f" ; ERR=2 ; break 2 
		fi
		case $f in
		*.[0-9][0-9][0-9]) FILES="$FILES $f" ;;	# skip image files
	   	*)	if echo ${f}.001: $f \; x | make -r -q -f - ; then
				echo ${f}.nnn is up-to-date
			else
	 			$RM ${f}.[0-9][0-9][0-9]
	 			$FAX make $OPT $f
			fi
			if [ -r $f.001 ] ; then 
                		FILES="$FILES $f.[0-9][0-9][0-9]"
	      		else		# something's wrong, catch it later
	        		FILES="$FILES $f.001"
	      		fi
			;;
		esac
        done

	# check that all files are OK

	for f in $FILES ; do
		case $f in -) continue ;; esac
		if [ ! -r $f ] ; then
	      		echo "can't read file $f" ; ERR=2 ; break 2 
   	   	fi
	done

	# send it

	for s in 0 $FAILRETRIES ; do

	case $s in
	0) ;; *) echo "Will try again in $s seconds" ; sleep $s ;;
	esac

#	logfile=`$TSTAMP`.log
        logfile="$TELNO".log

	for t in 0 $BUSYRETRIES ; do

		case $t in 
		0) ;; *) echo "Will try again in $t seconds" ; sleep $t ;;
		esac

		DATE=`eval "$DATECMD"`
		eval HDR=\"$HDR\"

		$NICE $EFAX -v "$VERB" -v "$VERBLOG" \
		-d/dev/$DEV $LOCK $INIT $SPKR \
		$CLASSINIT $FCINIT $TXINIT \
		$TXCAP -l "$FROM" $RESET $HDRFONT -h "$HDR" \
		$MANINIT -t "$TELNO" $FILES >$logfile

		ERR=$?

		case $ERR in
		0)	$RM $logfile ; break 2 ;;
		1)	echo Busy... ;;
		*)	echo "There were errors (see ${logfile})." ; break ;;
		esac

	done

	SENT=` sed -n -e '/sent ->/s/^.*-> \([^ ]*\).*/\1/p' $logfile`
	FILES=`sed -n -e '/failed ->/s/^.*-> \([^ ]*\).*/\1/p' $logfile`
	case $SENT  in '') break ;; esac
	case $FILES in '') break ;; esac
	echo Failed...

	done

	break 
	;;

# fax hangup : hang up the phone

	hangup*)
	$NICE exec $EFAX -v $VERB -d/dev/$DEV $LOCK -iZ -T 
	break
	;;

# fax fone : open modem device and exec fone script

	fone)
	
 	cd $FAXDIR
 	case $? in 0) ;; *) echo "cannot cd to $FAXDIR" ; break ;; esac
 
	$NICE exec $EFAX -v $VERB -d/dev/$DEV $LOCK $INIT \
		-j#CLS=8 -a#VLS=1 -e "$VCMD $*"

	break
	;;

# fax (rm|print|view) commands possibly on files in spool directory

	rm|p*|v*)	# common code

	# switch to spool directory if first file is found there

	for f in $FAXDIR/$1 ; do 
		if test -r $f ; then cd $FAXDIR ; break ; fi
	done
	
	for f in $* ; do
		case $cmd in 

		rm)	# fax rm : delete files
		if $RM $f ; then echo deleted $f ; fi
		;;

	        p*) 	# fax print : print files
  		echo "$f ... "
		eval "$PRINT | $PRCMD"
		;;
		
		v*)	# fax view : display images
  		echo "$f ... "
		eval "$VIEW | $VIEWCMD"
		;;

		esac
	done

	break
	;;

# fax [receive] : answer phone now and receive fax files

	r*)
	
	case $1 in '') file=`$TSTAMP` ;; *) file=$1 ;; esac
	logfile=${file}.log

	$NICE $EFAX -v "$VERB" -v "$VERBLOG" -d/dev/$DEV $LOCK $INIT $SPKR \
	$CLASSINIT $FCINIT $RXINIT \
	$RXCAP -l "$FROM" $RESET \
	-r $file >$logfile

	ERR=$?

	case $ERR in
	0)	$RM $logfile ; break ;;
	1)	echo Busy... ;;
	*)	echo "There were errors (see ${logfile})." ; break ;;
	esac

	break
	;;

# fax new : create a cover page for a fax (needs work)

	new)

	fname=${1-new.fax}
	DATE=`date "+%B %d %Y"`
	cat >$fname 2>/dev/null << EOF

	________________________________________________

			 FAX COVER PAGE
	________________________________________________

	 To:	x
	fax:

	________________________________________________

	From:	$NAME
	 fax:	$FROM

	Date:	$DATE

	Pages:	1 (including this page)

	________________________________________________

EOF
	${VISUAL-${EDITOR-vi}} $fname

	break
	;;

# fax help : show command arguments

	-\?|\?|-h*|h*)

cat 1>&2 <<EOF
 Usage: 

   fax [ r[eceive] [-v] [filename-prefix] ]
   fax m[ake] [-l] { postscript-file-name | text-file-name }
   fax s[end] [-l] [-v] { -m | telephone-number } filename...
   fax { p[rint] | v[iew] | rm } [-l] filename...

   fax [ stop | start | st[atus] | q[ueue] ]
   fax answer

 use -l to create low resolution (98 lpi) faxes
 use -m if the number has been dialed manually 	
 use -v for verbose output 

 if given no arguments, answers the phone and receives a fax.

 use VAR=value to set variables (e.g. "fax DEV=cua2 receive")

 session logs are written to a file with the date/time as the
 file name and extension of .log (except for automatic reception).

 fax device is /dev/$DEV, incoming spool directory is $FAXDIR

EOF

	ERR=1
	break
	;;

	*)
	echo "Error. Invalid command (${cmd})" ; ERR=2 ; break
	;;

esac	
done

exit $ERR
